{
  "id": "nuclear-chain-reaction",
  "title": "Nuclear Chain Reaction",
  "lang": "en",
  "source_lang": "en",
  "summary": "A nuclear chain reaction is a sequence of nuclear reactions sustained when particles produced by one reaction trigger further reactions.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Atomic chain reaction",
    "Fission chain reaction"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/nuclear-chain-reaction/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/nuclear-chain-reaction/",
      "json": "https://aiwiki.page/zh/nuclear-chain-reaction.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A nuclear chain reaction is a sequence of nuclear transformations in which particles released by one event cause additional events of the same general kind. Its most important practical form is the neutron-induced fission chain reaction: an atomic nucleus splits, releasing energy and neutrons, and some of those neutrons induce further fissions. When enough neutrons survive to reproduce the process, the reaction can sustain itself without a continuing external neutron source.\n\nControlled fission chains provide the heat used in nuclear power stations and the neutron fields used in research reactors. Rapidly growing, uncontrolled chains also underlie fission weapons and certain criticality accidents. These outcomes depend not simply on the amount of nuclear material present, but on its isotopic composition, arrangement, surroundings, and changing physical condition.\n\nThe subject brings together nuclear reaction probabilities, neutron transport, radioactive decay, and thermal feedback. A central distinction is between the ability of a system to sustain a chain and the rate at which that chain changes: a steady nuclear reactor is critical, whereas a growing chain is supercritical. Neither term, by itself, specifies the system’s power or its safety."
    },
    {
      "heading": "Physical basis of neutron multiplication",
      "text": "The relevant processes occur within the atomic nucleus, rather than among the electrons responsible for ordinary chemical reactions. In a typical neutron-induced fission, an incident neutron is absorbed by a heavy nucleus, creating an excited compound nucleus that can split into two principal fragments. Additional neutrons, gamma radiation, and energy are released. Because neutrons have no electric charge, they do not face the electrostatic repulsion that charged particles encounter when approaching a positively charged nucleus.\n\nA representative fission channel is\n\n\\[{}^{235}_{92}\\mathrm{U}+{}^{1}_{0}\\mathrm{n} \\rightarrow {}^{141}_{56}\\mathrm{Ba} + {}^{92}_{36}\\mathrm{Kr} + 3\\,{}^{1}_{0}\\mathrm{n}.\\]\n\nThis equation is an illustrative channel, not a statement that uranium-235 always produces these fragments or exactly three neutrons. Fission produces a distribution of fragment masses, and the number of emitted neutrons varies from event to event. For uranium-235 undergoing thermal-neutron fission, the average total neutron yield is approximately 2.4 neutrons per fission. The corresponding yield depends on both the fissioning isotope and the energy of the incident neutron.\n\nThe energy release reflects differences in nuclear binding energy between the original nucleus and its products. Through mass–energy equivalence, a small decrease in total rest mass appears as released energy. The commonly quoted scale is about 200 million electronvolts per fission, although precise totals depend on the isotope and on which subsequent decay energies are included. Most immediately deposited energy appears as the kinetic energy of fission fragments, which slow down over very short distances in surrounding material. Neutrons, gamma rays, and later radioactive decays account for other portions; antineutrinos carry away energy that is generally not recovered as heat.\n\nA chain reaction requires more than an energy-releasing event. It requires a reproductive connection between events. Many nuclear transformations release energy but do not generate particles capable of sustaining another generation under the prevailing conditions. Likewise, a neutron produced by fission may escape, be absorbed without causing fission, or lose energy before interacting again. The competition among these possibilities determines whether multiplication continues.\n\nThe expression “chain reaction” also occurs in chemistry, where reactive intermediates propagate sequences of molecular reactions. The analogy concerns reproduction of an initiating agent, not identical mechanisms. Nor is a fission chain the same as nuclear fusion: fusion combines light nuclei, and its sustained operation depends on different reaction rates, energy balances, and confinement conditions."
    },
    {
      "heading": "Criticality and the neutron balance",
      "text": "The central measure of a fission chain is the effective neutron multiplication factor, \\(k_{\\mathrm{eff}}\\). Conceptually, it compares the number of fission neutrons in one generation with the number in the preceding generation, after accounting for absorption and leakage. In an idealized, unchanged system,\n\n\\[N_{g+1}=k_{\\mathrm{eff}}N_g,\\]\n\nwhere \\(N_g\\) denotes the neutron population associated with generation \\(g\\). Actual neutron populations overlap in time and occupy different positions and energies, so this generation model is a useful interpretation rather than a complete description.\n\nA system is subcritical when \\(k_{\\mathrm{eff}}<1\\), **critical** when \\(k_{\\mathrm{eff}}=1\\), and **supercritical** when \\(k_{\\mathrm{eff}}>1\\). In a subcritical system, a chain initiated by a finite neutron population eventually dies away unless additional neutrons are supplied. A critical system can maintain a steady chain. A supercritical system has an increasing neutron population if its material state remains unchanged. The concept of criticality therefore concerns neutron balance, not a particular temperature or power level. Reactors can be critical at very low power as well as at full operating power.\n\nAn idealized infinite medium has no neutron leakage and is characterized by an infinite-medium multiplication factor, \\(k_\\infty\\). A real finite assembly loses neutrons through its boundaries. Its effective multiplication factor consequently depends on geometry, dimensions, neutron energy, and surrounding materials as well as nuclear composition. A neutron reflector returns some outward-moving neutrons to the multiplying region; an absorbing surrounding material removes them. Changes in density can alter both the frequency of interactions and the probability of leakage.\n\nThe term critical mass is sometimes used as though it were a fixed property of a substance. More precisely, it is the mass associated with a specified critical configuration. Different shapes, isotope mixtures, concentrations, temperatures, and surroundings produce different critical conditions. Systems containing solutions or dispersed particles also depend strongly on how fuel and neutron-slowing materials are distributed. Mass alone is therefore insufficient to characterize their multiplication.\n\nA related quantity, reactivity, measures departure from criticality:\n\n\\[\\rho=\\frac{k_{\\mathrm{eff}}-1}{k_{\\mathrm{eff}}}.\\]\n\nPositive reactivity corresponds to a supercritical state, negative reactivity to a subcritical state. Reactivity is especially useful in time-dependent reactor analysis, where small changes in materials or operating conditions can substantially affect power evolution. Nevertheless, the same positive reactivity can lead to different rates of increase in systems with different neutron lifetimes and delayed-neutron properties."
    },
    {
      "heading": "Neutron energies, nuclear materials, and moderation",
      "text": "Whether a neutron causes fission depends strongly on its energy and the nucleus it encounters. This dependence is described using a neutron cross section, a measure of the probability of a specified interaction. Cross sections are not simply geometric areas of nuclei. They express quantum-mechanical reaction probabilities and can exhibit sharp resonances. The corresponding interaction probability per unit path length also depends on the number of target nuclei per unit volume.\n\nA fissile material can sustain a fission chain with low-energy neutrons under suitable conditions. Important fissile isotopes include uranium-235, plutonium-239, and uranium-233. The broader term fissionable includes nuclei that can undergo fission but generally require more energetic incident neutrons. Uranium-238, for example, can undergo fast-neutron fission but does not sustain an ordinary thermal-neutron chain by itself. Natural uranium contains approximately 0.7 percent uranium-235, with nearly all the remainder being uranium-238.\n\nNeutrons emitted promptly in fission generally have energies on the scale of millions of electronvolts. In a thermal reactor, they lose much of this energy through collisions with a neutron moderator. Light water, heavy water, and sufficiently pure graphite are established moderator materials. Elastic scattering transfers neutron kinetic energy to moderator nuclei; collisions with light nuclei can remove a relatively large fraction of the neutron’s energy. After repeated collisions, neutrons approach an energy distribution governed by the temperature of the medium. A commonly used reference thermal-neutron energy is about 0.025 electronvolt near room temperature.\n\nAn effective moderator must slow neutrons while absorbing relatively few of them. Ordinary water is an excellent slowing medium, but its hydrogen also captures some neutrons. Heavy water absorbs fewer neutrons and permits different fuel arrangements. Graphite’s usefulness similarly depends on keeping neutron-absorbing impurities low. Moderation is therefore a neutron-economy problem, not merely a question of reducing neutron speed.\n\nNot all reactors use extensive moderation. Fast reactors maintain a harder neutron spectrum and use a different balance of fission, capture, and leakage. Their behavior cannot be inferred simply by applying thermal-reactor intuition. Even in a thermal reactor, neutrons pass through intermediate energies where resonance absorption—particularly in uranium-238—can remove them before they reach thermal energies.\n\nFuel heterogeneity also matters. Separating fuel into rods or other elements within a moderator changes how neutrons encounter resonance absorbers and where they induce fission. Consequently, neutron multiplication depends on spatial arrangement at several scales, from individual fuel regions to the whole core. Material identity and bulk composition alone do not fully determine the chain."
    },
    {
      "heading": "Prompt and delayed neutrons in reactor kinetics",
      "text": "Most fission neutrons emerge almost immediately from the fission process and are called prompt neutrons. A small fraction appears later when certain neutron-rich fission products undergo radioactive decay and leave daughter nuclei capable of emitting a neutron. These are delayed neutrons. They are not neutrons that simply move slowly through the reactor: their delay occurs because a radioactive precursor exists for a measurable time before neutron emission.\n\nFor thermal-neutron fission of uranium-235, the total delayed-neutron fraction is roughly 0.0065, or 0.65 percent. Its value varies by isotope and incident-neutron energy. Plutonium-239 has a substantially smaller delayed fraction. Reactor calculations frequently use an effective delayed-neutron fraction, \\(\\beta_{\\mathrm{eff}}\\), which accounts for the differing importance of neutrons according to where and at what energy they enter the chain. Delayed-neutron precursors span a range of decay times and are commonly represented by several groups.\n\nThis small delayed component has a large operational effect. A reactor can be supercritical when all neutrons are counted while remaining subcritical on prompt neutrons alone. In this delayed-supercritical condition, precursor decay substantially influences the rate of power increase, making controlled changes possible on useful engineering timescales. At prompt criticality, prompt neutrons alone suffice to sustain the chain. Beyond that threshold, power can change much more rapidly.\n\nA standard approximation, called point kinetics, describes the neutron population and delayed-neutron precursors without explicitly resolving the evolving spatial shape:\n\n\\[\\frac{dn}{dt} = \\frac{\\rho-\\beta_{\\mathrm{eff}}}{\\Lambda}n + \\sum_i\\lambda_i C_i + S,\\]\n\n\\[\\frac{dC_i}{dt} = \\frac{\\beta_i}{\\Lambda}n-\\lambda_i C_i.\\]\n\nHere \\(n\\) represents neutron population or a proportional power variable, \\(\\Lambda\\) is an effective prompt generation time, \\(C_i\\) is the population of precursor group \\(i\\), \\(\\lambda_i\\) is its decay constant, \\(\\beta_i\\) is its effective delayed fraction, and \\(S\\) is an external neutron source. The model is powerful when the spatial neutron distribution changes little, but spatially resolved calculations are needed when local conditions evolve strongly.\n\nThere is consequently no universal “time between generations” suitable for all nuclear chains. Prompt neutron histories depend on spectrum, scattering, absorption, and leakage; delayed neutrons introduce much longer timescales through radioactivity. A thermal reactor and a fast reactor can therefore respond differently even when their multiplication factors are similar. Moreover, actual power evolution changes temperatures and material distributions, which in turn change reactivity. Neutron kinetics and material response must ultimately be treated together."
    },
    {
      "heading": "Feedback, control, and changes in fuel composition",
      "text": "A working nuclear reactor is not a static collection of nuclei. Fission raises fuel temperature, heats coolant, changes material densities, and gradually alters isotopic composition. These changes influence neutron multiplication through feedback. A negative reactivity feedback tends to oppose the initiating change; a positive feedback tends to reinforce it. The sign and strength of a feedback depend on reactor type and operating state, rather than on a universal property of nuclear energy.\n\nOne important response is Doppler broadening of neutron-absorption resonances. As fuel temperature rises, the thermal motion of nuclei broadens resonance features as experienced by incident neutrons. In common uranium-bearing fuels, this generally increases effective resonance absorption in uranium-238 and adds negative reactivity. This fuel-temperature effect acts rapidly because the fuel itself receives most of the immediate fission energy.\n\nModerator and coolant responses involve different mechanisms. Heating may lower a liquid’s density or produce steam voids. If the liquid serves as a moderator, these changes alter slowing-down rates, neutron absorption, and leakage simultaneously. In many light-water reactor operating conditions, decreasing moderator density adds negative reactivity, but the result is design- and state-dependent. In some other reactor configurations, coolant loss or void formation can instead add positive reactivity. A single label such as “water-cooled” is insufficient to determine the response.\n\nMovable control rods introduce neutron-absorbing materials into selected regions of a core. Boron, cadmium, and hafnium are examples of elements used in control or shutdown systems. Some reactors also use dissolved absorbers or burnable absorbers incorporated into fuel-related components. These devices influence neutron losses; they do not operate by physically blocking all fission events. The distribution of absorption matters because changing the local neutron field also changes the spatial pattern of power generation.\n\nFission products create additional, time-dependent absorption. Xenon-135 is especially important because of its exceptionally large thermal-neutron absorption cross section. It is produced directly in fission and, more importantly, through decay chains involving iodine-135, whose half-life is about 6.6 hours. Xenon-135 has a half-life of about 9.1 hours and is also removed by neutron capture during operation. After shutdown, xenon absorption can initially increase because iodine continues to decay while neutron-induced xenon removal falls sharply.\n\nOver longer periods, fissile material is consumed, new isotopes form by neutron capture and decay, and other absorbing fission products accumulate. Fuel management therefore addresses both the immediate neutron balance and the changing composition over months or years. Control systems, inherent feedbacks, and fuel evolution operate on distinct but interacting timescales."
    },
    {
      "heading": "Discovery and the first self-sustaining chain",
      "text": "The chain-reaction concept preceded a clear understanding of nuclear fission. In 1932, James Chadwick established the existence of the neutron, providing a particle capable of entering nuclei without Coulomb repulsion. In 1933, Leo Szilard conceived the possibility that a neutron-induced nuclear reaction might emit additional neutrons and thereby sustain a chain. At that time, however, no suitable reaction had been demonstrated, and the later fission mechanism was unknown.\n\nDuring the 1930s, Enrico Fermi and collaborators investigated neutron-induced radioactivity and the effects of slowing neutrons in hydrogen-containing substances. These experiments showed that neutron energy could profoundly alter nuclear reaction probabilities. Their uranium results were initially interpreted without recognizing fission, illustrating how the discovery required both chemical identification and a new nuclear explanation.\n\nIn December 1938, Otto Hahn and Fritz Strassmann obtained chemical evidence that neutron-irradiated uranium produced barium. Lise Meitner and Otto Frisch interpreted the result as the splitting of a heavy nucleus; their explanation appeared in early 1939. Frisch introduced the term fission by analogy with biological division and obtained physical evidence consistent with energetic fission fragments. Subsequent experiments in 1939 established that uranium fission released additional neutrons, making a self-sustaining chain physically plausible.\n\nThe problem then shifted from identifying an individual reaction to constructing a complete neutron economy. Researchers had to establish whether enough neutrons would survive absorption and leakage in a macroscopic assembly. Material purity was crucial: small amounts of strongly absorbing impurities could invalidate an otherwise promising arrangement. Measurements of neutron absorption, production, moderation, and multiplication became central to feasibility studies, while wartime conditions increasingly restricted the circulation of results.\n\nOn 2 December 1942, Fermi’s team achieved the first human-made, controlled, self-sustaining nuclear chain reaction in Chicago Pile-1, built beneath the stands of Stagg Field at the University of Chicago. The assembly used uranium-bearing material and graphite, with neutron-absorbing control devices. It operated initially at very low power. Its significance was the demonstration of sustained neutron multiplication under controlled conditions, not the production of useful electricity.\n\nDuring World War II, this achievement became part of the broader development of reactors for producing nuclear materials and of nuclear weapons. Later reactor programs separated into numerous research, power, propulsion, and isotope-production designs. The historical progression—from neutron discovery to fission identification to a controlled chain—also established reactor physics as a discipline concerned with collective behavior rather than isolated nuclear events alone."
    },
    {
      "heading": "Engineered uses and the nuclear fuel cycle",
      "text": "In a power reactor, the chain reaction supplies heat that is transferred through engineered cooling systems and converted into mechanical and then electrical energy. Many plants use steam turbines, although coolant arrangements and thermodynamic cycles differ. The chain itself does not directly produce ordinary electric current. Electrical output depends on the thermal conversion system as well as reactor thermal power, so thermal and electrical power ratings must be distinguished.\n\nThe scale of fission energy makes a relatively small reaction rate sufficient for substantial heat production. Using approximately 200 megaelectronvolts per fission, a thermal output of one gigawatt corresponds to roughly \\(3\\times10^{19}\\) fissions per second. This is an order-of-magnitude relationship rather than a complete plant energy accounting. Recoverable energy varies with isotope and includes energy deposited after the original fission, whereas energy carried away by antineutrinos largely escapes.\n\nResearch reactors emphasize neutron availability rather than commercial electricity generation. Their neutron fields support diffraction studies, irradiation experiments, materials testing, and radioisotope production. Neutron techniques complement X-ray methods because neutrons interact with nuclei rather than primarily with electron distributions. Some reactors provide intense beams for studying magnetic structures, light elements, or internal material stresses. Others are designed around irradiation positions for targets or experimental fuel.\n\nThe chain reaction also participates in the nuclear fuel cycle by converting one isotope into another. Uranium-238 can capture a neutron to form uranium-239, which undergoes beta decay through neptunium-239 to plutonium-239. Thorium-232 can similarly lead, through intermediate nuclei, to uranium-233. Such starting materials are called fertile because neutron capture and subsequent transformations can produce fissile material. These conversion processes compete for neutrons with the fissions needed to sustain the chain and with other absorptions and losses.\n\nA breeder system produces more fissile material than it consumes over a specified accounting boundary and interval. This is not guaranteed merely by including fertile material in a reactor. It requires an adequate neutron balance and depends on fuel processing assumptions, leakage, absorption, and the isotopes involved. Conventional reactors also produce some new fissile material during operation, even when they are not net breeders.\n\nSubcritical multiplying assemblies offer a different use of the same physics. A continuing external neutron source drives fission in a system with \\(k_{\\mathrm{eff}}<1\\); removing that source causes the source-driven chain component to decline. Such assemblies are used in experiments and are studied for accelerator-driven applications. Their subcriticality does not eliminate radioactive decay heat or the need for thermal management."
    },
    {
      "heading": "Shutdown, accidents, and explosive chain reactions",
      "text": "Stopping a self-sustaining chain does not immediately stop all nuclear heat production. Fission fragments include many unstable nuclei whose decays release beta particles and gamma radiation. This decay heat continues after shutdown, even when the neutron population has fallen sharply. Following prolonged operation, it can initially amount to several percent of the preceding operating thermal power, then decrease over time. Its precise magnitude depends on irradiation history, fuel composition, and elapsed time.\n\nThis distinction separates two major safety questions: maintaining control of neutron multiplication and removing heat from radioactive material. A reactor can be subcritical yet still require substantial cooling. Conversely, a low-temperature collection of fissile material can become critical if its arrangement or composition changes. Nuclear safety therefore includes both reactor behavior and the handling, processing, storage, and transport of nuclear materials outside reactors.\n\nA criticality accident is an unintended self-sustaining or rapidly multiplying fission chain. Such events have occurred in fuel-processing facilities and experimental settings, not only in power reactors. Their behavior depends on how heating, expansion, boiling, or material movement changes reactivity. Some excursions terminate rapidly as the configuration changes; others can produce repeated pulses. The associated neutron and gamma radiation can be severe even when the total thermal energy is far below that of a large industrial explosion.\n\nA nuclear weapon uses a deliberately established, rapidly growing nuclear energy release. Its distinction from a controlled reactor is not simply that both contain material capable of fission. Reactor operation relies on controlled neutron balance, delayed-neutron behavior, heat removal, and engineered feedbacks. Weapon operation involves a radically different physical regime and purpose. A reactor accident should therefore not be described as an atomic-bomb explosion merely because a chain reaction is involved.\n\nExplosions associated with reactor accidents may instead arise from steam generation, chemical reactions, or combustible gases. These processes can interact with nuclear heating, but their immediate mechanisms are distinct. Accurate accounts separate a reactivity excursion, fuel damage, pressure-system failure, chemical explosion, and radioactive release rather than treating them as interchangeable events.\n\nEngineered protection uses several forms of independence: shutdown systems reduce multiplication, cooling systems remove heat, and barriers limit radioactive-material movement. Analysis also considers failures shared by multiple systems and the behavior of fuel and structures under abnormal conditions. The relevant physical question is not whether a chain reaction is inherently “controlled” or “uncontrolled” in the abstract, but how neutron multiplication, energy deposition, and material response evolve together."
    },
    {
      "heading": "Natural reactors and the calculation of chain behavior",
      "text": "Self-sustaining fission is not exclusively a human invention. In 1972, anomalous uranium isotopic measurements from ore associated with Oklo in Gabon led to the recognition of natural nuclear reactors. Geological and isotopic evidence showed that fission chains had operated there roughly two billion years earlier. These deposits preserve the products of ancient nuclear reactions within an identifiable geological setting.\n\nTheir existence depended on conditions different from those of present-day uranium deposits. Uranium-235 decays more rapidly than uranium-238, so its proportion in natural uranium was higher in the distant past—around 3 percent at the time of Oklo, compared with about 0.7 percent today. Suitable uranium concentrations, relatively low neutron-absorbing impurity levels, and groundwater moderation allowed some ore bodies to sustain fission. Changes in water availability could alter moderation and interrupt the chain.\n\nThe evidence is not based solely on missing uranium-235. Isotopic patterns in elements such as neodymium and samarium record fission production and neutron capture. These signatures help distinguish ancient reactor operation from ordinary chemical separation or radioactive decay. The deposits also provide information about the movement and retention of reaction products over geological times, although their behavior cannot be transferred unchanged to every modern waste-storage environment.\n\nFor both ancient and engineered systems, prediction requires neutron transport theory. The neutron population is distributed over position, direction, energy, and time. Transport equations balance neutron movement, scattering, absorption, production by fission, and external sources. Simplified diffusion methods can be effective where repeated scattering makes the angular distribution sufficiently smooth, but they are less reliable near strong boundaries, voids, or sharply heterogeneous regions.\n\nModern calculations use deterministic methods, which discretize the transport problem, and Monte Carlo methods, which sample many possible neutron histories. Both depend on evaluated nuclear data: reaction cross sections, fission yields, emitted-neutron spectra, and decay information. Their predictions are assessed against critical experiments, reaction-rate measurements, and operating data. Measurement uncertainty and uncertainty in nuclear data propagate into calculated multiplication factors and power distributions.\n\nA further complication is coupling. Neutron transport determines where heat is generated; heat transfer changes temperatures and densities; those changes modify neutron transport. Fuel depletion changes the isotope inventory, while deformation or coolant redistribution changes geometry. High-fidelity analysis therefore combines neutron physics with thermal hydraulics, material behavior, and nuclide evolution, selecting the necessary level of detail for the particular timescale and physical question."
    }
  ],
  "links": [
    "nuclear-fission",
    "atomic-nucleus",
    "neutron",
    "isotope",
    "nuclear-binding-energy",
    "mass-energy-equivalence",
    "electronvolt",
    "kinetic-energy",
    "chemistry",
    "nuclear-fusion",
    "criticality",
    "density",
    "graphite",
    "scattering",
    "water",
    "radioactivity",
    "nuclear-reactor",
    "feedback",
    "control-rod",
    "half-life",
    "enrico-fermi",
    "world-war-ii",
    "x-ray",
    "nuclear-fuel-cycle",
    "beta-decay",
    "nuclear-weapon",
    "measurement-uncertainty"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}