{
  "id": "mollweide-projection",
  "title": "Mollweide Projection",
  "lang": "en",
  "source_lang": "en",
  "summary": "The Mollweide projection is an equal-area, pseudocylindrical map projection that represents the world within an ellipse, widely used for global thematic and astronomical maps.",
  "category": "geography",
  "subcategory": "",
  "type": "concept",
  "aliases": [
    "Mollweide equal-area projection",
    "Babinet projection",
    "Homalographic projection",
    "Homolographic projection"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/mollweide-projection/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/mollweide-projection/",
      "json": "https://aiwiki.page/zh/mollweide-projection.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The Mollweide projection is an equal-area map projection that represents the entire surface of a sphere within an ellipse twice as wide as it is high. Introduced by the German mathematician and astronomer Karl Brandan Mollweide in 1805, it preserves the relative areas of regions while distorting their shapes, angles, and distances. It is widely used for world maps showing geographic distributions and for maps of the celestial sphere."
    },
    {
      "heading": "Geometry and appearance",
      "text": "The Mollweide projection belongs to the pseudocylindrical family: lines of latitude are straight and parallel, while most lines of longitude are curved. In its conventional equatorial orientation:\n\n- The equator is a horizontal straight line twice the length of the central meridian.\n- The central meridian is a vertical straight line.\n- Other meridians are elliptical arcs.\n- Parallels are horizontal lines whose spacing decreases toward the poles.\n- Each pole is represented by a single point.\n- The outer boundary is an ellipse with a width-to-height ratio of \\(2:1\\).\n\nThe two halves of the outer ellipse represent the meridian opposite the central meridian, split at the map’s edge. Changing the central meridian shifts the geographic focus and the position of this cut without changing the projection’s mathematical properties.\n\nUnlike a cylindrical projection, the Mollweide projection narrows toward the poles. This prevents the extreme enlargement of high-latitude areas associated with the Mercator projection, although substantial shape distortion remains near the outer boundary."
    },
    {
      "heading": "Mathematical definition",
      "text": "The standard equations describe a sphere of radius \\(R\\). Let \\(\\phi\\) be geographic latitude, \\(\\lambda\\) longitude, and \\(\\lambda_0\\) the central meridian. Angles are measured in radians, with the longitude difference wrapped to the interval \\([-\\pi,\\pi]\\).\n\nAn auxiliary angle \\(\\theta\\), ranging from \\(-\\pi/2\\) to \\(\\pi/2\\), is defined implicitly by\n\n\\[2\\theta+\\sin(2\\theta)=\\pi\\sin\\phi.\\]\n\nThe projected coordinates are\n\n\\[x=\\frac{2\\sqrt{2}R}{\\pi}(\\lambda-\\lambda_0)\\cos\\theta,\\]\n\n\\[y=\\sqrt{2}R\\sin\\theta.\\]\n\nFalse easting and false northing may be added to these coordinates in a software implementation.\n\nThe full-world boundary satisfies\n\n\\[\\frac{x^2}{8R^2}+\\frac{y^2}{2R^2}=1.\\]\n\nIts semimajor axis is therefore \\(2\\sqrt{2}R\\), and its semiminor axis is \\(\\sqrt{2}R\\). The area of the ellipse is \\(4\\pi R^2\\), equal to the surface area of the sphere.\n\nNumerical solution and inverse equations\n\nThe equation defining \\(\\theta\\) generally requires numerical solution. One possible algorithm is Newton’s method:\n\n\\[\\theta_{n+1} = \\theta_n- \\frac{2\\theta_n+\\sin(2\\theta_n)-\\pi\\sin\\phi} {2+2\\cos(2\\theta_n)}.\\]\n\nImplementations require special treatment at or very near the poles because the denominator approaches zero. At the poles, \\(\\theta=\\pm\\pi/2\\) is assigned directly.\n\nFor a point inside the map boundary, the inverse equations are\n\n\\[\\theta=\\arcsin\\left(\\frac{y}{\\sqrt{2}R}\\right),\\]\n\n\\[\\phi=\\arcsin\\left(\\frac{2\\theta+\\sin(2\\theta)}{\\pi}\\right),\\]\n\n\\[\\lambda=\\lambda_0+\\frac{\\pi x}{2\\sqrt{2}R\\cos\\theta}.\\]\n\nLongitude is indeterminate at the two pole points, where all meridians meet."
    },
    {
      "heading": "Area preservation and distortion",
      "text": "Why area is preserved\n\nDifferentiating the auxiliary-angle equation gives\n\n\\[4\\cos^2\\theta\\,d\\theta=\\pi\\cos\\phi\\,d\\phi.\\]\n\nThe absolute value of the coordinate transformation’s Jacobian determinant is consequently\n\n\\[\\left| \\frac{\\partial(x,y)}{\\partial(\\lambda,\\phi)} \\right| =R^2\\cos\\phi.\\]\n\nThis equals the spherical surface-area factor in longitude–latitude coordinates. Thus, a region on the map has the same area as the corresponding region on the sphere, subject to the overall scale used for printing or display.\n\nArea preservation applies to arbitrary regions, not just to the total world outline. For example, the mapped area ratio between Greenland and Africa reflects their actual area ratio rather than exaggerating Greenland’s size.\n\nWhat is not preserved\n\nEqual area does not mean that shapes, distances, or directions are correct. The projection is not conformal: it does not preserve angles generally, and small circles usually become ellipses. Distortion becomes especially conspicuous near the outer meridians, where landmasses can appear strongly sheared or stretched.\n\nIn the normal equatorial orientation, scale along parallels is true at approximately \\(40^\\circ44'\\) north and south. This does not make those entire parallels free of angular or shape distortion. Local scale depends on both position and direction, so there is no single map scale valid throughout the map.\n\nThe projection does not generally turn shortest paths into straight lines or preserve compass bearings. Its main purpose is comparison of areas and distributions, not navigation."
    },
    {
      "heading": "History",
      "text": "Mollweide introduced the projection in 1805. The French scientist Jacques Babinet presented it again in 1857 under the name homalographic, helping to establish alternative names including Babinet and homolographic projection.\n\nIts enduring importance in cartography comes from combining exact area preservation with a compact, recognizable whole-world outline. The ellipse also gives a continuous representation of the globe without requiring interruptions through continents or oceans, apart from the unavoidable cut at the map boundary."
    },
    {
      "heading": "Applications",
      "text": "Global thematic mapping\n\nThe projection is well suited to thematic maps in which the relative extent of regions matters. Uses include maps of vegetation, land cover, climate, and broad environmental distributions.\n\nFor a choropleth map, equal-area geometry prevents projection-induced enlargement from disproportionately emphasizing high-latitude regions. It does not, however, correct problems arising from unsuitable statistical variables, classification choices, or the sizes and boundaries of the geographic units.\n\nAstronomical mapping\n\nMollweide maps also represent the entire celestial sphere, including all-sky measurements and catalogs of celestial objects. Their equal-area property supports comparison of sky regions and spatial distributions. Astronomical maps may use galactic or equatorial coordinates and may reverse the horizontal axis relative to conventional terrestrial maps.\n\nDigital cartography\n\nThe projection is supported by geographic information systems and scientific visualization software. Correct use requires more than selecting its name: the central meridian, sphere or ellipsoid treatment, coordinate units, and other coordinate reference system parameters must also be specified.\n\nThe standard equations are spherical. When coordinates refer to a reference ellipsoid, an ellipsoidal equal-area implementation can use authalic latitude and an equal-area sphere. Simply substituting geodetic latitude into the spherical equations does not provide exact area preservation relative to the ellipsoid."
    },
    {
      "heading": "Variants and related projections",
      "text": "Interrupted Mollweide maps divide the globe into lobes with separate central meridians. They can reduce shape distortion within selected landmasses or ocean basins, but introduce discontinuities that complicate tracing routes and interpreting relationships across the cuts.\n\nThe Goode homolosine projection combines Mollweide sections at higher latitudes with sinusoidal sections at lower latitudes. It is commonly presented in interrupted form, especially for world land-distribution maps.\n\nThe Winkel Tripel projection offers a different compromise: it balances several kinds of distortion rather than preserving area exactly. The Albers equal-area conic projection also preserves area but is generally better suited to broad midlatitude regions than to an uninterrupted world map.\n\nThe choice between these projections depends on geographic extent and purpose. Mollweide’s defining advantage is faithful area comparison across an entire sphere; its principal limitation is the substantial deformation required to fit that sphere into a single ellipse."
    }
  ],
  "links": [
    "equal-area-projection",
    "map-projection",
    "latitude",
    "longitude",
    "meridian",
    "mercator-projection",
    "algorithm",
    "greenland",
    "africa",
    "map-scale",
    "cartography",
    "thematic-map",
    "climate",
    "choropleth-map",
    "geographic-information-system",
    "coordinate-reference-system",
    "winkel-tripel-projection",
    "albers-equal-area-conic-projection"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}