{
  "id": "mirror",
  "title": "Mirror",
  "lang": "en",
  "source_lang": "en",
  "summary": "A mirror is an optical surface that reflects light to form images, redirect radiation, or control optical wavefronts.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Looking glass",
    "looking-glass"
  ],
  "generated_at": "2026-11-02",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/mirror/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/mirror/",
      "json": "https://aiwiki.page/zh/mirror.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A mirror is an object whose surface reflects light in an orderly way, allowing it to form images or redirect a beam. Most familiar mirrors consist of glass with a reflective metallic coating, but polished metals, multilayer dielectric coatings, liquid surfaces, and other structures can serve the same purpose. Mirrors may be flat or curved, and their operation extends beyond visible light into the ultraviolet, infrared, and other regions of the electromagnetic spectrum.\n\nMirrors are fundamental components of optics. They provide everyday images for grooming and driving, collect faint radiation in astronomical instruments, form resonators in lasers, and enable precision measurements of distance and motion. Their optical behavior depends on surface shape, microscopic smoothness, and the interaction of radiation with the reflecting material. Their history also connects material technology with trade, interior design, art, and ideas about vision and identity."
    },
    {
      "heading": "Reflection and the physical basis of mirrors",
      "text": "The defining property of an optical mirror is predominantly specular reflection: light arriving from a particular direction leaves in a well-defined direction. For an ideal smooth surface, the incident ray, reflected ray, and surface normal lie in one plane, and the angles measured from the normal satisfy\n\n\\[\\theta_{\\mathrm i}=\\theta_{\\mathrm r}.\\]\n\nA rough white wall also reflects much of the light that reaches it, but it distributes that light among many directions. It therefore illuminates its surroundings without ordinarily producing a recognizable image. Whether a surface behaves as smooth depends partly on wavelength: irregularities insignificant to radio waves can strongly scatter visible light.\n\nReflection follows from the response of matter to an incident electromagnetic field. In a metal, mobile electrons respond collectively to the field and generate a reflected wave. Some incident energy is absorbed and converted into heat, so a real metallic mirror does not reflect perfectly. Its performance is characterized by wavelength-dependent reflectance, together with absorption and any transmission through the coating. For an ordinary passive surface, the fractions of incident power obey\n\n\\[R+T+A=1,\\]\n\nwhere \\(R\\) is reflectance, \\(T\\) transmittance, and \\(A\\) absorptance. These quantities refer to specified wavelengths, incidence angles, and polarization states rather than being universal constants of a mirror.\n\nAn uncoated transparent surface also reflects. At normal incidence between two nonabsorbing media, the power reflectance is\n\n\\[R=\\left(\\frac{n_1-n_2}{n_1+n_2}\\right)^2,\\]\n\nwhere \\(n_1\\) and \\(n_2\\) are their refractive indices. An air–glass boundary with glass index approximately 1.5 reflects about 4 percent of the incident light. This weak reflection explains window images, especially when one side is brightly illuminated and the other is dark. Metallic and engineered multilayer coatings provide much stronger or more selective reflection.\n\nThe reflected wave also undergoes a phase change, whose magnitude depends on material, wavelength, angle, and polarization. Phase matters whenever reflected waves interfere, as in precision optical cavities or multilayer coatings. At oblique incidence, electric fields oriented parallel and perpendicular to the plane of incidence generally experience different reflection coefficients. Consequently, a mirror can alter polarization as well as direction and intensity.\n\nA boundary can reflect nearly all incident light without a metallic coating through total internal reflection. This occurs when light travels in a higher-index medium toward a lower-index medium at an angle exceeding the critical angle. Prisms using this effect replace mirrors in some instruments, although their optical path, dispersion, and polarization effects differ from those of an exposed reflecting surface."
    },
    {
      "heading": "Image formation, curvature, and apparent reversal",
      "text": "A plane mirror produces a virtual image: reflected rays diverge as though they originated behind the surface, although they do not actually pass through that apparent image location. For an ideal plane mirror, each image point lies as far behind the mirror as its corresponding object point lies in front. The image has the same linear dimensions as the object. Its apparent distance from an observer includes both the observer-to-mirror distance and the mirror-to-image distance, explaining why focusing on a reflection is not equivalent to focusing on the glass surface itself.\n\nThe familiar statement that a mirror “reverses left and right” is incomplete. A plane mirror reverses the coordinate perpendicular to its surface while preserving coordinates parallel to it. If the mirror occupies the plane \\(z=0\\), its geometrical mapping is\n\n\\[(x,y,z)\\longmapsto(x,y,-z).\\]\n\nThe impression of left–right reversal arises when the reflected figure is compared with a person imagined to have turned around to face the observer. Such a bodily rotation changes the comparison of sides. A mirror does not intrinsically select the horizontal rather than the vertical direction. Its transformation does, however, reverse handedness, connecting mirror images with chirality in geometry and chemistry.\n\nCurved mirrors change the convergence of reflected light. A concave mirror can collect an approximately parallel beam and bring it toward a focus; a convex mirror makes reflected rays diverge and offers a wider field of view. For a spherical mirror used close to its axis, the focal length is approximately half the radius of curvature:\n\n\\[f=\\frac{r}{2}.\\]\n\nThe paraxial mirror equation is\n\n\\[\\frac{1}{f}=\\frac{1}{d_{\\mathrm o}}+\\frac{1}{d_{\\mathrm i}}, \\qquad m=-\\frac{d_{\\mathrm i}}{d_{\\mathrm o}},\\]\n\nwhere \\(d_{\\mathrm o}\\) and \\(d_{\\mathrm i}\\) are object and image distances and \\(m\\) is transverse magnification. In a common convention, real objects and real images have positive distances, while virtual images have negative image distances.\n\nA concave mirror produces an upright, enlarged virtual image when the object is inside its focal distance, as in a magnifying grooming mirror. Outside that distance, it can produce an inverted real image that can be projected onto a screen. A convex mirror normally produces an upright, diminished virtual image of a real object. Its expanded field of view makes it useful in vehicle mirrors and at concealed corners, although the reduced image scale changes visual judgments of distance.\n\nThese simple relations are approximations. Spherical mirrors exhibit optical aberrations, including spherical aberration when rays far from the axis focus differently from paraxial rays. A paraboloidal mirror brings rays parallel to its axis to a common geometrical focus, but off-axis objects can suffer coma. Even a perfectly figured mirror has finite resolving power because of diffraction, which depends on wavelength and aperture size."
    },
    {
      "heading": "Historical development",
      "text": "Reflecting surfaces long predate manufactured mirrors: still water, polished stone, and naturally smooth minerals can show images. Among the earliest surviving manufactured mirrors are polished obsidian examples from Neolithic Anatolia, dating to approximately the seventh and sixth millennia BCE. Their production required grinding and polishing a hard volcanic glass to obtain a sufficiently regular surface. Such objects demonstrate that useful reflection could be achieved without metalworking or a separate reflective coating.\n\nMetal mirrors became important in several ancient societies. Copper and bronze mirrors were used in Egypt and the Near East, while bronze mirrors developed extensive traditions in China. Greek and Roman examples included polished metal disks, sometimes with decorated handles or protective cases. Because a metal mirror reflects from its exposed front surface, its quality depends on polishing and resistance to tarnishing. The reflecting face could be relatively plain while the reverse carried elaborate ornament, inscriptions, or religious imagery.\n\nGlass-backed mirrors existed in antiquity, but producing large, clear, flat glass and applying a stable reflecting layer remained difficult. During the late medieval and early modern periods, European glassmaking centers improved the quality and size of mirror glass. Venice, particularly Murano, became associated with highly valued mirrors, and production later expanded in France and elsewhere. Tin–mercury amalgam backing became an important process: a tin layer combined with mercury created a reflective backing against the glass. This manufacture exposed workers to mercury and differed substantially from later chemical silvering.\n\nIn 1835, the German chemist Justus von Liebig described a method for depositing metallic silver on glass by chemical reduction. Subsequent technical improvements helped establish silvered glass as a major commercial product during the nineteenth century. Silver coatings offered high visible reflectance and could be protected behind the glass and additional backing layers. Larger, more affordable mirrors became increasingly common in domestic interiors, shops, and public buildings as glass manufacture and industrial coating methods developed.\n\nScientific mirrors followed a related but distinct path. Early reflecting telescopes often used speculum metal, a hard copper–tin alloy that required demanding polishing and periodic resurfacing. Isaac Newton constructed a working reflecting telescope in 1668. In the nineteenth century, silver-on-glass astronomical mirrors combined a glass substrate with a renewable reflective layer. Vacuum-deposited aluminum became important in the twentieth century, particularly for astronomical instruments requiring useful ultraviolet performance. Later advances included low-expansion glass substrates, lightweight structures, segmented primary mirrors, and actively controlled surfaces, allowing reflecting apertures far larger than could conveniently be made as single thick disks."
    },
    {
      "heading": "Materials, coatings, and manufacture",
      "text": "A conventional household mirror is usually a second-surface mirror. Light passes through a glass sheet, reflects from a coating on its rear, and passes through the glass again. The glass protects the reflective layer from direct abrasion, while backing paints or other layers help protect it from moisture and chemical attack. The arrangement is economical and durable, but the front glass surface also produces a weak reflection. At some viewing angles this appears as a displaced secondary or “ghost” image. Absorption in the glass can also affect color, particularly over long paths or near edges.\n\nA first-surface mirror places the reflective coating on the side first encountered by the light. It avoids the extra passage through a glass sheet and the associated ghost image, making it preferable in many imaging instruments. Its exposed optical surface is more vulnerable, however, and cleaning or protective coatings must be chosen carefully. Some systems use a transparent protective overcoat; others prioritize maximum optical performance and require a controlled operating environment.\n\nSilver, aluminum, and gold serve different spectral requirements. Silver has very high reflectance across much of the visible and near-infrared spectrum, but sulfur-containing compounds can tarnish it. Aluminum provides broad usefulness extending into the ultraviolet, although its oxide and any protective coating influence performance. Gold performs well in much of the infrared but reflects blue light less effectively, producing its characteristic warm color. No one metal provides the highest reflectance at all wavelengths and angles. Coating selection therefore depends on the intended spectral band, environmental exposure, and allowable absorption.\n\nThe substrate establishes the mirror’s shape and mechanical stability. Materials include ordinary glass, fused silica, low-expansion glass-ceramics, metals, and silicon carbide. A material’s expansion with temperature, stiffness, thermal conductivity, and ability to accept a polish can be as important as its density. Lightweight mirrors may use thin facesheets supported by ribs or cellular structures. For demanding instruments, the coating’s internal stress must also be controlled because it can distort a thin substrate.\n\nManufacture typically proceeds through shaping, grinding, fine polishing, measurement, and coating. Traditional polishing uses abrasives carried by tools such as pitch laps; modern methods include computer-controlled polishing and ion-beam figuring. Reflective films may be deposited by vacuum evaporation or sputtering, while commercial silvering can use chemical deposition. Surface preparation is critical: particles, residual contamination, or poor adhesion can undermine an otherwise suitable coating. In service, deterioration often begins at edges or defects where moisture and reactive chemicals reach the metal. Glass strength, backing design, mounting, and protective films also determine how a finished mirror behaves when damaged or broken."
    },
    {
      "heading": "Selective, switchable, and unusual mirrors",
      "text": "A dielectric mirror uses multiple thin layers of transparent materials with different refractive indices rather than relying primarily on a metallic film. Reflections from the interfaces combine through interference. In a simple quarter-wave stack, each layer has an optical thickness near one quarter of the design wavelength, causing reflected contributions to reinforce over a selected spectral band. Properly designed stacks can exceed 99.9 percent reflectance in their intended operating range, although performance changes with wavelength, angle, polarization, coating losses, and manufacturing accuracy.\n\nSpectral selectivity is useful when different wavelengths must follow different paths. A dichroic mirror reflects one band while transmitting another; such components separate excitation light from fluorescence in microscopes and combine colors in projection systems. “Cold mirrors” are designed to reflect visible light while transmitting much of the infrared, reducing heat in the reflected illumination beam. “Hot mirrors” perform the complementary separation over specified bands. These names describe spectral functions, not the actual temperature of the component, and their useful bands depend on the coating design.\n\nA partially transmitting mirror divides incident light between reflected and transmitted beams. In a beam splitter, the division may be approximately equal or deliberately unequal, with phase and polarization behavior controlled for the instrument. The familiar “one-way mirror” is a partially reflecting surface used between spaces with substantially different illumination. An observer on the dark side can see light arriving from the bright side, while someone on the bright side mainly sees the bright reflected surroundings. The coating does not fundamentally transmit light in only one direction; the apparent asymmetry comes from illumination and contrast.\n\nSwitchable mirrors change reflectance under an external control. Electrochromic vehicle mirrors use electrically induced changes in an optical layer to reduce the brightness of reflected headlights. The device generally combines an absorbing, voltage-responsive medium with a reflector rather than mechanically changing the mirror’s curvature. Other variable-reflectance systems use liquid crystals, switchable materials, or movable structures. A digital micromirror device contains an array of tiny tilting mirrors, each directing light into or away from an imaging path; this principle underlies a major class of digital projectors.\n\nSome mirrors exploit geometries or materials unlike a solid polished plate. A rotating liquid can form a paraboloidal free surface and serve as the primary reflector of a zenith-pointing telescope. Corner-cube arrangements and related retroreflectors return light approximately toward its source over a range of incident directions. For X-rays, ordinary near-normal metallic reflection is generally inefficient, so many astronomical systems use nested surfaces at shallow grazing angles. At selected wavelengths, multilayer structures can also provide useful near-normal reflection of extreme-ultraviolet or X-ray radiation."
    },
    {
      "heading": "Precision, testing, and environmental limits",
      "text": "Mirror quality involves several distinct properties. Surface figure describes departure from the intended overall shape; roughness describes smaller-scale irregularity; and intermediate-scale structure can introduce additional image degradation. A mirror may have excellent microscopic smoothness yet focus badly because its large-scale curvature is wrong. Conversely, an accurately shaped but rough surface can scatter light into a halo. Coating uniformity, scratches, pits, contamination, and substrate defects must be evaluated separately because they affect different aspects of performance.\n\nFor reflection near normal incidence, a small surface-height error \\(h\\) produces approximately twice that error in optical path:\n\n\\[\\Delta \\approx 2h.\\]\n\nAt incidence angle \\(\\theta\\), the corresponding local expression is approximately \\(2h\\cos\\theta\\), subject to the geometry and error definition. This doubling makes precise reflecting surfaces demanding to manufacture. Optical specifications therefore need to distinguish surface error from reflected wavefront error. They must also state whether a quoted value is peak-to-valley or root-mean-square, which spatial features are included, and over what aperture the measurement applies.\n\nInterferometry is central to precision testing. A test wavefront reflected from the mirror is compared with a reference, and the resulting fringes reveal differences in optical path. Fizeau and other interferometer configurations can provide detailed surface maps. Large aspheric mirrors may require auxiliary optics or computer-generated holograms to establish an appropriate reference wavefront. Historically important tests include the Foucault knife-edge test, which reveals departures from the intended focusing behavior through characteristic light-and-shadow patterns.\n\nErrors can also arise from the test arrangement itself. The Hubble Space Telescope, launched in 1990, initially suffered from spherical aberration associated with an incorrectly configured ground-test instrument used during manufacture of its primary mirror. Corrective optics installed during the 1993 servicing mission compensated for the error. The episode illustrates why independent tests, cross-checks, and explicit measurement uncertainty are important: a precise measurement system can still establish an incorrect shape if its reference is wrong.\n\nA mirror’s operating environment can alter a surface that was accurate during manufacture. Gravity deforms large structures differently as their orientation changes. Thermal expansion, temperature gradients, and coating stress can change curvature or introduce local distortion. Mounts must constrain the optic without imposing excessive mechanical forces. Dust and films of contamination increase scattering and can reduce throughput or damage thresholds, especially under intense illumination.\n\nActive and adaptive optics address different classes of disturbance. Active optics generally uses comparatively slow adjustments to maintain the shape and alignment of large telescope mirrors against gravity and thermal effects. Adaptive optics uses rapid wavefront measurements and deformable mirrors to compensate for changing distortions, notably those introduced by atmospheric turbulence. Neither substitutes for every aspect of optical quality: actuator spacing, response speed, sensor sensitivity, and the available reference signal limit the correction."
    },
    {
      "heading": "Scientific and technological applications",
      "text": "In astronomy, mirrors collect radiation over large areas and direct it into detectors or instruments. A telescope with a larger effective aperture generally collects more light and can achieve finer diffraction-limited angular resolution at a given wavelength. Reflectors avoid the bulk absorption and longitudinal chromatic aberration associated with large refracting objectives. Their limitations instead include obstruction in some designs, alignment sensitivity, coating losses, and the engineering required to support large optical surfaces.\n\nModern observatories demonstrate several solutions to these challenges. The Hubble Space Telescope uses a 2.4-metre primary mirror. Each of the twin Keck telescopes uses a primary assembled from 36 hexagonal segments, forming an aperture approximately 10 metres across. The James Webb Space Telescope has 18 primary segments forming an aperture approximately 6.5 metres across; its gold-coated surfaces are optimized for infrared observations. Segmentation permits large collecting areas without requiring a single monolithic substrate, but introduces demanding requirements for alignment and wavefront control.\n\nIn a laser, mirrors commonly form an optical resonator that returns light repeatedly through an amplifying medium. One mirror may transmit a controlled fraction as the output beam. Mirror curvature and separation influence the resonator’s stable modes, while coating bandwidth and loss affect the operating wavelengths and efficiency. At high power, even small absorption can heat and distort the optic. In ultrashort-pulse systems, the wavelength dependence of reflection phase must also be controlled because it can lengthen or reshape pulses.\n\nMirrors also make extremely sensitive measurements possible. Interferometric displacement instruments infer motion from changes in phase rather than from a directly resolved image. Laser interferometers used to detect gravitational waves employ highly reflective mirrors as both optical components and carefully isolated test masses. Repeated circulation of light in optical cavities increases sensitivity, while thermal motion, optical losses, vibration, and radiation-pressure effects constrain performance. Related techniques support industrial dimensional measurement, precision positioning, and the stabilization of optical frequencies.\n\nInstruments often use mirrors simply to fold a long optical path into a compact volume. Reflective arrangements occur in microscopes, spectrometers, scanners, cameras, and medical viewing instruments. Because the direction of reflection changes by twice the small angular rotation of a plane mirror, moving mirrors are effective beam-steering devices. Galvanometer-mounted mirrors scan laser beams across surfaces, while rotating or oscillating reflectors support ranging and imaging systems.\n\nMirrors can also concentrate energy. Parabolic dishes and troughs direct sunlight toward receivers, while heliostats track the Sun and reflect radiation toward a central tower. The achievable concentration depends on geometry, tracking accuracy, surface quality, and the Sun’s finite angular size. Large solar installations must coordinate optical performance with structural loads, weather exposure, cleaning, and receiver thermal limits. In these systems, the useful quantity is not image fidelity but the delivery of radiation into a specified area."
    },
    {
      "heading": "Everyday use, perception, art, and cultural meaning",
      "text": "The everyday mirror is both an optical device and an aid to self-observation. Flat mirrors are used for grooming, clothing, and inspection; concave mirrors provide enlarged views at close range; convex mirrors enlarge the visible field in traffic, shops, and buildings. A plane mirror need not be as tall as the person it shows: in ideal geometry, a correctly positioned vertical mirror of half the observer’s height can show the whole body. Its required size follows from the midpoints of the ray paths between the eye and the top and bottom of the body, rather than from the observer’s distance from the mirror.\n\nVehicle mirrors illustrate the relationship between optical geometry and perception. Convex surfaces display more of the surrounding scene but make objects appear smaller than they would in a plane mirror. Aspheric designs vary curvature across the surface to combine different fields of view. Interior day–night mirrors may use a wedge-shaped glass element and a mechanical tilt to switch between the strong backing reflection and a much weaker front-surface reflection. Electrochromic designs instead control reflected brightness electrically. These mechanisms alter glare or field coverage without changing the basic law of reflection.\n\nMirror viewing depends on perceptual interpretation as well as ray geometry. The visual system uses image size, motion, binocular information, and scene context to infer positions and shapes behind the reflecting plane. Experiments in developmental psychology and animal behavior have used the mirror test, commonly involving an otherwise unseen mark, to investigate whether a subject treats the reflection as its own body. The test probes a particular form of visually mediated self-recognition; differences in sensory abilities, motivation, and behavior complicate comparisons across species. Passing or failing it does not by itself establish a complete account of self-awareness.\n\nIn architecture, mirrors redistribute light and create apparent extensions of rooms, gardens, and vistas. The Hall of Mirrors at Versailles, constructed in the late seventeenth century, is a prominent example of reflective surfaces integrated with windows, decoration, and ceremonial space. Mirrored interiors can repeat images through successive reflections, while angled arrangements create patterned repetitions. A kaleidoscope uses multiple reflections to turn a limited collection of objects into changing symmetrical designs; a pair of nearly parallel mirrors produces a receding sequence of increasingly faint images.\n\nMirrors have also served as important devices in painting, performance, and literature. In Jan van Eyck’s Arnolfini Portrait of 1434, a small convex mirror depicts a wider view of the room than the principal scene alone provides. Diego Velázquez’s Las Meninas of 1656 uses a mirror within a complex arrangement of represented viewers and subjects. Literary mirrors may signal truthful revelation, deception, vanity, duplication, or passage into another world, as in Lewis Carroll’s Through the Looking-Glass of 1871.\n\nSpecific traditions give mirrors meanings beyond their practical use. Mirrors have held ritual importance in Japan, including within Shinto traditions, and decorated bronze mirrors in China combined reflective function with inscriptions and symbolic designs. European folklore includes beliefs about broken mirrors and divination. These meanings vary by period and community: the same physical property—a visible likeness that appears present but cannot be touched at its apparent location—has supported markedly different artistic, religious, and philosophical interpretations."
    }
  ],
  "links": [
    "light",
    "electromagnetic-spectrum",
    "optics",
    "reflection-optics",
    "electron",
    "heat",
    "refractive-index",
    "polarization",
    "total-internal-reflection",
    "chirality",
    "diffraction",
    "water",
    "china",
    "isaac-newton",
    "temperature",
    "interference",
    "interferometry",
    "measurement-uncertainty",
    "scattering",
    "adaptive-optics",
    "astronomy",
    "telescope",
    "laser",
    "gravitational-wave",
    "microscope",
    "spectroscopy",
    "sun",
    "architecture",
    "painting",
    "literature"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}