{
  "id": "michelson-interferometer",
  "title": "Michelson Interferometer",
  "lang": "en",
  "source_lang": "en",
  "summary": "A Michelson interferometer splits and recombines light along two reflected paths to measure optical path differences, enabling precision displacement measurements, spectroscopy, and gravitational-wave detection.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Michelson-type interferometer"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/michelson-interferometer/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/michelson-interferometer/",
      "json": "https://aiwiki.page/zh/michelson-interferometer.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A Michelson interferometer is an optical instrument that divides a beam of light into two beams, sends them along separate paths, and recombines them to produce interference. Each beam travels to a reflector and returns, so a change in either arm alters the relative phase of the returning waves. The resulting intensity changes reveal differences in optical path length with very high sensitivity. Developed by Albert A. Michelson in the early 1880s, the instrument is a foundational design in interferometry, with applications ranging from laboratory length measurements to astronomical instruments and gravitational-wave observatories."
    },
    {
      "heading": "Optical arrangement",
      "text": "The basic instrument contains a light source, a beam splitter, two mirrors, and an observation system or detector. The beam splitter, commonly a partially reflecting plate or a coated cube, transmits part of the incident light and reflects the remainder into a second arm. In the conventional arrangement, the two arms are perpendicular.\n\nEach mirror reflects its beam back toward the beam splitter. Portions of the returning beams then overlap at an output port. Their electric fields combine according to the superposition principle, producing an intensity that depends on their relative phase. Another portion of the light exits through the other port, often toward the source. In an ideal lossless instrument, changes in interference redistribute light between the two outputs rather than create or destroy optical energy.\n\nOne mirror is often movable along its arm, allowing a controlled change in path length. Mirror tilts adjust the alignment and appearance of the interference fringes.\n\nIn a plate-beam-splitter arrangement, the two interfering paths may pass through unequal thicknesses of glass. A compensating plate made from matching glass can equalize these thicknesses. This is especially important with broadband light because optical dispersion makes the phase delay through glass wavelength-dependent."
    },
    {
      "heading": "Operating principle",
      "text": "Optical path difference and phase\n\nThe relevant quantity is optical path length, not simply geometric distance. For a path through a medium whose refractive index is \\(n\\), the optical path length is\n\n\\[\\mathcal{L}=\\int n\\,ds.\\]\n\nThe optical path difference between the two returning beams is\n\n\\[\\Delta=\\mathcal{L}_1-\\mathcal{L}_2.\\]\n\nFor monochromatic light of vacuum wavelength \\(\\lambda_0\\), the relative phase can be written as\n\n\\[\\phi=\\frac{2\\pi\\Delta}{\\lambda_0}+\\phi_{\\mathrm{c}},\\]\n\nwhere \\(\\phi_{\\mathrm{c}}\\) includes additional phase shifts associated with the beam splitter and other optical components.\n\nFor perfectly coherent beams with matching polarization, the intensity at a chosen output is\n\n\\[I=I_1+I_2+2\\sqrt{I_1I_2}\\cos\\phi,\\]\n\nwhere \\(I_1\\) and \\(I_2\\) are the intensities contributed by the individual beams at that output. Imperfect coherence, polarization mismatch, or incomplete spatial overlap reduces the interference term.\n\nThe double-pass factor\n\nIf a mirror moves a distance \\(d\\) along its arm in a uniform medium, the round-trip optical path changes by approximately\n\n\\[\\delta\\Delta=2nd,\\]\n\nassuming the refractive index remains constant. Thus, the number of complete fringe cycles passing a fixed observation point is\n\n\\[N=\\frac{2nd}{\\lambda_0}.\\]\n\nIn vacuum, one complete fringe cycle corresponds to a mirror displacement of \\(\\lambda_0/2\\). This double-pass sensitivity makes the Michelson arrangement particularly useful in metrology.\n\nCounting fringes measures accumulated motion. Determining a displacement smaller than one fringe requires phase interpolation or another suitable readout method. A single intensity value generally does not uniquely determine position, because the signal repeats and the cosine function does not by itself distinguish the direction of motion."
    },
    {
      "heading": "Fringe patterns and coherence",
      "text": "The observed fringe pattern depends on mirror alignment, illumination, path difference, and the plane in which the interference is viewed.\n\nWith extended illumination and appropriately aligned effective reflecting planes, the instrument can produce fringes of equal inclination, commonly observed as concentric rings. Different rings correspond to different propagation angles. When the effective reflecting planes are slightly tilted relative to each other, fringes can instead appear approximately straight or curved across the overlap region. Collimated laser illumination commonly produces nearly straight fringes when a small angular mismatch is introduced.\n\nFringe visibility is defined as\n\n\\[V=\\frac{I_{\\max}-I_{\\min}}{I_{\\max}+I_{\\min}}.\\]\n\nHigh visibility requires suitable intensity balance, overlapping wavefronts, compatible polarization, and adequate optical coherence. A large intensity imbalance reduces contrast even when the beams are otherwise perfectly coherent.\n\nThe source bandwidth determines how far the optical paths can differ while maintaining visible interference. Narrowband sources can support interference over comparatively large path differences. Broadband sources produce strong interference only near matched optical paths. White-light interference therefore provides a useful indication of the region of nearly zero path difference, although unequal dispersion between the arms can distort the signal."
    },
    {
      "heading": "Historical development",
      "text": "Michelson developed an early version of the instrument for an ether-drift experiment reported in 1881. In 1887, Michelson and Edward W. Morley used an improved instrument in the Michelson–Morley experiment.\n\nThe experiment tested whether the motion of Earth through a hypothesized stationary luminiferous ether would produce a detectable difference in the round-trip travel times of light along perpendicular directions. Rotating the apparatus was expected, under the ether model being tested, to shift the interference fringes. The observed result did not show the predicted shift at the expected magnitude.\n\nThis outcome became a major constraint on theories of light propagation and an important part of the experimental background to special relativity. It did not measure the one-way speed of light, nor did it independently establish every aspect of relativity; its direct significance concerned the predicted orientation-dependent difference in round-trip light propagation.\n\nMichelson also developed interferometric methods for comparing length standards with optical wavelengths. Such work helped establish the role of optical interference in precision length measurement, preceding the modern definition of the metre through the fixed value of the speed of light."
    },
    {
      "heading": "Applications",
      "text": "Displacement and dimensional measurement\n\nA Michelson interferometer converts changes in position into measurable optical phase changes. Practical instruments can measure translation, vibration, thermal expansion, and the motion of precision positioning systems.\n\nA frequency-stabilized laser provides a well-characterized wavelength. For measurements in air, however, the wavelength depends on refractive index, which varies with temperature, pressure, humidity, and gas composition. Accurate measurements must also account for alignment errors and changes in the instrument itself.\n\nFringe counting can track motion over many wavelengths, while phase-sensitive electronics resolve fractions of a fringe. Calibration and a complete assessment of measurement uncertainty remain necessary: a small detectable phase change is not, by itself, a guarantee of equally small absolute length error.\n\nRefractive-index measurements\n\nA transparent sample or gas cell placed in one arm changes that arm’s optical path. If a sample of thickness \\(L\\) replaces a reference medium and is traversed twice, the approximate path change is\n\n\\[\\delta\\Delta=2L(n_{\\mathrm{sample}}-n_{\\mathrm{reference}}),\\]\n\nneglecting additional effects from windows, deformation, and multiple reflections. The resulting fringe shift can be used to determine refractive-index differences or their variation with environmental conditions.\n\nFourier-transform spectroscopy\n\nA scanning Michelson interferometer is a central component of Fourier-transform spectroscopy, especially infrared spectroscopy. Moving one mirror records detector intensity as a function of optical path difference, producing an interferogram.\n\nFor an ideal instrument, the modulated signal has the form\n\n\\[I_{\\mathrm{mod}}(\\Delta) =\\int_0^\\infty S(\\sigma) \\cos(2\\pi\\sigma\\Delta)\\,d\\sigma,\\]\n\nwhere \\(\\sigma=1/\\lambda_0\\) is the spectroscopic wavenumber and \\(S(\\sigma)\\) represents the spectral power distribution with suitable instrumental weighting. A Fourier transform recovers spectral information from the interferogram.\n\nThe maximum scanned optical path difference controls spectral resolution, while the sampling interval constrains the accessible spectral range. Real instruments also require corrections for phase errors, finite scan length, detector response, and optical throughput.\n\nSurface and depth measurements\n\nBy comparing light reflected from a test surface with a reference beam, Michelson-type systems can measure surface shape and small height variations.\n\nLow-coherence variants help localize reflections in depth because appreciable interference occurs only when the reference and sample path lengths match within the source’s coherence range. Related arrangements are used in optical coherence tomography, although practical systems may use fiber-optic layouts rather than a conventional free-space Michelson geometry.\n\nGravitational-wave detection\n\nLarge laser interferometers such as LIGO use a modified Michelson arrangement to detect the differential response of two long arms to a passing gravitational wave. The optical phase records extremely small changes in the relative light-travel times along the arms.\n\nThese observatories are substantially more elaborate than a basic Michelson interferometer. Resonant arm cavities increase the interaction time of light with the detector, additional recycling optics improve optical sensitivity, and suspended mirrors and active control systems suppress environmental disturbances. Their interpretation also requires general relativity, rather than a purely mechanical picture of mirrors moving in otherwise unaffected space."
    },
    {
      "heading": "Limitations and practical refinements",
      "text": "Because the two beams follow separate paths, a Michelson interferometer is sensitive to vibration, air turbulence, thermal expansion, acoustic disturbance, and refractive-index fluctuations. Equal arm lengths can reduce sensitivity to some laser-frequency fluctuations, but they do not eliminate differential disturbances.\n\nOther important limitations include:\n\n- Alignment errors: mirror tilt, imperfect beam overlap, and angular motion can reduce contrast or introduce measurement errors.\n- Polarization and parasitic reflections: unwanted optical paths can produce additional fringes and systematic phase shifts.\n- Phase ambiguity: intensity repeats every \\(2\\pi\\), so absolute position generally requires additional information.\n- Readout noise: detector noise, photon counting statistics, and laser intensity or frequency fluctuations limit sensitivity.\n- Mechanical back-action: at sufficiently high sensitivity, fluctuations in radiation pressure can affect mirror motion.\n\nHeterodyne detection, quadrature readout, environmental compensation, vacuum operation, and active stabilization address different parts of these limitations. Their effectiveness depends on the quantity being measured and on the instrument’s noise and uncertainty budget."
    }
  ],
  "links": [
    "light",
    "interference",
    "interferometry",
    "superposition-principle",
    "dispersion-optics",
    "refractive-index",
    "polarization",
    "metrology",
    "optical-coherence",
    "special-relativity",
    "metre",
    "speed-of-light",
    "laser",
    "temperature",
    "pressure",
    "calibration",
    "measurement-uncertainty",
    "infrared-spectroscopy",
    "optical-coherence-tomography",
    "gravitational-wave",
    "general-relativity"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}