{
  "id": "meridian",
  "title": "Meridian",
  "lang": "en",
  "source_lang": "en",
  "summary": "A meridian is a pole-to-pole line of constant longitude, fundamental to geographic coordinates, surveying, navigation, mapping, and timekeeping.",
  "category": "geography",
  "subcategory": "",
  "type": "concept",
  "aliases": [
    "Geographic meridian",
    "geographical meridian",
    "line of longitude"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/meridian/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/meridian/",
      "json": "https://aiwiki.page/zh/meridian.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A meridian is a line on the surface of Earth joining the geographic North and South Poles and passing through all locations with a particular longitude. Meridians form the north–south component of the geographic coordinate grid, intersecting parallels of latitude at right angles on a sphere or a rotational reference ellipsoid. Together, latitude and longitude provide a framework for locating places, describing boundaries, navigating, and organizing spatial information.\n\nThe term also has closely related meanings in astronomy and surveying. An observer’s astronomical meridian is a great circle of the celestial sphere passing through the celestial poles and the observer’s zenith and nadir. A terrestrial meridian may be defined geometrically using an adopted model of Earth or astronomically using the direction of local gravity. These definitions are closely connected but are not identical on the irregular, rotating Earth.\n\nMeridians became central to measurements of Earth’s size, the development of the metric system, and the establishment of international longitude and time standards. Their practical use now depends on reference ellipsoids, satellite positioning, and precisely maintained terrestrial reference frames, rather than solely on observations made at individual observatories."
    },
    {
      "heading": "Geometry and geographic meaning",
      "text": "On a spherical Earth, a geographic meridian is usually understood as a semicircle extending from one pole to the other. The meridian at longitude \\(\\lambda\\) and the opposite meridian at \\(\\lambda+180^\\circ\\) together form a complete great circle. In some mathematical and historical contexts, “meridian” instead denotes this entire circle. Distinguishing the semicircle from the full meridian circle prevents ambiguity when discussing circumference, distance, or opposite longitudes.\n\nEvery meridian intersects the equator at a right angle. All meridians meet at both poles, where longitude becomes indeterminate: different longitude values identify the same physical point. Unlike parallels, which become progressively shorter toward the poles, all complete meridian circles have the same length on a sphere or a rotational ellipsoid. Their equal length follows from rotational symmetry, not from an assumption that Earth is perfectly spherical.\n\nLongitude measures the angle between the plane of a selected reference meridian and the plane of another meridian. It is commonly expressed from \\(0^\\circ\\) to \\(180^\\circ\\) east or west, or in a continuous range from \\(0^\\circ\\) to \\(360^\\circ\\). The prime meridian supplies the conventional zero; no physical feature of Earth requires the zero to lie at any particular longitude. Its antimeridian is the opposite pole-to-pole semicircle, conventionally associated with \\(180^\\circ\\).\n\nFor a sphere of radius \\(R\\), an infinitesimal surface distance satisfies\n\n\\[ds^2=R^2\\,d\\phi^2+R^2\\cos^2\\phi\\,d\\lambda^2,\\]\n\nwhere \\(\\phi\\) is latitude and angular increments are in radians. Along a meridian, \\(d\\lambda=0\\), so distance is proportional to latitude change. Along a parallel, east–west distance for a given longitude difference decreases with \\(\\cos\\phi\\). Consequently, meridians separated by one degree are about 111 kilometres apart at the equator, roughly half that distance at latitude \\(60^\\circ\\), and coincident at the poles. These are spherical approximations.\n\nA meridian is also a geodesic on a sphere or rotational ellipsoid: locally, it follows the straightest possible surface path. This does not mean that every arbitrarily long meridian arc is the shortest route between its endpoints. On a sphere, the shorter great-circle arc is the shortest route except for antipodal endpoints, where multiple equally short routes exist. A parallel other than the equator is not a geodesic, which is why a route that maintains constant latitude generally differs from a shortest surface route."
    },
    {
      "heading": "Meridians on an ellipsoidal Earth",
      "text": "Precise geodesy replaces the sphere with a reference ellipsoid, flattened at the poles. A meridian plane cuts this surface in an ellipse whose semimajor axis \\(a\\) lies in the equatorial plane and whose semiminor axis \\(b\\) follows the rotation axis. The flattening is\n\n\\[f=\\frac{a-b}{a},\\]\n\nand the squared first eccentricity is \\(e^2=2f-f^2\\). For the WGS 84 ellipsoid, \\(a=6{,}378{,}137\\) metres and \\(1/f=298.257223563\\). These are defining parameters of a mathematical model, not measurements of an everywhere smooth physical surface.\n\nAn important distinction is between geodetic latitude, measured using the normal to the ellipsoid, and geocentric latitude, measured using a line from Earth’s centre. Except at the equator and poles, these directions differ. Geodetic latitude is normally used in geographic coordinates and positioning systems. Confusing the two changes the relationship between latitude and meridian distance, even when the same ellipsoid is used.\n\nThe meridional radius of curvature at geodetic latitude \\(\\phi\\) is\n\n\\[M(\\phi)=\\frac{a(1-e^2)} {\\left(1-e^2\\sin^2\\phi\\right)^{3/2}}.\\]\n\nThe meridian distance between two latitudes is therefore\n\n\\[s=\\int_{\\phi_1}^{\\phi_2}M(\\phi)\\,d\\phi.\\]\n\nBecause \\(M\\) increases toward the poles, one degree of latitude is approximately 110.57 kilometres near the equator but 111.69 kilometres near a pole on WGS 84. The equator-to-pole meridian arc is about 10,001.97 kilometres, and the full meridian ellipse is about 40,007.86 kilometres. The increase in degree length was historically important evidence for polar flattening.\n\nEast–west spacing involves a different curvature radius,\n\n\\[N(\\phi)=\\frac{a}{\\sqrt{1-e^2\\sin^2\\phi}},\\]\n\ncalled the prime vertical radius of curvature. The length of a small longitude interval along a parallel is approximately \\(N(\\phi)\\cos\\phi\\,d\\lambda\\). This distinction between \\(M\\) and \\(N\\) underlies ellipsoidal distance calculations and many map-projection formulas.\n\nThe ellipsoid must also be positioned and oriented through a geodetic datum or reference frame. The physical sea-level surface, represented approximately by the geoid, is irregular because Earth’s gravitational field varies geographically. A meridian drawn on an ellipsoid is consequently a coordinate construction rather than a line traced by a unique ridge, sea-level contour, or other visible feature. At high precision, station motion and the epoch of the coordinates also matter: a monument remains attached to its tectonic plate while its coordinates can change in a globally maintained frame."
    },
    {
      "heading": "Astronomical meridians and observations of transit",
      "text": "An observer’s celestial sphere provides the astronomical counterpart of the terrestrial meridian. The local celestial meridian is the great circle through the north and south celestial poles and the zenith and nadir. Its plane contains the local vertical and a direction parallel to Earth’s rotation axis. It divides the sky into eastern and western halves and meets an ideal astronomical horizon at its north and south points. At the geographic poles, familiar local north–south directions become degenerate.\n\nAs Earth rotates, stars and other celestial objects generally cross this circle twice during a complete diurnal circuit. Upper culmination is the crossing at which an object has its greater altitude; lower culmination is the opposite crossing. Lower culmination often occurs below the horizon, although circumpolar stars can remain visible throughout their apparent daily paths. For an object of declination \\(\\delta\\), its altitude at upper culmination, ignoring refraction and related corrections, is\n\n\\[h=90^\\circ-\\lvert\\phi-\\delta\\rvert.\\]\n\nThis relationship allowed observers to determine latitude from measured stellar altitudes. A meridian crossing does not imply that an object passes overhead: the zenith is reached only under the appropriate relationship between latitude and declination.\n\nTransit instruments were designed to observe these crossings. A telescope mounted to rotate in the meridian plane could register the instant a star crossed a wire in its field of view. A transit circle combined such timing observations with a graduated circle for measuring angular position. Accurate observations required corrections for instrument alignment, atmospheric refraction, clock error, and other effects. Nineteenth-century observatories used these measurements to maintain time and establish star positions.\n\nThe astronomical meridian is not necessarily identical to the geodetic meridian at the same station. The astronomical vertical follows local gravity, conventionally realized by a plumb line, whereas the geodetic normal is perpendicular to the reference ellipsoid. Their angular difference is the deflection of the vertical. Nearby mountains, variations in crustal density, and larger-scale gravity structure can therefore affect astronomically determined coordinates without altering the adopted ellipsoid.\n\nThis difference became especially conspicuous when satellite-based positions were compared with historical observatory meridians. The disagreement does not ordinarily indicate that an old instrument was simply misplaced. Astronomical and geocentric systems realize orientation through different observations and conventions. Modern reductions can account for vertical deflection and Earth orientation, linking historical measurements to contemporary frames while preserving the distinction between the quantities originally observed."
    },
    {
      "heading": "Meridian measurement and the determination of Earth’s figure",
      "text": "Meridian measurements connect an angular change in latitude with a measured distance on Earth’s surface. On a sphere, if a north–south arc has length \\(s\\) and subtends an angle \\(\\Delta\\phi\\) in radians, the inferred circumference is\n\n\\[C=\\frac{2\\pi s}{\\Delta\\phi}.\\]\n\nReal surveys must account for terrain, the fact that stations rarely lie exactly on one meridian, and the difference between astronomical and geodetic latitude. Nevertheless, the basic comparison of terrestrial distance with celestial angle established a powerful method for measuring Earth.\n\nIn the third century BCE, Eratosthenes compared the Sun’s geometry at Syene, near modern Aswan, and Alexandria. The traditional account describes an angular difference of about one-fiftieth of a circle and a separation of 5,000 stadia, implying a circumference of 250,000 stadia; ancient accounts also associate him with a figure of 252,000 stadia. Syene and Alexandria are not on exactly the same meridian, and uncertainty over the stadium’s length prevents an unambiguous conversion into modern units. The historical importance lies in the geometric method rather than in an asserted modern percentage accuracy.\n\nEarly modern geodesy greatly improved the measurement of long arcs through triangulation. Willebrord Snell’s survey in the Netherlands in 1615 used a network of triangles to connect measured baselines and distant stations. Jean Picard’s French survey of 1669–1670 combined triangulation with improved telescopic angular measurements. Such work reduced dependence on direct measurement over the full length of an arc and supplied better estimates of Earth’s dimensions.\n\nDuring the eighteenth century, meridian arcs helped resolve a dispute over Earth’s shape. Newtonian mechanics predicted an oblate Earth, whereas some interpretations of French survey results suggested a prolate figure. French expeditions to the equatorial region of present-day Ecuador, beginning in 1735, and to Lapland in 1736–1737 compared degree lengths at widely separated latitudes. The longer degree measured in the north supported polar flattening. Pierre Louis Maupertuis led the Lapland expedition; the equatorial enterprise included Charles Marie de La Condamine, Pierre Bouguer, and Louis Godin.\n\nMeridian measurement also shaped the metric system. In 1791, the French Academy of Sciences proposed defining the metre as one ten-millionth of the meridian quadrant from the equator to the North Pole. Jean-Baptiste Delambre and Pierre Méchain surveyed the Dunkirk–Barcelona arc between 1792 and 1798, providing observations used to realize the standard deposited in 1799. The modern metre is defined through the speed of light, not Earth’s dimensions; improved knowledge of the ellipsoid therefore does not alter the unit."
    },
    {
      "heading": "Reference meridians and international standardization",
      "text": "A zero meridian is a convention needed to turn angular differences into globally comparable longitude values. Historical cartographers used many origins, including the Canary Islands, national capitals, and observatories. In Ptolemy’s Geography, the western origin was associated with the Fortunate Islands. Later European mapping used such reference lines as Ferro, Paris, and Greenwich. Coordinates copied between systems required an explicit longitude offset, and failure to apply it could shift an entire map.\n\nThe Greenwich meridian acquired international influence through maritime charts, navigational practice, and the publication of the British Nautical Almanac from 1767. Greenwich itself had several successive observational meridians because different instruments occupied different positions. The line most closely associated with the nineteenth-century international standard passes through George Biddell Airy’s transit circle, installed in 1851 at the Royal Observatory in London.\n\nThe International Meridian Conference met in Washington, D.C., in 1884. Delegates from 25 countries considered a common initial meridian and related time conventions. The resolution selecting the meridian through the Greenwich transit instrument received 22 votes in favour, one against, and two abstentions. The conference also recommended east and west longitude numbering to \\(180^\\circ\\). Adoption was not instantaneous: national maps and administrative practices continued to use other origins for varying periods.\n\nThe modern zero-longitude reference used in major global systems is the IERS Reference Meridian, maintained through the International Earth Rotation and Reference Systems Service. At Greenwich, it lies about 5.3 arcseconds east of the Airy transit-circle line, corresponding to roughly 102 metres at that latitude. The principal reason is the transition from a locally determined astronomical orientation to a globally consistent geocentric reference, including the effect of local vertical deflection. The historic line has not ceased to be a valid monument to its original astronomical definition.\n\nContemporary longitude therefore requires more information than the name “Greenwich.” A coordinate reference system specifies the datum or frame, coordinate axes, units, and other conventions. Global navigation and mapping commonly use WGS 84 or closely aligned international frames, while national datasets may retain older local systems. A prime-meridian transformation alone cannot reconcile datasets that also differ in ellipsoid, origin, orientation, scale, or epoch. This is why historically identical-looking longitude labels can refer to measurably different positions."
    },
    {
      "heading": "Solar time, standard time, and the date boundary",
      "text": "The connection between meridians and time arises from Earth’s rotation. A full rotation corresponds to \\(360^\\circ\\), so an angular difference of \\(15^\\circ\\) corresponds to one hour in the conventional 24-hour division of a rotation. One degree corresponds to four minutes of time, and one arcminute to four seconds. For two locations, with longitude increasing eastward, the difference in their local mean solar times is\n\n\\[\\Delta t=\\frac{\\Delta\\lambda}{15^\\circ}\\ \\text{hours}.\\]\n\nAn eastern location is therefore later in local solar time than a western one at the same instant.\n\nLocal apparent solar noon occurs when the Sun crosses the upper local meridian. It is not necessarily 12:00 on a civil clock, nor does it require the Sun to be overhead. Apparent solar time is uneven because Earth’s orbit is eccentric and the equator is inclined to the orbital plane. The equation of time describes the difference between apparent solar time and mean solar time; its sign depends on the convention used, and its magnitude reaches roughly a quarter of an hour. Mean solar time replaces the real Sun’s uneven apparent motion with an idealized uniform reference.\n\nRailways and telegraphic communication made the inconvenience of numerous local times increasingly apparent in the nineteenth century. Standard time zones grouped places under shared clock times, often associated conceptually with meridians separated by \\(15^\\circ\\). In practice, zone boundaries follow political and administrative decisions rather than a regular longitude grid. Some jurisdictions use half-hour or quarter-hour offsets, and daylight-saving rules further separate clock time from the local meridian.\n\nModern civil time is normally based on Coordinated Universal Time, or UTC. UTC is maintained using atomic time and is not simply the mean solar time physically observed at Greenwich. UT1, by contrast, is an Earth-rotation time scale. Under the established UTC system, leap seconds are used to keep the difference between UTC and UT1 within 0.9 seconds. Separating atomic time from Earth-rotation time is necessary because Earth’s rotation rate is not perfectly uniform.\n\nThe International Date Line is broadly associated with the \\(180^\\circ\\) meridian but does not follow it continuously. Its deviations accommodate jurisdictions and island groups. Crossing the date boundary changes the calendar date, whereas crossing an ordinary meridian changes local solar time continuously. The distinction is essential: the antimeridian is a geometrical coordinate line, while the date boundary is a civil convention. They coincide over substantial stretches of ocean but are neither conceptually nor geographically identical."
    },
    {
      "heading": "Navigation, surveying, and directions of north",
      "text": "A local meridian establishes true north and true south: the directions along the geographic meridian toward the respective poles. These directions are distinct from the line indicated by a magnetic compass. Earth’s magnetic field varies over space and time, and its horizontal component determines magnetic north at a location. The angular difference between true north and magnetic north is magnetic declination, commonly specified as east or west.\n\nA magnetic meridian is the local vertical plane containing the magnetic field direction, or its horizontal north–south direction in practical compass work. It is not generally a geographic meridian, and compass trajectories do not simply follow constant-longitude lines. Near magnetic poles, where the horizontal field becomes weak, compass direction becomes particularly unstable. Navigation charts and geomagnetic models provide declination values for particular dates because the field changes over time.\n\nIn traditional celestial navigation, an observer could estimate latitude from the meridian altitude of the Sun or a suitable star. Longitude required relating a local astronomical observation to the time at a reference meridian. An error of four seconds in the reference time corresponds to one arcminute of longitude, approximately one nautical mile at the equator. The development of reliable marine chronometers, notably through John Harrison’s eighteenth-century work, made this time-based approach practicable at sea. The east–west distance associated with the same longitude error becomes smaller at higher latitudes.\n\nA course along a geographic meridian is a special case of a rhumb line, a path maintaining a constant angle to meridians. It is also a geodesic on an ideal sphere or rotational ellipsoid. Most other constant-compass-bearing routes, after allowing for magnetic effects, are not shortest paths. A great-circle route usually changes its angle to the meridians as it proceeds. Thus “sailing north,” “following a constant bearing,” and “taking the shortest route” coincide only in particular cases.\n\nSurveying introduces a third reference direction, grid north, determined by the northing axis of a projected coordinate grid. The angle between grid north and true north is called grid convergence. It is zero along the central meridian in many commonly used projections but generally changes elsewhere. Survey observations must distinguish corrections for magnetic declination from corrections for grid convergence; applying one does not automatically account for the other.\n\nModern global navigation satellite systems determine positions from satellite signals in a specified terrestrial reference frame. They do not need a local astronomical observation to identify each station’s meridian. Nevertheless, converting a position into a bearing, a stakeout direction, or a charted course still requires correct treatment of the ellipsoid, projection, coordinate epoch, and chosen north reference."
    },
    {
      "heading": "Meridians in map projections",
      "text": "Meridians and parallels form the graticule of a map. Their appearance depends on the map projection, not on a change in the underlying geographic coordinates. Because a curved surface cannot be represented on a plane without distortion, a map may alter meridian length, spacing, curvature, or intersection angles. The graticule therefore reveals important properties of a projection but should not be mistaken for a distortion-free rectangular framework.\n\nIn a normal cylindrical projection, meridians commonly appear as equally spaced, parallel straight lines. The Mercator projection is a prominent example. Its meridians are vertical and its parallels horizontal, preserving local angles while increasing scale toward the poles. Although geographic meridians converge on Earth, they never meet on a finite normal Mercator map; the poles occur at infinite projected distance. The apparent constant width between meridians is therefore a property of the map, not of Earth.\n\nIn normal conic projections, meridians usually appear as straight lines radiating toward the cone’s apex, while parallels are arcs of concentric circles. The angle between two mapped meridians need not equal their longitude difference. In polar azimuthal projections, meridians radiate from the pole at angles corresponding to their longitude separations. These arrangements suit different geographic extents: conic projections are widely used for midlatitude regions, while polar azimuthal projections are useful for high-latitude mapping.\n\nPseudocylindrical world maps commonly retain a straight central meridian and straight parallels but curve the other meridians. In the sinusoidal projection, for example, mapped meridians converge to point poles and the map preserves area. The Mollweide projection also preserves area, with a different graticule geometry. Interrupted projections divide the graticule into lobes, placing cuts along selected meridians or other boundaries to reduce distortion within the retained regions.\n\nA central meridian is a selected longitude used to orient or centre many projections. In the Transverse Mercator projection, it is normally a straight line and serves as the axis around which distortion is controlled. The Universal Transverse Mercator system divides most of the world into 60 nominal longitude zones, each \\(6^\\circ\\) wide. Their central meridians lie halfway between the standard zone edges; exceptions in the zone arrangement occur in Norway and around Svalbard.\n\nThe central meridian need not have a scale factor of exactly one. UTM uses a central scale factor of 0.9996, allowing scale error to be distributed across a zone rather than increasing entirely outward from an undistorted centre. Distances measured along a drawn meridian must therefore be interpreted through the projection’s scale properties. Even a straight-looking meridian on a map does not automatically provide true ground distance."
    },
    {
      "heading": "Boundaries, land systems, and digital representations",
      "text": "Meridians have often served as convenient legal boundaries because a longitude can be specified without following an irregular river or ridge. The 141st meridian west forms most of the land boundary between Alaska and Canada, while the 120th meridian west defines much of the north–south portion of the California–Nevada boundary. Such descriptions appear mathematically simple, but establishing them on the ground historically required astronomical observations, triangulation, and the erection of monuments.\n\nA legal boundary described by longitude is not always identical to the corresponding line calculated in a modern global reference frame. Original surveys contain observational errors, historical coordinates may use different datums, and boundary law may attach authority to accepted monuments or agreements. Consequently, replacing old coordinates with satellite-derived values does not by itself relocate a jurisdictional boundary. The legal definition and the coordinate realization are related but separate matters.\n\nMeridians also organize cadastral systems. In the Public Land Survey System of the United States, principal meridians and baselines provide origins for rectangular surveys. Townships are nominally six miles square, with ranges counted east or west of a principal meridian. Because geographic meridians converge poleward, an indefinitely continued rectangular grid cannot preserve both exact right angles and constant dimensions everywhere. Correction lines and guide meridians accommodate this geometry. The resulting cadastral pattern is a surveyed land-allocation system, not simply the latitude–longitude graticule.\n\nIn a geographic information system, a meridian may be stored as a line of vertices, generated mathematically as a coordinate constraint, or displayed dynamically as part of a graticule. A sequence of points with constant longitude follows a meridian in its geographic coordinate system. After projection, it may become curved, so software often inserts additional vertices to approximate the curve. Insufficient densification can produce visibly incorrect lines or inaccurate intersections.\n\nLongitude’s wraparound creates a separate computational problem. Coordinates of \\(179^\\circ\\) east and \\(179^\\circ\\) west differ by only \\(2^\\circ\\) across the antimeridian, although their numerical values differ by \\(358^\\circ\\). A naïve line-drawing or bounding-box operation may therefore span almost the whole map. Common treatments include splitting features at the antimeridian, temporarily unwrapping longitude into a continuous range, and using algorithms designed for spherical or ellipsoidal geometry.\n\nAt the poles, many longitude coordinates represent one location, and a north–south route crossing a pole continues on the opposite meridian. These singularities affect polygon construction, spatial indexing, interpolation, and global raster layouts. Reliable processing must distinguish the geometry of Earth’s surface from the rectangular coordinate arrays used to store it, especially for polar regions, global datasets, and features that cross the longitude discontinuity."
    }
  ],
  "links": [
    "earth",
    "longitude",
    "latitude",
    "prime-meridian",
    "antimeridian",
    "geodesic",
    "gravity",
    "eratosthenes",
    "alexandria",
    "geodesy",
    "ecuador",
    "international-system-of-units",
    "speed-of-light",
    "ptolemys-geography",
    "london",
    "washington-d-c",
    "coordinate-reference-system",
    "sun",
    "coordinated-universal-time",
    "international-date-line",
    "geomagnetic-field",
    "map",
    "map-projection",
    "mercator-projection",
    "sinusoidal-projection",
    "mollweide-projection",
    "canada",
    "united-states",
    "geographic-information-system"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}