{
  "id": "mass-fraction",
  "title": "Mass Fraction",
  "lang": "en",
  "source_lang": "en",
  "summary": "Mass fraction is the mass of a constituent divided by the total mass of a mixture, expressed as a dimensionless ratio.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Fraction by mass"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/mass-fraction/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/mass-fraction/",
      "json": "https://aiwiki.page/zh/mass-fraction.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Mass fraction is the ratio of the mass of a constituent to the total mass of a mixture or material. Usually denoted by \\(w_i\\) for constituent \\(i\\), it describes composition independently of the amount of material present. Mass fractions are used throughout chemistry, materials analysis, environmental science, and astrophysics. They may be reported as decimal fractions, percentages by mass, or ratios such as milligrams per kilogram."
    },
    {
      "heading": "Definition and properties",
      "text": "For a mixture whose constituents have masses \\(m_1,m_2,\\ldots,m_N\\), the mass fraction of constituent \\(i\\) is\n\n\\[w_i=\\frac{m_i}{m_{\\mathrm{tot}}} =\\frac{m_i}{\\sum_{j=1}^{N}m_j},\\]\n\nwhere \\(m_{\\mathrm{tot}}\\) is the total mass of the mixture. For an exhaustive set of nonoverlapping constituents,\n\n\\[0\\leq w_i\\leq 1, \\qquad \\sum_{i=1}^{N}w_i=1.\\]\n\nA constituent absent from the mixture has a mass fraction of zero; a pure material has a mass fraction of one for its sole constituent.\n\nThe denominator includes all material within the stated sample or system, not merely the solvent. For example, dissolving 10 g of salt in 90 g of water produces 100 g of solution with a salt mass fraction of\n\n\\[w_{\\mathrm{salt}}=\\frac{10}{10+90}=0.10.\\]\n\nThe ratio of salt mass to water mass, \\(10/90\\), is instead a solute-to-solvent mass ratio.\n\nMass fraction is dimensionless. In the International System of Units, its coherent unit is one, although an explicit unit ratio such as \\(\\mathrm{kg/kg}\\) can help identify the quantity being reported."
    },
    {
      "heading": "Reporting conventions",
      "text": "A mass percentage is 100 times the mass fraction:\n\n\\[\\text{mass percentage}=100w_i\\%.\\]\n\nThus \\(w_i=0.025\\) corresponds to 2.5% by mass, or 2.5 g of constituent per 100 g of mixture. Labels such as “mass %,” “% by mass,” and “% (m/m)” identify this basis. The expression “weight percent” is also common, although mass fraction concerns mass rather than gravitational force.\n\nSmall mass fractions are often expressed as:\n\n- \\(1\\ \\mathrm{g/kg}=10^{-3}\\);\n- \\(1\\ \\mathrm{mg/kg}=10^{-6}\\);\n- \\(1\\ \\mathrm{\\mu g/kg}=10^{-9}\\).\n\n“Parts per million” and “parts per billion” can describe such ratios, but do not by themselves specify whether the ratio concerns mass, volume, or amount of substance. Explicit units avoid that ambiguity.\n\nA mass fraction of \\(10^{-6}\\) is exactly 1 mg/kg. It is only approximately 1 mg/L in a dilute aqueous solution whose density is approximately 1 kg/L."
    },
    {
      "heading": "Relation to other composition quantities",
      "text": "Mole fraction\n\nA mole fraction describes the proportion of a constituent by amount of substance, rather than by mass:\n\n\\[x_i=\\frac{n_i}{\\sum_j n_j}.\\]\n\nUsing the molar mass \\(M_i\\) of each constituent gives the conversions\n\n\\[w_i=\\frac{x_iM_i}{\\sum_jx_jM_j},\\]\n\nand\n\n\\[x_i=\\frac{w_i/M_i}{\\sum_jw_j/M_j}.\\]\n\nEqual mole fractions therefore need not imply equal mass fractions. In an equimolar mixture, constituents with larger molar masses contribute larger shares of the total mass.\n\nMass and molar concentration\n\nMass concentration is the mass of a constituent divided by the volume of the mixture:\n\n\\[\\rho_i=\\frac{m_i}{V}.\\]\n\nIf the mixture density is \\(\\rho=m_{\\mathrm{tot}}/V\\), then\n\n\\[\\rho_i=w_i\\rho.\\]\n\nThe corresponding molar concentration is\n\n\\[c_i=\\frac{w_i\\rho}{M_i},\\]\n\nwith compatible units used throughout.\n\nUnlike concentration per unit volume, mass fraction does not change merely because a closed sample expands or contracts. Changes in temperature or pressure can change density and volume-based concentrations without changing constituent masses.\n\nVolume fraction\n\nA volume fraction expresses composition using constituent volumes. It generally cannot be substituted directly for mass fraction: constituents may have different densities, and their volumes need not be additive on mixing. Conversion therefore requires density information and a clearly specified volume convention."
    },
    {
      "heading": "Mixing and dilution",
      "text": "For several portions combined without reaction or material loss, the resulting mass fraction follows from a mass balance:\n\n\\[w_{i,\\mathrm{final}} = \\frac{\\sum_k m_k w_{i,k}}{\\sum_k m_k},\\]\n\nwhere \\(m_k\\) is the total mass of portion \\(k\\), and \\(w_{i,k}\\) is its mass fraction of constituent \\(i\\).\n\nFor example, mixing 200 g of a 10% salt solution with 300 g of a 2% salt solution gives\n\n\\[w_{\\mathrm{salt}} = \\frac{200(0.10)+300(0.02)}{500} =0.052,\\]\n\nor 5.2% salt by mass. An unweighted average of the two percentages would be incorrect because the portions have different masses.\n\nDilution with pure solvent increases total mass while leaving solute mass unchanged. Evaporation of solvent can increase solute mass fraction. If a chemical reaction occurs, species masses must also be determined from reaction stoichiometry; a simple mixing average is not generally sufficient. These calculations apply conservation of mass under ordinary chemical conditions."
    },
    {
      "heading": "Sample basis and measurement",
      "text": "A reported mass fraction depends on the definition and condition of the sample. For materials containing moisture, two common reporting bases are:\n\n- As-received or wet basis: constituent mass divided by the total sample mass, including water.\n- Dry basis: constituent mass divided by the mass remaining after water is excluded according to a specified procedure.\n\nIf drying removes only water and neither removes nor alters the constituent of interest, then\n\n\\[w_{i,\\mathrm{dry}} = \\frac{w_{i,\\mathrm{wet}}}{1-w_{\\mathrm{water,wet}}}.\\]\n\nDry-basis and wet-basis values are not directly interchangeable. Operational drying procedures may also remove other volatile substances or change the sample chemically, so the measurement basis must be stated.\n\nIn analytical chemistry, mass fractions may be determined from weighed preparation quantities or from measurements using techniques such as chromatography and spectroscopy. Their measurement uncertainty can reflect weighing, calibration, recovery, moisture correction, and sample heterogeneity. A small subsample may not represent the bulk material if its constituents are unevenly distributed."
    },
    {
      "heading": "Applications and interpretation",
      "text": "Mass fractions specify alloy composition, solution strength, mineral and soil composition, and the purity of chemical materials. They are especially convenient for mass-balance calculations because they do not require an assumption that volumes are additive.\n\nThe constituent definition matters. Elemental mass fractions and compound mass fractions describe different accounting systems. For example, a result expressed as an oxide equivalent is not necessarily the mass fraction of that oxide actually present as a separate compound.\n\nIn stellar astrophysics, \\(X\\), \\(Y\\), and \\(Z\\) conventionally denote the mass fractions of hydrogen, helium, and elements heavier than helium, respectively:\n\n\\[X+Y+Z=1.\\]\n\nHere, “metals” collectively means elements heavier than helium, rather than only elements classified as metals in chemistry.\n\nMass fraction alone does not determine a material’s structure, phase distribution, or chemical behavior. Two samples with identical bulk mass fractions can differ in how constituents are distributed among phases, or in their molecular forms. Composition expressed by mass is therefore distinct from a complete physical or chemical characterization."
    }
  ],
  "links": [
    "mass",
    "chemistry",
    "astrophysics",
    "solvent",
    "water",
    "international-system-of-units",
    "density",
    "mole-fraction",
    "amount-of-substance",
    "molar-mass",
    "mass-concentration",
    "molar-concentration",
    "temperature",
    "pressure",
    "chemical-reaction",
    "conservation-of-mass",
    "analytical-chemistry",
    "chromatography",
    "spectroscopy",
    "measurement-uncertainty",
    "hydrogen"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}