{
  "id": "mass-concentration",
  "title": "Mass Concentration",
  "lang": "en",
  "source_lang": "en",
  "summary": "Mass concentration is the mass of a constituent divided by the total volume of a mixture, commonly expressed in kilograms per cubic metre or grams per litre.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Mass-per-volume concentration"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/mass-concentration/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/mass-concentration/",
      "json": "https://aiwiki.page/zh/mass-concentration.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Mass concentration is the mass of a particular constituent divided by the total volume of the mixture containing it. It describes the composition of solutions, gas mixtures, and suspensions, and is widely used in analytical chemistry, environmental monitoring, and biochemistry. Unlike a mass fraction, which compares one mass with another, mass concentration depends on the volume occupied by the mixture and can therefore change with temperature or pressure even when its composition by mass remains unchanged."
    },
    {
      "heading": "Definition and notation",
      "text": "For a constituent \\(i\\), mass concentration is defined as\n\n\\[\\gamma_i=\\frac{m_i}{V},\\]\n\nwhere \\(m_i\\) is the mass of that constituent and \\(V\\) is the total volume of the mixture. The symbols \\(\\gamma_i\\) and \\(\\rho_i\\) are both used; notation should be defined explicitly because \\(\\rho\\) also commonly denotes density.\n\nThe denominator is the volume of the whole mixture, not the volume of the solvent before mixing. For example, dissolving 5 g of a substance and making the solution up to a final volume of 1 L produces a mass concentration of 5 g/L. Adding 5 g to 1 L of solvent does not necessarily produce exactly 1 L of solution.\n\nMass concentration can be defined locally in a nonuniform mixture:\n\n\\[\\gamma_i(\\mathbf{x},t) =\\frac{\\mathrm{d}m_i}{\\mathrm{d}V}.\\]\n\nThis continuum description allows concentration to vary with position and time, as occurs during diffusion, mixing, or transport in a river. The ratio of total constituent mass to total mixture volume then represents a volume-averaged concentration."
    },
    {
      "heading": "Units and reporting conventions",
      "text": "The coherent unit in the International System of Units is the kilogram per cubic metre, \\(\\mathrm{kg\\,m^{-3}}\\). Common laboratory and environmental units include grams per litre, milligrams per litre, and micrograms per cubic metre.\n\nUseful exact conversions are\n\n\\[1\\ \\mathrm{g\\,L^{-1}} =1\\ \\mathrm{kg\\,m^{-3}},\\]\n\n\\[1\\ \\mathrm{mg\\,L^{-1}} =10^{-3}\\ \\mathrm{kg\\,m^{-3}},\\]\n\n\\[1\\ \\mathrm{\\mu g\\,mL^{-1}} =1\\ \\mathrm{mg\\,L^{-1}}.\\]\n\nA percentage labelled mass/volume, often written “% m/v” or “% w/v,” conventionally states grams of constituent per 100 mL of final mixture. Thus, 2% m/v corresponds to 20 g/L. Despite the percent notation, this is not a dimensionless fraction: it expresses a mass divided by a volume. Explicit units are less ambiguous.\n\nParts per million and parts per billion do not, by themselves, specify mass concentration. They may refer to mass fractions, mole fractions, or other ratios. The approximation “1 mg/L equals 1 ppm” applies when ppm means mass fraction and the mixture density is approximately \\(1\\ \\mathrm{kg\\,L^{-1}}\\), as in many dilute aqueous solutions. It is not a universal conversion."
    },
    {
      "heading": "Relation to other composition quantities",
      "text": "Mass fraction and density\n\nThe mass fraction of constituent \\(i\\) is\n\n\\[w_i=\\frac{m_i}{m},\\]\n\nwhere \\(m\\) is the total mixture mass. Since the mixture density is \\(\\rho=m/V\\),\n\n\\[\\gamma_i=w_i\\rho.\\]\n\nMass fraction is dimensionless, whereas mass concentration has dimensions of mass per volume. Converting between them requires the mixture density at the relevant conditions.\n\nIf all constituents are included consistently,\n\n\\[\\sum_i\\gamma_i=\\rho, \\qquad \\sum_i w_i=1.\\]\n\nMass concentration therefore has the same dimensions as density, but a different emphasis: density concerns the total mass of the mixture, while a constituent’s mass concentration concerns only that constituent. It is not generally equal to the density of the pure constituent.\n\nMolar concentration\n\nMolar concentration measures amount of substance per mixture volume:\n\n\\[c_i=\\frac{n_i}{V}.\\]\n\nIts relation to mass concentration is\n\n\\[\\gamma_i=c_iM_i,\\]\n\nwhere \\(M_i\\) is the constituent’s molar mass. Units must be consistent. For example, multiplying a concentration in \\(\\mathrm{mol\\,L^{-1}}\\) by a molar mass in \\(\\mathrm{g\\,mol^{-1}}\\) gives mass concentration in \\(\\mathrm{g\\,L^{-1}}\\).\n\nThe chemical entity must be specified. Concentrations reported as the mass of a hydrated salt, its anhydrous equivalent, or a particular element within that salt are different quantities. Environmental results reported “as nitrogen,” for example, express the mass attributable to nitrogen, not the total mass of the nitrogen-containing compound."
    },
    {
      "heading": "Dependence on physical conditions",
      "text": "For a closed sample with unchanged constituent masses, expansion increases volume and lowers mass concentration; compression has the opposite effect. Consequently, temperature and, especially for gases, pressure can be essential parts of a reported value.\n\nFor an ideal gas mixture, the mass concentration of constituent \\(i\\) is\n\n\\[\\gamma_i=\\frac{p_iM_i}{RT} =\\frac{x_i pM_i}{RT},\\]\n\nwhere \\(p_i\\) is its partial pressure, \\(x_i\\) its mole fraction, \\(p\\) the total pressure, \\(R\\) the gas constant, and \\(T\\) the absolute temperature. A gas mass concentration therefore cannot be converted to a mole fraction without specifying pressure and temperature, together with an appropriate gas model.\n\nGas measurements may be reported per actual sampled volume or per volume corrected to reference conditions. Values using different temperature, pressure, or moisture conventions are not directly comparable."
    },
    {
      "heading": "Preparation, dilution, and measurement",
      "text": "A solution of known mass concentration can be prepared by weighing a constituent, dissolving it, and adjusting the final solution volume. Relevant factors include purity, water content, weighing accuracy, and the temperature at which the volume is established.\n\nWhen dilution conserves the mass of the specified constituent,\n\n\\[\\gamma_{i,1}V_1=\\gamma_{i,2}V_2.\\]\n\nHere \\(V_2\\) is the final mixture volume, not necessarily the sum of the original solution and added solvent volumes. The relation assumes that the constituent is not lost through reaction, precipitation, evaporation, or adsorption.\n\nUnknown concentrations are commonly determined using spectroscopy, chromatography, or mass spectrometry, with instrument responses related to concentration through calibration. Some methods instead determine a constituent’s mass from a separated residue.\n\nFor a direct determination \\(\\gamma=m/V\\), an approximate uncertainty relation is\n\n\\[\\left(\\frac{u(\\gamma)}{\\gamma}\\right)^2 \\approx \\left(\\frac{u(m)}{m}\\right)^2+ \\left(\\frac{u(V)}{V}\\right)^2,\\]\n\nprovided the mass and volume uncertainties are uncorrelated and linear uncertainty propagation is adequate. In practical analysis, measurement uncertainty may also include contributions from sampling, calibration, recovery, blanks, and sample preparation."
    },
    {
      "heading": "Applications and interpretation",
      "text": "Mass concentration is particularly useful when mass is directly measurable or when a mixture has no single well-defined molar mass. Examples include protein preparations, complex extracts, and airborne aerosol particles.\n\nIn water analysis, the measured quantity depends on how the sample is collected and processed. “Dissolved,” “suspended,” and “total” concentrations may describe different operationally defined portions of a sample. In air monitoring, particle mass concentration may additionally depend on the particle-size range collected.\n\nA concentration value alone does not specify the total mass present. A small sample and a large reservoir can have the same concentration but contain very different amounts of a substance. Nor does mass concentration alone determine chemical reactivity: chemical form, interactions within the mixture, and thermodynamic activity can be important even when reported concentrations are identical."
    }
  ],
  "links": [
    "mass",
    "analytical-chemistry",
    "biochemistry",
    "density",
    "solvent",
    "diffusion",
    "river",
    "international-system-of-units",
    "mass-fraction",
    "molar-concentration",
    "amount-of-substance",
    "molar-mass",
    "nitrogen",
    "temperature",
    "pressure",
    "ideal-gas",
    "gas-constant",
    "adsorption",
    "spectroscopy",
    "chromatography",
    "mass-spectrometry",
    "calibration",
    "measurement-uncertainty",
    "protein",
    "thermodynamic-activity"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}