{
  "id": "lumen",
  "title": "Lumen",
  "lang": "en",
  "source_lang": "en",
  "summary": "The lumen is the SI unit of luminous flux, measuring light output weighted by the spectral sensitivity of human daylight vision.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/lumen/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/lumen/",
      "json": "https://aiwiki.page/zh/lumen.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The lumen (symbol lm) is the International System of Units (SI) unit of luminous flux: the rate at which visible light is emitted, transmitted, or received, weighted according to a standardized model of human visual sensitivity. Unlike a watt, which measures physical power, a lumen measures light on a visual-response scale. It is widely used to specify the output of lamps, luminaires, and projectors."
    },
    {
      "heading": "Definition and relation to the candela",
      "text": "The lumen is a derived SI unit defined in terms of the candela, the SI base unit of luminous intensity, and the steradian, the unit of solid angle:\n\n\\[1\\ \\mathrm{lm}=1\\ \\mathrm{cd\\,sr}.\\]\n\nA source with a uniform luminous intensity of one candela emits one lumen into a solid angle of one steradian. More generally, luminous flux is obtained by integrating luminous intensity over the relevant directions:\n\n\\[\\Phi_{\\mathrm v}=\\int_{\\Omega} I_{\\mathrm v}\\,\\mathrm d\\Omega,\\]\n\nwhere \\(\\Phi_{\\mathrm v}\\) is luminous flux, \\(I_{\\mathrm v}\\) is luminous intensity, and \\(\\mathrm d\\Omega\\) is an element of solid angle.\n\nA complete sphere subtends \\(4\\pi\\) steradians. An ideal source emitting one candela uniformly in every direction therefore has a total luminous flux of\n\n\\[\\Phi_{\\mathrm v}=4\\pi\\ \\mathrm{lm}\\approx12.57\\ \\mathrm{lm}.\\]\n\nAlthough the steradian is dimensionless in SI dimensional analysis, retaining it in unit expressions distinguishes luminous intensity, measured in candelas, from luminous flux, measured in lumens."
    },
    {
      "heading": "Visual weighting and radiant power",
      "text": "The lumen belongs to photometry, which measures light using standardized visual-response functions. Radiometry, by contrast, measures electromagnetic radiation in physical power and energy units, independently of human vision.\n\nHuman daylight vision is most sensitive to yellow-green light and less sensitive to wavelengths near the violet and red ends of the visible spectrum. Consequently, equal radiant powers at different wavelengths generally correspond to different luminous fluxes.\n\nFor a spectral radiant-flux distribution expressed per unit wavelength, luminous flux is conventionally calculated as\n\n\\[\\Phi_{\\mathrm v} = K_{\\mathrm m} \\int_0^\\infty V(\\lambda)\\, \\Phi_{\\mathrm e,\\lambda}(\\lambda)\\, \\mathrm d\\lambda,\\]\n\nwhere:\n\n- \\(V(\\lambda)\\) is the standard photopic spectral luminous-efficiency function;\n- \\(\\Phi_{\\mathrm e,\\lambda}(\\lambda)\\) is spectral radiant flux;\n- \\(K_{\\mathrm m}\\) is the maximum photopic luminous efficacy, conventionally taken as approximately \\(683\\ \\mathrm{lm\\,W^{-1}}\\).\n\nThe exact SI defining condition fixes the luminous efficacy of monochromatic radiation at a frequency of \\(540\\times10^{12}\\ \\mathrm{Hz}\\) to 683 lumens per watt. This frequency corresponds to a vacuum wavelength of approximately 555 nanometres, using the speed of light.\n\nThus, one watt of radiant power at that defining frequency corresponds to exactly 683 lumens. One watt of broadband white light does not generally correspond to 683 lumens, because its power is distributed over wavelengths with different visual weightings. Infrared and ultraviolet radiation contribute essentially nothing to ordinary photopic lumen measurements.\n\nThe standard weighting represents a reference observer, not every individual's response. It also does not describe all viewing conditions: dark-adapted and intermediate-light vision have different spectral sensitivities."
    },
    {
      "heading": "Distinction from related quantities",
      "text": "Several quantities used in lighting describe different aspects of the same light field.\n\nQuantity | Unit | Meaning\nLuminous flux | lumen, lm | Total visually weighted light flow\nLuminous intensity | candela, cd | Luminous flux per unit solid angle in a specified direction\nIlluminance | lux, lx | Incident luminous flux per unit area\nLuminance | candela per square metre, cd/m² | Directional light output per projected area\n\nOne lux equals one lumen per square metre. If 1,000 lumens fall uniformly on an area of 10 square metres, the illuminance is 100 lux. Actual illuminance depends on distance, beam distribution, orientation, obstructions, and reflections.\n\nLumens alone do not specify beam concentration. Two lamps with equal lumen outputs can have very different peak intensities if one emits a narrow beam and the other spreads light broadly. Likewise, the same flux emitted from a small surface can produce a higher luminance than when emitted from a large surface."
    },
    {
      "heading": "Luminous efficacy and electrical consumption",
      "text": "Luminous efficacy expresses luminous flux per unit power, in lumens per watt. The denominator must be identified:\n\n- Luminous efficacy of radiation compares luminous flux with the radiant power of the light itself.\n- Luminous efficacy of a source commonly compares emitted luminous flux with electrical input power.\n\nFor example, a lamp producing 800 lumens while consuming 8 watts has an electrical luminous efficacy of\n\n\\[\\frac{800\\ \\mathrm{lm}}{8\\ \\mathrm W} = 100\\ \\mathrm{lm\\,W^{-1}}.\\]\n\nThis does not imply that all its electrical input becomes visible radiation. The result combines electrical-to-optical conversion efficiency with the visual effectiveness of the emitted spectrum.\n\nLumen output therefore provides a more direct comparison of light output than electrical wattage. It does not, however, specify colour appearance, colour rendering, beam shape, or glare."
    },
    {
      "heading": "Measurement and practical use",
      "text": "Total luminous flux is commonly measured with an integrating sphere or a goniophotometer. An integrating sphere uses a diffusely reflecting interior to collect light from many directions. A goniophotometer measures directional output, from which total flux can be calculated by angular integration.\n\nReliable measurements require calibration, control of operating conditions, and evaluation of measurement uncertainty. Important influences include detector spectral response, source temperature, electrical supply, stabilization time, and the source's angular distribution.\n\nLighting specifications may distinguish the output of a bare lamp or light source from the output of a complete luminaire. Optical components such as diffusers, lenses, and reflectors can reduce the flux leaving the complete product. Rated output also refers to specified test conditions; actual output can change with operating temperature, dimming, and ageing.\n\nProjector output is also expressed in lumens. Comparisons depend on the measurement method, image settings, and whether the stated value describes projected output or another part of the optical system."
    },
    {
      "heading": "Development of the definition",
      "text": "The lumen developed as a unit of luminous flux within photometry and became tied to the candela as international lighting units were standardized.\n\nIn 1979, the General Conference on Weights and Measures adopted a candela definition based on monochromatic radiation at \\(540\\times10^{12}\\) hertz and radiant intensity. The revised SI that took effect in 2019 expressed the definition through the fixed numerical value of the luminous efficacy constant \\(K_{\\mathrm{cd}}\\). These changes preserved continuity in practical lumen measurements while placing the unit on a physical basis independent of a particular lamp or material standard."
    }
  ],
  "links": [
    "international-system-of-units",
    "luminous-flux",
    "light",
    "candela",
    "steradian",
    "electromagnetic-radiation",
    "speed-of-light",
    "calibration",
    "measurement-uncertainty",
    "general-conference-on-weights-and-measures"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}