{
  "id": "longshore-drift",
  "title": "Longshore Drift",
  "lang": "en",
  "source_lang": "en",
  "summary": "Longshore drift is the movement of coastal sediment parallel to the shoreline, driven mainly by waves approaching the coast at an angle.",
  "category": "geography",
  "subcategory": "",
  "type": "concept",
  "aliases": [
    "Littoral drift",
    "Alongshore sediment transport",
    "Longshore sediment transport"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/longshore-drift/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/longshore-drift/",
      "json": "https://aiwiki.page/zh/longshore-drift.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Longshore drift is the movement of sediment along a coast, approximately parallel to the shoreline, primarily through the action of obliquely approaching waves and the currents they generate. It transports sand, gravel, and other loose material within the beach and nearshore zone, redistributing sediment rather than necessarily removing it from the coastal system. As a major form of sediment transport, it helps shape beaches, spits, and coastal barriers, and strongly influences the effects of harbours and shore-protection structures."
    },
    {
      "heading": "How it works",
      "text": "Longshore drift involves two closely connected processes: movement across the beach face by successive waves, and transport by currents flowing along the shore.\n\nSwash and backwash\n\nWhen waves approach a beach at an angle, the uprush of water, called swash, commonly carries sediment diagonally up the beach. The returning flow, or backwash, tends to move more directly downslope under gravity. Repeated uprush and return flow can therefore move individual particles along a roughly zigzag path, producing a net displacement along the coast.\n\nThis familiar explanation is especially useful for understanding transport on the beach face, including the movement of gravel. It is an idealization: actual flow paths depend on beach slope, wave interactions, infiltration, and currents already present.\n\nLongshore currents\n\nWithin the surf zone, where waves break, obliquely incident waves transfer momentum to the water and generate a longshore current. Breaking waves and turbulence stir sediment from the bed, allowing this current to carry it along the shore. Grains may move by rolling or sliding, by short hops known as saltation, or in suspension.\n\nFor many sandy coasts, transport in the surf zone is a major component of the total sediment movement. Longshore drift should therefore not be understood solely as the visible zigzag motion of pebbles on a beach.\n\nA longshore current is a movement of water; longshore drift is a movement of sediment. Their strengths are related, but a current can carry little material if the seabed is rocky, sediment is scarce, or available grains are too coarse to be mobilized."
    },
    {
      "heading": "Controls on direction and rate",
      "text": "The principal controls include:\n\n- Wave angle: Waves breaking obliquely to the shoreline generally drive transport along it. In an idealized setting, waves arriving perpendicular to a straight beach generate little wave-driven longshore transport.\n- Wave height and period: Larger, more energetic waves usually mobilize more sediment, although the resulting transport also depends on water depth and breaking conditions.\n- Sediment properties: Grain size, density, shape, and sorting affect how easily particles are entrained and how they travel.\n- Coastal geometry: Headlands, offshore banks, and seabed contours alter wave approach through wave refraction and other transformations.\n- Water level and currents: Tides, wind-driven flows, and storm surges change where waves break and can modify the magnitude or direction of transport.\n- Sediment availability: A coast may have considerable transport capacity but little actual transport if loose sediment is unavailable.\n\nThe direction of drift can reverse as wave conditions change. A coastline may have a dominant annual direction while experiencing substantial movement in the opposite direction during particular seasons or storms.\n\nGross transport is the combined amount moved in both alongshore directions over a stated period. Net transport is the difference between those opposing amounts. A small net value can therefore conceal large volumes of sediment moving back and forth."
    },
    {
      "heading": "Sediment budgets and shoreline change",
      "text": "Longshore drift is central to the sediment budget of a coast: the balance between sediment entering, leaving, and being stored within a defined area. Sources may include eroding cliffs, river inputs, offshore deposits, and artificial additions. Sediment may leave through submarine channels, tidal inlets, offshore transport, or human removal.\n\nTransport alone does not necessarily cause coastal erosion. What matters is how transport changes along the shore. If more sediment leaves a stretch of beach than enters it, that stretch tends to lose material. If more enters than leaves, sediment tends to accumulate.\n\nIn a simplified model that represents shoreline movement using a single coastline, sediment conservation can be expressed as\n\n\\[D\\frac{\\partial y}{\\partial t} = -\\frac{\\partial Q}{\\partial x}+s,\\]\n\nwhere \\(y\\) is the shoreline position measured positive seaward, \\(x\\) is distance along the coast, \\(t\\) is time, \\(D\\) is the effective vertical thickness of the active coastal profile, \\(Q\\) is the bulk alongshore sediment-transport rate, and \\(s\\) represents net sediment inputs per unit length of coastline. The equation illustrates why changes in transport along the coast, rather than transport magnitude alone, control erosion and accretion.\n\nSuch models simplify a three-dimensional system. They cannot fully represent cross-shore sediment exchange, complex inlet circulation, or rapid changes in beach profile during storms."
    },
    {
      "heading": "Landforms associated with longshore drift",
      "text": "Longshore drift helps create and maintain several characteristic coastal features.\n\nSpits are elongated deposits attached to land at one end. They can develop where sediment moving along a coast continues beyond a bend in the shoreline or across part of an inlet. Their tips may curve as wave directions and tidal currents vary.\n\nTombolos are sediment connections between an island and another landmass. They form where altered wave and current conditions around an island favour deposition; alongshore sediment supply may contribute to their growth.\n\nBarrier islands exchange sediment with adjacent shorelines and tidal inlets through longshore transport. Their evolution also involves overwash, cross-shore movement, inlet migration, and changes in sea level.\n\nBeaches can undergo rotation, with sediment accumulating at one end and being lost from the other as the prevailing wave direction changes. This may occur without a comparable change in the beach’s total sediment volume.\n\nNone of these landforms is explained by longshore drift alone. Their development also depends on sediment supply, geological setting, tidal conditions, and available space for deposition."
    },
    {
      "heading": "Observation and prediction",
      "text": "Longshore transport is studied using repeated beach surveys, seabed mapping, wave and current measurements, sediment tracers, and observations of accumulation beside structures. Aerial photographs and satellite imagery reveal shoreline changes, while a geographic information system can integrate measurements across different dates and coastal sectors.\n\nTransport formulas commonly relate sediment movement to breaking-wave energy and wave angle. Numerical models may instead simulate waves, currents, sediment motion, and changing seabed geometry together.\n\nPredictions remain uncertain because transport is highly variable and often concentrated in a few energetic events. Formulas developed for sandy beaches may perform poorly on gravel beaches or mixed-sediment coasts. Shoreline position alone is also an incomplete measure: the visible beach can narrow or widen because sediment moves offshore or onshore, even when alongshore exchange is limited."
    },
    {
      "heading": "Coastal engineering and management",
      "text": "Structures that interrupt longshore drift can redistribute erosion and deposition.\n\nA groyne, usually built across the beach approximately perpendicular to the shoreline, traps some sediment moving alongshore. Accumulation commonly occurs on its updrift side, while reduced supply can contribute to erosion downdrift. The outcome depends on structure dimensions, sediment availability, and the frequency of drift reversals.\n\nHarbour entrances and their training structures can similarly intercept sediment or divert it into navigation channels. Dredging and sediment-bypassing systems may be used to move trapped material past an obstruction and maintain supply to adjacent beaches.\n\nBeach nourishment adds sediment to the coastal system. Its persistence depends partly on compatibility with native sediment and on subsequent redistribution by waves and currents. Movement away from the placement site does not necessarily mean the material has left the wider coastal system.\n\nManagement therefore often considers connected stretches of coastline rather than individual properties. Under sea-level rise, beaches may require additional sediment to maintain their form, while changes in wave climate and storm conditions can alter alongshore transport. These interactions make sediment connectivity an important consideration in shoreline protection, harbour design, and managed retreat."
    }
  ],
  "links": [
    "sediment-transport",
    "gravity",
    "saltation",
    "refraction",
    "storm-surge",
    "coastal-erosion",
    "barrier-island",
    "geographic-information-system",
    "groyne",
    "sea-level-rise",
    "managed-retreat"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}