{
  "id": "liquid-liquid-extraction",
  "title": "Liquid–Liquid Extraction",
  "lang": "en",
  "source_lang": "en",
  "summary": "Liquid–liquid extraction separates dissolved substances by distributing them between two liquid phases, enabling purification, recovery, and analytical sample preparation.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Liquid extraction",
    "Solvent extraction",
    "Liquid–liquid partitioning"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/liquid-liquid-extraction/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/liquid-liquid-extraction/",
      "json": "https://aiwiki.page/zh/liquid-liquid-extraction.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Liquid–liquid extraction (LLE) is a separation process in which a dissolved substance transfers between two liquid phases that are immiscible or only partly miscible. Separation depends on differences in the substances’ relative affinities for the phases. Commonly, one phase is water and the other is an organic solvent, although other combinations are possible. The method is used to recover valuable products, remove impurities, and prepare samples for analysis. Unlike distillation, it does not require vaporizing the material being separated."
    },
    {
      "heading": "Principle and terminology",
      "text": "When two liquid phases contact one another, dissolved substances can cross their interface. Each substance distributes between the phases until chemical equilibrium is reached. The composition of each phase generally differs, allowing one substance to be preferentially transferred while others remain behind.\n\nThe original solution is called the feed. After extraction, the solvent-rich phase containing transferred material is the extract, and the depleted feed-rich phase is the raffinate. These terms describe the process roles of the phases, not whether they occupy the upper or lower layer.\n\nThe term solvent extraction is often used interchangeably with liquid–liquid extraction, especially in industrial practice. More broadly, however, solvent extraction can also mean extracting substances from solids, which is a different operation.\n\nAn extraction solvent may contain several components:\n\n- A diluent, which provides most of the liquid volume.\n- An extractant, which selectively binds or reacts with the target substance.\n- A modifier, which improves solubility, phase separation, or other operating properties.\n\nIn simple laboratory extractions, one liquid can serve all the necessary solvent functions."
    },
    {
      "heading": "Thermodynamic basis",
      "text": "At equilibrium, the chemical potential of a transferable chemical species is equal in both phases. Differences in solvation and molecular interactions determine its equilibrium distribution. Relevant interactions include hydrogen bonding, electrostatic interactions, and van der Waals forces.\n\nFor a single chemical species \\(A\\), an activity-based partition constant can be written as\n\n\\[K_A=\\frac{a_{A,\\mathrm{org}}}{a_{A,\\mathrm{aq}}},\\]\n\nwhere \\(a\\) denotes thermodynamic activity, and the subscripts identify the organic and aqueous phases. The value depends on temperature and on the specified standard states.\n\nUnder suitably dilute, fixed-medium conditions, a concentration-based partition coefficient is often used:\n\n\\[P_A=\\frac{[A]_{\\mathrm{org}}}{[A]_{\\mathrm{aq}}}.\\]\n\nConcentration ratios can vary when solution nonideality becomes important, even if the corresponding thermodynamic equilibrium constant remains unchanged.\n\nDistribution ratio versus partition coefficient\n\nA substance may exist in several forms: neutral molecules, charged species, complexes, or aggregates. The distribution ratio, \\(D\\), compares the total analytical concentration of that substance in each phase:\n\n\\[D=\\frac{C_{\\mathrm{org,total}}}{C_{\\mathrm{aq,total}}}.\\]\n\nThis differs from a partition coefficient for one specified chemical species. Distribution ratios can change strongly with pH, extractant concentration, salt concentration, and loading.\n\nFor example, a weak acid \\(HA\\) may partition into an organic phase mainly in its neutral form, while its anion \\(A^-\\) remains in water. If only neutral \\(HA\\) is appreciably extracted and the aqueous solution behaves approximately ideally,\n\n\\[D=\\frac{P_{HA}}{1+10^{\\mathrm{pH}-\\mathrm{p}K_a}},\\]\n\nwhere \\(\\mathrm{p}K_a\\) is the negative base-10 logarithm of the aqueous acid dissociation constant. Thus, increasing pH usually reduces extraction of such an acid. Weak bases commonly show the opposite trend because protonation favors retention in the aqueous phase.\n\nThese expressions are conditional: ion pairing, complex formation, or extraction of charged species can produce different behavior."
    },
    {
      "heading": "Recovery and selectivity",
      "text": "For a single extraction of an initially aqueous solute with solute-free organic solvent, a simple mass balance gives the fraction transferred to the organic phase:\n\n\\[E=\\frac{D V_{\\mathrm{org}}} {V_{\\mathrm{aq}}+D V_{\\mathrm{org}}},\\]\n\nwhere \\(V_{\\mathrm{aq}}\\) and \\(V_{\\mathrm{org}}\\) are the equilibrium phase volumes. This relation assumes equilibrium, a constant distribution ratio, and no loss through reaction, precipitation, or handling.\n\nExtraction therefore depends on both the distribution ratio and the phase-volume ratio. A large distribution ratio does not by itself guarantee nearly complete recovery if very little extracting solvent is used.\n\nRepeated extractions with fresh solvent are generally more effective than one extraction using the same total solvent volume. If a total organic volume \\(V_T\\) is divided into \\(n\\) equal portions, the fraction remaining in the aqueous phase is\n\n\\[q_n= \\left( \\frac{V_{\\mathrm{aq}}} {V_{\\mathrm{aq}}+D V_T/n} \\right)^n.\\]\n\nThis expression assumes constant phase volumes and distribution ratio across the stages. For example, if \\(D=4\\), an aqueous volume of \\(100\\ \\mathrm{mL}\\), and a total organic volume of \\(100\\ \\mathrm{mL}\\) are used, one extraction transfers 80% of the solute. Two extractions with \\(50\\ \\mathrm{mL}\\) portions transfer approximately 88.9%.\n\nSeparating two solutes requires selectivity, not merely high recovery. A common measure is the separation factor\n\n\\[\\alpha_{A/B}=\\frac{D_A}{D_B}.\\]\n\nValues far from unity indicate preferential extraction of one substance. Actual process performance also depends on solvent capacity, extraction rates, and the number of stages."
    },
    {
      "heading": "Extraction mechanisms",
      "text": "Physical partitioning\n\nIn physical extraction, a solute transfers because it is more favorably solvated in one phase than the other, without requiring a distinct extraction reaction. Many neutral organic compounds can be extracted from water into organic solvents this way.\n\nPolarity, molecular size, and the hydrophobic effect influence partitioning, but simple rules such as “like dissolves like” do not reliably predict quantitative performance.\n\nAcid–base extraction\n\nAcid–base reactions alter the charge state of a solute and therefore its affinity for the phases. A neutral organic acid may enter an organic solvent, whereas its deprotonated salt often favors water. A neutral base may behave similarly until protonation makes it more water-soluble.\n\nThis permits selective separation of acidic, basic, and neutral compounds. Changing pH can also reverse the transfer, allowing material to be recovered from an organic extract.\n\nReactive and metal-ion extraction\n\nAn extractant may form an organic-soluble complex or ion pair with the target substance. In metal separations, coordination chemistry is central: an organic-soluble ligand binds a metal, often coupled to proton release, counter-ion transfer, or changes in hydration.\n\nExtraction can therefore depend on ligand concentration, acidity, competing ions, and the metal’s oxidation state. The extracting phase has a finite loading capacity, and its behavior may become strongly nonlinear as that capacity is approached."
    },
    {
      "heading": "Contacting and phase separation",
      "text": "Extraction requires both adequate contact between the liquids and their subsequent separation.\n\nIn laboratory work, a separatory funnel is a common device. Mixing creates droplets and increases interfacial area; settling then allows the phases to form separate layers. Which layer is on top depends on density, not on whether it is organic or aqueous.\n\nTransfer rates are governed by mass transfer, including transport within each phase and across the interface. Diffusion, droplet size, mixing intensity, and interfacial conditions affect how quickly equilibrium is approached. For reactive extraction, chemical reaction rates may also matter.\n\nIndustrial equipment includes:\n\n- Mixer–settlers, which combine a mixing chamber with a settling zone.\n- Extraction columns, in which one phase moves as droplets through the other; packing, trays, pulsation, or mechanical agitation improve contact.\n- Centrifugal contactors, which combine rapid contacting with centrifugal phase separation.\n\nMore vigorous mixing can accelerate transfer but may produce smaller droplets that separate slowly. Stable emulsions, entrained droplets, and solids at the interface can impair operation. Viscosity, density difference, and interfacial tension are therefore important design variables."
    },
    {
      "heading": "Multistage operation and solvent regeneration",
      "text": "Industrial systems frequently use several contacting stages. In cross-current extraction, each stage receives fresh solvent. In counter-current extraction, the feed and solvent travel through the stages in opposite directions, allowing efficient solvent use and high recovery.\n\nAn ideal equilibrium stage produces two exiting phases that are in equilibrium with one another. Real equipment may not achieve this condition, so design must account for stage efficiency or continuous mass-transfer rates. When solvent and feed have appreciable mutual solubility, ternary phase diagrams and tie lines help describe equilibrium compositions and phase amounts.\n\nThe loaded solvent commonly undergoes further treatment:\n\n- Scrubbing removes co-extracted impurities while retaining much of the target substance.\n- Stripping, or back-extraction, transfers the target into another liquid phase.\n- Regeneration restores the solvent for reuse.\n\nStripping may use altered acidity, a competing ligand, or a change in oxidation state. In other processes, evaporation or distillation recovers the solvent or product. Consequently, avoiding vaporization during extraction does not necessarily eliminate thermal energy demand from the overall process."
    },
    {
      "heading": "Applications and development",
      "text": "Liquid–liquid partitioning became a quantitative subject through nineteenth-century work on solution equilibria; Walther Nernst formulated the distribution law in 1891. Twentieth-century developments in selective extractants and continuous contacting equipment greatly expanded industrial applications.\n\nMajor uses include:\n\n- Analytical sample preparation. LLE isolates and concentrates substances from complex samples before chromatography, mass spectrometry, or other measurements. Performance is assessed through recovery, selectivity, reproducibility, and contamination control.\n- Chemical manufacture. Extraction separates products, removes impurities, and recovers substances from reaction mixtures, particularly where volatility differences are unfavorable.\n- Hydrometallurgy. Selective extractants recover and purify metals from aqueous solutions, including copper, nickel, cobalt, uranium, and rare-earth elements.\n- Nuclear fuel processing. Solvent extraction separates uranium, plutonium, and other constituents in some reprocessing schemes; these operations require specialized radiological and chemical controls.\n- Biotechnology. Extraction can recover fermentation products and other biomolecules. Conventional organic solvents can destabilize sensitive proteins, motivating alternative phase systems.\n- Environmental processing. Extraction can recover selected dissolved contaminants or valuable compounds from liquid waste streams."
    },
    {
      "heading": "Variants",
      "text": "Aqueous two-phase extraction uses two water-rich phases, often formed by incompatible polymers or by a polymer and a salt. Although both phases contain substantial water, they differ in composition and in their affinity for solutes.\n\nLiquid-phase microextraction uses very small extracting-phase volumes. It can provide enrichment while reducing solvent consumption, although small volumes make losses, reproducibility, and handling especially important.\n\nDispersive liquid–liquid microextraction creates fine extracting-solvent droplets throughout a sample to accelerate transfer. The droplets are subsequently collected, commonly by centrifugation.\n\nMembrane-supported extraction uses a membrane to maintain or stabilize the interface between liquids. It can limit bulk mixing, although membrane resistance, wetting, and solvent loss affect performance."
    },
    {
      "heading": "Limitations and environmental considerations",
      "text": "Solvent choice involves competing requirements: selectivity, capacity, low mutual solubility, rapid phase separation, chemical stability, and ease of recovery. Flammability, toxicity, volatility, cost, and waste generation also matter.\n\nImportant limitations include:\n\n- Incomplete selectivity: chemically similar substances may have similar distribution ratios.\n- Solvent loss: dissolution in the raffinate, entrainment, and evaporation can cause contamination and operating costs.\n- Emulsion and third-phase formation: persistent dispersions or an additional liquid phase can disrupt separation.\n- Composition dependence: loading, salt concentration, acidity, and temperature can alter equilibrium behavior.\n- Scale-up difficulties: droplet formation, coalescence, and flow patterns do not necessarily remain similar as equipment size increases.\n\nReduced solvent volume does not automatically mean lower environmental impact. Overall performance depends on solvent hazard, recovery efficiency, energy use, equipment requirements, and waste treatment. Alternatives such as adsorption, membrane separation, crystallization, or distillation may be preferable for particular mixtures; industrial processes often combine several methods."
    }
  ],
  "links": [
    "water",
    "solvent",
    "distillation",
    "chemical-equilibrium",
    "chemical-potential",
    "hydrogen-bond",
    "van-der-waals-forces",
    "thermodynamic-activity",
    "ph",
    "hydrophobic-effect",
    "acid-base-reaction",
    "coordination-chemistry",
    "ligand",
    "ion",
    "oxidation-state",
    "density",
    "mass-transfer",
    "diffusion",
    "viscosity",
    "surface-tension",
    "evaporation",
    "chromatography",
    "mass-spectrometry",
    "protein",
    "adsorption"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}