{
  "id": "lever",
  "title": "Lever",
  "lang": "en",
  "source_lang": "en",
  "summary": "A lever is a body that turns about a support to transmit force, trading force against displacement according to the geometry of its moment arms.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Simple lever"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/lever/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/lever/",
      "json": "https://aiwiki.page/zh/lever.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A lever is a mechanical device consisting of a relatively rigid body that can turn about a support or axis, traditionally called the fulcrum. Forces applied at different positions produce turning effects, allowing the device to transmit motion, change its direction, or exchange a large movement under a small force for a small movement under a large force. Crowbars, scissors, balance beams, wheelbarrows, and many moving parts of animals operate through lever action.\n\nThe lever is one of the traditional simple machines and a fundamental example in classical mechanics. Its governing principle is the balance of moments: for equilibrium, the clockwise and counterclockwise turning effects must cancel. The familiar statement that force multiplied by distance is equal on both sides applies when “distance” means the perpendicular distance from the pivot to the force’s line of action. This distinction allows the same principle to describe straight bars, bent handles, rotating joints, and complex linkages.\n\nLevers do not create energy. An ideal lever that multiplies force requires a correspondingly greater input displacement, while real devices also lose useful mechanical energy through friction and deformation. Their importance therefore lies not in producing work from nothing, but in matching available forces and movements to particular tasks—from lifting a stone to measuring mass or accelerating a limb."
    },
    {
      "heading": "Physical structure and the ideal lever",
      "text": "The elementary model of a lever contains three elements: an effort, a load, and a fulcrum. The effort is the input force applied by a person, motor, muscle, or another mechanism. The load is the resistance acted upon at the output. Neither term describes an intrinsic property of a particular force: the same device can be driven from either end, reversing which force is designated the effort and which the load. The fulcrum constrains the lever’s motion and supplies a reaction force.\n\nA lever need not be a straight bar. A bent metal member, a disk with attached handles, or a shaped machine component can perform the same function. Its essential geometric properties are the locations of its rotation axis and the lines along which forces act. In the simplest treatment, the member is a rigid body, meaning that distances between its points remain constant. Actual materials deform, but the rigid approximation is often accurate when these deformations are small compared with the intended movement.\n\nThe support may take several forms. A seesaw turns on an axle; a balance beam rests on a narrow bearing; a crowbar may bear against a stone; and a flexure-supported mechanism rotates through elastic bending rather than sliding at a conventional joint. A door also exhibits lever action about its hinges, although it is not usually introduced as one of the elementary classroom examples. In each case, the support defines or approximates a permitted rotational motion. A support that shifts or rolls can make the effective pivot change during operation.\n\nAn ideal lever is commonly assumed to be massless, perfectly rigid, and supported by a frictionless pivot. These assumptions isolate the relationship between the input and output forces. A real lever’s own mass can be included by treating its weight as acting through its center of mass in a uniform gravitational field. A counterweight may deliberately use this effect to balance a machine component or reduce the effort required to hold it in position.\n\nThe distinction between a lever arm and the physical lever is important. In elementary language, an “arm” sometimes means the length of bar between a pivot and an applied force. In mechanics, the moment arm is specifically the perpendicular distance from the axis to the force’s line of action. These distances are identical only for particular force directions. A long handle therefore provides little turning effect if it is pushed almost directly toward its pivot."
    },
    {
      "heading": "Moments, equilibrium, and support reactions",
      "text": "The turning effect of a force is its torque, also called its moment. For a force applied at position vector \\(\\mathbf r\\) relative to a pivot, the torque is\n\n\\[\\boldsymbol{\\tau}=\\mathbf r\\times\\mathbf F.\\]\n\nIts magnitude is \\(rF\\sin\\theta\\), where \\(\\theta\\) is the angle between the position vector and the force. Equivalently, it is \\(Fd\\), where \\(d\\) is the perpendicular moment arm. Torque is measured in newton-metres in the International System of Units. Although this has the same dimensions as the joule, torque and energy represent different physical quantities.\n\nFor a stationary lever, both the net force and the net torque must vanish:\n\n\\[\\sum\\mathbf F=0, \\qquad \\sum\\boldsymbol{\\tau}=0.\\]\n\nIn a plane, moments about the pivot can be assigned positive and negative signs according to their direction. For two opposing forces acting on an ideal lever, the resulting balance condition is\n\n\\[F_{\\mathrm e}d_{\\mathrm e}=F_{\\mathrm l}d_{\\mathrm l},\\]\n\nwhere the subscripts denote effort and load. This is the law of the lever. A force applied through the pivot has no moment about that pivot, so the support reaction disappears from this particular moment equation. It nevertheless remains essential to the force balance.\n\nFor example, suppose a horizontal, weightless bar has a downward load of \\(600\\ \\mathrm N\\) located \\(0.20\\ \\mathrm m\\) to one side of a pivot. A downward effort applied \\(0.80\\ \\mathrm m\\) on the other side balances it when\n\n\\[F_{\\mathrm e}=\\frac{600\\times0.20}{0.80}=150\\ \\mathrm N.\\]\n\nThe upward reaction at the pivot is then \\(750\\ \\mathrm N\\), because it must balance both downward forces. Thus a device that reduces the operator’s required force can still impose a substantial force on its support.\n\nA lever’s own weight modifies the equation. If its weight is \\(W\\) and its center of mass has a signed horizontal offset \\(x_{\\mathrm c}\\) from the pivot, its gravitational moment must be included along with the effort and load moments. The weight may assist the effort or oppose it, depending on the geometry. This is why a heavy crowbar, an unbalanced beam, and a counterweighted lifting arm cannot always be analyzed accurately as massless levers.\n\nA free-body diagram makes these relationships explicit by separating the lever from its surroundings and showing every external force. An ordinary pin can exert reaction forces but, in an ideal planar model, does not supply a resisting couple. A clamped support can supply such a couple, and therefore behaves differently. The familiar two-force moment balance is valid only when other moments are absent or have been accounted for."
    },
    {
      "heading": "The three conventional classes",
      "text": "Levers are conventionally divided into three classes according to the order of the fulcrum, effort, and load. This classification describes their arrangement, not their material or shape. It is most transparent for a straight member with approximately parallel effort and load forces. More elaborate mechanisms can still be classified locally, but their changing geometry is often better described directly through moment arms.\n\nIn a first-class lever, the fulcrum lies between the effort and the load. A seesaw is the standard example. In the usual arrangement, downward movement of one end causes upward movement of the other. The ideal force advantage may be greater than, equal to, or less than one, depending on the relative moment arms. An equal-arm balance has a ratio of one; a crowbar with a short load arm and a long effort arm provides force multiplication. Scissors comprise two first-class levers sharing a pivot, with the handles receiving effort and the blades applying force to the material.\n\nIn a second-class lever, the load lies between the fulcrum and the effort. A wheelbarrow approximates this arrangement: the wheel axle serves as the pivot, the load acts between the axle and the handles, and the operator lifts at the handles. Strictly, the wheel and ground contact add features beyond the elementary stationary lever model, but the moment balance about the axle explains the handle force. A hinged nutcracker is another example, with the nut between the hinge and the hand force. For the standard straight arrangement with parallel forces, the effort arm is longer than the load arm, giving force multiplication.\n\nIn a third-class lever, the effort lies between the fulcrum and the load. Simple tweezers illustrate this arrangement when each limb is treated as a lever supported near its joined end. The effort arm is shorter than the load arm, so the effort exceeds the output force in the ideal model. The corresponding benefit is a greater output displacement and speed. A forearm lifted by the biceps is another familiar example, although anatomical moment arms vary with joint angle.\n\nThe classification does not by itself specify the actual mechanical advantage of every bent or obliquely loaded device. A force applied near the end of a member may have a small moment arm if its direction passes close to the pivot. Likewise, the point where a tool contacts its load may move as it operates. The class identifies a useful geometric pattern; calculation still requires the actual force directions.\n\nNor does “third class” imply mechanical inferiority. A mechanism may be designed primarily for reach, speed, sensitivity, or movement range rather than maximum force. A long fishing rod, for example, is useful partly because modest motion near the hand can produce a much larger displacement at the tip, although its flexibility prevents it from behaving as a perfectly rigid lever."
    },
    {
      "heading": "Mechanical advantage, displacement, and work",
      "text": "The mechanical advantage of a lever is commonly defined as the ratio of output force to input force:\n\n\\[\\mathrm{MA}=\\frac{F_{\\mathrm{out}}}{F_{\\mathrm{in}}}.\\]\n\nFor an ideal lever in equilibrium, this equals the ratio of the input moment arm to the output moment arm. A four-to-one moment-arm ratio can therefore produce an output force four times as large as the effort. This force multiplication is accompanied by a displacement trade-off, not by an increase in available energy.\n\nFor a small angular rotation \\(d\\theta\\), a point at radius \\(r\\) moves through an arc \\(ds=r\\,d\\theta\\). If both forces remain tangential to their respective circular paths, the input and output displacement ratio is \\(r_{\\mathrm{in}}/r_{\\mathrm{out}}\\). More generally, the relevant displacement is the component along the force direction. Its magnitude is related to the perpendicular moment arm by\n\n\\[|dq|=d_{\\perp}|d\\theta|.\\]\n\nConsequently, in an ideal, quasistatic transmission, the ratio of output force to input force equals the corresponding ratio of input displacement to output displacement.\n\nThis relationship follows from work. For small movements with no losses or change in stored energy,\n\n\\[F_{\\mathrm{in}}\\,dq_{\\mathrm{in}} = F_{\\mathrm{out}}\\,dq_{\\mathrm{out}},\\]\n\nwhere the quantities are expressed as positive input and useful output magnitudes. A lever that permits a person to raise a heavy load with a small force requires the effort point to travel farther than the load. Conversely, a lever that produces a large output movement requires a greater input force. This is one practical expression of the conservation of energy.\n\nIn a numerical example, a lever with input and output radii of \\(1.0\\ \\mathrm m\\) and \\(0.10\\ \\mathrm m\\) has an ideal force ratio of ten when both forces act tangentially. A \\(100\\ \\mathrm N\\) effort can balance a \\(1{,}000\\ \\mathrm N\\) load. During a rotation of \\(0.10\\) radians, the corresponding arc lengths are \\(0.10\\ \\mathrm m\\) and \\(0.010\\ \\mathrm m\\). The work magnitudes are both \\(10\\ \\mathrm J\\). If force directions are fixed rather than tangential, the projected displacements and changing moment arms must be used instead.\n\nFor finite movements, these local relationships may vary throughout the stroke. The appropriate work expression is then an integral, \\(W=\\int\\mathbf F\\cdot d\\mathbf r\\), rather than a single force multiplied by an arbitrary path length. The principle of virtual work extends the same reasoning to constrained mechanisms: in equilibrium, the sum of the work that external forces would do during a permitted infinitesimal displacement is zero. This approach is especially useful when several levers and links move together."
    },
    {
      "heading": "Real levers: friction, deformation, and dynamics",
      "text": "Real levers depart from the ideal model through friction, elastic deformation, moving mass, and imperfections in their supports. Pivot friction introduces a resisting moment. When a lever moves slowly against this resistance, the applied moment must balance both the load moment and the frictional moment. At rest, static friction can sustain a range of opposing moments, so a lever may remain stationary even when the ideal moments do not balance exactly.\n\nIn a sliding bearing, friction depends on contact forces, materials, surface condition, and lubrication. Rolling-element bearings reduce many sliding losses but do not eliminate resistance. Knife-edge supports, historically important in precision balances, reduce the effective contact region and allow small angular movements, though their performance depends on contact deformation, cleanliness, and wear. Flexure pivots avoid ordinary sliding friction but introduce an elastic restoring torque and permit only a limited angular range.\n\nThe lever member itself bends under load. Its shape change depends on material stiffness, cross-sectional geometry, support conditions, and the distribution of forces. For a slender beam in a suitable small-deflection regime, curvature is related to bending moment through the product \\(EI\\), where \\(E\\) is Young’s modulus and \\(I\\) is the second moment of area. A deeper cross-section can greatly increase resistance to bending without a proportional increase in mass. Excessive loading may produce permanent deformation, cracking, or failure rather than useful lever action.\n\nWhen motion is rapid, equilibrium equations must be replaced by dynamical equations. For planar rotation about a fixed axis,\n\n\\[\\sum\\tau=I_{\\mathrm p}\\alpha,\\]\n\nwhere \\(I_{\\mathrm p}\\) is the moment of inertia about that axis and \\(\\alpha\\) is angular acceleration. Part of the effort then accelerates the lever and any attached components instead of balancing the external load. A long, heavy handle can provide favorable static leverage while requiring appreciable torque to start and stop. Its rotational kinetic energy also matters when it strikes a stop or transfers an impact.\n\nEfficiency is the useful output work divided by input work over a specified operation:\n\n\\[\\eta=\\frac{W_{\\mathrm{out}}}{W_{\\mathrm{in}}}.\\]\n\nUnder quasistatic conditions with comparable initial and final stored energy, friction and other dissipative processes make this ratio less than one. Elastic strain energy can be temporarily stored and returned, so not every difference between input and output work is immediately a loss. Similarly, a moving lever may briefly deliver more output power than its current input power by releasing previously stored kinetic or elastic energy. These effects do not violate energy conservation; they require the full energy balance to be considered."
    },
    {
      "heading": "Compound levers and linked mechanisms",
      "text": "A compound lever uses two or more connected levers so that the output of one drives another. In an ideal arrangement, the individual force ratios can multiply. If one stage provides a ratio of four and a second provides a ratio of five, the combined force ratio can be twenty. The total displacement trade-off also multiplies: a large input movement produces a much smaller final output movement.\n\nThis multiplication is exact only under the assumptions used to define each stage. Link directions, pivot positions, changing contact points, and friction can make the ratio vary during motion. An intermediate link typically transmits force along its own axis if it acts as an ideal two-force member. The receiving lever’s moment arm must therefore be measured perpendicular to that direction, not simply from its pivot to the attachment point. A diagram showing only bar lengths can conceal major changes in actual force transmission.\n\nBolt cutters illustrate the practical use of compound leverage. Their long handles and additional joints allow relatively modest hand forces to generate large forces at short cutting edges. The final blade motion is small compared with handle motion, and stresses at pins and jaws can be high. Nail clippers likewise combine interacting lever elements, though their precise mechanical advantage depends on the geometry and contact positions of the particular design.\n\nA bell crank is a bent lever, often arranged with arms near a right angle, that redirects motion between differently oriented links. Such components have been used in control linkages, machinery, and vehicle systems. A bell crank does not inherently multiply force: its ratio depends on its effective moment arms. A four-bar linkage combines rotating and connecting members into a closed chain, allowing designers to obtain particular paths, angular relationships, or changing transmission ratios.\n\nToggle mechanisms provide a more extreme example of geometry-dependent leverage. As two linked members approach a straight-line configuration, certain arrangements develop a very large ideal force ratio. Near this position, a substantial input movement may correspond to an extremely small output displacement. The apparent divergence in force predicted by a perfectly rigid, frictionless model is limited in practice by material deformation, joint clearances, friction, and structural strength.\n\nA toggle can also pass slightly beyond its straight configuration and bear against a stop, creating an over-center arrangement used in clamps and latches. This is not simply a high-ratio ordinary lever: its retention depends on the direction of the load, linkage geometry, and stop position. Analysis may require both equilibrium and stability, because a mechanism can satisfy a force-balance equation yet move away from that configuration under a small disturbance."
    },
    {
      "heading": "Tools, weighing instruments, and control devices",
      "text": "Hand tools demonstrate how leverage is adapted to different tasks. A crowbar sacrifices load movement to reduce effort, whereas long-handled shears combine handle leverage with cutting-edge geometry. In scissors, the material being cut usually contacts the blades at a position that changes during the stroke. Cutting near the pivot generally permits greater force at the contact than cutting near the tips, although the required force also depends on blade sharpness, material properties, and the mechanics of fracture.\n\nA wrench applies torque to a fastener through its handle. If a force \\(F\\) acts at a perpendicular distance \\(L\\) from the fastener axis, the applied torque is \\(FL\\). A force that is not perpendicular to the handle produces a smaller torque for the same magnitude. A torque wrench adds a calibrated means of indicating or limiting this turning effect. The resulting torque is not identical to the clamping force in a bolted joint, because thread friction, under-head friction, geometry, and material behavior affect that relationship.\n\nThe beam balance uses lever equilibrium to compare masses. With equal arms in a sufficiently uniform gravitational field, equal opposing masses produce equal gravitational moments. The local gravitational acceleration cancels from the comparison. An unequal-arm balance can compare a larger load with a smaller counterweight, while a steelyard uses a counterweight that moves along a graduated arm. In each case, the instrument’s own weight distribution and any unequal arm lengths must be included in its calibration.\n\nSensitivity is not determined by force ratio alone. In a beam balance, the position of the combined center of mass relative to the pivot influences the restoring torque after a small tilt. A center of mass below the support gives stable equilibrium; changing its distance from the pivot changes the restoring tendency. Bearings, air currents, thermal expansion, and damping also affect performance. Precision weighing therefore links lever mechanics with metrology, calibration, and measurement uncertainty.\n\nLevers also transmit control movements. A brake pedal converts foot force into force on a cable, linkage, or hydraulic piston. The pedal ratio is determined by the relevant perpendicular moment arms and may change as the pedal moves. Hydraulic pressure and piston-area ratios can then provide additional force transformation, distinct from the lever itself. Mechanical advantage at one stage does not describe the entire braking system.\n\nSmall levers can instead amplify motion for observation or control. Mechanical indicators and measuring instruments may use a short input arm and a longer output arm to make a small displacement more visible. The cost is reduced output force and increased sensitivity to joint clearance, friction, and compliance. Thus the same basic principle serves both heavy-force tools and delicate instruments, with different design priorities."
    },
    {
      "heading": "Biological lever systems",
      "text": "In biomechanics, bones and other relatively stiff structures act as lever members, joints provide rotational constraints, and muscles or external forces supply moments. This model helps explain posture, locomotion, feeding, and manipulation. It is an approximation: biological joints are not perfect pins, tissues deform, muscles have distributed attachments, and the effective rotation axis can shift during movement.\n\nThe elbow provides a familiar third-class arrangement when the biceps flexes the forearm against a load in the hand. The elbow is the approximate pivot, the muscle acts relatively close to it, and the hand load acts farther away. If a hand load produces a moment of \\(12\\ \\mathrm{N\\,m}\\) and the effective muscle moment arm is \\(0.04\\ \\mathrm m\\), a muscle force of \\(300\\ \\mathrm N\\) is needed to balance that load moment alone. The forearm’s weight and forces from other muscles would also have to be included in a fuller calculation.\n\nLarge internal forces are therefore compatible with modest external loads. The joint reaction is determined by the vector balance of muscle forces, weight, contact forces, and acceleration. Antagonistic muscles may be active simultaneously, increasing joint loading while controlling stiffness and stability. External lever geometry alone cannot determine every internal force, because several muscles may contribute to the same net moment.\n\nA muscle’s anatomical attachment distance is not necessarily its moment arm. The relevant quantity is the perpendicular distance from the joint axis to the muscle–tendon line of action. Tendons may wrap around bones or pass through guiding structures, causing this line to change with joint angle. The patella, for example, helps position the knee extensor mechanism so that it has an effective moment arm. Anatomical leverage is therefore a function of posture rather than a single permanent ratio.\n\nLevers in living systems also trade force against movement and speed. For a simplified rotating segment, a muscle acting through a small moment arm must exert greater force for a given joint torque, but a given tendon excursion can correspond to a larger angular movement. Distal points on a long limb then move farther and faster than points close to the joint. Actual performance also depends on muscle force–velocity behavior, tendon elasticity, neural control, and the segment’s rotational inertia.\n\nDifferent tasks produce different biological arrangements. The ankle during a simplified heel-raising movement can be modeled as a second-class lever, with support near the forefoot, body loading acting through the ankle region, and the Achilles tendon applying effort at the heel. Jaw systems use muscle and tooth moment arms to distribute bite forces at different positions. Such examples show why classification is useful, but they also illustrate the need to specify which body is isolated, which contacts act on it, and whether the movement is treated as static or dynamic."
    },
    {
      "heading": "Historical development and theoretical significance",
      "text": "Levers were used long before a written mathematical theory of their operation survives. Their basic action is accessible through ordinary handling of poles, branches, and rigid tools, making a single identifiable invention unlikely. Ancient lifting, transport, and water-raising practices included devices that exploited the same relationship between force and distance. The shaduf, consisting of a pivoted pole with a bucket at one end and a counterweight at the other, is an enduring example associated with ancient irrigation.\n\nThe earliest surviving systematic discussions belong to the intellectual setting of ancient Greece. The Mechanical Problems, traditionally transmitted among the works of Aristotle but generally treated as a work of uncertain authorship from his school or intellectual environment, considers how small forces can move large weights. Its treatment relates mechanical effects to circular motion and unequal distances from a center. This was an explanatory tradition different from the later axiomatic presentation of equilibrium.\n\nArchimedes, who lived approximately from 287 to 212 BCE, gave the lever a central place in mathematical mechanics. In On the Equilibrium of Planes, he developed propositions concerning the equilibrium of magnitudes and their centers of gravity. The work connects unequal weights with inversely proportional distances from a support. Its significance lies not merely in identifying a practical rule, but in presenting balance and centers of gravity as subjects for deductive mathematical treatment.\n\nThe famous statement that a sufficiently long lever and a place to stand would allow the Earth to be moved is associated with Archimedes through later accounts. It expresses the unlimited force ratio of an idealized model, not a feasible engineering project. A physical device would require material strength, a support capable of bearing the reactions, and an enormous effort displacement. The anecdote is therefore best understood as an illustration of the mathematical principle rather than evidence of a proposed machine.\n\nMedieval scholars further developed the mathematical study of weights and equilibrium. Works associated with Jordanus de Nemore in the thirteenth century examined balances and the effective action of weights in different configurations. Renaissance mechanics then brought inherited theory into closer contact with machines, instruments, and engineering practice. Galileo Galilei emphasized the relation between force advantage and displacement in his discussions of mechanics, helping clarify why a machine does not remove the amount of work required merely by reducing the applied force.\n\nWith Isaac Newton’s Principia of 1687 and the subsequent development of analytical mechanics, the lever became a special case of general laws governing forces, moments, and motion. Later formulations using virtual work and generalized coordinates made it possible to treat linked mechanisms without analyzing every support reaction individually. The elementary lever remains important in mechanics education because it exposes distinctions that recur in more advanced systems: force versus torque, equilibrium versus stability, force multiplication versus energy gain, and ideal geometry versus the behavior of real materials."
    }
  ],
  "links": [
    "simple-machine",
    "classical-mechanics",
    "energy",
    "force",
    "rigid-body",
    "mass",
    "center-of-mass",
    "torque",
    "international-system-of-units",
    "free-body-diagram",
    "work-physics",
    "first-law-of-thermodynamics",
    "friction",
    "moment-of-inertia",
    "kinetic-energy",
    "metrology",
    "calibration",
    "measurement-uncertainty",
    "ancient-greece",
    "aristotle",
    "archimedes",
    "galileo-galilei",
    "isaac-newton"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}