{
  "id": "leap-second",
  "title": "Leap Second",
  "lang": "en",
  "source_lang": "en",
  "summary": "A leap second is a one-second adjustment to Coordinated Universal Time that keeps civil time closely aligned with Earth’s irregular rotation.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Intercalary second"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/leap-second/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/leap-second/",
      "json": "https://aiwiki.page/zh/leap-second.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A leap second is a one-second adjustment made to Coordinated Universal Time (UTC) to keep it close to time determined by Earth’s rotation. Atomic clocks provide a highly uniform measure of elapsed time, whereas Earth’s rotation varies irregularly. Under the system introduced in 1972, leap seconds keep the difference between UTC and the rotation-based time scale UT1 within 0.9 seconds. A positive leap second adds a second to UTC; a negative leap second would remove one."
    },
    {
      "heading": "Atomic time and rotational time",
      "text": "Historically, timekeeping depended on astronomical observations, particularly Earth’s rotation relative to the Sun and distant celestial objects. The mean solar day supplied the basis for dividing a day into 24 hours, each containing 60 minutes of 60 seconds.\n\nModern timekeeping instead uses atomic clocks. In the International System of Units (SI), the second is defined by fixing the frequency of a specified transition in the caesium-133 atom at exactly 9,192,631,770 hertz. This definition provides a reproducible unit independent of variations in the length of the day.\n\nTwo time scales are central to leap seconds:\n\n- International Atomic Time (TAI) is a continuous atomic time scale calculated by the International Bureau of Weights and Measures from measurements made by clocks around the world. It does not contain leap seconds.\n- UT1 describes Earth’s rotation angle in the form of a time scale. It is determined from astronomical and geodetic observations.\n\nUTC uses seconds of the same duration as TAI but differs from TAI by an integer number of seconds. Leap seconds change that integer offset so that UTC remains approximately aligned with UT1.\n\nThe rotational difference is commonly expressed as\n\n\\[DUT1 = UT1 - UTC.\\]\n\nUnder the leap-second system established in 1972, adjustments are arranged to maintain\n\n\\[|UT1-UTC| < 0.9\\ \\mathrm{s}.\\]\n\nA leap second therefore changes the numbering of UTC seconds, not the physical duration of the SI second."
    },
    {
      "heading": "Why Earth’s rotation requires adjustments",
      "text": "Earth is not a perfectly rigid, uniformly rotating body. Its rotation changes as angular momentum is exchanged among the solid Earth, the atmosphere, and the oceans. Changes in winds, ocean circulation, and the distribution of water and ice can alter the length of the day.\n\nOver long periods, tidal interactions, principally involving the Moon, tend to slow Earth’s rotation. Shorter-term variations can either lengthen or shorten the day, however, and cannot be represented adequately by a single steady rate.\n\nEven a small difference between the actual day and 86,400 SI seconds accumulates. If the rotational day were consistently one millisecond longer than 86,400 SI seconds, the resulting discrepancy would grow by about one second in 1,000 days. Actual rotational variations are less regular, so leap seconds are not scheduled at fixed intervals.\n\nAn individual short day does not by itself require a negative leap second. The need for an adjustment depends on the accumulated difference between UTC and UT1 and on predictions of its future evolution."
    },
    {
      "heading": "How a leap second is implemented",
      "text": "Positive leap seconds\n\nA positive leap second introduces an additional UTC second at the end of a designated month. The sequence is\n\n23:59:58\n23:59:59\n23:59:60\n00:00:00\n\nThe timestamp 23:59:60 belongs to the day that is ending. That UTC day contains 86,401 SI seconds rather than the usual 86,400.\n\nFor example, a leap second was inserted at the end of 31 December 2016. The additional second was labelled 2016-12-31 23:59:60 UTC, immediately before 2017-01-01 00:00:00 UTC.\n\nAll locations experience the adjustment at the same instant. In local civil time, it may therefore occur during the morning or afternoon rather than near midnight.\n\nNegative leap seconds\n\nA negative leap second would omit the final second of a designated UTC day:\n\n23:59:58\n00:00:00\n\nSuch a day would contain 86,399 SI seconds. No negative leap second was used during the sequence of adjustments from 1972 through 2016; all 27 adjustments in that period were positive.\n\nA positive leap second increases the difference \\(TAI-UTC\\) by one second. A negative leap second would decrease it by one second.\n\nScheduling and announcements\n\nThe International Earth Rotation and Reference Systems Service (IERS) monitors Earth’s rotation and announces leap-second decisions through its Bulletin C.\n\nThe established rules allow insertion or deletion at the end of a UTC month, with the ends of June and December preferred. Every leap second introduced from 1972 through 2016 occurred at one of those two dates.\n\nBecause Earth’s future rotation cannot be predicted precisely far in advance, there is no permanent leap-second calendar comparable to the calendar rule for leap years."
    },
    {
      "heading": "Historical development",
      "text": "Before atomic timekeeping, rotational irregularities were difficult to distinguish from imperfections in clocks. Increasingly accurate clocks and astronomical observations revealed that Earth’s rotation was not uniform enough to serve as the basis of a precisely reproducible unit.\n\nThe early forms of UTC, developed before 1972, used small time steps and adjustments to the rate of broadcast time signals. Those arrangements kept time signals close to rotational time but complicated the relationship between broadcast seconds and atomic seconds.\n\nThe modern system began on 1 January 1972. UTC was assigned an initial offset of 10 seconds behind TAI, and subsequent adjustments were made in whole seconds without changing the rate of the time scale. The first leap second was inserted on 30 June 1972.\n\nBetween June 1972 and December 2016, 27 positive leap seconds were introduced. Consequently, at the beginning of 2017,\n\n\\[TAI-UTC = 37\\ \\mathrm{s}.\\]\n\nThe initial 10-second offset was part of the establishment of the system, not ten leap seconds inserted on that date.\n\nLeap seconds are unrelated to leap days in the Gregorian calendar. Leap days keep calendar years approximately aligned with Earth’s orbital period; leap seconds reconcile atomic timekeeping with Earth’s rotation."
    },
    {
      "heading": "Effects on computing and navigation",
      "text": "Leap seconds create exceptional cases for systems that assume every day contains exactly 86,400 seconds. Their effects depend on the time representation and the way a clock is synchronized.\n\nTimestamps and elapsed time\n\nMany computer interfaces do not represent 23:59:60 directly. Common Unix or POSIX-style time representations treat calendar days as having 86,400 seconds and do not provide an ordinary, distinct timestamp for every leap second. Implementations may repeat a timestamp, step a clock, or handle the adjustment through other conventions.\n\nConsequences can include ambiguous event ordering, incorrect duration calculations, or disagreement between systems using different conventions. A time label alone may therefore be insufficient for precise interpretation unless its time scale and leap-second handling are known.\n\nCivil-time clocks and elapsed-time clocks serve different purposes. An operating system may provide a clock that follows UTC for calendar timestamps and a separate monotonic clock for measuring intervals without backward jumps.\n\nTime distribution and leap smearing\n\nThe Network Time Protocol includes indicators that can announce an impending leap second. Correct handling still depends on the server, client, operating system, and application.\n\nSome services use leap smearing: instead of making a one-second adjustment at a single instant, they gradually vary the rate of their distributed clock over a longer interval. This avoids a sudden step but causes the displayed time to differ temporarily from strict UTC.\n\nDifferent smear schedules can disagree with one another. A smeared timestamp and a conventional UTC timestamp therefore cannot always be treated as interchangeable.\n\nSatellite navigation\n\nSatellite-navigation systems may use continuous internal time scales rather than inserting UTC leap seconds. GPS time, for example, began with an epoch in January 1980 and does not introduce leap seconds. Navigation messages provide information that receivers can use to derive UTC.\n\nA changing difference between a navigation time scale and UTC does not indicate that the underlying clocks have become inaccurate; it reflects different definitions of the time scales."
    },
    {
      "heading": "Reform of UTC",
      "text": "Leap seconds preserve a close relationship between civil time and Earth’s orientation, but their irregular scheduling and implementation complexity have prompted decades of discussion within metrology, telecommunications, navigation, and computing.\n\nIn 2022, the General Conference on Weights and Measures adopted a resolution to increase the permitted maximum difference between UT1 and UTC by or before 2035. The intended change would allow UTC to operate without frequent one-second adjustments for at least a century. The resolution did not itself specify a complete replacement adjustment scheme or immediately terminate leap seconds.\n\nThe central issue is the relationship between continuity and astronomical alignment. A more continuous UTC simplifies many technical systems, while allowing its difference from Earth-rotation time to grow. Precise astronomy and geodesy would still require observations and published values of Earth’s rotation, whether or not civil time continues to be adjusted by leap seconds."
    }
  ],
  "links": [
    "second",
    "coordinated-universal-time",
    "earth",
    "sun",
    "atomic-clock",
    "international-system-of-units",
    "international-atomic-time",
    "angular-momentum",
    "atmosphere-of-earth",
    "ocean",
    "tide",
    "moon",
    "gregorian-calendar",
    "operating-system",
    "global-positioning-system",
    "metrology",
    "general-conference-on-weights-and-measures",
    "astronomy"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}