{
  "id": "lapse-rate",
  "title": "Lapse Rate",
  "lang": "en",
  "source_lang": "en",
  "summary": "The lapse rate describes how atmospheric temperature changes with height and helps determine atmospheric stability, cloud formation, and convection.",
  "category": "science",
  "subcategory": "earth-science",
  "type": "concept",
  "aliases": [
    "Temperature lapse rate",
    "atmospheric lapse rate",
    "vertical temperature lapse rate"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/lapse-rate/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/lapse-rate/",
      "json": "https://aiwiki.page/zh/lapse-rate.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The lapse rate is the rate at which temperature decreases with increasing altitude in an atmosphere. In meteorology, it describes either the observed vertical temperature profile of the surrounding air or the temperature change of an air parcel moving vertically under specified conditions. Comparing these rates is fundamental to understanding atmospheric stability, cloud development, and vertical air motion. A positive lapse rate conventionally means cooling with height; a negative lapse rate means warming with height."
    },
    {
      "heading": "Definition and sign convention",
      "text": "For temperature \\(T\\) and upward vertical coordinate \\(z\\), the lapse rate is defined as\n\n\\[\\Gamma=-\\frac{dT}{dz}.\\]\n\nFor an environmental temperature field that also varies horizontally and with time, the derivative is taken vertically at a fixed horizontal position and time.\n\nLapse rates are commonly expressed in kelvins per kilometre, \\(\\mathrm{K\\,km^{-1}}\\), or degrees Celsius per kilometre. The numerical values are identical because a temperature difference of one kelvin equals a difference of one degree Celsius.\n\nThe sign convention gives three basic cases:\n\n- Positive lapse rate: temperature decreases with height.\n- Zero lapse rate: temperature is constant with height, forming an isothermal layer.\n- Negative lapse rate: temperature increases with height, forming a temperature inversion.\n\nFor a finite layer between heights \\(z_1\\) and \\(z_2\\), the mean lapse rate is\n\n\\[\\overline{\\Gamma} = \\frac{T(z_1)-T(z_2)}{z_2-z_1}.\\]\n\nA layer average can conceal important internal structure. A generally cooling atmospheric column may contain a shallow inversion that strongly restricts vertical mixing."
    },
    {
      "heading": "Environmental lapse rate",
      "text": "The environmental lapse rate is the actual vertical rate of temperature decrease in the surrounding atmosphere at a particular place and time. It is a measured property, not a universal constant.\n\nIn the troposphere, the lowest major layer of the Earth’s atmosphere, temperature generally decreases with altitude. The profile results from interacting processes: absorption and emission of radiation, exchanges of heat with the surface, atmospheric circulation, vertical mixing, and the release or absorption of energy during changes of water phase.\n\nThe environmental lapse rate varies with weather, season, location, and height. Strong surface heating can produce a steep temperature decrease in the lowest air layers. Nighttime surface cooling can instead produce an inversion. Warming with height also characterizes much of the stratosphere, where absorption of solar radiation by ozone is important.\n\nAn often-quoted value of \\(6.5\\ \\mathrm{K\\,km^{-1}}\\) is the prescribed tropospheric lapse rate in the International Standard Atmosphere, extending to a geopotential altitude of 11 kilometres. It is a useful reference profile, not a rule describing every observed atmosphere or an adiabatically rising parcel."
    },
    {
      "heading": "Adiabatic lapse rates",
      "text": "An adiabatic lapse rate describes how an air parcel’s temperature changes as it moves vertically without exchanging heat with its surroundings. This idealization treats the parcel as approximately matching the surrounding pressure while limiting mixing across its boundary.\n\nAtmospheric pressure decreases with height. A rising parcel therefore expands and does work on its surroundings. In the absence of compensating heat input, its temperature falls. A descending parcel is compressed and warms. These changes follow the first law of thermodynamics.\n\nAdiabatic lapse rates are properties of an idealized parcel process; the environmental lapse rate describes the surrounding temperature profile. Confusing the two obscures the physical basis of atmospheric stability.\n\nDry adiabatic lapse rate\n\nFor an unsaturated parcel, with no condensation or evaporation and approximately constant composition, the dry adiabatic lapse rate is\n\n\\[\\Gamma_d=\\frac{g}{c_{pd}},\\]\n\nwhere \\(g\\) is gravitational acceleration and \\(c_{pd}\\) is the specific heat capacity of dry air at constant pressure. Near Earth’s surface,\n\n\\[\\Gamma_d\\approx9.8\\ \\mathrm{K\\,km^{-1}}.\\]\n\nHere, “dry” does not require the complete absence of water vapour. It usually means that the parcel is unsaturated and no water changes phase. Water vapour slightly modifies the parcel’s heat capacity, but the dry-air value is a useful approximation.\n\nThe result can be derived by combining an adiabatic process for an ideal gas with hydrostatic pressure balance:\n\n\\[c_{pd}\\,dT-\\frac{1}{\\rho}\\,dp=0, \\qquad \\frac{dp}{dz}=-\\rho g,\\]\n\nwhere \\(\\rho\\) is air density. Substitution gives \\(dT/dz=-g/c_{pd}\\). This derivation assumes that the parcel density is sufficiently close to the environmental density for the usual parcel approximation.\n\nSaturated adiabatic lapse rate\n\nWhen rising air becomes saturated, further cooling generally causes condensation. The associated release of latent heat offsets part of the expansion cooling. Consequently, the saturated adiabatic lapse rate, often called the moist adiabatic lapse rate, is normally smaller than the dry rate.\n\nUnlike the dry rate, it varies substantially with temperature, pressure, and the treatment of condensed water. Warm saturated air contains more water vapour and can release more latent heat during ascent, producing a smaller lapse rate. In very cold air, the saturated rate approaches the dry rate because little water vapour is available to condense. Values of roughly \\(4\\)–\\(7\\ \\mathrm{K\\,km^{-1}}\\) are common in many lower- and middle-tropospheric conditions, but they are not universal limits.\n\nA commonly used approximate expression is\n\n\\[\\Gamma_m\\approx g\\, \\frac{1+\\dfrac{L_v r_s}{R_dT}} {c_{pd}+\\dfrac{L_v^2r_s}{R_vT^2}},\\]\n\nwhere \\(L_v\\) is the latent heat of vaporization, \\(r_s\\) is the saturation mixing ratio of water vapour to dry air, and \\(R_d\\) and \\(R_v\\) are the specific gas constants for dry air and water vapour.\n\nMore complete treatments distinguish between:\n\n- Reversible saturated ascent, in which condensed water remains with the parcel and contributes to its mass and heat capacity.\n- Pseudoadiabatic ascent, in which condensate is assumed to fall out immediately. This is not a strictly closed adiabatic system because precipitation carries mass and energy away.\n\nFreezing, melting, and deposition further modify parcel temperature changes in clouds containing ice."
    },
    {
      "heading": "Lapse rate and atmospheric stability",
      "text": "Stability concerns whether a vertically displaced parcel tends to return toward its original level or continue moving away. At approximately equal pressure, a warmer parcel is usually less dense than its surroundings and experiences upward buoyancy.\n\nLet \\(\\Gamma_e\\) be the environmental lapse rate, \\(\\Gamma_d\\) the dry adiabatic rate, and \\(\\Gamma_m\\) the saturated adiabatic rate. Under the usual simplified parcel assumptions:\n\nEnvironmental lapse rate | Stability classification | Physical interpretation\n\\(\\Gamma_e<\\Gamma_m\\) | Absolutely stable | Both unsaturated and saturated rising parcels tend to become colder than their surroundings.\n\\(\\Gamma_m<\\Gamma_e<\\Gamma_d\\) | Conditionally unstable | Unsaturated parcels are stable, but saturated parcels may become buoyant.\n\\(\\Gamma_e>\\Gamma_d\\) | Absolutely unstable | Both unsaturated and saturated rising parcels tend to become warmer than their surroundings.\n\nEquality with the appropriate parcel lapse rate gives neutral stability for that idealized displacement. A lapse rate exceeding the dry adiabatic value is called superadiabatic. Such gradients often occur in shallow layers immediately above strongly heated ground and are rapidly reduced by convection and turbulence.\n\nConditional instability does not guarantee thunderstorms. Air may first need enough lifting to reach saturation and then overcome a stable layer. Moisture supply, mixing with surrounding air, precipitation loading, and the depth of the unstable region also matter. Accurate buoyancy calculations account for water vapour’s effect on density and for any suspended condensate, rather than comparing temperature alone.\n\nPotential temperature\n\nFor dry air, stability can also be expressed using potential temperature:\n\n\\[\\theta=T\\left(\\frac{p_0}{p}\\right)^{R_d/c_{pd}},\\]\n\nwhere \\(p_0\\) is a reference pressure, commonly 1,000 hectopascals. Potential temperature is conserved during an ideal dry adiabatic displacement.\n\nAn increase of \\(\\theta\\) with height indicates dry static stability; constant \\(\\theta\\) indicates dry neutrality; and a decrease indicates dry instability. A well-mixed, dry convective layer therefore has nearly uniform potential temperature even though its actual temperature decreases upward."
    },
    {
      "heading": "Observation and applications",
      "text": "Vertical temperature profiles are commonly obtained from radiosondes carried by weather balloons. Aircraft, remote-sensing instruments, and satellite retrievals provide additional information. Calculated lapse rates depend on vertical resolution: closely spaced observations can reveal thin inversions that disappear in a deep-layer average.\n\nImportant applications include:\n\n- Weather forecasting: assessing instability, cloud depth, convective potential, and layers that inhibit rising air.\n- Air-pollution meteorology: estimating how readily emissions can mix vertically; inversions frequently restrict dispersion.\n- Mountain meteorology: interpreting cooling during ascent and warming during descent, including processes associated with föhn and Chinook winds.\n- Aviation: characterizing atmospheric structure, turbulence environments, and departures from standard-atmosphere conditions.\n- Ecology and hydrology: estimating temperature differences across elevation where direct observations are sparse.\n\nTemperature differences between mountain weather stations are not necessarily the same as the free-atmosphere lapse rate. Slope exposure, vegetation, snow cover, local wind, and cold-air drainage can all alter near-surface temperatures."
    },
    {
      "heading": "Role in climate",
      "text": "The vertical temperature profile influences how the atmosphere emits infrared radiation to space. Changes in that profile therefore contribute to the response of the climate system to warming, a mechanism called lapse-rate feedback.\n\nIn the tropics, moist convection tends to connect surface temperatures with temperatures aloft. Because the saturated adiabatic lapse rate decreases as temperatures rise, tropical warming generally produces greater warming in the upper troposphere than near the surface. This pattern increases outgoing radiation relative to a case with vertically uniform warming, contributing a negative lapse-rate feedback.\n\nAt high latitudes, warming can be concentrated near the surface, producing a locally positive lapse-rate feedback. The global effect is generally negative, although its magnitude depends on the spatial pattern of warming. Lapse-rate and water-vapour feedbacks are physically linked and are often analysed together in studies of climate change.\n\nA single fixed lapse rate cannot represent these variations. Reliable interpretation requires distinguishing an observed environmental gradient, an idealized parcel trajectory, a standard reference atmosphere, and a statistical relationship between surface temperature and elevation."
    }
  ],
  "links": [
    "temperature",
    "kelvin",
    "troposphere",
    "atmosphere-of-earth",
    "heat",
    "ozone",
    "pressure",
    "work-physics",
    "first-law-of-thermodynamics",
    "heat-capacity",
    "adiabatic-process",
    "ideal-gas",
    "density",
    "condensation",
    "latent-heat",
    "convection",
    "turbulence",
    "climate-change"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}