{
  "id": "joule-thomson-effect",
  "title": "Joule–Thomson Effect",
  "lang": "en",
  "source_lang": "en",
  "summary": "The Joule–Thomson effect is the temperature change of a real fluid during approximately constant-enthalpy flow through a restriction, underpinning many gas-liquefaction and refrigeration processes.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Joule–Kelvin effect",
    "Joule–Thomson throttling effect"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/joule-thomson-effect/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/joule-thomson-effect/",
      "json": "https://aiwiki.page/zh/joule-thomson-effect.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The Joule–Thomson effect is the change in temperature of a real fluid when it flows from higher to lower pressure through a valve, porous plug, or other restriction under conditions that keep its enthalpy approximately constant. Depending on the fluid and its initial state, throttling can produce cooling, heating, or no temperature change. The effect is important in thermodynamics, gas processing, refrigeration, and gas liquefaction. It is named after James Prescott Joule and William Thomson, later Lord Kelvin, who investigated it in the early 1850s."
    },
    {
      "heading": "Physical process and energy balance",
      "text": "A typical Joule–Thomson experiment maintains a steady flow through a porous plug in a thermally insulated tube. The plug sustains a pressure difference between the upstream and downstream regions, where temperatures are measured away from the strongly disturbed flow inside the restriction.\n\nThe process is approximately an adiabatic process: little heat crosses the apparatus boundary. It also delivers no shaft work. Applying the first law of thermodynamics to a steady-flow control volume gives\n\n\\[h_1+\\frac{u_1^2}{2}+gz_1 = h_2+\\frac{u_2^2}{2}+gz_2,\\]\n\nwhere \\(h\\) is specific enthalpy, \\(u\\) is flow speed, \\(g\\) is gravitational acceleration, and \\(z\\) is elevation. If the changes in bulk kinetic energy and gravitational potential energy between the measurement locations are negligible,\n\n\\[h_1=h_2.\\]\n\nThus, throttling is approximately isenthalpic. This does not mean that the fluid undergoes a reversible sequence of equilibrium states inside the restriction. The flow there is dissipative and nonuniform; the constant-enthalpy description relates the equilibrium states upstream and downstream.\n\nEnthalpy includes internal energy and the pressure–volume contribution associated with pushing fluid into and out of the control volume:\n\n\\[h=e+pv,\\]\n\nwhere \\(e\\) is specific internal energy and \\(v\\) is specific volume. Consequently, negligible heat transfer and zero shaft work do not imply that the internal energy remains constant."
    },
    {
      "heading": "Joule–Thomson coefficient",
      "text": "The local magnitude and direction of the effect are described by the Joule–Thomson coefficient,\n\n\\[\\mu_{\\mathrm{JT}} = \\left(\\frac{\\partial T}{\\partial p}\\right)_h.\\]\n\nIts SI unit is kelvin per pascal, although kelvin per bar is commonly used in engineering.\n\nFor a pressure decrease, \\(dp<0\\):\n\n- If \\(\\mu_{\\mathrm{JT}}>0\\), the fluid cools.\n- If \\(\\mu_{\\mathrm{JT}}<0\\), the fluid warms.\n- If \\(\\mu_{\\mathrm{JT}}=0\\), there is no first-order temperature change.\n\nFor a small pressure drop,\n\n\\[\\Delta T\\approx \\mu_{\\mathrm{JT}}\\Delta p.\\]\n\nFor a larger pressure drop, the coefficient generally changes along the constant-enthalpy path. The temperature difference must then be obtained from an appropriate equation of state or reliable property data, rather than by assuming one constant coefficient.\n\nThermodynamic expression\n\nFor a simple compressible fluid of fixed composition in a single phase, the differential of specific enthalpy can be written\n\n\\[dh = c_p\\,dT + \\left[ v-T\\left(\\frac{\\partial v}{\\partial T}\\right)_p \\right]dp,\\]\n\nwhere \\(c_p\\) is the specific heat capacity at constant pressure. Setting \\(dh=0\\) gives\n\n\\[\\mu_{\\mathrm{JT}} = \\frac{1}{c_p} \\left[ T\\left(\\frac{\\partial v}{\\partial T}\\right)_p-v \\right].\\]\n\nIntroducing the volumetric thermal expansion coefficient,\n\n\\[\\alpha = \\frac{1}{v} \\left(\\frac{\\partial v}{\\partial T}\\right)_p,\\]\n\nyields the equivalent form\n\n\\[\\mu_{\\mathrm{JT}} = \\frac{v}{c_p}(\\alpha T-1).\\]\n\nThe sign of the effect therefore depends on how the fluid’s volume changes with temperature at constant pressure.\n\nFor an ideal gas, \\(v=R_sT/p\\), where \\(R_s\\) is the specific gas constant. Hence \\(T(\\partial v/\\partial T)_p=v\\), so\n\n\\[\\mu_{\\mathrm{JT}}=0.\\]\n\nAn ideal gas does not change temperature during ideal throttling because its enthalpy depends only on temperature."
    },
    {
      "heading": "Molecular interpretation and inversion",
      "text": "The Joule–Thomson effect reflects departures from ideal-gas behavior, including intermolecular attractions and short-range repulsion. These interactions affect both internal energy and pressure–volume behavior.\n\nIn a simplified molecular picture, separating molecules against attractive interactions increases their intermolecular potential energy, which can be accompanied by a decrease in temperature. In other regimes, repulsive interactions and excluded-volume effects can favor warming. This picture is qualitative: the sign is determined by the full thermodynamic expression, not simply by whether the gas contains attractive forces.\n\nThe states satisfying\n\n\\[\\mu_{\\mathrm{JT}}=0\\]\n\nform an inversion curve in a pressure–temperature diagram. At these states,\n\n\\[T\\left(\\frac{\\partial v}{\\partial T}\\right)_p=v, \\qquad \\alpha T=1.\\]\n\nAn inversion temperature is therefore generally pressure-dependent, rather than one universal temperature assigned to each substance. An inversion curve may have upper and lower branches enclosing a region in which throttling produces cooling.\n\nAt ordinary room temperature and modest pressures, nitrogen, oxygen, and carbon dioxide commonly cool on throttling. Hydrogen and helium generally warm under comparable conditions and require precooling before Joule–Thomson expansion can provide cooling.\n\nVan der Waals approximation\n\nThe van der Waals equation provides a useful qualitative model:\n\n\\[p=\\frac{RT}{V_m-b}-\\frac{a}{V_m^2},\\]\n\nwhere \\(V_m\\) is molar volume, \\(R\\) is the molar gas constant, \\(a\\) represents attraction, and \\(b\\) represents excluded volume. In its low-pressure limit,\n\n\\[\\mu_{\\mathrm{JT}} \\approx \\frac{1}{C_{p,m}} \\left(\\frac{2a}{RT}-b\\right),\\]\n\nwhere \\(C_{p,m}\\) is the molar heat capacity at constant pressure. The corresponding limiting inversion temperature is\n\n\\[T_{\\mathrm{inv}}\\approx \\frac{2a}{Rb}.\\]\n\nThis illustrates the competition between attractions and excluded volume, but accurate engineering calculations require more precise equations of state, particularly near the critical point or a phase boundary."
    },
    {
      "heading": "Distinction from other expansion processes",
      "text": "Several processes involve decreasing pressure but obey different energy constraints.\n\nFree expansion. In Joule free expansion, gas expands into an evacuated space inside an isolated rigid vessel. No boundary work is done and no heat is exchanged, so the total internal energy remains constant. This is distinct from steady-flow throttling, where enthalpy remains constant.\n\nReversible adiabatic expansion. An ideal reversible adiabatic expansion is isentropic: entropy remains constant. A gas can perform work and cool even if it is ideal. In an expansion turbine, energy leaves as shaft work, so the outlet enthalpy is lower than the inlet enthalpy.\n\nNozzle expansion. A nozzle converts enthalpy into directed kinetic energy. Temperature can fall as flow speed increases. Where that kinetic-energy change is substantial, the nozzle process cannot be treated as constant-static-enthalpy throttling.\n\nThrottling is irreversible. For an adiabatic restriction carrying a single stream, entropy increases, consistent with the second law of thermodynamics. It therefore sacrifices the opportunity to extract useful work from the pressure difference."
    },
    {
      "heading": "Refrigeration and gas liquefaction",
      "text": "The effect is central to cryogenics, especially systems that use high-pressure gas, recuperative heat exchange, and an expansion valve.\n\nIn the Linde–Hampson liquefaction cycle, compressed gas is cooled and passed through a counterflow heat exchanger before being throttled. The cold low-pressure return stream cools the incoming high-pressure stream. This regenerative arrangement can progressively reduce the temperature until throttling produces a liquid fraction. Hydrogen and helium systems require suitable precooling because their room-temperature Joule–Thomson coefficients are negative.\n\nWhen throttling enters a two-phase region, the outlet temperature is constrained by the fluid’s phase equilibrium. Part of the fluid may vaporize or condense while total enthalpy remains approximately unchanged. The change in liquid or vapor fraction then becomes essential to the energy balance; a single-phase temperature coefficient alone is insufficient.\n\nExpansion valves in vapor-compression refrigerators also perform approximately isenthalpic throttling, usually converting high-pressure liquid refrigerant into a colder liquid–vapor mixture. Describing this only as “gas cooling” omits the important role of phase change.\n\nOther applications include compact cryogenic coolers, industrial gas separation, natural-gas processing, and predicting temperature changes across pressure-control valves. In gas pipelines, throttling-induced cooling can contribute to water condensation, ice formation, or gas-hydrate formation when composition and operating conditions permit."
    },
    {
      "heading": "Measurement and practical limitations",
      "text": "The coefficient can be measured by recording a small temperature change across a known pressure difference while minimizing heat leaks and correcting for changes in flow kinetic energy. Repeated measurements at different pressures and temperatures map the fluid’s behavior and test thermodynamic property models.\n\nSeveral limitations matter in practice:\n\n- Heat transfer: imperfect insulation can obscure the temperature change attributable to throttling.\n- Flow speed: large inlet-to-outlet velocity differences invalidate the approximation \\(h_1=h_2\\).\n- Composition: mixtures require composition-dependent properties; phase separation can change the compositions of the emerging liquid and vapor.\n- Phase boundaries: a pressure drop may create a two-phase outlet, requiring an enthalpy-based phase-equilibrium calculation.\n- Finite pressure drops: a positive inlet coefficient does not establish that the entire pressure reduction produces cooling, because the constant-enthalpy path can cross an inversion curve.\n\nA throttling valve does not generate refrigeration without an external energy input to the overall system. A complete refrigeration or liquefaction plant must restore the pressure difference, usually by compression, and reject heat elsewhere."
    }
  ],
  "links": [
    "temperature",
    "pressure",
    "enthalpy",
    "thermodynamics",
    "james-prescott-joule",
    "adiabatic-process",
    "heat",
    "first-law-of-thermodynamics",
    "kinetic-energy",
    "internal-energy",
    "equation-of-state",
    "heat-capacity",
    "ideal-gas",
    "nitrogen",
    "oxygen",
    "carbon-dioxide",
    "hydrogen",
    "gas-constant",
    "critical-point",
    "entropy",
    "work-physics",
    "second-law-of-thermodynamics",
    "cryogenics",
    "phase-transition"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}