{
  "id": "jansky",
  "title": "Jansky",
  "lang": "en",
  "source_lang": "en",
  "summary": "The jansky (Jy) is a non-SI unit of spectral flux density, equal to \\(10^{-26}\\) watts per square metre per hertz, widely used in astronomy.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/jansky/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/jansky/",
      "json": "https://aiwiki.page/zh/jansky.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The jansky, symbol Jy, is a unit of spectral flux density used in astronomy, especially radio astronomy and infrared astronomy. It measures the electromagnetic power received from a source per unit collecting area and per unit frequency interval. One jansky is defined exactly as\n\n\\[1\\ \\mathrm{Jy}=10^{-26}\\ \\mathrm{W\\,m^{-2}\\,Hz^{-1}}.\\]\n\nThe unit is named after Karl Jansky, whose observations established the existence of radio emission originating beyond the Solar System."
    },
    {
      "heading": "Definition and notation",
      "text": "The jansky is not a unit of the International System of Units (SI), but its value is defined by an exact conversion to SI units. In the centimetre–gram–second system,\n\n\\[1\\ \\mathrm{Jy} =10^{-23}\\ \\mathrm{erg\\,s^{-1}\\,cm^{-2}\\,Hz^{-1}}.\\]\n\nCommon multiples and submultiples include:\n\nUnit | Symbol | Value in janskys\nMegajansky | MJy | \\(10^6\\ \\mathrm{Jy}\\)\nMillijansky | mJy | \\(10^{-3}\\ \\mathrm{Jy}\\)\nMicrojansky | \\(\\mu\\mathrm{Jy}\\) | \\(10^{-6}\\ \\mathrm{Jy}\\)\nNanojansky | nJy | \\(10^{-9}\\ \\mathrm{Jy}\\)\n\nThe unit name is written in lowercase, while its symbol begins with a capital letter. Prefix capitalization is significant: mJy and MJy differ by a factor of \\(10^9\\)."
    },
    {
      "heading": "Physical meaning",
      "text": "Spectral flux density is commonly written \\(S_\\nu\\) or \\(F_\\nu\\), where \\(\\nu\\) denotes frequency. For a collecting area oriented perpendicular to the incoming radiation, the received power in a narrow frequency interval is approximately\n\n\\[dP=S_\\nu A\\,d\\nu,\\]\n\nwhere \\(A\\) is the collecting area. For an actual telescope, the effective collecting area accounts for the instrument’s efficiency and response.\n\nA source with a flux density of \\(1\\ \\mathrm{Jy}\\), approximately constant across a bandwidth of \\(1\\ \\mathrm{MHz}\\), produces a band-integrated flux of\n\n\\[F\\approx10^{-26}\\times10^6 =10^{-20}\\ \\mathrm{W\\,m^{-2}}.\\]\n\nThus, a value in janskys is not itself a total power or a flux integrated over all frequencies. The band-integrated flux is\n\n\\[F=\\int_{\\nu_1}^{\\nu_2}S_\\nu\\,d\\nu.\\]\n\nAlthough the dimensions of \\(\\mathrm{W\\,m^{-2}\\,Hz^{-1}}\\) can be reduced algebraically to those of energy per area, retaining the frequency denominator identifies the physical quantity being measured.\n\nFrequency and wavelength conventions\n\nThe jansky expresses spectral flux density per unit frequency, even when an observation is described by its wavelength. A measurement reported in janskys at a wavelength of \\(100\\ \\mu\\mathrm{m}\\), for example, still represents \\(S_\\nu\\), not flux density per micrometre.\n\nThe corresponding wavelength-based quantity \\(S_\\lambda\\) satisfies\n\n\\[S_\\lambda=S_\\nu\\left|\\frac{d\\nu}{d\\lambda}\\right| =S_\\nu\\frac{c}{\\lambda^2},\\]\n\nwhere \\(c\\) is the speed of light. This expression assumes wavelength is measured in metres when \\(S_\\lambda\\) is expressed per metre of wavelength. Converting to a value per micrometre requires an additional unit conversion."
    },
    {
      "heading": "Flux density, surface brightness, and image units",
      "text": "Flux density describes the received signal from a source or a specified region of the sky. It is distinct from specific intensity, or spectral surface brightness, which also specifies the signal per unit solid angle.\n\nFor a small astronomical source,\n\n\\[S_\\nu=\\int_{\\text{source}}I_\\nu\\,d\\Omega,\\]\n\nwhere \\(I_\\nu\\) is specific intensity and \\(d\\Omega\\) is an element of solid angle. Extended emission is often expressed in \\(\\mathrm{MJy\\,sr^{-1}}\\), including maps of interstellar dust and diffuse infrared radiation.\n\nImages made using radio interferometry commonly use Jy per beam, written \\(\\mathrm{Jy\\,beam^{-1}}\\). The beam represents the image’s angular response, often a fitted Gaussian restoring beam. In a properly normalized image, the peak value of an isolated unresolved source in Jy per beam is numerically approximately equal to its flux density in Jy. For a resolved source, its total flux density requires integration over its angular extent with the beam area taken into account. Jy per beam therefore cannot generally be treated as interchangeable with Jy."
    },
    {
      "heading": "Observational use and limitations",
      "text": "Janskys allow convenient reporting of the weak signals received from astronomical sources across radio, millimetre, submillimetre, and infrared wavelengths. Depending on the observing band and instrument, measurements may range from many janskys to microjanskys or less.\n\nA quoted value requires an observing frequency or bandpass to be physically informative. Astronomical spectra vary with frequency, so a source’s flux density at one frequency need not resemble its value at another. Broad-band measurements also depend on the instrument’s spectral response and the convention used to convert a band-integrated signal into a nominal flux density.\n\nFlux-density calibration generally relies on reference sources, physical emission models, or calibrated instrument responses. Its uncertainty can include instrumental noise, atmospheric effects, calibration errors, and source variability.\n\nThe jansky measures apparent received flux density, not intrinsic luminosity. Inferring a source’s luminosity additionally requires its distance and, for distant galaxies, appropriate treatment of redshift."
    },
    {
      "heading": "Historical origin",
      "text": "Karl Jansky detected extraterrestrial radio emission while investigating radio interference at Bell Telephone Laboratories in the early 1930s. He found that one component of the radio noise followed sidereal time rather than the solar day, indicating an origin beyond Earth. Its strongest direction was associated with the central region of the Milky Way.\n\nThe unit bearing his name became a standard practical measure in radio astronomy and was subsequently used more broadly for astronomical spectral flux densities."
    }
  ],
  "links": [
    "astronomy",
    "international-system-of-units",
    "telescope",
    "speed-of-light",
    "interferometry",
    "calibration",
    "measurement-uncertainty",
    "redshift",
    "milky-way"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}