{
  "id": "isoelectric-point",
  "title": "Isoelectric Point",
  "lang": "en",
  "source_lang": "en",
  "summary": "The isoelectric point is the pH at which a molecule has zero average net electric charge, or a particle has zero electrophoretic mobility under specified conditions.",
  "category": "science",
  "subcategory": "biology",
  "type": "concept",
  "aliases": [
    "pI",
    "Isoelectric pH"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/isoelectric-point/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/isoelectric-point/",
      "json": "https://aiwiki.page/zh/isoelectric-point.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The isoelectric point, usually written \\(pI\\), is the pH at which a molecule has zero average net electric charge. It is especially important for amino acids, peptides, and proteins, whose acidic and basic groups gain or lose protons as pH changes. For dispersed particles and surfaces, the term commonly denotes the pH at which electrophoretic mobility is zero. An isoelectric point is conditional on the chemical environment: temperature, solvent composition, dissolved salts, and bound substances can affect its value."
    },
    {
      "heading": "Molecular basis",
      "text": "Molecules containing both acidic and basic groups can carry positive and negative charges simultaneously. Their net charge depends on the balance between these charges, not simply on whether charged groups are present.\n\nAn amino acid with no ionizable side chain illustrates this behavior. At sufficiently low pH, its amino group is predominantly protonated and positively charged, while its carboxyl group is predominantly uncharged. As pH rises, the carboxyl group loses a proton, producing a zwitterion with both a positive and a negative group. At still higher pH, the amino group loses a proton and the molecule becomes predominantly negatively charged.\n\nAt the isoelectric point, the population-average charge is zero:\n\n\\[\\langle Z\\rangle=\\sum_i f_i Z_i=0,\\]\n\nwhere \\(Z_i\\) is the charge number of protonation state \\(i\\), and \\(f_i\\) is its fraction of the molecular population.\n\nZero average charge does not require every molecule to be in an uncharged state. Positively and negatively charged states can coexist, and a net-neutral molecule can retain strongly charged regions. Consequently, the isoelectric point does not eliminate local electrostatic interactions, hydrogen bonding, or binding to other molecules.\n\nFor a molecule whose charge is governed primarily by ordinary protonation equilibria:\n\n- Below its \\(pI\\), its average net charge is positive.\n- At its \\(pI\\), its average net charge is zero.\n- Above its \\(pI\\), its average net charge is negative.\n\nSpecific binding of ions or other charged substances can modify this simple relationship."
    },
    {
      "heading": "Calculation from acid–base equilibria",
      "text": "Amino acids with two ionizable groups\n\nThe charge balance follows from acid–base equilibria. The acidity of an ionizable group is commonly expressed by its \\(pK_a\\), the negative base-10 logarithm of its acid dissociation constant.\n\nFor a simple amino acid with two relevant dissociation steps,\n\n\\[\\mathrm{H_2A^+ \\rightleftharpoons HA^{\\pm}+H^+},\\]\n\n\\[\\mathrm{HA^{\\pm} \\rightleftharpoons A^-+H^+},\\]\n\nthe isoelectric point is given, in the usual dilute-solution treatment, by\n\n\\[pI=\\frac{pK_{a1}+pK_{a2}}{2}.\\]\n\nAt this pH, the concentrations of the positively and negatively charged forms are equal. The zwitterionic form is generally the most abundant species.\n\nFor glycine, commonly used aqueous \\(pK_a\\) values of approximately 2.34 and 9.60 give\n\n\\[pI\\approx\\frac{2.34+9.60}{2}=5.97.\\]\n\nThese numerical values depend on temperature and solution conditions.\n\nAmino acids with ionizable side chains\n\nWhen a side chain can gain or lose a proton, the relevant \\(pK_a\\) values are those of the two dissociation steps that bracket the net-neutral form. It is not generally correct to average all the molecule’s \\(pK_a\\) values.\n\nFor amino acids with acidic side chains, the neutral state is usually bracketed by the two lower dissociation constants. For amino acids with basic side chains, it is usually bracketed by the two higher ones. The governing rule is the sequence of charge states, rather than whether an amino acid is simply described as acidic or basic.\n\nProteins and other polyprotic molecules\n\nProteins contain many ionizable sites, including their amino and carboxyl termini and several types of side chain. Their isoelectric points are therefore usually estimated by constructing a charge–pH curve and finding its zero crossing.\n\nIn an independent-site approximation, the fractional charge of a basic group is\n\n\\[z_{\\mathrm{basic}}= \\frac{1}{1+10^{\\mathrm{pH}-pK_a}},\\]\n\nwhile that of an acidic group is\n\n\\[z_{\\mathrm{acidic}}= -\\frac{1}{1+10^{pK_a-\\mathrm{pH}}}.\\]\n\nThe predicted net charge is the sum of these contributions, together with any fixed charges. The predicted \\(pI\\) satisfies\n\n\\[Z(\\mathrm{pH})=0.\\]\n\nThis treatment assumes that each group can be assigned a suitable \\(pK_a\\) and treated independently. In real proteins, nearby charges, burial within the structure, and changes in protein conformation can shift dissociation equilibria and couple different sites."
    },
    {
      "heading": "Experimental determination",
      "text": "Isoelectric focusing\n\nIsoelectric focusing separates amphoteric molecules in a pH gradient under an electric field. A protein migrates until it reaches the region where the local pH equals its isoelectric point.\n\nThe separation is self-focusing. A protein displaced toward lower pH becomes positively charged and migrates back toward higher pH; displacement toward higher pH makes it negatively charged and drives it in the opposite direction.\n\nIsoelectric focusing is widely used in proteomics and protein characterization. In two-dimensional gel electrophoresis, it commonly provides the first separation dimension, followed by a second separation based predominantly on molecular size. Capillary isoelectric focusing offers a related format for resolving proteins and their charge variants.\n\nExperimental conditions matter. Denaturing agents, chemical modifications introduced during preparation, or altered solvent conditions can make the measured value differ from that of the native protein in another solution.\n\nElectrophoretic mobility measurements\n\nA particle’s electrophoretic mobility is its velocity relative to the surrounding fluid divided by the applied electric field:\n\n\\[\\mu_{\\mathrm{e}}=\\frac{v}{E}.\\]\n\nFor colloidal dispersions, an isoelectric point is commonly identified by measuring mobility at different pH values and locating its zero crossing. Such measurements are often expressed in terms of zeta potential, an electrokinetic potential associated with the slipping plane between the particle and surrounding liquid.\n\nThis operational definition is related to, but not identical with, zero total particle charge. Adsorbed ions and the surrounding electrical double layer influence mobility.\n\nPrediction and measurement\n\nA calculated protein \\(pI\\) is a model-dependent estimate, not a direct measurement. Different prediction methods can return different values because they use different dissociation constants or structural assumptions. Meaningful experimental reporting includes the solution conditions, temperature, method, and relevant measurement uncertainty."
    },
    {
      "heading": "Protein properties and applications",
      "text": "Solubility and aggregation\n\nMany proteins show relatively low solubility near their isoelectric points. Reduced net charge can weaken electrostatic repulsion between molecules, allowing attractive interactions to promote association, aggregation, or precipitation.\n\nThis is a tendency rather than a universal rule. Solubility also depends on surface charge distribution, hydrophobic interactions, salt concentration, temperature, and molecular structure. A protein can remain soluble at its \\(pI\\), and aggregation can occur far from it.\n\nIsoelectric precipitation exploits this behavior in protein isolation and food processing. Acid precipitation of casein near pH 4.6 is a familiar example, although casein consists of several related proteins rather than one chemically uniform species.\n\nSeparation and characterization\n\nThe isoelectric point helps determine protein behavior in ion-exchange chromatography. Below its \\(pI\\), a protein generally has a positive net charge and may bind to a negatively charged cation exchanger. Above its \\(pI\\), it generally has a negative net charge and may bind to a positively charged anion exchanger.\n\nActual retention also depends on local surface charges, salt concentration, accessibility of binding regions, and the stationary phase. Net charge alone does not fully predict chromatographic behavior.\n\nChanges in \\(pI\\) can reveal protein heterogeneity. Glycosylation, phosphorylation, deamidation, terminal processing, and other modifications may alter charge or the equilibria of nearby ionizable groups. Charge-based separations are therefore useful in characterizing antibodies, enzymes, and other protein products. A shifted isoelectric point does not by itself identify the chemical modification responsible."
    },
    {
      "heading": "Surfaces, colloids, and related concepts",
      "text": "Mineral particles, metal oxides, and other dispersed materials can acquire pH-dependent charge through surface protonation and deprotonation. Their electrokinetic isoelectric points are important in suspension stability, particle deposition, and aggregation.\n\nTwo related terms require distinction:\n\n- Point of zero charge: a condition at which a specified surface charge is zero. It is defined by charge balance rather than particle mobility.\n- Isoionic point: the pH at which an ampholyte has zero net charge under conditions without added electrolyte other than the ions associated with water and the ampholyte itself.\n\nThe isoelectric point and point of zero charge may coincide under suitable conditions, but they can differ when specific adsorption of ions changes the charge distribution between a surface and its surrounding liquid. Likewise, an isoionic point need not match an isoelectric point measured in a salt-containing solution."
    },
    {
      "heading": "Interpretation and limitations",
      "text": "The isoelectric point characterizes electrical behavior under specified conditions; it is not a universal indicator of molecular stability or biological function. In particular:\n\n- It is not necessarily the pH of maximum enzyme activity.\n- It does not imply that a protein has no charged groups.\n- It does not specify the spatial distribution of charge.\n- It does not guarantee precipitation or loss of solubility.\n- It does not uniquely identify a protein, because unrelated proteins can have similar \\(pI\\) values.\n\nFor proteins, changes in sequence, chemical modification, conformation, or ligand binding can alter the observed value. For particles, electrolyte composition and surface history can be equally important. Comparisons are therefore most informative when both the definition and the measurement conditions are matched."
    }
  ],
  "links": [
    "ph",
    "electric-charge",
    "amino-acid",
    "protein",
    "zwitterion",
    "hydrogen-bond",
    "ion",
    "acid-base-reaction",
    "protein-folding",
    "electric-field",
    "proteomics",
    "gel-electrophoresis",
    "measurement-uncertainty",
    "hydrophobic-effect",
    "chromatography",
    "glycosylation",
    "antibody",
    "enzyme",
    "adsorption"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}