{
  "id": "is-lm-model",
  "title": "IS–LM Model",
  "lang": "en",
  "source_lang": "en",
  "summary": "The IS–LM model explains how goods-market and money-market equilibrium jointly determine short-run output and interest rates.",
  "category": "economics",
  "subcategory": "macroeconomics",
  "type": "concept",
  "aliases": [
    "IS–LM framework",
    "Hicks–Hansen model",
    "investment–saving and liquidity preference–money supply model"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/is-lm-model/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/is-lm-model/",
      "json": "https://aiwiki.page/zh/is-lm-model.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The IS–LM model is a framework in macroeconomics that explains the joint determination of aggregate output and the interest rate through equilibrium in the goods market and the money market. Its name combines IS, conventionally interpreted as “investment–saving,” and LM, referring to “liquidity preference–money supply.” In its standard form, the model describes a closed economy over a short period in which the price level is fixed and production can respond to changes in demand.\n\nThe model became one of the principal ways of presenting Keynesian economics after the publication of John Maynard Keynes’s The General Theory of Employment, Interest and Money in 1936. It shows why an economy may settle at an output level below full employment and how fiscal policy and monetary policy can affect expenditure, output, and financing conditions. Its two intersecting curves also make clear that a policy’s effect depends on household behavior, investment sensitivity, money demand, and the monetary authority’s operating regime.\n\nIS–LM is a simplified analytical model rather than a complete account of an economy. Its treatment of prices, expectations, banking, and international transactions is deliberately limited. Nevertheless, its mechanisms remain important for understanding demand management, interest-rate crowding out, liquidity traps, and the transition from traditional Keynesian analysis to contemporary monetary models."
    },
    {
      "heading": "Historical development and intellectual setting",
      "text": "The origins of IS–LM lie in debates about the causes of the Great Depression and the possibility of persistent unemployment. Keynes challenged the view that flexible interest rates would reliably coordinate saving and investment at full employment. In his analysis, planned expenditure could be insufficient to purchase the output associated with full employment, while the interest rate depended importantly on preferences for holding money rather than only on the supply of saving and demand for investment funds.\n\nJohn Hicks supplied the best-known early diagrammatic interpretation in his 1937 article “Mr. Keynes and the ‘Classics’; A Suggested Interpretation.” Hicks represented equilibrium using an investment–saving schedule and a monetary-equilibrium schedule initially labeled LL. His formulation translated parts of Keynes’s argument into simultaneous relationships between income and the interest rate. Other economists, including James Meade and Roy Harrod, also developed related interpretations during the early discussion of the General Theory. The familiar framework therefore emerged from a broader attempt to make Keynes’s reasoning analytically tractable, rather than from the invention of an entirely new theory by a single diagram.\n\nAlvin Hansen subsequently helped establish the model in American teaching and policy discussion. His Monetary Theory and Fiscal Policy appeared in 1949, followed by A Guide to Keynes in 1953. Hansen’s exposition and its incorporation into postwar textbooks contributed to the alternative name “Hicks–Hansen model.” Within the postwar neoclassical synthesis, IS–LM supplied an account of short-run demand determination, while more conventional price and resource-allocation analysis was retained for other questions.\n\nThe model’s relationship to Keynes’s own work has remained a subject of interpretation. It captures the interaction between expenditure and liquidity preference, but its standard static presentation gives limited attention to fundamental uncertainty, changing expectations, and the distinction between short-term and long-term financial decisions. Hicks later emphasized the restrictions involved in using such an equilibrium construction. These qualifications matter because a convenient classroom representation is not necessarily a complete reconstruction of the book that inspired it.\n\nDuring the 1950s and 1960s, IS–LM became a common language for debates over stabilization policy and business cycles. Disagreements could be expressed through different assumptions about the slopes of the curves, the stability of money demand, or the interest sensitivity of investment. Subsequent developments in expectations theory, inflation analysis, and monetary operations reduced its role as a frontier research model, but it retained a substantial place in introductory and intermediate macroeconomics."
    },
    {
      "heading": "Variables, accounting, and short-run assumptions",
      "text": "The standard model places real output or income, \\(Y\\), on the horizontal axis and an interest rate, \\(i\\), on the vertical axis. Output is normally understood as real gross domestic product, while the price level, \\(P\\), converts nominal money balances, \\(M\\), into real balances, \\(M/P\\). Fiscal variables include government purchases, \\(G\\), and taxes, \\(T\\). The simplest version treats these policy variables, the nominal money stock, and the price level as externally determined.\n\nFor a closed economy, the expenditure identity is\n\n\\[Y=C+I+G,\\]\n\nwhere \\(C\\) is consumption and \\(I\\) is investment. In national accounting, this identity holds after transactions have occurred, including any unintended accumulation of inventories. Goods-market equilibrium imposes a stronger condition: firms’ output equals planned expenditure. If intended purchases fall short of production, unsold goods accumulate and firms may reduce output. If intended purchases exceed production, inventories are depleted and firms may expand production. The IS curve describes combinations at which this adjustment pressure is absent.\n\nA central assumption is that firms can change output without immediately changing the aggregate price level. This is usually interpreted as a short-run approximation involving spare capacity, sticky wages, sticky prices, or some combination of them. The model does not itself establish how much spare capacity exists. It also does not contain a full labor-market mechanism determining employment, wages, or potential output. Consequently, an equilibrium in IS–LM need not be an equilibrium with full employment, nor does it show how long a demand-induced output change can persist.\n\nInterest-rate measurement requires particular care. Investment decisions depend mainly on the expected real borrowing cost, whereas money demand ordinarily depends on the nominal return forgone by holding money. The approximate relationship is\n\n\\[r=i-\\pi^{e},\\]\n\nwhere \\(r\\) is the expected real interest rate and \\(\\pi^{e}\\) denotes expected inflation. Elementary treatments often assume expected inflation is zero or fixed, allowing a single interest-rate axis to serve both purposes. If expectations change, that simplification can be misleading: a constant nominal rate can coexist with a rising real borrowing cost.\n\nThe financial side is also highly aggregated. The traditional presentation often distinguishes only money and an interest-bearing bond, suppressing differences among maturities, borrowers, and financial instruments. It abstracts from separate lending spreads, default probabilities, and bank-capital constraints. These omissions make the model manageable but mean that its single interest rate cannot automatically be interpreted as every rate faced by households, firms, and governments."
    },
    {
      "heading": "The IS curve and expenditure determination",
      "text": "The IS curve represents combinations of output and the interest rate for which planned expenditure equals production. A familiar specification is\n\n\\[C=C_0+c(Y-T), \\qquad I=I_0-bi,\\]\n\nwith \\(0<c<1\\) and \\(b>0\\). Here \\(C_0\\) is autonomous consumption, \\(c\\) is the marginal propensity to consume out of disposable income, \\(I_0\\) represents investment determinants other than the current interest rate, and \\(b\\) measures investment’s sensitivity to that rate. With fixed expected inflation, using \\(i\\) rather than a separate real interest rate merely absorbs a constant into autonomous investment.\n\nSubstituting these relationships into the goods-market equilibrium condition gives\n\n\\[(1-c)Y=C_0+I_0+G-cT-bi.\\]\n\nWriting \\(A=C_0+I_0+G-cT\\), the equation becomes\n\n\\[Y=\\frac{A-bi}{1-c},\\]\n\nor, equivalently,\n\n\\[i=\\frac{A}{b}-\\frac{1-c}{b}Y.\\]\n\nThe negative slope expresses an expenditure mechanism: a higher interest rate reduces planned investment, lowering output directly and then reducing consumption as income falls. A lower interest rate operates in the opposite direction. Interest-sensitive purchases of housing and consumer durables can be incorporated into the same logic even when the simplest equation assigns all interest sensitivity to investment.\n\nThe curve’s steepness depends on behavioral parameters. With the interest rate on the vertical axis, its slope is \\(-(1-c)/b\\). A larger \\(b\\) makes IS flatter because a relatively small interest-rate change produces a larger expenditure response. A higher propensity to consume also makes it flatter in this specification because an initial expenditure change generates a larger sequence of income and consumption changes. Conversely, weak investment sensitivity makes a substantial interest-rate movement necessary to offset a given change in output.\n\nA movement along IS occurs when the interest rate changes while the underlying expenditure relationships remain fixed. A shift occurs when spending changes at a given interest rate. Higher government purchases, lower lump-sum taxes, improved expected profitability, or stronger autonomous consumption shift IS to the right. Greater desired saving at each income level shifts it left unless another expenditure component rises. With proportional taxes, \\(T=T_0+tY\\), part of each income increase is taxed away, and the expenditure multiplier becomes \\(1/[1-c(1-t)]\\). This illustrates how automatic stabilizers dampen fluctuations.\n\nThe investment–saving name follows from the same accounting structure. Define private saving as \\(S_p=Y-T-C\\) and government saving as \\(S_g=T-G\\). Goods-market equilibrium implies\n\n\\[S_p+S_g=I.\\]\n\nThus total domestic saving, including government saving, equals investment in a closed economy. Private saving alone equals investment only when the government budget is balanced. IS therefore does not mean that an independently fixed stock of household saving mechanically determines investment."
    },
    {
      "heading": "The LM curve and monetary equilibrium",
      "text": "The LM curve describes combinations of output and the nominal interest rate at which desired holdings of real money balances equal the available supply. Its general form is\n\n\\[\\frac{M}{P}=L(Y,i).\\]\n\nMoney demand is ordinarily assumed to rise with income and fall with the interest rate. Higher income generates more transactions and raises the demand for means of payment. A higher return on alternative assets raises the opportunity cost of holding money, reducing desired balances when money itself pays little or no interest. In a modern setting with interest-bearing deposits, the relevant opportunity cost is more precisely a spread between the returns on money-like assets and their substitutes.\n\nA linear specification makes the mechanism explicit:\n\n\\[L(Y,i)=kY-hi,\\]\n\nwhere \\(k>0\\) measures income sensitivity and \\(h>0\\) measures interest sensitivity. Monetary equilibrium then requires\n\n\\[i=\\frac{k}{h}Y-\\frac{M/P}{h}.\\]\n\nFor a fixed supply of real balances, the curve slopes upward. As output rises, transactions demand increases. The interest rate must rise to induce people to economize on money holdings sufficiently to preserve monetary equilibrium. This is an equilibrium relationship, not a claim that output mechanically causes the central bank to raise its policy rate.\n\nThe adjustment can be expressed through asset trading. If desired money holdings exceed the existing quantity at a particular income and interest rate, asset holders try to sell bonds to obtain money. Collectively, they cannot create additional aggregate money balances merely by trading existing assets among themselves. Instead, bond prices fall and yields rise until desired balances are compatible with supply. Excess money holdings generate the reverse pressure. This simplified mechanism connects the money market with the pricing of interest-bearing assets.\n\nAn increase in the money supply, with the price level unchanged, shifts LM downward or to the right: a lower interest rate is compatible with each output level. An increase in the price level, with nominal money unchanged, reduces real balances and shifts LM upward or leftward. A rise in the preference for liquidity has a similar contractionary effect if it raises desired balances at each income and rate.\n\nThe choice of monetary aggregate is consequential. Monetary base, bank reserves, currency, and broad deposit money are not interchangeable concepts. Commercial banks create deposits through lending, and the relationship between reserves and deposits is not a mechanically fixed multiple. The traditional LM construction therefore assumes that a relevant monetary quantity can be treated as given; it does not provide a complete theory of deposit creation or central-bank implementation. Where a central bank instead fixes a short-term interest rate, the supply of settlement balances generally adjusts to support that target, requiring a different policy closure."
    },
    {
      "heading": "Joint equilibrium and comparative statics",
      "text": "The intersection of IS and LM determines the pair \\((Y^*,i^*)\\) that satisfies both equilibrium conditions. Neither curve independently determines the economy’s outcome. Goods-market equilibrium alone leaves many possible output–interest combinations, while monetary equilibrium alone does the same. Their intersection is a limited form of simultaneous general-equilibrium reasoning: decisions in one aggregate market affect conditions in the other, although many other markets and prices remain outside the model.\n\nFor the linear system, define real money balances as \\(m=M/P\\). The two equations are\n\n\\[(1-c)Y=A-bi, \\qquad m=kY-hi.\\]\n\nSolving gives\n\n\\[Y^*=\\frac{hA+bm}{h(1-c)+bk},\\]\n\nand\n\n\\[i^*=\\frac{kA-(1-c)m}{h(1-c)+bk}.\\]\n\nWith the standard parameter restrictions, the denominator is positive and the equilibrium is unique. The equations show that higher autonomous expenditure increases both output and the interest rate, whereas higher real money balances increase output and reduce the interest rate.\n\nA numerical example illustrates the simultaneous adjustment. Suppose\n\n\\[C=100+0.8(Y-100),\\qquad I=200-20i,\\qquad G=100,\\]\n\nand\n\n\\[\\frac{M}{P}=200,\\qquad L=0.5Y-20i.\\]\n\nHere \\(i\\) is measured in percentage points, and all other quantities use consistent illustrative units. The IS equation becomes\n\n\\[Y=1600-100i,\\]\n\nwhile LM becomes\n\n\\[i=0.025Y-10.\\]\n\nTheir intersection is approximately \\(Y=742.9\\) and \\(i=8.57\\). Substitution into both equations confirms that planned spending equals output and desired money balances equal the assumed supply.\n\nNow raise government purchases by 20. IS becomes \\(Y=1700-100i\\), while LM is unchanged. The new equilibrium is approximately \\(Y=771.4\\) and \\(i=9.29\\). Output rises by about 28.6, giving a government-purchases multiplier of roughly 1.43. If the interest rate had remained fixed, the simple expenditure multiplier would instead have been \\(1/(1-0.8)=5\\), producing an output increase of 100. The difference reflects the investment reduction induced by the higher equilibrium interest rate.\n\nThese calculations are exercises in comparative statics: they compare equilibria before and after an external change. They do not establish the adjustment path, the time needed to reach the new intersection, or whether expectations change during the transition. A dynamic interpretation requires additional equations. For example, output might respond to excess demand while the interest rate responds to excess money demand. Whether such a process converges depends on its specified adjustment rules and speeds, rather than on the existence of an intersection alone."
    },
    {
      "heading": "Fiscal policy, monetary policy, and their interaction",
      "text": "Fiscal expansion shifts IS to the right when it increases planned demand at a given interest rate. In the basic model, higher government purchases enter expenditure directly, whereas lower lump-sum taxes initially affect consumption only through the fraction of additional disposable income that households spend. With an unchanged money stock, the increase in output raises money demand and therefore the equilibrium interest rate. Higher financing costs then reduce interest-sensitive private spending, partially offsetting the original stimulus. This offset is called interest-rate crowding out.\n\nFor the linear specification, the government-purchases multiplier is\n\n\\[\\frac{\\partial Y}{\\partial G} = \\frac{h}{h(1-c)+bk} = \\frac{1}{1-c+bk/h}.\\]\n\nThe corresponding lump-sum tax multiplier is\n\n\\[\\frac{\\partial Y}{\\partial T} = -\\frac{ch}{h(1-c)+bk}.\\]\n\nThese expressions show why neither multiplier is a universal constant. Greater interest sensitivity of investment, a stronger income effect on money demand, or a steeper LM curve produces more monetary feedback against fiscal expansion. A more interest-elastic demand for money permits output to rise with a smaller rate increase.\n\nMonetary expansion works through a different sequence. An increase in real money balances shifts LM downward, reducing the interest rate at the initial output level. Lower borrowing costs stimulate planned investment and other interest-sensitive expenditure, which raises output. In the linear system,\n\n\\[\\frac{\\partial Y}{\\partial (M/P)} = \\frac{b}{h(1-c)+bk}.\\]\n\nThis is a compressed representation of the monetary transmission mechanism. Actual transmission can also involve exchange rates, asset prices, expectations, and bank lending conditions, none of which is separately modeled in the basic diagram.\n\nPolicy interactions are therefore central. If monetary authorities accommodate a fiscal expansion by supplying enough money to keep the interest rate unchanged, the conventional interest-rate crowding-out channel disappears. In that case, the government-purchases multiplier returns to \\(1/(1-c)\\) within the model. If the central bank instead raises its policy rate in response to fiscal expansion, the output effect is smaller. The same fiscal action can consequently have different effects under different monetary regimes.\n\nThe model also permits a distinction between instruments and targets. Fiscal authorities directly influence purchases and taxes, while monetary authorities may choose a money quantity or an interest-rate target. Neither instrument can generally fix both output and the interest rate independently without coordination. Moreover, the standard framework does not track the government’s evolving debt, future tax obligations, or possible changes in sovereign borrowing costs. Arguments involving debt sustainability or Ricardian equivalence require additional assumptions about intertemporal budgets and household expectations. IS–LM identifies a short-run demand mechanism, not a complete assessment of fiscal financing."
    },
    {
      "heading": "Liquidity traps, limiting cases, and deflation",
      "text": "A liquidity trap is a condition in which additional money balances have little effect on the relevant interest rate and expenditure. In the traditional presentation, the LM curve becomes nearly horizontal at a sufficiently low rate because money and short-term bonds become close substitutes. Investors are willing to hold additional money rather than bid bond yields substantially lower. A monetary expansion can then change portfolio composition without generating a meaningful decline in borrowing costs.\n\nIn the linear model, an increasingly large \\(h\\) approximates this condition locally. The monetary effect on output,\n\n\\[\\frac{\\partial Y}{\\partial (M/P)} = \\frac{b}{h(1-c)+bk},\\]\n\napproaches zero as \\(h\\) becomes very large. Meanwhile, the government-purchases multiplier approaches \\(1/(1-c)\\). Fiscal expansion raises output with little increase in the interest rate because money demand absorbs the associated changes in transactions needs without a substantial yield adjustment. A perfectly horizontal LM is an idealized limiting case, not a claim that money demand must have that shape at every low interest rate.\n\nThe modern effective lower bound is closely related but not identical. The availability of currency limits how far short-term nominal rates can fall, although storage, insurance, and institutional costs have allowed moderately negative policy rates in some economies. A lower bound on nominal rates can prevent monetary authorities from delivering a sufficiently low real rate during a severe downturn. If expected inflation falls, the real rate \\(r=i-\\pi^e\\) rises even when the nominal rate remains unchanged, further weakening investment and consumption.\n\nThe opposite monetary limiting case occurs when money demand is interest-inelastic. With \\(h=0\\), monetary equilibrium reduces to\n\n\\[Y=\\frac{M/P}{k},\\]\n\nso LM is vertical. Fiscal expansion then raises the interest rate without increasing output, because private interest-sensitive expenditure is fully crowded out within the model. Another limiting case is interest-insensitive investment: if \\(b=0\\), IS is vertical and ordinary monetary expansion cannot raise output through the investment channel. These cases identify assumptions behind policy conclusions rather than establishing that an economy permanently belongs to one category.\n\nThe global financial crisis of 2007–2009 renewed attention to low-rate conditions and impaired transmission. However, a flat LM curve alone cannot explain the role of credit losses, disrupted financial intermediation, or sharply changing lending spreads. Nor does it imply that every form of monetary policy is ineffective. Asset purchases can affect longer-term yields and risk premia, while forward guidance can influence expected future rates. These channels require a richer financial structure.\n\nFalling prices also have ambiguous effects beyond the fixed-price model. With nominal money constant, deflation raises real balances and shifts LM outward. But it can simultaneously increase real debt burdens, weaken borrowers’ balance sheets, and raise real interest rates through expectations of further price declines. Those effects can offset or reverse the expansionary real-balance mechanism."
    },
    {
      "heading": "Open-economy extensions and exchange-rate regimes",
      "text": "The original IS–LM model is closed to international trade and capital flows. An open-economy version adds net exports to planned expenditure:\n\n\\[Y=C(Y-T)+I(r)+G+NX(q,Y,Y^*),\\]\n\nwhere \\(q\\) denotes a real exchange rate and \\(Y^*\\) is foreign income. Net exports generally decline when domestic income increases because imports rise. A real depreciation can increase demand for domestic goods, although its effect depends on trade responsiveness, invoicing, production networks, and the timing of contract adjustment.\n\nThe best-known extension is the Mundell–Fleming model, developed through work by Robert Mundell and Marcus Fleming in the early 1960s. It combines domestic goods- and money-market equilibrium with international financial flows. Under the particularly strong assumptions of a small economy, perfect capital mobility, and a fixed expected exchange rate, domestic interest rates are tied closely to the world rate. More generally, expected exchange-rate changes and risk premia also affect the relationship between domestic and foreign returns.\n\nUnder a floating exchange rate, monetary expansion tends to lower domestic interest rates initially. Capital outflows and portfolio shifts put downward pressure on the currency, and depreciation can raise net exports. In the textbook perfect-capital-mobility case, the exchange-rate channel strengthens the output effect of monetary policy. Fiscal expansion, by contrast, creates upward interest-rate pressure, attracts capital, and appreciates the currency. The resulting decline in net exports can offset the initial demand increase; in the strict limiting case, fiscal expansion does not raise equilibrium output.\n\nUnder a fixed exchange rate, the policy logic changes. To maintain the peg, the monetary authority must intervene when financial pressures would otherwise move the currency. A fiscal expansion that attracts capital can lead to reserve accumulation and monetary expansion, reinforcing the rise in output. An attempted independent monetary expansion creates pressure for depreciation; defending the peg requires intervention that reverses the monetary increase. These outcomes illustrate the impossible trinity: unrestricted capital mobility, a fixed exchange rate, and independent monetary policy cannot all be maintained simultaneously.\n\nThese results depend on stringent assumptions. Capital controls, imperfect substitutability between assets, country risk, and changes in expected depreciation weaken the simple interest-rate constraint. Foreign-currency debt can make depreciation contractionary by increasing domestic-currency debt burdens. Trade balances can also respond slowly because import prices change before quantities do.\n\nAn additional curve is sometimes used to represent external equilibrium, producing an IS–LM–BP diagram, where BP refers to the balance of payments. Its slope reflects how trade flows and capital flows respond to income and interest rates. This framework should not be read as implying that balance-of-payments accounting sometimes fails: the accounts balance by construction. The external-equilibrium condition instead concerns a specified combination of current-account transactions, capital flows, and reserve changes compatible with the assumed exchange-rate arrangement."
    },
    {
      "heading": "Prices, expectations, and contemporary model design",
      "text": "Allowing the price level to vary provides a bridge from IS–LM to the aggregate-demand–aggregate-supply framework. For a fixed nominal money stock, a higher price level reduces real balances, shifts LM upward, and lowers equilibrium output. Repeating the exercise for different price levels traces a downward-sloping aggregate-demand curve. An aggregate-supply relationship is then needed to determine output and prices jointly. This extension is distinct from the original fixed-price model: an expansion that raises output substantially when resources are idle may produce mainly higher prices near productive capacity.\n\nInflation also requires an account of wage setting, price setting, and expectations. Postwar models frequently combined demand analysis with a Phillips curve, linking inflation to labor-market pressure or the output gap. Such a combination can examine how demand expansion influences inflation, but its results depend on whether expected inflation adjusts and how potential output is determined. The traditional two-curve diagram alone cannot explain sustained inflation, supply shocks, or long-run economic growth.\n\nA further change concerns the monetary-policy instrument. Contemporary central banks commonly implement policy by steering a short-term nominal rate rather than announcing a fixed path for a broad monetary aggregate. In an IS–MP presentation, the traditional LM curve is replaced by a monetary-policy schedule. A rate peg produces a horizontal schedule at the chosen rate, whereas a rule responding to inflation and output can produce a schedule with a different slope. A Taylor rule, associated with John Taylor’s 1993 formulation, is a prominent example of a systematic interest-rate response. The money stock then adjusts endogenously to money demand and financial institutions’ behavior, subject to the operating framework.\n\nExpectations introduce deeper modifications. A simple New Keynesian demand equation can be written as\n\n\\[x_t=E_t x_{t+1} -\\frac{1}{\\sigma} \\left(i_t-E_t\\pi_{t+1}-r_t^n\\right),\\]\n\nwhere \\(x_t\\) is the output gap, \\(E_t\\) denotes expectations conditional on information at time \\(t\\), \\(\\sigma>0\\) is a preference-related parameter, and \\(r_t^n\\) is the natural real interest rate. Unlike the static IS curve, this relationship connects current spending to expected future activity and the gap between the real policy rate and the natural rate. Together with a forward-looking inflation equation and a policy rule, it forms a basic monetary model.\n\nThe development of rational expectations and Robert Lucas’s 1976 critique of policy evaluation challenged the use of behavioral relationships assumed to remain unchanged across policy regimes. Consumption, investment, and wage-setting behavior can change when people understand that policy rules have changed. Dynamic stochastic general equilibrium models consequently derive many relationships from explicit household and firm decisions, intertemporal constraints, and expectations. Such models introduce their own simplifying assumptions and are not merely more detailed versions of the original diagram.\n\nFinancial heterogeneity remains another important distinction. A central-bank policy rate can fall while business lending rates rise because perceived credit risk or intermediary funding costs increase. Credit availability can contract even without a large change in observed average rates, especially when collateral values or bank capital deteriorate. Extensions that separate policy rates from borrowing rates, introduce credit constraints, or track sectoral balance sheets can represent these mechanisms. In those settings, the traditional IS–LM intersection is best understood as a restricted benchmark against which the effects of additional markets, expectations, and institutional arrangements can be identified."
    }
  ],
  "links": [
    "macroeconomics",
    "interest-rate",
    "keynesian-economics",
    "john-maynard-keynes",
    "fiscal-policy",
    "monetary-policy",
    "great-depression",
    "unemployment",
    "john-hicks",
    "business-cycle",
    "gross-domestic-product",
    "national-accounts",
    "inventory",
    "labor-market",
    "inflation-expectations",
    "disposable-income",
    "automatic-stabilizers",
    "saving",
    "opportunity-cost",
    "money-supply",
    "liquidity",
    "monetary-base",
    "deposit-money",
    "central-bank",
    "general-equilibrium",
    "fiscal-multiplier",
    "public-debt",
    "liquidity-trap",
    "global-financial-crisis",
    "quantitative-easing",
    "forward-guidance",
    "deflation",
    "exchange-rate",
    "impossible-trinity",
    "balance-of-payments",
    "aggregate-demand",
    "aggregate-supply",
    "phillips-curve",
    "economic-growth",
    "taylor-rule",
    "new-keynesian-economics",
    "rational-expectations",
    "lucas-critique",
    "dynamic-stochastic-general-equilibrium",
    "credit-risk",
    "collateral",
    "bank-capital",
    "balance-sheet"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}