{
  "id": "international-commission-on-stratigraphy",
  "title": "International Commission on Stratigraphy",
  "lang": "en",
  "source_lang": "en",
  "summary": "The International Commission on Stratigraphy develops global standards for classifying rock strata and defining the divisions of geological time.",
  "category": "science",
  "subcategory": "earth-science",
  "type": "organization",
  "aliases": [
    "ICS"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/international-commission-on-stratigraphy/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/international-commission-on-stratigraphy/",
      "json": "https://aiwiki.page/zh/international-commission-on-stratigraphy.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The International Commission on Stratigraphy (ICS) is a scientific commission of the International Union of Geological Sciences (IUGS) responsible for developing internationally agreed standards for the subdivision and correlation of geological time and the rock record. Its principal work is to define the units of the International Chronostratigraphic Chart, including their names, ranks, and boundaries. These standards provide a common framework for geology, paleontology, and other sciences that investigate the history of Earth."
    },
    {
      "heading": "Purpose and scope",
      "text": "Rock sequences differ greatly between regions. Sedimentation may be continuous in one basin but interrupted elsewhere; organisms may occur only in particular environments; and later deformation or erosion may remove or obscure parts of the record. Consequently, local names and observable changes in rocks do not automatically provide a globally consistent chronology.\n\nICS addresses this problem through stratigraphy, the study of rock layers and their relationships. It coordinates the selection of reference boundaries that allow geologists to correlate sequences across continents and ocean basins. Its work distinguishes two closely related systems:\n\n- Chronostratigraphy classifies bodies of rock according to when they formed.\n- Geochronology describes the intervals of time during which those rocks formed.\n\nThe corresponding hierarchy is:\n\nChronostratigraphic unit: rocks | Geochronologic unit: time\nEonothem | Eon\nErathem | Era\nSystem | Period\nSeries | Epoch\nStage | Age\n\nThus, the Jurassic System refers to rocks formed during the Jurassic Period. Similarly, “Lower” and “Upper” ordinarily describe positions within chronostratigraphic units, whereas “Early” and “Late” describe portions of geological time.\n\nICS does not name every rock formation or replace national geological organizations. Local formations are commonly defined by lithology—the physical character of rocks—and need not correspond to globally standardized time divisions."
    },
    {
      "heading": "Organization and decision-making",
      "text": "ICS operates through an executive and specialist subcommissions. Many subcommissions are responsible for particular parts of the geological time scale; others address broader stratigraphic classification issues. Working groups undertake detailed investigations of proposed units and boundaries.\n\nA boundary proposal normally develops through several stages:\n\n- Researchers investigate candidate reference sections and the evidence available for international correlation.\n- A working group evaluates the alternatives and prepares a formal proposal.\n- The responsible subcommission considers and votes on the proposal.\n- A successful proposal proceeds to the ICS voting body.\n- Final ratification is undertaken by the IUGS.\n\nThis procedure separates the publication of a scientific proposal from its adoption as an international standard. A name or boundary used in research is not necessarily a formally ratified unit.\n\nThe system combines field investigation with collective scientific judgment. Important considerations include the completeness of a section, the reproducibility of its interpretation, its accessibility, and the usefulness of its markers outside the region where it is located."
    },
    {
      "heading": "Boundary definitions",
      "text": "Global Boundary Stratotype Sections and Points\n\nThe principal method for defining many boundaries is the Global Boundary Stratotype Section and Point (GSSP), informally called a golden spike. A GSSP identifies a precise point within a specified geological section that serves as the reference for the base of a chronostratigraphic unit.\n\nA GSSP is a physical reference, not simply an estimated numerical date. Its position may be associated with a fossil occurrence, a chemical signal, a magnetic reversal, or another recognizable feature. Several independent signals are generally desirable because no single marker is equally useful in every environment.\n\nEvidence used to establish and correlate boundaries includes:\n\n- Biostratigraphy: the distribution and succession of fossils, especially those useful for recognizing equivalent intervals in different locations.\n- Magnetostratigraphy: changes in the polarity of Earth's magnetic field recorded in rocks.\n- Chemostratigraphy: variations in chemical composition, including isotope ratios.\n- Radiometric dating: numerical ages derived from radioactive decay, often obtained from volcanic material within or near a sequence.\n- Astronomical and sedimentary patterns: cyclic changes that can help establish the sequence and duration of events.\n\nThe primary marker used to recognize a boundary and the boundary's formal definition are not identical. For example, a fossil's apparent first occurrence may differ between regions because of migration, preservation, or incomplete sampling. The ratified reference point remains the standard against which correlations are assessed.\n\nA desirable GSSP lies in a well-studied sequence with minimal interruption or alteration. Long-term protection and access matter because the reference must remain available for further investigation.\n\nGlobal Standard Stratigraphic Ages\n\nSome divisions, particularly in the older Precambrian record, have been defined using Global Standard Stratigraphic Ages (GSSAs). A GSSA fixes a boundary at an agreed numerical age rather than at a particular point in a reference section.\n\nThis distinction has practical consequences. For a GSSP-defined boundary, improved dating can change the estimated numerical age without changing the boundary's defining position. For a GSSA-defined boundary, the agreed numerical age is itself the definition.\n\nThe use of physical reference sections has expanded as researchers have developed better ways to correlate ancient rocks, but numerical definitions remain part of the international framework."
    },
    {
      "heading": "The International Chronostratigraphic Chart",
      "text": "The International Chronostratigraphic Chart is the most widely recognized product of ICS. It presents the hierarchy of internationally recognized units, their names, numerical boundary ages, and the status of formal boundary definitions. Updated editions incorporate ratifications, revised age estimates, and other approved changes.\n\nThe chart is not simply a list of equally spaced time intervals. Geological divisions arose from the study of the rock record and have widely varying durations. Some boundaries coincide with major changes in life or Earth systems, but a globally significant event does not automatically qualify as a formal boundary.\n\nNumerical ages shown on the chart must also be interpreted carefully. A printed value may be an estimate for a physically defined boundary rather than an exact defining number. Changes in analytical methods, calibration, and measurement uncertainty can lead to revisions.\n\nThe chart is used in geological maps, scientific papers, museum displays, teaching materials, and databases. Because it is periodically revised, its edition matters when comparing names and ages across publications."
    },
    {
      "heading": "Historical development",
      "text": "The commission's work builds on stratigraphic systems developed during the nineteenth and twentieth centuries. Many familiar geological names originated in regional investigations, particularly in Europe, before sufficiently detailed global correlations were possible.\n\nInternational standardization became increasingly important as geological research expanded worldwide. The creation of the IUGS in 1961 provided an institutional setting for coordinating geological standards, and ICS developed the procedures through which international boundary definitions are evaluated.\n\nAn early landmark was the boundary at Klonk, in what is now the Czech Republic, defining the base of the Devonian System. Ratified in 1972, it became the first GSSP. Subsequent work extended the reference-section approach across much of the geological record."
    },
    {
      "heading": "Applications and limitations",
      "text": "ICS standards allow researchers to compare events recorded in different settings: marine rocks, continental deposits, volcanic sequences, and other geological archives. This common framework supports studies of evolution, extinction, past climate change, and the development of sedimentary basins.\n\nStandardization does not eliminate uncertainty. A reference boundary can be precisely specified while its recognition in another section remains difficult. Missing strata, sparse fossils, environmental differences, chemical alteration, and limited dating material can all impede correlation. A standardized boundary also need not mark an instantaneous worldwide environmental transition.\n\nThe distinction between formal classification and broader scientific terminology is illustrated by the proposed Anthropocene Epoch. In 2024, the proposal to establish it as a formal unit of the geological time scale was rejected through the ICS–IUGS process. That decision concerned a specific stratigraphic proposal; it did not prevent continued informal use of “Anthropocene” or negate the evidence for human alteration of Earth systems."
    }
  ],
  "links": [
    "geology",
    "paleontology",
    "earth",
    "erosion",
    "stratigraphy",
    "geochronology",
    "magnetic-field",
    "isotope",
    "radiometric-dating",
    "measurement-uncertainty",
    "evolution",
    "extinction",
    "climate-change"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}