{
  "id": "illuminance",
  "title": "Illuminance",
  "lang": "en",
  "source_lang": "en",
  "summary": "Illuminance is the luminous flux incident per unit area on a surface, weighted for human visual sensitivity and measured in lux.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Incident luminous flux density"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/illuminance/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/illuminance/",
      "json": "https://aiwiki.page/zh/illuminance.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Illuminance is the amount of luminous flux incident on a surface per unit area. It describes how strongly a surface is illuminated, with the incoming light weighted according to the spectral sensitivity of human vision rather than simply by its radiant power. Its SI unit is the lux (lx), equal to one lumen per square metre. Illuminance depends on the quantity and direction of incoming light and on the orientation of the receiving surface; it does not by itself describe how bright that surface appears."
    },
    {
      "heading": "Definition and units",
      "text": "At a point on a receiving surface, illuminance \\(E_v\\) is defined by\n\n\\[E_v=\\frac{\\mathrm{d}\\Phi_v}{\\mathrm{d}A},\\]\n\nwhere \\(\\mathrm{d}\\Phi_v\\) is the luminous flux incident on an infinitesimal surface element of area \\(\\mathrm{d}A\\). The subscript \\(v\\) identifies a photometric, or visually weighted, quantity.\n\nFor a finite area \\(A\\), the average illuminance is\n\n\\[\\overline{E}_v=\\frac{\\Phi_v}{A}.\\]\n\nThus, 1,000 lumens distributed uniformly over 10 square metres produce an illuminance of 100 lux. If the distribution is nonuniform, this calculation gives only the area average, not the illuminance at every point.\n\nThe unit relationship is\n\n\\[1\\ \\mathrm{lx}=1\\ \\mathrm{lm\\,m^{-2}}.\\]\n\nA non-SI unit still used in some lighting practice, particularly in the United States, is the foot-candle: one lumen per square foot. Its conversion is approximately\n\n\\[1\\ \\mathrm{fc}=10.7639\\ \\mathrm{lx}.\\]\n\nDespite its name, a foot-candle is a unit of illuminance, not a measure of a candle’s luminous intensity."
    },
    {
      "heading": "Photometric basis",
      "text": "Illuminance belongs to photometry, which measures optical radiation according to its effectiveness in stimulating human vision. This distinguishes it from radiometry, which measures electromagnetic radiation in physical energy or power units without visual weighting.\n\nThe radiometric counterpart of illuminance is irradiance, measured in watts per square metre. For ordinary photopic photometry, illuminance is obtained from spectral irradiance by\n\n\\[E_v=K_m\\int_0^\\infty E_{e,\\lambda}(\\lambda)V(\\lambda)\\,\\mathrm{d}\\lambda,\\]\n\nwhere:\n\n- \\(E_{e,\\lambda}(\\lambda)\\) is the incident radiant power per unit area per unit wavelength;\n- \\(V(\\lambda)\\) is the standardized photopic spectral luminous efficiency function;\n- \\(K_m\\) is the maximum photopic luminous efficacy, approximately \\(683\\ \\mathrm{lm\\,W^{-1}}\\).\n\nThe wavelength units used for spectral irradiance and for the integration must be consistent.\n\nThe function \\(V(\\lambda)\\) represents standardized sensitivity under relatively bright, cone-mediated viewing conditions and peaks near 555 nanometres, in the green part of the spectrum. Consequently, equal radiant powers at different wavelengths generally produce different illuminances. Infrared radiation can deliver substantial irradiance while contributing essentially no illuminance.\n\nAt low light levels, rod-mediated vision has a different spectral sensitivity. Scotopic and mesopic photometry address these conditions. Ordinary lux readings generally use photopic weighting, so equal illuminances need not correspond to equal visual effectiveness under all adaptation conditions."
    },
    {
      "heading": "Direction, distance, and surface orientation",
      "text": "Cosine dependence\n\nA beam illuminates a surface most strongly when it arrives perpendicular to that surface. For a parallel beam, the illuminance varies with the angle of incidence according to\n\n\\[E_v=E_{v,\\perp}\\cos\\theta,\\]\n\nwhere \\(\\theta\\) is the angle between the incoming direction and the surface normal, and \\(E_{v,\\perp}\\) is the illuminance on a surface perpendicular to the beam.\n\nThis cosine factor arises because an oblique beam spreads the same intercepted flux over a larger surface area. It is a geometrical effect and does not depend on the surface’s reflectance.\n\nInverse-square relationship\n\nFor a source sufficiently small to be treated as a point, the direct illuminance on a receiving surface is\n\n\\[E_v=\\frac{I_v(\\alpha)\\cos\\theta}{r^2},\\]\n\nwhere \\(I_v(\\alpha)\\) is the source’s luminous intensity in the direction of the receiving point, \\(r\\) is the distance, and \\(\\theta\\) is the incidence angle at the surface.\n\nAt normal incidence, a source with a luminous intensity of one candela produces one lux at a distance of one metre. Doubling the distance reduces the direct illuminance to one-quarter, provided that the point-source approximation remains valid and absorption or obstruction is negligible.\n\nThis simple relationship does not directly describe illumination close to large luminous panels, long lamps, or other extended sources. Their contributions must be integrated over the source geometry. Reflections from walls and other objects can also substantially alter the total illuminance.\n\nGeneral directional relationship\n\nFor light arriving from many directions, illuminance can be expressed using luminance:\n\n\\[E_v=\\int_{\\Omega^+}L_v(\\theta,\\phi)\\cos\\theta\\,\\mathrm{d}\\Omega.\\]\n\nHere \\(L_v\\) is the incident luminance in a particular direction, \\(\\mathrm{d}\\Omega\\) is an element of solid angle, and the integral covers the hemisphere facing the surface. This expression accounts for both concentrated light sources and diffuse illumination, such as an overcast sky."
    },
    {
      "heading": "Distinction from related quantities",
      "text": "Several lighting quantities describe different aspects of light and are not interchangeable.\n\nQuantity | What it describes | Common SI unit\nLuminous flux | Total visually weighted light power | lumen (lm)\nLuminous intensity | Luminous flux emitted per unit solid angle in a specified direction | candela (cd)\nIlluminance | Luminous flux incident per unit surface area | lux (lx)\nLuminance | Directional luminous intensity per unit projected area | candela per square metre (\\(\\mathrm{cd\\,m^{-2}}\\))\nLuminous exitance | Luminous flux leaving a surface per unit area | lumen per square metre (\\(\\mathrm{lm\\,m^{-2}}\\))\n\nIlluminance concerns incoming light, whereas luminous exitance concerns outgoing light. They have equivalent unit dimensions but represent different quantities.\n\nLuminance is more directly associated with the light reaching an observer from a particular direction. A white sheet and a dark sheet can receive the same illuminance while having very different luminances because they reflect different fractions of the incident light.\n\nFor an ideal, perfectly diffuse reflecting surface,\n\n\\[L_v=\\frac{\\rho_v E_v}{\\pi},\\]\n\nwhere \\(\\rho_v\\) is the luminous reflectance. This relationship assumes Lambertian reflection; it does not generally apply to glossy, specular, or directionally reflecting surfaces.\n\nPerceived brightness also depends on visual adaptation, contrast, surrounding luminances, and other viewing conditions. It therefore cannot be inferred from illuminance alone."
    },
    {
      "heading": "Measurement",
      "text": "Illuminance is measured with an illuminance meter, commonly called a lux meter. A typical instrument uses a semiconductor photodetector, spectral filters, and a diffuser. The filters approximate the photopic sensitivity function, while the diffuser helps reproduce the required cosine response.\n\nImportant measurement characteristics include:\n\n- Spectral matching: departures from the standardized visual sensitivity function can cause errors that depend on the source spectrum.\n- Angular response: an imperfect cosine response produces errors when light arrives obliquely.\n- Linearity and range: the detector and electronics must respond appropriately across the measured illuminance range.\n- Temporal response: fluctuating or pulsed lighting may require measurements that resolve time variation rather than merely report an average.\n- Calibration: Calibration and metrological traceability establish the relationship between instrument readings and recognized measurement standards.\n\nA complete measurement specifies the detector’s position and orientation. Horizontal illuminance on a desk, vertical illuminance at eye level, and illuminance on an inclined display are different measurements, even at nearly the same location.\n\nPractical measurement uncertainty can also arise from shading by the observer, stray reflections, changing daylight, detector temperature, and spatial variation across the receiving area. A single reading does not establish the uniformity of lighting throughout a room."
    },
    {
      "heading": "Typical magnitudes",
      "text": "Illuminance varies over many orders of magnitude. Approximate examples include:\n\nLighting condition | Illustrative illuminance\nClear full-moon illumination | About \\(0.1\\)–\\(0.3\\ \\mathrm{lx}\\)\nCommon indoor task lighting | A few hundred lux\nOutdoor daylight under an overcast sky | Roughly \\(1{,}000\\)–\\(20{,}000\\ \\mathrm{lx}\\)\nStrong direct sunlight on a favorably oriented surface | Around \\(100{,}000\\ \\mathrm{lx}\\)\n\nThese are illustrative ranges, not fixed properties or prescribed lighting levels. Outdoor values depend on solar elevation, cloud cover, atmospheric conditions, and surface orientation. Indoor values depend on the lighting installation, daylight, and the measurement plane."
    },
    {
      "heading": "Applications and limitations",
      "text": "In architecture and lighting engineering, illuminance is used to characterize lighting on workplanes, circulation routes, display surfaces, and outdoor spaces. Assessment often includes average and minimum illuminance, spatial uniformity, and the contribution of daylight. Illuminance alone does not establish visual comfort: glare, shadows, contrast, and the directional distribution of light also matter.\n\nIn museums and cultural heritage conservation, both illuminance and exposure duration are relevant. Their time integral is luminous exposure:\n\n\\[H_v=\\int E_v(t)\\,\\mathrm{d}t.\\]\n\nIts SI unit is lux-second, although lux-hours are commonly used in conservation practice. Equal lux-hour exposures do not necessarily produce equal material damage, because deterioration also depends on the radiation spectrum and the material’s sensitivity.\n\nIlluminance is likewise useful in photographic lighting, equipment testing, and daylight monitoring. It is not, however, a general measure of light’s biological or chemical effectiveness. Photosynthesis, photochemical reactions, and nonvisual responses to light involve spectral weightings different from ordinary photopic vision. Two sources producing equal illuminance can therefore differ substantially in radiant power, photon flux, or effectiveness for a particular process."
    }
  ],
  "links": [
    "luminous-flux",
    "light",
    "international-system-of-units",
    "electromagnetic-radiation",
    "luminous-intensity",
    "semiconductor",
    "calibration",
    "metrological-traceability",
    "measurement-uncertainty",
    "architecture",
    "museum",
    "cultural-heritage",
    "photosynthesis"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}