{
  "id": "hydrofluoric-acid",
  "title": "Hydrofluoric Acid",
  "lang": "en",
  "source_lang": "en",
  "summary": "Hydrofluoric acid is aqueous hydrogen fluoride, distinguished by its glass-dissolving chemistry, industrial importance, and severe local and systemic toxicity.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Aqueous hydrogen fluoride",
    "Fluorhydric acid"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/hydrofluoric-acid/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/hydrofluoric-acid/",
      "json": "https://aiwiki.page/zh/hydrofluoric-acid.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Hydrofluoric acid is a solution of hydrogen fluoride, HF, in water. It is a colorless, corrosive liquid used to dissolve silicon-containing materials, process minerals and metals, and manufacture fluorine compounds. Although commonly described as a weak acid in dilute aqueous solution, it can produce severe chemical injury and life-threatening systemic poisoning. Its acid strength, corrosiveness, and toxicity are distinct properties and cannot be inferred from one another.\n\nThe chemistry of hydrofluoric acid combines the behavior of molecular HF with that of dissolved fluoride species. Strong hydrogen bonding, concentration-dependent ion association, and the formation of stable compounds with silicon and many metals give it properties unlike those of most familiar mineral acids. These properties explain both its usefulness in semiconductor fabrication and chemical manufacturing and its incompatibility with ordinary glass equipment.\n\nThe distinction between hydrofluoric acid and anhydrous hydrogen fluoride is important. The former is an aqueous mixture whose composition can vary; the latter is the essentially water-free compound, a volatile substance used extensively in industrial synthesis. Industrial terminology sometimes groups both under “HF,” but their phase behavior, materials compatibility, and process applications differ."
    },
    {
      "heading": "Composition, molecular structure, and physical properties",
      "text": "An isolated hydrogen fluoride molecule consists of one hydrogen atom bonded to one fluorine atom. Its molar mass is approximately \\(20.006\\ \\mathrm{g\\,mol^{-1}}\\). Fluorine’s high electronegativity produces a strongly polar H–F bond, with electron density displaced toward fluorine. The bond is unusually strong for a hydrogen halide, but bond strength alone does not determine how extensively HF dissociates in water: solvation, entropy, and interactions among dissolved species also contribute.\n\nHF molecules form extensive hydrogen bonds. In condensed hydrogen fluoride, these interactions produce associated structures rather than a liquid consisting solely of independent molecules. Hydrogen bonding explains why hydrogen fluoride has a much higher normal boiling point than hydrogen chloride, despite its lower molecular mass. Anhydrous HF boils at approximately \\(19.5\\,^\\circ\\mathrm{C}\\) at standard atmospheric pressure and freezes near \\(-83.6\\,^\\circ\\mathrm{C}\\). Consequently, whether anhydrous HF is encountered as a liquid or gas near room temperature depends strongly on temperature and containment pressure.\n\nAqueous hydrofluoric acid has no single boiling point or density because both depend on composition. Commercial concentrations are generally expressed as mass percentages: a 49% solution contains 49 units of HF mass per 100 units of solution mass. Such a specification is not interchangeable with molar concentration, which also requires the solution density. Grades near 49% and 70% HF are widely encountered, alongside more dilute formulated products and high-purity solutions prepared for electronics manufacturing.\n\nThe HF–water system forms a maximum-boiling azeotrope at atmospheric pressure, containing about 38% HF by mass and boiling at approximately \\(112\\,^\\circ\\mathrm{C}\\). At the azeotropic composition, the equilibrium vapor and liquid have the same overall composition. Ordinary distillation therefore cannot separate the mixture through that composition in a single conventional separation sequence. This behavior is one reason why commercial anhydrous HF is normally obtained directly from industrial production and purification rather than simply by distilling an arbitrary aqueous acid solution.\n\nConcentrated acid may fume in moist air as escaping HF interacts with atmospheric water to form an acid-containing mist. The visible cloud is an aerosol, not a direct image of individual HF molecules. Its visibility depends on humidity and mixing conditions, so appearance does not reliably indicate airborne concentration. Likewise, the familiar description “colorless liquid” refers to the uncontaminated product; dissolved metals and other impurities can change the appearance of process solutions."
    },
    {
      "heading": "Acidity, dissociation, and dissolved species",
      "text": "In dilute aqueous solution, hydrogen fluoride participates in the acid–base equilibrium\n\n\\[\\mathrm{HF + H_2O \\rightleftharpoons H_3O^+ + F^-}.\\]\n\nNear \\(25\\,^\\circ\\mathrm{C}\\), its conventional aqueous acid-dissociation constant is approximately \\(6.8\\times10^{-4}\\), corresponding to a \\(\\mathrm{p}K_\\mathrm{a}\\) near 3.17. These values identify HF as a weak acid relative to hydrogen chloride, hydrogen bromide, and hydrogen iodide, which are extensively dissociated in dilute water. “Weak” here means incomplete dissociation under specified conditions; it does not mean noncorrosive, minimally reactive, or safe.\n\nFor a sufficiently dilute solution treated approximately as ideal, the dissociation can be represented by\n\n\\[K_\\mathrm{a} = \\frac{a_{\\mathrm{H_3O^+}}a_{\\mathrm{F^-}}} {a_{\\mathrm{HF}}},\\]\n\nwhere \\(a\\) denotes thermodynamic activity. Replacing activities with concentrations can be useful at low ionic strength, but it becomes progressively less accurate as concentration increases. Activity coefficients, changing solvent properties, and additional equilibria matter in concentrated hydrofluoric acid. A calculation based only on the dilute-solution dissociation constant cannot describe commercial concentrated acid adequately.\n\nA particularly important additional species is the bifluoride ion, \\(\\mathrm{HF_2^-}\\), formed through association between fluoride and HF:\n\n\\[\\mathrm{F^- + HF \\rightleftharpoons HF_2^-}.\\]\n\nThe ion contains a strong hydrogen bond joining two fluorine centers. Its formation means that total dissolved fluorine is not equivalent to free fluoride concentration. Other associated species become relevant as the proportion of HF increases, and a concentrated solution is better understood as an interacting mixture of molecules and ions than as an ideal solution containing only HF, hydronium, and fluoride.\n\nThis distinction also affects the interpretation of pH. The pH scale describes hydrogen-ion activity, not the total amount of HF, the capacity to dissolve silica, or the potential for fluoride poisoning. Two solutions with comparable pH can have very different chemical behavior if one contains HF and the other contains an acid whose anion does not form similar complexes. Conversely, adding a fluoride salt to HF changes its chemical speciation and buffering behavior without simply reproducing the effect of adding more strong acid.\n\nWater content also distinguishes hydrofluoric acid from anhydrous HF used as a reaction medium. Liquid hydrogen fluoride has its own solvent-dependent acid–base chemistry, including self-ionization commonly represented as\n\n\\[\\mathrm{3HF \\rightleftharpoons H_2F^+ + HF_2^-}.\\]\n\nAcidity comparisons made in water cannot be transferred unchanged to this medium. Mixtures of HF with powerful fluoride acceptors can form superacid systems, but those mixtures are chemically distinct from ordinary aqueous hydrofluoric acid."
    },
    {
      "heading": "Reactions with silica, metals, and mineral solids",
      "text": "The most characteristic reaction of hydrofluoric acid is its attack on silica, \\(\\mathrm{SiO_2}\\), the principal network-forming component of many glasses. A simplified equation is\n\n\\[\\mathrm{SiO_2 + 4HF \\rightarrow SiF_4 + 2H_2O}.\\]\n\nIn aqueous solutions containing sufficient fluoride and HF, silicon can instead be represented in the overall product as hexafluorosilicate:\n\n\\[\\mathrm{SiO_2 + 6HF \\rightarrow H_2SiF_6 + 2H_2O}.\\]\n\nThese equations describe different useful limiting representations rather than a universal sequence of isolated steps. Actual speciation depends on water content, acidity, fluoride availability, and whether volatile silicon tetrafluoride escapes or reacts further.\n\nThe driving force includes the stability of silicon–fluorine bonding and fluorosilicate species. By breaking the silicon–oxygen network and transferring silicon into soluble or volatile products, HF attacks materials that resist many other acids. Ordinary glass, fused silica, and numerous silicate minerals are therefore susceptible. Glass composition matters: constituents such as calcium, aluminum, sodium, and boron introduce additional reaction products and can alter the rate, surface texture, and completeness of dissolution.\n\nReactions with metal oxides combine proton-assisted disruption of the oxide lattice with fluoride complex formation. For a simple divalent oxide, an overall equation may be written\n\n\\[\\mathrm{MO + 2HF \\rightarrow MF_2 + H_2O}.\\]\n\nWhether the product remains on the surface or enters solution depends on its solubility and on further complexation. Calcium fluoride is sparingly soluble, whereas some metals form soluble fluorocomplexes in excess fluoride. Aluminum and zirconium provide important examples of elements whose solution chemistry is strongly affected by fluoride coordination.\n\nMetallic materials show correspondingly varied behavior. Acid attack on a metal can release hydrogen, while fluoride-containing films may slow further reaction under particular conditions. Some steels are used industrially with anhydrous HF because protective surface films can form. This compatibility is conditional: changes in water content, temperature, oxygen exposure, impurities, or flow can change the corrosion rate substantially. A material suitable for one HF service is not automatically suitable for another.\n\nHF is not primarily an oxidizing acid. Reactions that require oxidation often use it together with an oxidant. In silicon processing, for example, an oxidizing component can convert silicon into an oxidized surface species that fluoride chemistry then removes. Similar complementarity appears in mixed-acid digestion of minerals. The reaction pathway therefore depends on the complete formulation, not merely on the presence of HF, and may involve oxidation–reduction, complexation, precipitation, and gas evolution simultaneously."
    },
    {
      "heading": "Historical recognition and development",
      "text": "Knowledge of hydrofluoric acid emerged from work with fluorite, the mineral calcium fluoride, long before fluorine itself was isolated. Fluorite was used as a flux in metallurgy, where it helped molten materials flow. Its unusual behavior when treated with strong acids attracted attention because the products damaged glass. Historical accounts associate Heinrich Schwanhard with glass etching using fluorite-derived material around 1670, although early procedures did not distinguish the chemical species in modern terms.\n\nIn 1771, the Swedish chemist Carl Wilhelm Scheele investigated fluorite and the acidic material produced from it. His work established hydrofluoric acid as a distinct chemical subject and connected its preparation with the reaction of fluorite and sulfuric acid. The tendency of the product to attack glass was both evidence of its unusual chemistry and a practical obstacle to collecting and characterizing it. Investigators needed containers and experimental arrangements different from those used for many other acids.\n\nFor much of the following century, the relationship between hydrofluoric acid, hydrogen, and fluorine remained entangled with attempts to isolate the unknown element. Chemical decomposition was difficult because fluorine compounds were stable and reactive products attacked apparatus. Electrolysis of aqueous mixtures did not simply yield elemental fluorine: water and the newly formed species introduced competing reactions. These difficulties illustrate why identifying a compound and isolating each of its elements are separate scientific achievements.\n\nIn 1886, Henri Moissan isolated fluorine by electrolysis of a conducting mixture containing potassium hydrogen fluoride in anhydrous hydrogen fluoride. The work required apparatus and temperature control compatible with the unusually reactive system. It established elemental fluorine experimentally and helped clarify the place of HF within fluorine chemistry. Moissan received the 1906 Nobel Prize in Chemistry for his investigation and isolation of fluorine and for work involving the electric furnace.\n\nDuring the twentieth century, HF production expanded beyond glass etching and laboratory chemistry. Aluminum metallurgy, petroleum refining, fluorocarbon manufacture, and nuclear fuel processing became major industrial outlets. The growth of microelectronics subsequently created a distinct market for aqueous HF with extremely low metal and particle contamination. In this setting, chemical purity became as important as bulk concentration.\n\nThe history also changed the interpretation of injury. The severe effects of HF exposure came to be understood as more than ordinary acid burns: fluoride absorption can disrupt calcium and magnesium balance and interfere with cellular function. Modern descriptions consequently separate acid dissociation strength from toxicological severity. That distinction is central to the compound’s scientific identity, rather than merely an addition to its industrial history."
    },
    {
      "heading": "Industrial manufacture and product grades",
      "text": "The principal industrial route to hydrogen fluoride is the reaction of acid-grade fluorspar with sulfuric acid:\n\n\\[\\mathrm{CaF_2 + H_2SO_4 \\rightarrow 2HF + CaSO_4}.\\]\n\nThe calcium fluoride provides fluorine, while sulfuric acid converts it into volatile HF and leaves calcium sulfate as a major solid coproduct. Industrial plants use heated reaction equipment that mixes the reacting materials and separates the evolved gas from solids. The process is a bulk chemical operation, distinct from preparing small quantities of an aqueous laboratory reagent.\n\nThe mineral feed is usually beneficiated to raise its calcium fluoride content and reduce components that consume acid or introduce contaminants. Carbonate impurities consume acid and release carbon dioxide; silica can generate silicon-containing fluorides. The composition of the ore therefore affects acid consumption, gas treatment, product purity, and residue characteristics. The commercial term “acid-grade fluorspar” refers to a high-purity mineral concentrate, not to a solution of hydrofluoric acid.\n\nCrude HF-containing gas undergoes purification to remove entrained material and volatile impurities, followed by condensation and separation operations. Anhydrous HF is itself an important commercial product. Aqueous grades are produced through controlled absorption or formulation with water, accompanied by heat removal because mixing HF and water releases heat. Manufacturing descriptions must distinguish production of the HF molecule from adjustment of the final solution concentration.\n\nThere are also industrial routes connected with fluorosilicic acid recovered from phosphate processing. Phosphate rock commonly contains fluorine, and acid treatment can release fluorine compounds that are captured in scrubbing systems. Converting this fluorine resource into HF involves additional chemical separation and purification. Its significance is that fluorine supply is not limited absolutely to freshly mined fluorspar, although feedstock composition and product-quality requirements determine the practicality of a particular route.\n\nCommercial grades differ in more than HF percentage. Technical material may be suitable for mineral processing or chemical synthesis, whereas analytical and electronic grades impose much stricter limits on metallic contaminants and other impurities. In semiconductor production, traces of sodium, iron, copper, or particles can alter electrical behavior or reduce manufacturing yield even when the acid’s bulk chemistry is otherwise correct.\n\nQuality control therefore combines concentration measurements with impurity-specific analytical methods. Acid–base titration can help establish total acidity under defined conditions but does not by itself characterize all impurities or resolve every fluoride species. Mass spectrometry, ion chromatography, and other specialized techniques are used according to the specification. Sampling vessels and analytical components must themselves be compatible with HF; contamination or dissolution from ordinary laboratory materials can compromise the result."
    },
    {
      "heading": "Glass treatment, semiconductor fabrication, and analysis",
      "text": "Hydrofluoric acid’s ability to remove silica underlies glass etching, frosting, and surface modification. Selective exposure through a resistant pattern can produce markings or textured areas, while broader treatment can change optical appearance. The final surface depends on glass composition, reagent formulation, reaction time, and the formation or removal of insoluble products. Etching is therefore not simply uniform “dissolving”: different glass constituents can react at different rates and leave distinct microscopic textures.\n\nIn semiconductor manufacturing, HF is especially important for removing silicon dioxide from silicon. A thin native oxide forms when silicon is exposed to oxidizing environments. Removing that oxide can be necessary before subsequent deposition, bonding, or surface modification. HF treatment can leave a hydrogen-terminated silicon surface under suitable conditions, changing its surface chemistry and initially reducing its affinity for water. The surface does not remain unchanged indefinitely after exposure to air.\n\nBuffered oxide etchants commonly combine HF with ammonium fluoride. Their behavior reflects control of fluoride availability and solution equilibria, not merely dilution of a strong acid. Oxide composition and structure also matter: thermally grown silicon dioxide, deposited oxide, and doped oxide can exhibit different etch rates. Selectivity—the ratio of removal rates for different materials—is a central process parameter because neighboring structures must retain their intended dimensions.\n\nLiquid-phase and vapor-phase HF processes serve different manufacturing purposes. Vapor HF is used in some microelectromechanical-system fabrication to remove sacrificial oxide layers. Avoiding a conventional liquid drying stage can reduce capillary forces that would otherwise pull small structures together, a failure known as stiction. Such processes still depend on surface chemistry and water availability; “vapor etching” does not imply that water is chemically irrelevant.\n\nIn geochemistry and materials analysis, HF is used to decompose silicate-rich samples that resist other mineral acids. Breaking the silicate framework releases elements for subsequent measurement. However, digestion can introduce analytical complications: volatile fluorides may cause loss of some elements, and poorly soluble fluorides can retain others in solid residues. A clear solution is not by itself proof that every analyte has been quantitatively recovered.\n\nHF also appears in surface preparation for microscopy and specialized geological investigations. Its action can expose microstructures or separate resistant components from a mineral matrix. These applications require interpretation of what the reagent removes preferentially. An etched surface records both the original material and the selectivity of the chemical treatment, so observed patterns cannot automatically be assumed to reproduce an untreated surface without alteration."
    },
    {
      "heading": "Fluorochemical synthesis, metallurgy, and fuel processing",
      "text": "Hydrogen fluoride is a foundational feedstock for fluorine chemistry. Reactions involving HF supply fluoride to inorganic compounds and introduce fluorine into organic molecules. Much of this industrial use involves anhydrous HF rather than aqueous hydrofluoric acid, because water changes reaction equilibria, catalyst behavior, and product separation. Grouping all applications under “hydrofluoric acid” can therefore obscure a technically important distinction.\n\nIn organic chemistry, HF participates in fluorination processes in which other functional groups or halogens are replaced or transformed under appropriate catalytic conditions. Industrial production of numerous fluorocarbons has relied on such chemistry. The presence of strong carbon–fluorine bonds gives many products distinctive thermal, chemical, and surface properties, but those properties vary greatly among refrigerants, polymers, pharmaceuticals, and other fluorinated substances. They cannot be inferred from fluorine content alone.\n\nAnhydrous HF is also used as a catalyst in petroleum alkylation. In this process, isobutane reacts with light olefins to produce branched hydrocarbons suitable for gasoline blending. The acid promotes ionic reaction pathways, including carbocation chemistry, and is separated and recycled within the process. Its function is catalytic rather than that of a stoichiometric fluorinating reagent; the desired hydrocarbon product is not intentionally a fluorinated fuel.\n\nIn aluminum production, fluorine compounds help establish the properties of the molten electrolyte used to reduce alumina. Aluminum fluoride is an important product of HF-based chemistry, and cryolite, \\(\\mathrm{Na_3AlF_6}\\), is central to conventional aluminum smelting electrolytes. These materials lower the operating temperature relative to melting pure alumina and influence electrolyte composition, conductivity, and alumina solubility. HF’s role is chiefly upstream in manufacturing or adjusting fluoride materials, rather than acting as the aqueous medium inside the smelting cell.\n\nHF is used in metal treatment because it can dissolve oxide scales that other acids remove less effectively. Mixtures containing nitric acid and HF are associated with stainless-steel pickling, while fluoride complexation is important in processing titanium and other oxide-forming metals. The oxidizing component and the fluoride-containing component perform different chemical functions. Changes in formulation can alter both oxide removal and attack on the underlying metal.\n\nNuclear fuel processing provides another major example. Hydrogen fluoride is used to convert uranium oxides into uranium tetrafluoride, \\(\\mathrm{UF_4}\\), an intermediate in several fuel-cycle routes. Further fluorination can produce uranium hexafluoride, \\(\\mathrm{UF_6}\\), whose volatility enables enrichment processes based on isotope separation. HF treatment and the conversion to hexafluoride are distinct chemical stages; hydrofluoric acid alone is not equivalent to the complete fluorination process."
    },
    {
      "heading": "Biological effects and exposure hazards",
      "text": "Hydrofluoric acid causes injury through both local chemical action and the biological effects of absorbed fluoride. Undissociated HF can penetrate tissue, after which dissociation and fluoride interactions contribute to deeper injury. Consequently, the severity of an exposure is not determined solely by the measured surface acidity. Concentration, exposed area, duration of contact, route of exposure, and the amount absorbed all influence the clinical outcome.\n\nFluoride interacts strongly with calcium and magnesium and can disturb their physiologically available concentrations. Significant absorption may produce hypocalcemia and hypomagnesemia, while potassium disturbances can also occur. Calcium and potassium are central to the electrical behavior of cardiac and other excitable cells; disruption can therefore cause dangerous cardiac arrhythmias. Severe poisoning is a systemic electrolyte disorder as well as a localized chemical burn.\n\nPain and visible injury do not always develop together. Concentrated exposures may cause prompt pain and tissue damage, whereas symptoms after more dilute skin exposure can be delayed. A relatively inconspicuous initial appearance does not establish a minor exposure. Damage can extend beneath the surface, and the relationship between visible burn area and systemic absorption is not a simple one-to-one correlation.\n\nEye exposure can injure the cornea and other ocular structures. Inhalation of HF gas or acid mist can damage respiratory tissues and, in severe cases, lead to pulmonary edema. Ingestion can combine corrosive gastrointestinal injury with systemic fluoride poisoning. The same substance thus presents different patterns of injury depending on how it enters the body. Gas-phase HF and an aqueous splash are not interchangeable exposure scenarios, even though both can deliver fluoride.\n\nAt the cellular level, fluoride can affect enzymes and pathways of metabolism, while changes in extracellular calcium and other electrolytes alter membrane function. No single molecular interaction accounts for every manifestation of severe poisoning. Toxicological descriptions therefore distinguish direct tissue injury, electrolyte disturbances, cardiovascular effects, and respiratory injury rather than attributing all damage to “acid burning.”\n\nClinical management of HF exposure differs from management of uncomplicated exposure to many other acids. Published medical protocols include calcium-based treatment intended to bind fluoride, together with assessment of tissue injury and, where indicated, monitoring of electrolytes and cardiac rhythm. The route and intensity of treatment depend on the exposure and clinical findings. These specialized practices reflect the underlying chemistry: correcting surface acidity alone does not necessarily address absorbed fluoride or its systemic effects."
    },
    {
      "heading": "Containment, environmental behavior, and waste treatment",
      "text": "HF containment depends on chemical composition, temperature, pressure, and mechanical conditions. Glass is unsuitable because its silica network reacts with HF. Selected polyethylene and fluoropolymer components are used in many aqueous-acid applications, while particular metallic systems are used for some anhydrous-HF services. No material is universally compatible across all concentrations and temperatures. Linings, seals, joints, and instruments must be considered separately from the main vessel because failure can begin in a small component.\n\nIndustrial risk control combines enclosed equipment, corrosion management, ventilation or gas capture, detection systems, and provisions for treating releases. HF’s low boiling point in anhydrous form and the mist-forming behavior of aqueous acid complicate release modeling. A loss of containment can involve vapor, droplets, and interactions with atmospheric moisture, rather than a single ideal gas cloud. Process water and impurities can also change equipment behavior, making composition control relevant to mechanical integrity.\n\nIn the environment, HF does not retain a fixed identity independent of its surroundings. Dissolution and chemical equilibria redistribute fluorine among HF, fluoride ions, and complexes. At near-neutral pH, dissolved inorganic fluorine is predominantly fluoride rather than molecular HF. In strongly acidic water, the proportion of HF rises. The environmental consequences of a release therefore depend on acidity, dilution, buffering, mineral composition, and the presence of metals such as calcium and aluminum.\n\nFluoride can be removed from water through precipitation and interactions with solid surfaces. A common treatment principle is formation of sparingly soluble calcium fluoride:\n\n\\[\\mathrm{Ca^{2+} + 2F^- \\rightleftharpoons CaF_2(s)}.\\]\n\nHowever, precipitation does not imply complete removal. Residual dissolved fluoride depends on solubility equilibria, ionic strength, complexation, and the efficiency of separating the resulting solids. Neutralizing acidity and removing fluoride are related but distinct objectives: a solution can reach a near-neutral pH while still containing substantial dissolved fluoride.\n\nAdsorption onto aluminum- and iron-bearing solids, ion exchange, and membrane-based separations can also be relevant to fluoride treatment. Their suitability depends on the composition and volume of the waste stream. Silica, phosphate, competing anions, and dissolved metals can affect performance. Waste from semiconductor fabrication may differ substantially from mineral-processing effluent even when both contain fluoride, because the accompanying acids, solvents, and particulate materials differ.\n\nEnvironmental measurements likewise distinguish gaseous HF, particulate fluoride, dissolved fluoride, and total fluorine. These categories answer different questions about exposure and transport. Fluoride can migrate in groundwater or be retained by mineral reactions, while atmospheric HF can deposit onto vegetation and soil. Some elevated environmental fluoride concentrations arise naturally from mineral weathering or volcanic activity, so attribution to a particular industrial source requires information about local geology, background concentrations, and the chemical and spatial pattern of the release."
    }
  ],
  "links": [
    "water",
    "molecule",
    "molar-mass",
    "electronegativity",
    "hydrogen-bond",
    "pressure",
    "molar-concentration",
    "azeotrope",
    "distillation",
    "acid-base-reaction",
    "thermodynamic-activity",
    "activity-coefficient",
    "ph",
    "coordination-chemistry",
    "hydrogen",
    "redox-reaction",
    "electrolysis",
    "nobel-prize-in-chemistry",
    "analytical-chemistry",
    "mass-spectrometry",
    "semiconductor",
    "silicon",
    "organic-chemistry",
    "catalysis",
    "isotope",
    "enzyme",
    "metabolism",
    "chemical-equilibrium",
    "adsorption",
    "groundwater"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}