{
  "id": "hydrate",
  "title": "Hydrate (crystalline water)",
  "lang": "en",
  "source_lang": "en",
  "summary": "A hydrate is a crystalline substance containing water as an integral part of its solid structure, often in a characteristic ratio to the other components.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Crystalline hydrate"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/hydrate/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/hydrate/",
      "json": "https://aiwiki.page/zh/hydrate.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A hydrate is a crystalline substance in which water molecules are incorporated into the solid structure rather than merely adhering to its surface or occupying spaces between particles. Many hydrates contain a definite number of water molecules per formula unit, conventionally written with a centered dot, as in copper(II) sulfate pentahydrate, \\(\\mathrm{CuSO_4\\cdot5H_2O}\\). This incorporated water is called water of crystallization or water of hydration. Hydrates include numerous inorganic salts, minerals, and organic crystalline compounds; in a broader structural sense, they also include water frameworks that enclose guest molecules."
    },
    {
      "heading": "Composition and terminology",
      "text": "A hydrate is a special type of solvate, a crystalline phase containing molecules of a solvent within its structure. In a hydrate, that solvent is water. The corresponding water-free substance is described as anhydrous, although removing water does not always leave an otherwise unchanged crystal structure.\n\nFor a stoichiometric hydrate, the general formula is\n\n\\[\\mathrm{A\\cdot nH_2O},\\]\n\nwhere \\(\\mathrm{A}\\) represents the non-water component and \\(n\\) gives the number of water molecules per formula unit. Names commonly use prefixes such as monohydrate, dihydrate, hexahydrate, and decahydrate. Fractional values are also possible: calcium sulfate hemihydrate is written \\(\\mathrm{CaSO_4\\cdot\\tfrac12H_2O}\\), equivalent to one water molecule for every two calcium sulfate units.\n\nThe dot notation expresses composition, not a complete description of chemical bonding. It does not specify which water molecules bind directly to metal centers, which occupy cavities, or how they interact with neighboring components.\n\nSome hydrates are nonstoichiometric: their water content can vary over a range while the material retains the same basic structural framework. This behavior commonly involves partially occupied water sites or channels. Such materials cannot always be described adequately by a single fixed integer value of \\(n\\).\n\nThe term hydrate also has other uses in organic chemistry, including compounds formed by adding water across a chemical bond. Those products are chemically distinct from the crystalline hydrates considered here."
    },
    {
      "heading": "Structural roles of water",
      "text": "Water can occupy several different environments within a hydrate, and more than one may occur in the same crystal.\n\nCoordinated water\n\nWater molecules can bind directly to a metal ion through an oxygen atom, acting as ligands. Their number and arrangement form part of the metal’s coordination environment, a central subject of coordination chemistry.\n\nIn copper(II) sulfate pentahydrate, four water molecules occupy positions close to copper in its coordination environment, while the fifth has a different structural role within the hydrogen-bonded network. The familiar formula therefore does not mean that all five water molecules are equivalent.\n\nLattice water\n\nWater can also occupy positions between other structural units without directly coordinating a metal. Such molecules often connect ions or molecules through hydrogen bonds, helping stabilize the crystal packing.\n\nThe distinction between coordinated and lattice water is useful, but it does not by itself establish a universal order of removal. Dehydration depends on the entire structure, the stability of possible products, and the conditions under which water is lost.\n\nChannel and cavity water\n\nSome crystals contain channels, layers, or cavities that accommodate water. Their occupancy may change with humidity. Water removal can preserve the framework, cause it to contract, or trigger a transformation into a different structure.\n\nClathrate water frameworks\n\nIn a clathrate hydrate, hydrogen-bonded water molecules form cages around guest molecules such as methane or carbon dioxide. Unlike a typical salt hydrate, the water framework acts as the host structure.\n\nClathrates generally have variable cage occupancy, so their composition is not necessarily a simple fixed ratio of guest molecules to water. Methane hydrates occur in suitable marine sediments and beneath some permafrost regions, where temperature and pressure favor their stability."
    },
    {
      "heading": "Representative hydrates",
      "text": "Common examples illustrate the range of compositions and uses.\n\nHydrate | Formula | Characteristic significance\nCopper(II) sulfate pentahydrate | \\(\\mathrm{CuSO_4\\cdot5H_2O}\\) | Blue crystalline salt widely used to illustrate hydration and dehydration\nSodium carbonate decahydrate | \\(\\mathrm{Na_2CO_3\\cdot10H_2O}\\) | Commonly called washing soda\nMagnesium sulfate heptahydrate | \\(\\mathrm{MgSO_4\\cdot7H_2O}\\) | Commonly called Epsom salt\nCalcium sulfate dihydrate | \\(\\mathrm{CaSO_4\\cdot2H_2O}\\) | The mineral [[gypsum\nCalcium sulfate hemihydrate | \\(\\mathrm{CaSO_4\\cdot\\tfrac12H_2O}\\) | Principal reactive component of plaster of Paris\nSodium sulfate decahydrate | \\(\\mathrm{Na_2SO_4\\cdot10H_2O}\\) | Commonly called Glauber’s salt\n\nOne chemical substance may form several hydrates with different water contents. These are distinct solid phases, not simply wetter or drier samples of one material. Their stability depends on environmental conditions."
    },
    {
      "heading": "Formation and stability",
      "text": "Hydrates often form when substances crystallize from aqueous solution. Whether a hydrate or an anhydrous phase appears depends on solution composition, temperature, pressure, and the availability of water.\n\nA simplified dehydration equilibrium is\n\n\\[\\mathrm{A\\cdot nH_2O(s)\\rightleftharpoons A(s)+nH_2O(g)}.\\]\n\nAt a fixed temperature, coexistence of the two pure solid phases corresponds to a particular equilibrium water-vapor pressure, provided no competing phases intervene. Below that pressure, dehydration is favored; above it, hydration is favored. At higher water availability, dissolution or formation of another hydrate may become relevant.\n\nMore generally, stability is governed by Gibbs free energy and the chemical potential of water. In solutions and nonideal systems, water activity is more informative than water concentration alone.\n\nActual transformations may lag behind equilibrium because of barriers to nucleation, structural rearrangement, or water transport. A hydrate can therefore persist under conditions where another phase is thermodynamically favored. Particle size, defects, and previous heating or drying can affect the observed rate and pathway.\n\nEfflorescence and deliquescence\n\nEfflorescence is the loss of water of crystallization on exposure to an atmosphere sufficiently dry relative to the hydrate’s equilibrium conditions. It may leave a powdery coating of a lower hydrate or anhydrous material.\n\nDeliquescence is different: a solid absorbs atmospheric water until it dissolves in the absorbed water. A substance may pass through hydration steps before deliquescing, but formation of a hydrate and formation of a liquid solution are not the same process."
    },
    {
      "heading": "Dehydration and rehydration",
      "text": "Heating frequently causes hydrates to lose water, sometimes through several intermediate phases. Dehydration may alter color, density, mechanical strength, and crystal structure.\n\nIt is not always a simple process in which water molecules leave an otherwise unchanged lattice. Possible outcomes include:\n\n- formation of a lower hydrate;\n- rearrangement into an anhydrous crystal structure;\n- collapse into a poorly crystalline or amorphous solid;\n- dissolution in released water followed by recrystallization;\n- chemical decomposition alongside water loss.\n\nSome transformations are reversible when water is restored; others require dissolution and recrystallization or do not readily reverse.\n\nThe conversion between gypsum and calcium sulfate hemihydrate is an important practical example. Controlled heating partially removes gypsum’s structural water. When the resulting plaster is mixed with water, gypsum forms again, and the growth and interlocking of crystals produce a hardened mass."
    },
    {
      "heading": "Identification and measurement",
      "text": "Hydrates are characterized by combining structural, compositional, and thermal methods.\n\nX-ray diffraction identifies crystalline phases and reveals changes in their structures during hydration or dehydration. It can often locate oxygen atoms belonging to water, although hydrogen positions are generally more difficult to determine accurately by ordinary X-ray methods.\n\nThermogravimetric analysis measures changes in sample mass during controlled heating or exposure to a selected atmosphere. Water-loss steps can help determine hydrate composition, but other volatile products or overlapping decomposition reactions can complicate interpretation.\n\nCalorimetry measures thermal effects associated with dehydration, crystallization, and related transitions. Infrared spectroscopy provides information about water vibrations and hydrogen-bonding environments.\n\nIf a pure hydrate loses only water and leaves a residue of known composition, its hydration number can be calculated as\n\n\\[n= \\frac{m_{\\mathrm{water}}/M_{\\mathrm{H_2O}}} {m_{\\mathrm{residue}}/M_{\\mathrm{A}}},\\]\n\nwhere \\(m\\) denotes mass and \\(M\\) denotes molar mass. This calculation is unreliable if dehydration is incomplete, the residue decomposes, or surface moisture contributes significantly to the measured loss."
    },
    {
      "heading": "Applications and practical significance",
      "text": "Hydrate formation matters in chemical manufacture because it changes formula mass, composition, and handling behavior. Equal masses of an anhydrous salt and one of its hydrates contain different amounts of the non-water component, making the specified solid form important in quantitative preparation and analysis.\n\nHydration state also affects the storage and processing of crystalline products. Changes in atmospheric humidity can cause caking, cracking, phase conversion, or dissolution. In pharmaceutical solids, hydrate formation can alter properties such as dissolution behavior and physical stability.\n\nReversible hydration and dehydration are investigated for thermal-energy storage. Such systems store or release energy through transformations between hydrated and less hydrated phases. Their performance depends not only on reaction enthalpy but also on cycling stability, water transport, and control of unwanted liquid phases.\n\nGas hydrates have a separate engineering significance. Their formation can obstruct pipelines carrying water and suitable gases under hydrate-forming conditions. Naturally occurring methane hydrates are also studied as geological carbon reservoirs and potential energy resources."
    },
    {
      "heading": "Distinction from other forms of water in solids",
      "text": "Not all water associated with a solid is water of crystallization.\n\n- Adsorbed water is held at surfaces through adsorption and need not be part of the bulk crystal structure.\n- Pore water occupies voids between grains or within a porous material.\n- Water in solution surrounds dissolved species but does not constitute a crystalline hydrate.\n- Hydroxyl groups contain chemically bound \\(\\mathrm{OH}\\) units rather than intact water molecules. A hydroxide is not automatically a hydrate.\n- Water released by decomposition may form through reactions between structural groups rather than leave as pre-existing molecular water.\n\nConsequently, detecting water loss alone does not establish that a material is a crystalline hydrate. Composition, structure, and the mechanism of water release must be considered together."
    }
  ],
  "links": [
    "water",
    "solvent",
    "chemical-bond",
    "organic-chemistry",
    "ion",
    "ligand",
    "coordination-chemistry",
    "hydrogen-bond",
    "methane",
    "carbon-dioxide",
    "temperature",
    "pressure",
    "gibbs-free-energy",
    "chemical-potential",
    "thermodynamic-activity",
    "thermogravimetric-analysis",
    "calorimetry",
    "infrared-spectroscopy",
    "molar-mass",
    "adsorption"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}