{
  "id": "horsepower",
  "title": "Horsepower",
  "lang": "en",
  "source_lang": "en",
  "summary": "Horsepower is a family of non-SI units of power, originating in comparisons between steam engines and working horses and still used to rate engines and motors.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Horse power",
    "hp"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/horsepower/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/horsepower/",
      "json": "https://aiwiki.page/zh/horsepower.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Horsepower is a family of units of power, the rate at which work is done or energy is transferred. It originated as a practical way of comparing machinery with the output of working horses. The most widely used forms are mechanical horsepower, equal to approximately 745.7 watts, and metric horsepower, equal to exactly 735.49875 watts. Horsepower remains common in engine, vehicle, and motor specifications, although the International System of Units (SI) uses the watt."
    },
    {
      "heading": "Origin and historical development",
      "text": "The modern convention for horsepower is associated with James Watt, who used it in the late eighteenth century to describe the capacity of his steam engines in terms familiar to customers who otherwise relied on animal labor.\n\nWatt’s convention became 33,000 foot-pounds of work per minute, equivalent to 550 foot-pounds per second. In this expression, “pound” means pound-force, not a unit of mass. A machine delivering one mechanical horsepower could therefore, ideally, lift a 550-pound-force load vertically at one foot per second.\n\nThis was a commercial engineering benchmark rather than a universal biological measurement. A horse’s actual power output varies with the animal, the task, and the duration of exertion. A horse can briefly exceed one horsepower; the unit should not be interpreted as the maximum output of a single animal.\n\nAs industrial technology spread, different definitions developed for different measurement systems and applications. Consequently, the word horsepower alone does not always identify an exact quantity."
    },
    {
      "heading": "Definitions and conversion factors",
      "text": "Several definitions remain relevant in engineering and historical records.\n\nForm | Definition or convention | Equivalent in watts\nMechanical horsepower | 550 foot-pounds-force per second | 745.69987158227022 W, exactly\nMetric horsepower | 75 kilogram-force metres per second | 735.49875 W, exactly\nElectrical horsepower | A convention used in some electrical equipment ratings | 746 W\nBoiler horsepower | A standardized steam-generating heat rate | Approximately 9,809.5 W\n\nMechanical horsepower\n\nMechanical horsepower, also called imperial horsepower, is based on the international foot and pound together with standard gravitational acceleration. Its exact conversion follows from those definitions:\n\n\\[1\\ \\mathrm{hp} =550\\ \\mathrm{ft}\\cdot\\mathrm{lbf}/\\mathrm{s} =745.69987158227022\\ \\mathrm{W}.\\]\n\nFor most practical calculations, \\(1\\ \\mathrm{hp}\\approx0.7457\\ \\mathrm{kW}\\).\n\nMetric horsepower\n\nMetric horsepower is the power required to raise a mass of 75 kilograms vertically at one metre per second under standard gravity. Since kilogram-force is defined using \\(9.80665\\ \\mathrm{m/s^2}\\),\n\n\\[1\\ \\text{metric horsepower} =75\\times9.80665\\ \\mathrm{W} =735.49875\\ \\mathrm{W}.\\]\n\nCommon designations include PS, CV, and ch, depending on language and national practice. These abbreviations should be interpreted in context, particularly because similar terms can also occur in tax classifications.\n\nMetric horsepower is about 1.37% smaller than mechanical horsepower. Thus a power of 100 kW corresponds to approximately 134.1 mechanical horsepower or 136.0 metric horsepower.\n\nElectrical and boiler horsepower\n\nElectrical horsepower is conventionally taken as 746 W in some equipment-rating systems. For a motor, a horsepower rating normally describes mechanical output rather than electrical input. Input power is greater because some energy is lost through winding resistance, friction, and other processes.\n\nBoiler horsepower measures thermal capacity rather than mechanical shaft output. It is conventionally associated with evaporating 34.5 pounds of water per hour “from and at” 212 °F: converting water already at its atmospheric boiling point into steam at the same temperature. Its much larger watt equivalent reflects a different historical definition, not a more powerful form of the mechanical unit."
    },
    {
      "heading": "Physical meaning",
      "text": "Power is the rate of doing work:\n\n\\[P=\\frac{dW}{dt}.\\]\n\nThe SI watt equals one joule per second. Horsepower therefore measures the same physical quantity as watts, not force, energy, or speed.\n\nFor a force acting along the direction of motion,\n\n\\[P=Fv,\\]\n\nwhere \\(F\\) is force and \\(v\\) is velocity. For a rotating shaft,\n\n\\[P=\\tau\\omega,\\]\n\nwhere \\(\\tau\\) is torque and \\(\\omega\\) is angular velocity.\n\nIf torque is measured in newton-metres and rotational speed \\(n\\) in revolutions per minute,\n\n\\[P\\;(\\mathrm{kW}) =\\frac{\\tau\\;(\\mathrm{N\\,m})\\,n\\;(\\mathrm{rpm})}{9549.3}.\\]\n\nFor mechanical horsepower and torque in pound-feet, the corresponding numerical relationship is\n\n\\[P\\;(\\mathrm{hp}) \\approx\\frac{\\tau\\;(\\mathrm{lbf\\,ft})\\,n\\;(\\mathrm{rpm})}{5252}.\\]\n\nThe familiar number 5252 results from these particular unit choices. It is not a universal physical constant.\n\nTorque describes a turning effect, whereas horsepower describes the rate at which that turning effect performs work. A stationary shaft can sustain torque while transmitting no rotational mechanical power."
    },
    {
      "heading": "Engine and motor ratings",
      "text": "The unit of power must be distinguished from the method and location of measurement. Terms such as brake horsepower and wheel horsepower normally describe how power is assessed, not different sizes of horsepower.\n\nIndicated and brake horsepower\n\nIndicated horsepower is calculated from the pressure-volume behavior inside an engine’s cylinders. It represents power developed by the working fluid before mechanical losses between the cylinders and the output shaft.\n\nBrake horsepower, abbreviated bhp, is power measured at an engine’s output shaft using a dynamometer. The term derives from devices that applied a controlled braking load while measuring torque and rotational speed.\n\nBrake power is lower than indicated power because of mechanical losses and internal power requirements. The precise comparison depends on the engine and on which losses and accessories the measurement convention includes.\n\nGross and net ratings\n\nGross and net engine ratings use different test configurations. Historically, gross ratings often measured engines with fewer accessories and less restrictive intake or exhaust arrangements than those present in service. Net ratings generally use a configuration closer to the installed engine, including specified accessories and intake and exhaust equipment.\n\nA change from a gross to a net rating can therefore reduce the published horsepower without an equivalent change in the engine itself. Comparisons require attention to the applicable test standard, equipment configuration, and atmospheric corrections.\n\nShaft and wheel horsepower\n\nShaft horsepower identifies power transmitted by a specified shaft, particularly in marine machinery, turbines, and aircraft engines.\n\nWheel horsepower is measured through a vehicle’s driven wheels, usually on a chassis dynamometer. It is generally lower than engine output because energy is lost through the transmission, final drive, bearings, and tire interaction with the test equipment. There is no universal percentage for converting wheel horsepower into engine horsepower."
    },
    {
      "heading": "Applications and interpretation",
      "text": "Horsepower remains widely used for road vehicles, aircraft piston engines, marine engines, agricultural machinery, pumps, and industrial motors. A rating may specify continuous output, short-duration peak output, or output at a particular rotational speed. These are not interchangeable operating conditions.\n\nFor pumps and fluid systems, useful hydraulic power can be calculated from the pressure difference and volumetric flow rate:\n\n\\[P_{\\mathrm{hydraulic}}=\\Delta p\\,Q.\\]\n\nWith pressure in pascals and flow in cubic metres per second, the result is in watts and can then be converted to horsepower. Required shaft input is higher because pump efficiency is less than 100%.\n\nPeak horsepower alone does not determine vehicle performance. Acceleration also depends on mass, gearing, available traction, and the power available across the operating-speed range. Maximum speed depends on aerodynamic drag, rolling resistance, gearing, and available power.\n\nHorsepower is also distinct from energy consumption. Operating at one mechanical horsepower for one hour transfers approximately 0.7457 kilowatt-hours of energy; the corresponding fuel or electrical input depends on efficiency."
    },
    {
      "heading": "Fiscal horsepower and ambiguous labels",
      "text": "Fiscal horsepower, or tax horsepower, is an administrative classification historically used in several countries to determine vehicle taxation. Depending on the jurisdiction and period, it may be calculated from engine dimensions, displacement, emissions, or other parameters. It is not necessarily a measurement of physical power.\n\nFor an unambiguous technical specification, a horsepower figure needs its unit convention, measurement location, test standard, and operating conditions. Expressing the equivalent value in kilowatts removes the mechanical-versus-metric horsepower ambiguity, but does not resolve differences in test methods or distinguish peak from continuous output."
    }
  ],
  "links": [
    "power-physics",
    "work-physics",
    "energy",
    "international-system-of-units",
    "james-watt",
    "steam-engine",
    "friction",
    "joule",
    "second",
    "force",
    "torque",
    "pressure"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}