{
  "id": "hertz",
  "title": "Hertz",
  "lang": "en",
  "source_lang": "en",
  "summary": "The hertz (Hz) is the SI unit of frequency, equal to one complete cycle per second.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "cycles per second"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/hertz/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/hertz/",
      "json": "https://aiwiki.page/zh/hertz.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The hertz, symbol Hz, is the unit of frequency in the International System of Units (SI). One hertz represents one complete cycle of a periodic phenomenon per second. It is used to describe oscillations, vibrations, alternating electrical signals, electromagnetic waves, and other processes that repeat in time. The unit is named after the German physicist Heinrich Hertz, whose experiments demonstrated the existence of electromagnetic waves."
    },
    {
      "heading": "Definition and physical meaning",
      "text": "The hertz is a coherent SI derived unit:\n\n\\[1\\ \\mathrm{Hz}=1\\ \\mathrm{s}^{-1}.\\]\n\nFor a periodic process with period \\(T\\), the frequency \\(f\\) is\n\n\\[f=\\frac{1}{T}.\\]\n\nThe period is the time required for one complete repetition. A vibration with a period of \\(0.02\\ \\mathrm{s}\\), for example, has a frequency of \\(50\\ \\mathrm{Hz}\\).\n\nA sinusoidal quantity can be expressed as\n\n\\[x(t)=A\\cos(2\\pi ft+\\phi),\\]\n\nwhere \\(A\\) is its amplitude, \\(t\\) is time, and \\(\\phi\\) is its initial phase. The frequency specifies how rapidly the cycle repeats, not the amplitude or strength of the oscillation.\n\nAlthough hertz is equivalent to reciprocal seconds, its use conveys a particular physical meaning: repetition in cycles. Other quantities can have the same dimensions without being frequencies of periodic phenomena. For example, radioactive activity is expressed in becquerels, also equivalent to \\(\\mathrm{s}^{-1}\\), rather than hertz. Nuclear decays are counted events and need not occur periodically."
    },
    {
      "heading": "Relationship to angular frequency",
      "text": "Ordinary frequency and angular frequency describe the same periodic motion using different conventions. Ordinary frequency \\(f\\) counts complete cycles per second; angular frequency \\(\\omega\\) measures the rate of change of phase in radians per second:\n\n\\[\\omega=2\\pi f.\\]\n\nThus an oscillation at \\(1\\ \\mathrm{Hz}\\) has an angular frequency of \\(2\\pi\\ \\mathrm{rad\\,s^{-1}}\\).\n\nThe distinction matters because the radian is dimensionless in SI dimensional analysis. Both quantities therefore have dimensions of inverse time, but their numerical values differ by a factor of \\(2\\pi\\). Hertz is used for ordinary frequency; radians per second are used for angular frequency."
    },
    {
      "heading": "Symbols and multiples",
      "text": "The unit name is written in lowercase, hertz, except at the beginning of a sentence. Its symbol has a capital H and a lowercase z: Hz. Like other SI unit symbols, it is not pluralized. A space separates the numerical value from the symbol: \\(50\\ \\mathrm{Hz}\\), not “50Hz.”\n\nCommon multiples include:\n\nUnit | Symbol | Equivalent\nMillihertz | mHz | \\(10^{-3}\\ \\mathrm{Hz}\\)\nKilohertz | kHz | \\(10^{3}\\ \\mathrm{Hz}\\)\nMegahertz | MHz | \\(10^{6}\\ \\mathrm{Hz}\\)\nGigahertz | GHz | \\(10^{9}\\ \\mathrm{Hz}\\)\nTerahertz | THz | \\(10^{12}\\ \\mathrm{Hz}\\)\n\nCapitalization is significant: \\(1\\ \\mathrm{mHz}\\) is one-thousandth of a hertz, whereas \\(1\\ \\mathrm{MHz}\\) is one million hertz."
    },
    {
      "heading": "Applications",
      "text": "Sound and mechanical vibration\n\nIn acoustics, frequency describes the repetition rate of sound-pressure oscillations. A pure tone at \\(440\\ \\mathrm{Hz}\\), commonly used as a tuning reference in music, completes 440 cycles each second. Perceived pitch generally rises with frequency, although pitch perception also depends on a sound’s spectral structure and listening conditions.\n\nMechanical vibrations are likewise specified in hertz. A rotating shaft making 3,000 revolutions per minute has a rotational frequency of \\(50\\ \\mathrm{Hz}\\). Its vibration signal may also contain components at multiples of that frequency, depending on the machinery and its motion.\n\nElectricity and electronics\n\nThe frequency of alternating current describes the rate at which its waveform repeats. Many public electricity systems operate at a nominal frequency of either 50 or 60 Hz. A complete sinusoidal cycle includes both a positive and a negative half-cycle; counting both as separate cycles would incorrectly double the frequency.\n\nElectronic oscillators, filters, and communication circuits are characterized by frequencies or frequency ranges. A processor clock specified in gigahertz performs billions of clock cycles per second. Clock frequency alone does not determine computing performance: processors differ in their architecture, work completed per cycle, memory access, and number of processing cores.\n\nElectromagnetic waves\n\nThe frequency of electromagnetic radiation is related to its wavelength \\(\\lambda\\) and phase velocity \\(v\\) by\n\n\\[v=f\\lambda.\\]\n\nIn vacuum, \\(v=c\\), the speed of light. Higher-frequency radiation therefore has a shorter vacuum wavelength. Radio transmissions are commonly described in kilohertz, megahertz, or gigahertz; visible light has frequencies of several hundred terahertz.\n\nThe energy of a photon is related to frequency by\n\n\\[E=hf,\\]\n\nwhere \\(h\\) is the Planck constant. This equation concerns the energy of an individual photon, not the total power of a beam, which also depends on photon flux.\n\nSampling and displays\n\nIn digital systems, a sampling rate expressed in hertz gives the number of samples acquired each second. A rate of \\(48\\ \\mathrm{kHz}\\), for example, means 48,000 samples per second for each sampled channel.\n\nThe sampling theorem relates sampling rate to the frequencies that can be reconstructed from samples. Under the standard band-limited sampling conditions, the sampling rate must exceed twice the highest signal frequency. Practical systems use filtering to limit aliasing.\n\nDisplay refresh rate is also expressed in hertz. A 120 Hz display refreshes 120 times per second, but this does not necessarily mean that the source supplies 120 distinct images each second. Refresh rate, source frame rate, and pixel response time are separate properties."
    },
    {
      "heading": "Measurement and limitations",
      "text": "Frequency can be determined by counting cycles over a known time interval or by measuring the period and taking its reciprocal. Frequency counters commonly compare a signal with a reference timebase. Their accuracy depends on the reference’s stability, the measurement interval, signal quality, and the detection method.\n\nThe SI second is defined using the unperturbed ground-state hyperfine transition frequency of the caesium-133 atom, whose numerical value is fixed at \\(9\\,192\\,631\\,770\\ \\mathrm{Hz}\\). Frequency measurement is therefore closely connected to time measurement and metrology.\n\nA single frequency is sufficient to describe the repetition rate of an ideal sinusoid, but not every signal. A periodic non-sinusoidal waveform contains a fundamental frequency and harmonics. A transient or irregular signal may require a frequency spectrum or a time-dependent description. An average event rate expressed as events per second does not, by itself, establish that the events are periodic."
    },
    {
      "heading": "Historical background",
      "text": "Heinrich Hertz’s experiments in the late 1880s generated and detected electromagnetic waves, providing experimental support for Maxwell’s equations. Naming the frequency unit after him recognized this contribution to electromagnetism.\n\nThe name hertz replaced expressions such as “cycles per second,” formerly abbreviated “cps” or “c/s.” It was included among the named units of the SI when the system was established by the General Conference on Weights and Measures in 1960."
    }
  ],
  "links": [
    "international-system-of-units",
    "second",
    "heinrich-hertz",
    "angular-frequency",
    "music",
    "alternating-current",
    "electromagnetic-radiation",
    "speed-of-light",
    "light",
    "energy",
    "photon",
    "planck-constant",
    "sampling-theorem",
    "metrology",
    "maxwells-equations",
    "electromagnetism",
    "general-conference-on-weights-and-measures"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}