{
  "id": "henrys-law",
  "title": "Henry’s Law",
  "lang": "en",
  "source_lang": "en",
  "summary": "Henry’s law relates a gas’s equilibrium concentration in a dilute liquid solution to its partial pressure above the liquid at a specified temperature.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Henry law",
    "Henry’s gas-solubility law"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/henrys-law/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/henrys-law/",
      "json": "https://aiwiki.page/zh/henrys-law.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Henry’s law states that, at a fixed temperature, the equilibrium concentration of a dissolved gas in a liquid is proportional to the gas’s partial pressure above that liquid, provided the solution is sufficiently dilute and gas-phase nonideality is negligible. The proportionality constant depends on the gas, the solvent, temperature, and the convention used to express concentration and pressure. Named after the English chemist William Henry, who published his experimental findings in 1803, the law is a fundamental relationship in gas–liquid equilibrium, environmental science, and chemical engineering."
    },
    {
      "heading": "Mathematical statement",
      "text": "A common concentration-based form is\n\n\\[c_i=H_i^{cp}p_i,\\]\n\nwhere:\n\n- \\(c_i\\) is the equilibrium molar concentration of dissolved species \\(i\\);\n- \\(p_i\\) is its partial pressure in the gas phase;\n- \\(H_i^{cp}\\) is a Henry solubility constant defined as concentration divided by pressure.\n\nWhen concentration is expressed in \\(\\mathrm{mol\\,m^{-3}}\\) and pressure in pascals, \\(H_i^{cp}\\) has units of \\(\\mathrm{mol\\,m^{-3}\\,Pa^{-1}}\\).\n\nThe relevant pressure is that of the individual gas, not necessarily the total pressure. For an ideal gas mixture,\n\n\\[p_i=y_iP,\\]\n\nwhere \\(y_i\\) is the gas-phase mole fraction and \\(P\\) is total pressure. Thus, changing the amount of another gas while holding \\(p_i\\) fixed does not, in the ideal dilute approximation, change the equilibrium dissolved concentration of species \\(i\\).\n\nHenry’s law describes equilibrium between phases. It does not imply that a liquid exposed to a gas immediately acquires the predicted concentration."
    },
    {
      "heading": "Henry constants and their conventions",
      "text": "The expression “Henry’s constant” is ambiguous unless its definition and units are specified. Several mutually related conventions are widely used.\n\nConvention | Defining equation | Typical units | Meaning of a larger value\nConcentration/pressure | \\(H^{cp}=c/p\\) | \\(\\mathrm{mol\\,m^{-3}\\,Pa^{-1}}\\) | Greater liquid solubility\nPressure/concentration | \\(H^{pc}=p/c\\) | \\(\\mathrm{Pa\\,m^3\\,mol^{-1}}\\) | Greater tendency to enter the gas phase\nPressure/mole fraction | \\(H^{px}=p/x\\) | \\(\\mathrm{Pa}\\) | Lower solubility on a mole-fraction basis\nLiquid/gas concentration ratio | \\(H^{cc}=c_{\\mathrm{liq}}/c_{\\mathrm{gas}}\\) | Dimensionless | Greater preference for the liquid phase\n\nHere \\(x\\) is the dissolved solute’s liquid-phase mole fraction. The first two constants are reciprocals:\n\n\\[H^{pc}=\\frac{1}{H^{cp}}.\\]\n\nFor an ideal gas, \\(c_{\\mathrm{gas}}=p/(RT)\\), giving\n\n\\[H^{cc}=RT\\,H^{cp},\\]\n\nwhere \\(R\\) is the gas constant and \\(T\\) is absolute temperature. Some publications instead define the dimensionless constant as the gas/liquid concentration ratio, which is the reciprocal of the value shown above.\n\nFor a dilute solution whose solvent molar concentration is \\(c_s\\), the approximation \\(c_i\\approx x_i c_s\\) gives\n\n\\[H^{px}\\approx \\frac{c_s}{H^{cp}}.\\]\n\nConsequently, numerical constants cannot be compared solely by their names or magnitudes. A usable value must identify the convention, units, temperature, and solvent composition. Particular care is needed when converting between pascals and atmospheres, or between concentrations expressed per litre and per cubic metre."
    },
    {
      "heading": "Thermodynamic basis",
      "text": "Henry’s law follows from equality of the solute’s chemical potential in the gas and liquid at equilibrium. For the gas phase,\n\n\\[\\mu_i^{g} = \\mu_i^{g,\\circ} + RT\\ln\\left(\\frac{f_i}{f^\\circ}\\right),\\]\n\nwhere \\(f_i\\) is the solute’s fugacity, an effective pressure that accounts for nonideal gas behaviour.\n\nFor a solute in a liquid, using an infinite-dilution standard state,\n\n\\[\\mu_i^{l} = \\mu_i^{l,\\infty} + RT\\ln\\left(\\gamma_i^{H}x_i\\right).\\]\n\nThe Henry-standard-state activity coefficient \\(\\gamma_i^{H}\\) approaches unity as the solute mole fraction approaches zero. Setting the two chemical potentials equal gives\n\n\\[f_i=H_i^{fx}\\gamma_i^{H}x_i.\\]\n\nAt infinite dilution, \\(\\gamma_i^{H}\\to1\\); when the gas behaves ideally, \\(f_i\\approx p_i\\). The result reduces to the familiar form\n\n\\[p_i=H_i^{px}x_i.\\]\n\nA rigorous Henry constant can therefore be defined as the limiting slope\n\n\\[H_i^{fx} = \\lim_{x_i\\to0}\\frac{f_i}{x_i},\\]\n\nat specified temperature and liquid pressure.\n\nThis formulation explains why Henry’s law is a limiting law rather than a universally exact relationship over all concentrations. It also shows that the constant incorporates interactions between the dissolved species and its solvent. Different gases can have very different solubilities under otherwise identical conditions."
    },
    {
      "heading": "Temperature, pressure, and solvent effects",
      "text": "Temperature dependence\n\nHenry constants vary with temperature. For many gases dissolving in water near ordinary environmental temperatures, dissolution is exothermic: warming decreases solubility at a fixed gas partial pressure. Accordingly, \\(H^{cp}\\) decreases while its reciprocal \\(H^{pc}\\) increases. This behaviour is common, but not universal.\n\nOver a restricted temperature interval, a van ’t Hoff-type approximation is\n\n\\[\\ln\\left[ \\frac{H^{cp}(T)}{H^{cp}(T_0)} \\right] = -\\frac{\\Delta_{\\mathrm{sol}}H}{R} \\left(\\frac{1}{T}-\\frac{1}{T_0}\\right),\\]\n\nwhere \\(\\Delta_{\\mathrm{sol}}H\\) is the molar enthalpy change for transfer from the gas to the dissolved state under the corresponding standard-state convention. The approximation treats this enthalpy as constant over the interval.\n\nFor exothermic dissolution, \\(\\Delta_{\\mathrm{sol}}H<0\\), so cooling increases \\(H^{cp}\\). Broader temperature ranges may require additional terms accounting for changes in heat capacity.\n\nPressure and nonideality\n\nAt elevated pressures, partial pressure may no longer adequately represent the gas’s chemical potential. Fugacity must then replace pressure. The liquid’s chemical potential also changes with pressure, so high-pressure calculations can require a liquid-pressure correction as well.\n\nThus, increasing pressure does not guarantee that concentration remains exactly proportional to pressure indefinitely. Gas nonideality and increasing dissolved concentration can both produce departures from the simple law.\n\nSalts and solvent composition\n\nA Henry constant belongs to a particular solvent or solvent mixture, not just to the gas. Dissolved salts often reduce the solubility of neutral gases in water, an effect called salting out. The magnitude depends on the gas, salt, and salt concentration; some systems instead exhibit salting in.\n\nOrganic cosolvents and other dissolved substances can also change gas–liquid partitioning. A value measured in pure water is therefore not automatically applicable to seawater, industrial solutions, or biological fluids."
    },
    {
      "heading": "Dissolution versus chemical reaction",
      "text": "Henry’s law directly describes the dissolved chemical species in equilibrium with its gas-phase counterpart. It does not automatically describe the sum of all species produced by subsequent chemical reactions.\n\nFor example, carbon dioxide dissolved in water participates in hydration and acid–base equilibria. Total dissolved inorganic carbon includes dissolved molecular carbon dioxide, carbonic acid, bicarbonate, and carbonate. Its relationship to atmospheric carbon dioxide therefore depends on pH and the associated equilibria, not on a single physical-solubility constant alone.\n\nSome tabulations use a combined dissolved species, commonly written \\(\\mathrm{CO_2^*}\\), that includes molecular carbon dioxide and carbonic acid. Such a constant must be interpreted according to that definition.\n\nLikewise, dissolved ammonia can form ammonium ions. Its total dissolved concentration can greatly exceed the concentration of neutral ammonia alone, particularly in acidic solutions.\n\nAn effective Henry constant may incorporate these reactions for a defined set of conditions. Unlike a constant describing physical dissolution of one species, the effective value can depend strongly on pH or other components of the solution."
    },
    {
      "heading": "Relation to Raoult’s law",
      "text": "Henry’s law and Raoult’s law describe different limiting behaviours of liquid mixtures.\n\nIn its usual ideal form, Raoult’s law states\n\n\\[p_i=x_i p_i^*,\\]\n\nwhere \\(p_i^*\\) is the vapour pressure of pure liquid \\(i\\) at the same temperature. It describes the solvent-rich limit for a component approaching its pure-liquid state.\n\nHenry’s law instead describes a component approaching infinite dilution:\n\n\\[p_i=x_i H_i^{px}.\\]\n\nThe pure-component vapour pressure \\(p_i^*\\) and the Henry constant \\(H_i^{px}\\) generally differ. In a dilute solution, the solvent may approximately obey Raoult’s law while the solute obeys Henry’s law. For an ideal liquid solution, the two coefficients coincide under compatible approximations."
    },
    {
      "heading": "Applications",
      "text": "Dissolved gases in natural waters\n\nHenry’s law provides an equilibrium reference for oxygen, nitrogen, methane, and other gases in lakes, rivers, and the ocean.\n\nAs an illustrative calculation, the concentration/pressure constant for oxygen in pure water near \\(25\\,^\\circ\\mathrm{C}\\) is approximately\n\n\\[H^{cp}\\approx 1.3\\times10^{-5}\\ \\mathrm{mol\\,m^{-3}\\,Pa^{-1}}.\\]\n\nAt an oxygen partial pressure of about \\(2.1\\times10^4\\ \\mathrm{Pa}\\),\n\n\\[c_{\\mathrm{O_2}} \\approx0.27\\ \\mathrm{mol\\,m^{-3}} = 0.27\\ \\mathrm{mmol\\,L^{-1}},\\]\n\nequivalent to roughly \\(8.7\\ \\mathrm{mg\\,L^{-1}}\\). This is an approximate equilibrium estimate; water vapour, salinity, temperature, and atmospheric pressure affect more precise calculations.\n\nActual dissolved concentrations may differ because of photosynthesis, respiration, mixing, or incomplete equilibration. In the carbon cycle, Henry’s law supplies the physical gas–water partitioning relationship, while carbonate chemistry modifies total carbon uptake.\n\nEnvironmental transport and analytical chemistry\n\nGas–liquid partitioning helps determine whether volatile substances remain dissolved in water or enter the air. Henry constants are used in models of contaminant transport in groundwater and in the interpretation of gas exchange at water surfaces.\n\nIn headspace analysis, a sample is allowed to equilibrate with a gas volume above it. The gas-phase concentration, measured by techniques such as chromatography, can be related to the dissolved concentration using the partition coefficient and the volumes of both phases.\n\nIndustrial gas–liquid operations\n\nHenry’s law supplies equilibrium relationships for gas absorption, stripping, aeration, and degassing. These relationships indicate the equilibrium endpoint or driving force for transfer. Equipment performance additionally depends on contact area, mixing, flow, and transport rates.\n\nCarbonated beverages illustrate the same distinction. Opening a container reduces the carbon dioxide partial pressure above the liquid, lowering the equilibrium dissolved concentration. Gas escapes as the liquid approaches the new equilibrium; bubble formation and growth are separate kinetic processes."
    },
    {
      "heading": "Limits of applicability",
      "text": "The simple proportional relationship is most reliable when the dissolved species is dilute, the gas phase is nearly ideal, temperature and solvent composition are specified, and chemical reactions are absent or explicitly accounted for.\n\nSeveral distinctions are essential:\n\n- Equilibrium is not transfer rate. Henry’s law does not determine how quickly a gas dissolves or escapes. Diffusion, interfacial area, and fluid motion govern the approach to equilibrium.\n- Supersaturation is possible. A liquid may temporarily contain more dissolved gas than its equilibrium value, especially when bubble nucleation is inhibited.\n- High solubility can invalidate dilution assumptions. At substantial solute concentrations, interactions among solute molecules can make the concentration–pressure relationship nonlinear.\n- Binding is not simply physical dissolution. Henry’s law can describe freely dissolved gas, but additional equilibria are required when gas binds to other molecules. For example, oxygen bound to hemoglobin is not included in a calculation of physically dissolved oxygen alone.\n- Changing solvent conditions changes the constant. Temperature, salinity, solvent mixture, and, for effective constants involving reactions, pH must accompany the reported value."
    }
  ],
  "links": [
    "temperature",
    "partial-pressure",
    "solvent",
    "chemical-equilibrium",
    "molar-concentration",
    "pressure",
    "ideal-gas",
    "gas-constant",
    "chemical-potential",
    "fugacity",
    "standard-state",
    "activity-coefficient",
    "water",
    "enthalpy",
    "chemical-reaction",
    "carbon-dioxide",
    "ph",
    "ammonia",
    "raoults-law",
    "oxygen",
    "ocean",
    "carbon-cycle",
    "groundwater",
    "chromatography",
    "diffusion",
    "hemoglobin"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}