{
  "id": "heat-flux",
  "title": "Heat Flux",
  "lang": "en",
  "source_lang": "en",
  "summary": "Heat flux is the rate of thermal energy transfer per unit area, expressed in watts per square metre and used to describe conduction, convection, and radiation.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Heat flux density",
    "thermal flux density",
    "heat flow density"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/heat-flux/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/heat-flux/",
      "json": "https://aiwiki.page/zh/heat-flux.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Heat flux is the rate at which heat is transferred across a surface per unit area. It describes both the intensity and, when represented as a vector, the direction of thermal energy transfer. Its unit in the International System of Units is the watt per square metre, \\(\\mathrm{W\\,m^{-2}}\\). Heat flux is distinct from a heat-transfer rate, measured in watts, and from temperature, which characterizes a thermal state rather than a rate of energy transfer."
    },
    {
      "heading": "Definition and notation",
      "text": "Heat flux is commonly written as \\(\\mathbf{q}\\), \\(\\mathbf{q}''\\), or, for a scalar component, \\(q''\\). Notation varies across engineering and physics.\n\nFor a surface element of area \\(dA\\) with unit normal vector \\(\\mathbf{n}\\), the local normal heat flux is\n\n\\[q_n''=\\mathbf{q}\\cdot\\mathbf{n}.\\]\n\nThe total heat-transfer rate through a surface \\(A\\) is\n\n\\[\\dot Q=\\int_A \\mathbf{q}\\cdot\\mathbf{n}\\,dA.\\]\n\nIf the normal component is uniform over the surface, this reduces to\n\n\\[q_n''=\\frac{\\dot Q}{A}.\\]\n\nThe sign depends on the chosen surface normal. For a closed surface with an outward-pointing normal, a positive value represents heat leaving the enclosed region. Some engineering and atmospheric conventions instead define inward or downward transfer as positive, so the convention must be stated.\n\nFor example, a uniform transfer of \\(100\\ \\mathrm{W}\\) through an area of \\(0.020\\ \\mathrm{m^2}\\) corresponds to a heat flux of \\(5{,}000\\ \\mathrm{W\\,m^{-2}}\\). The same total transfer through a larger area produces a smaller average flux.\n\nThe word flux is not used identically in every discipline: it can denote either an area-normalized quantity or a surface-integrated quantity. “Heat flux density” makes the area normalization explicit, although “heat flux” ordinarily has that meaning in heat-transfer engineering."
    },
    {
      "heading": "Physical mechanisms",
      "text": "Heat can be transferred by conduction, convection, and radiation. These mechanisms often operate simultaneously, but their constitutive equations and interpretations differ.\n\nConduction\n\nThermal conduction transfers energy through microscopic interactions without requiring bulk movement of matter. In a stationary, isotropic material, Fourier’s law gives\n\n\\[\\mathbf{q}=-k\\nabla T,\\]\n\nwhere \\(k\\) is the thermal conductivity and \\(\\nabla T\\) is the temperature gradient. The negative sign indicates transfer toward decreasing temperature.\n\nIn one dimension,\n\n\\[q_x''=-k\\frac{dT}{dx}.\\]\n\nFor steady conduction through a plane wall of thickness \\(L\\), with constant conductivity, no internal heat generation, and surface temperatures \\(T_1>T_2\\), the magnitude is\n\n\\[q''=k\\frac{T_1-T_2}{L}.\\]\n\nA temperature difference alone does not determine heat flux: material properties, geometry, and boundary conditions are also necessary. A material can contain substantial thermal energy while carrying no heat flux if its temperature is spatially uniform and it exchanges no heat with its surroundings.\n\nIn an anisotropic material, conductivity is a tensor:\n\n\\[q_i=-\\sum_j k_{ij}\\frac{\\partial T}{\\partial x_j}.\\]\n\nConsequently, the heat-flux vector need not point exactly opposite the temperature gradient. Direction-dependent transport occurs in many crystals and layered composites.\n\nConvection\n\nConvection involves heat transfer associated with fluid motion together with molecular transport. For heat exchange between a surface and a fluid, a common engineering relation is\n\n\\[q''=h(T_s-T_\\infty),\\]\n\nwhere \\(T_s\\) is the surface temperature, \\(T_\\infty\\) is a reference fluid temperature, and \\(h\\) is the heat-transfer coefficient.\n\nThe coefficient \\(h\\) is not simply a material property. It depends on geometry, fluid properties, flow speed, and the development of the boundary layer. It can also depend strongly on whether the flow exhibits turbulence and whether boiling or condensation occurs.\n\nAt an impermeable solid–fluid interface, energy crosses the immediate fluid layer by molecular transport; bulk fluid motion influences the temperature field and therefore the surface heat flux. Thus, the convection formula is a boundary-level description rather than a replacement for the local conduction law.\n\nIn fluid energy balances, bulk transport of enthalpy is often written separately from conductive heat flux. Keeping these terms separate prevents confusion between heat transfer and energy carried by moving matter.\n\nRadiation\n\nThermal radiation transfers energy by electromagnetic radiation and does not require a material medium. For a small, diffuse-gray surface exchanging radiation with a large isothermal enclosure, the net outward radiative heat flux can be approximated by\n\n\\[q_{\\mathrm{rad}}''=\\varepsilon\\sigma \\left(T_s^4-T_{\\mathrm{sur}}^4\\right),\\]\n\nwhere \\(\\varepsilon\\) is surface emissivity, \\(\\sigma\\) is the Stefan–Boltzmann constant, and both temperatures are absolute temperatures in kelvins.\n\nThis expression assumes that the enclosure effectively fills the surface’s view and that the intervening medium does not significantly absorb, emit, or scatter radiation. More general situations require radiative transfer calculations that account for geometry, wavelength, direction, and participating media.\n\nEmitted radiant flux and net radiative heat flux are different quantities. A surface can emit strongly while receiving an equal amount of radiation, producing zero net radiative exchange. Blackbody radiation provides the ideal reference for these relations."
    },
    {
      "heading": "Heat flux and energy conservation",
      "text": "Heat flux enters local energy balances through its divergence. For a stationary solid with no mechanical energy exchange, a common form is\n\n\\[\\rho c_p\\frac{\\partial T}{\\partial t} =-\\nabla\\cdot\\mathbf{q}+\\dot q_v,\\]\n\nwhere \\(\\rho\\) is density, \\(c_p\\) is specific heat capacity, and \\(\\dot q_v\\) is the volumetric heat-generation rate in \\(\\mathrm{W\\,m^{-3}}\\). This form assumes an appropriate heat-capacity approximation and no unresolved phase change.\n\nCombining the balance with Fourier’s law gives\n\n\\[\\rho c_p\\frac{\\partial T}{\\partial t} =\\nabla\\cdot(k\\nabla T)+\\dot q_v.\\]\n\nFor constant properties, this becomes the heat equation:\n\n\\[\\frac{\\partial T}{\\partial t} =\\alpha\\nabla^2T+\\frac{\\dot q_v}{\\rho c_p}, \\qquad \\alpha=\\frac{k}{\\rho c_p},\\]\n\nwhere \\(\\alpha\\) is thermal diffusivity.\n\nThese equations express the first law of thermodynamics locally: a region warms when energy enters or is generated faster than it leaves. A nonzero heat flux does not necessarily imply a changing temperature. In steady conduction, equal incoming and outgoing rates can maintain a constant temperature at every point.\n\nThe volumetric generation rate \\(\\dot q_v\\), heat flux \\(q''\\), and total heat-transfer rate \\(\\dot Q\\) are therefore related but dimensionally distinct quantities."
    },
    {
      "heading": "Boundary conditions and interfaces",
      "text": "Heat-transfer models commonly prescribe one of three boundary conditions:\n\n- Specified temperature: the surface temperature is known.\n- Specified heat flux: the normal heat flux is known; an ideal insulated boundary has \\(q_n''=0\\).\n- Mixed boundary condition: flux depends on surface temperature, as in convection or radiation.\n\nAt an interface with negligible energy storage and no interfacial heat source, the normal heat flux is continuous when expressed using a consistent direction. The temperature need not be continuous if the interface has appreciable thermal contact resistance:\n\n\\[q''=\\frac{T_1-T_2}{R_c''},\\]\n\nwhere \\(R_c''\\) is the area-specific contact resistance in \\(\\mathrm{m^2\\,K\\,W^{-1}}\\).\n\nDuring a phase transition, a difference between the heat fluxes on either side of a moving interface can supply or remove latent heat. This balance determines the interface motion in models of melting and freezing."
    },
    {
      "heading": "Measurement",
      "text": "Heat flux is measured directly with calibrated sensors or inferred from other measured quantities.\n\nHeat-flux sensors commonly use a thermopile across a layer of known thermal resistance. The temperature difference across that layer produces a voltage related to the heat flux. Their interpretation depends on calibration, operating temperature, mounting, and the thermal properties of surrounding materials.\n\nTemperature-gradient methods estimate conductive flux from measured temperatures and known conductivity using Fourier’s law. Results depend on sensor spacing, temperature resolution, and whether the assumed one-dimensional temperature field is valid.\n\nCalorimetric methods infer total heat-transfer rates from energy balances. For example, a steady coolant stream with negligible changes in kinetic and potential energy gives\n\n\\[\\dot Q=\\dot m(h_{\\mathrm{out}}-h_{\\mathrm{in}}).\\]\n\nDividing this rate by a specified transfer area gives an average heat flux, not necessarily its local distribution. Such approaches are closely related to calorimetry.\n\nRadiometers measure incident or outgoing radiant flux over defined spectral and angular ranges. Infrared imaging generally measures radiance rather than net heat flux; extracting a heat flux requires additional information about emissivity, surroundings, and heat transfer.\n\nImportant sources of measurement uncertainty include contact resistance, lateral heat spreading, sensor-induced disturbance, finite response time, and unaccounted heat losses."
    },
    {
      "heading": "Applications",
      "text": "In buildings, heat flux characterizes heat loss through walls, roofs, and windows and helps assess insulation performance. In electronic devices, local heat flux can be more important than total power because concentrated dissipation creates hot spots.\n\nBoilers, condensers, and nuclear fuel cooling systems require analysis of boiling heat transfer. The critical heat flux marks a boiling-regime limit beyond which surface cooling can deteriorate sharply; its value depends on the fluid, pressure, geometry, flow, and heating conditions.\n\nIn geophysics, measurements of near-surface conductive heat flux help characterize heat escaping from Earth’s interior. Groundwater movement and transient surface-temperature changes can complicate interpretation.\n\nIn meteorology and oceanography, radiative, sensible, and latent heat fluxes describe exchanges between the surface and the atmosphere. Turbulent sensible heat flux is often estimated from the covariance of vertical velocity and temperature fluctuations. These exchanges are components of Earth’s energy budget."
    },
    {
      "heading": "Limits of classical descriptions",
      "text": "Fourier’s law is a continuum approximation suited to many macroscopic conditions. It becomes inadequate when relevant lengths approach the mean free paths of energy carriers, when changes occur on very short timescales, or when local thermal equilibrium is not established.\n\nIn solids, energy may be carried by phonons and electrons. At sufficiently small scales, partially ballistic transport and interface scattering can make heat flux depend nonlocally on the temperature field. Kinetic transport equations or atomistic methods may then be needed.\n\nClassical diffusion models also predict an instantaneous, arbitrarily small response at any distance after a disturbance. Modified constitutive laws can incorporate finite relaxation times, but their applicability depends on the material and experimental regime. At such scales, assigning a unique local temperature—and therefore interpreting a temperature-gradient-based heat flux—can itself require care."
    }
  ],
  "links": [
    "heat",
    "international-system-of-units",
    "temperature",
    "thermal-conduction",
    "thermal-conductivity",
    "convection",
    "boundary-layer",
    "turbulence",
    "enthalpy",
    "electromagnetic-radiation",
    "kelvin",
    "radiative-transfer",
    "blackbody-radiation",
    "density",
    "heat-capacity",
    "heat-equation",
    "first-law-of-thermodynamics",
    "phase-transition",
    "latent-heat",
    "calibration",
    "calorimetry",
    "measurement-uncertainty",
    "earth-energy-budget",
    "phonon"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}