{
  "id": "gray",
  "title": "Gray",
  "lang": "en",
  "source_lang": "en",
  "summary": "The gray (Gy) is the SI unit of absorbed radiation dose, equal to one joule of energy imparted per kilogram of matter.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Gray unit",
    "SI unit of absorbed dose"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/gray/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/gray/",
      "json": "https://aiwiki.page/zh/gray.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The gray, symbol Gy, is the International System of Units (SI) unit of absorbed dose, a quantity describing the energy imparted to matter by ionizing radiation per unit mass. One gray equals one joule per kilogram: \\(1\\ \\mathrm{Gy}=1\\ \\mathrm{J\\,kg^{-1}}\\). It is used in radiation measurement, medical irradiation, radiation protection, and industrial processing. The gray measures a physical energy deposition, not radioactive activity or biological harm directly."
    },
    {
      "heading": "Definition and physical meaning",
      "text": "Absorbed dose, conventionally denoted \\(D\\), is defined as\n\n\\[D=\\frac{\\mathrm{d}\\overline{\\varepsilon}}{\\mathrm{d}m},\\]\n\nwhere \\(\\mathrm{d}\\overline{\\varepsilon}\\) is the mean energy imparted by ionizing radiation to matter of mass \\(\\mathrm{d}m\\). Its SI expression is\n\n\\[1\\ \\mathrm{Gy} =1\\ \\mathrm{J\\,kg^{-1}} =1\\ \\mathrm{m^2\\,s^{-2}}.\\]\n\nThe use of mean imparted energy reflects the statistical nature of radiation interactions. Individual particles deposit energy through discrete events, whereas absorbed dose describes a macroscopic average.\n\nFor a specified region of mass \\(m\\), its mass-averaged absorbed dose is the mean energy imparted to that region divided by its mass. Thus, an average dose of \\(2\\ \\mathrm{Gy}\\) to \\(0.5\\ \\mathrm{kg}\\) of material corresponds to \\(1\\ \\mathrm{J}\\) of imparted energy. This does not imply that every part of the region receives the same dose: dose can vary considerably with position.\n\nAbsorbed dose must be associated with a specified material. A radiation field can produce different doses in water, air, bone, or a semiconductor because the materials interact differently with radiation. Quantities such as absorbed dose to water therefore identify the medium explicitly."
    },
    {
      "heading": "How radiation deposits energy",
      "text": "Ionizing radiation can transfer energy through ionization, excitation, and secondary-particle production. Charged particles, including electrons and protons, deposit energy through interactions along their paths. Uncharged radiation, such as photons and neutrons, produces charged secondary particles that subsequently deposit energy.\n\nThe gray describes the amount of deposited energy per unit mass, but not its microscopic spatial pattern. Two radiation fields can deliver the same absorbed dose while producing different concentrations of ionization along particle tracks. These differences matter when interpreting biological effects or changes in materials.\n\nAlthough its dimensions are those of energy per unit mass, absorbed dose is not simply a measure of temperature rise. Some imparted energy can initially drive excitation, chemical reactions, or structural changes. Even when the energy ultimately becomes heat, the resulting temperature increase can be small despite substantial radiation-induced effects."
    },
    {
      "heading": "Related quantities and units",
      "text": "Several radiation quantities answer different questions and should not be interchanged.\n\nQuantity | Unit | What it describes\nAbsorbed dose | Gray (Gy) | Energy imparted per unit mass\nAbsorbed-dose rate | Gy/s, often expressed using other time intervals | Absorbed dose delivered per unit time\nRadioactive activity | [[becquerel | Becquerel]] (Bq)\nEquivalent dose and effective dose | [[sievert | Sievert]] (Sv)\n\nGray and becquerel\n\nRadioactive activity describes the rate of nuclear transformations in a source. Absorbed dose describes energy deposited in a receiving material. A source’s activity alone does not determine dose: the radiation type and energy, distance, geometry, shielding, exposure duration, and properties of the receiving material also matter.\n\nGray and sievert\n\nBoth the gray and the sievert have the SI dimensions \\(\\mathrm{J\\,kg^{-1}}\\), but they represent different quantities.\n\nEquivalent dose is calculated from organ or tissue absorbed doses using radiation weighting factors. Effective dose additionally uses tissue weighting factors to combine weighted doses across organs and tissues. These quantities support radiation protection; they are not interchangeable with the physical absorbed dose used to describe a particular irradiation.\n\nFor radiation assigned a radiation weighting factor of one, a tissue’s absorbed dose in grays and its equivalent dose in sieverts can have equal numerical values. That numerical equality does not make the units or concepts synonymous.\n\nOther quantities expressed in grays\n\nThe gray is also used for kerma, the mean initial kinetic energy transferred from indirectly ionizing radiation to charged particles per unit mass. Kerma and absorbed dose are distinct: energy transferred to a charged particle need not be deposited at the point where that particle was created. Their relationship depends on charged-particle transport and radiative energy losses."
    },
    {
      "heading": "Measurement and calibration",
      "text": "The measurement and calculation of radiation dose form the field of dosimetry. Instruments generally infer absorbed dose from a measurable response rather than reading deposited energy directly.\n\nCommon methods include:\n\n- Ionization chambers, which measure electrical charge produced in a gas.\n- Calorimeters, which determine energy deposition through a small temperature change.\n- Chemical dosimeters, which use radiation-induced chemical changes.\n- Solid-state detectors and luminescent dosimeters, which use electrical signals or light emitted from irradiated materials.\n- Radiochromic films, whose optical response changes with irradiation.\n\nA detector’s response depends on its material, radiation energy, geometry, and operating conditions. Calibration relates that response to a defined dose quantity under stated conditions. Reliable measurements require metrological traceability and an assessment of measurement uncertainty.\n\nA measurement also needs to specify where the dose applies and how it is averaged. A point-dose estimate, an average over an organ, and a three-dimensional dose distribution are different descriptions, even when all use grays."
    },
    {
      "heading": "Applications and interpretation",
      "text": "In radiotherapy, absorbed dose in grays is a principal quantity for prescribing, calculating, and verifying irradiation. Dose distributions distinguish the intended treatment region from surrounding tissues. Total dose alone does not fully characterize a treatment: dose per fraction, timing, radiation type, and spatial distribution also matter.\n\nIn diagnostic imaging, several dose-related quantities are used rather than a single universal measure. Some have units of grays; others combine dose with length or area. A quantity expressed in \\(\\mathrm{Gy\\,cm}\\) or \\(\\mathrm{Gy\\,cm^2}\\) is therefore not itself an absorbed dose.\n\nIndustrial uses include sterilization, food irradiation, polymer modification, and testing the radiation tolerance of electronic components. These applications may use doses in kilograys. Radiation damage in electronics can also depend on effects that total absorbed dose alone does not describe, including atomic displacement and individual particle interactions.\n\nA dose value does not by itself specify biological outcome. Relevant factors include radiation type, dose rate, irradiated tissue, exposure distribution, and the time pattern of delivery."
    },
    {
      "heading": "Name, history, and notation",
      "text": "The gray is named after the British physicist Louis Harold Gray, whose work contributed to radiation dosimetry and radiobiology. The General Conference on Weights and Measures adopted the special name gray in 1975.\n\nAn older absorbed-dose unit is the rad:\n\n\\[1\\ \\mathrm{rad}=0.01\\ \\mathrm{Gy}, \\qquad 1\\ \\mathrm{Gy}=100\\ \\mathrm{rad}.\\]\n\nThe unit name is written in lowercase, gray, except at the beginning of a sentence. Its symbol is always Gy, without a plural ending. Common multiples and submultiples include the milligray (\\(\\mathrm{mGy}\\)), microgray (\\(\\mathrm{\\mu Gy}\\)), and kilogray (\\(\\mathrm{kGy}\\))."
    }
  ],
  "links": [
    "international-system-of-units",
    "absorbed-dose",
    "ionizing-radiation",
    "joule",
    "kilogram",
    "energy",
    "water",
    "ionization",
    "electron",
    "proton",
    "photon",
    "neutron",
    "heat",
    "becquerel",
    "radioactivity",
    "calibration",
    "metrological-traceability",
    "measurement-uncertainty",
    "radiation-therapy",
    "general-conference-on-weights-and-measures"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}