{
  "id": "gravimetric-analysis",
  "title": "Gravimetric Analysis",
  "lang": "en",
  "source_lang": "en",
  "summary": "Gravimetric analysis determines the quantity of a substance by measuring its mass or that of a chemically related product of known composition.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Gravimetry",
    "Quantitative gravimetric analysis"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/gravimetric-analysis/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/gravimetric-analysis/",
      "json": "https://aiwiki.page/zh/gravimetric-analysis.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Gravimetric analysis is a group of methods in analytical chemistry that determine the quantity of a substance from a measurement of mass. The substance being measured—the analyte—may be isolated and weighed directly, converted into a compound of known composition, or determined from a controlled change in mass. Reliable results depend on quantitative recovery, a well-defined relationship between the measured material and the analyte, and control of contamination and other sources of error."
    },
    {
      "heading": "Principles and calculations",
      "text": "Gravimetric analysis connects a physical measurement to chemical composition through stoichiometry. In a typical determination, an analyte is converted into a stable, sufficiently pure product whose mass can be measured accurately. The product need not be the same substance as the original analyte.\n\nIf each formula unit of a weighed product \\(P\\) contains \\(\\nu_A\\) units of analyte \\(A\\), the analyte mass is\n\n\\[m_A=m_P\\frac{\\nu_A M_A}{M_P},\\]\n\nwhere \\(m_P\\) is the product mass and \\(M_A\\) and \\(M_P\\) are the appropriate molar masses. The ratio\n\n\\[f_g=\\frac{\\nu_A M_A}{M_P}\\]\n\nis called the gravimetric factor. It converts the mass of the weighed form into the mass of the reported analyte.\n\nFor a sample of mass \\(m_s\\), the analyte mass fraction is\n\n\\[w_A=\\frac{m_Pf_g}{m_s}.\\]\n\nBlank corrections and factors for dilution or subsampling must be included when applicable. A blank is carried through the procedure without the sample to estimate contributions from reagents, vessels, filters, and handling.\n\nA precise weighing alone does not establish an accurate analysis. The measured material must have the assumed composition, and the separation or conversion must account quantitatively for the analyte."
    },
    {
      "heading": "Main types",
      "text": "Precipitation gravimetry\n\nIn precipitation gravimetry, a dissolved analyte is converted into a sparingly soluble solid. The precipitate is separated from the liquid, washed, dried or heated to a defined composition, and weighed.\n\nA classical example is chloride determination as silver chloride:\n\n\\[\\mathrm{Ag^+ + Cl^- \\rightarrow AgCl(s)}.\\]\n\nThe chloride mass follows from\n\n\\[m_{\\mathrm{Cl}}= m_{\\mathrm{AgCl}} \\frac{M_{\\mathrm{Cl}}}{M_{\\mathrm{AgCl}}}.\\]\n\nThus, \\(0.5000\\ \\mathrm{g}\\) of pure silver chloride corresponds to approximately \\(0.1237\\ \\mathrm{g}\\) of chloride. If obtained quantitatively from a \\(1.0000\\ \\mathrm{g}\\) sample, this represents about \\(12.37\\%\\) chloride by mass.\n\nOther established examples include sulfate determination as barium sulfate and nickel determination as a dimethylglyoxime complex. Some precipitates are converted into a different substance before weighing: calcium oxalate, for example, can be thermally converted into a defined weighing form under controlled conditions.\n\nVolatilization gravimetry\n\nVolatilization methods determine an analyte by removing it as a gas or vapor. Two arrangements are common:\n\n- Direct collection: the volatile product is trapped in a weighed absorber, and the absorber’s mass increase is measured.\n- Mass-loss determination: the sample is weighed before and after treatment, and the decrease is assigned to the material removed.\n\nExamples include collecting carbon dioxide released by acid treatment of a carbonate and determining moisture by drying.\n\nA mass loss is chemically specific only if other contributions are excluded or quantified. Heating may remove residual solvent, release several gases, or cause decomposition. A loss-on-drying result is therefore not necessarily a selective measurement of water.\n\nElectrogravimetry\n\nIn electrogravimetry, an analyte is deposited on a preweighed electrode by electrolysis. The electrode is then washed, dried, and reweighed. Its mass increase gives the deposited material.\n\nFor example, dissolved copper ions may be reduced to metallic copper at a cathode:\n\n\\[\\mathrm{Cu^{2+}+2e^- \\rightarrow Cu(s)}.\\]\n\nSuccessful determination requires complete deposition, an adherent deposit, and sufficient selectivity against other electroactive substances. Unlike coulometric analysis, electrogravimetry uses the mass of the deposit rather than the total electric charge as its principal analytical measurement.\n\nResidue and particulate methods\n\nSome methods measure a separated fraction without converting it into a single pure compound. Examples include suspended solids collected on a filter, extractable material remaining after solvent evaporation, and ash remaining after controlled combustion.\n\nSuch results are often operationally defined: their meaning depends on specified extraction, filtration, drying, or heating conditions. “Suspended solids,” for example, is not one chemical substance, and its measured quantity depends partly on the filter and procedure."
    },
    {
      "heading": "Precipitate formation and purity",
      "text": "Precipitation gravimetry depends on controlling both the amount and the physical form of the solid produced.\n\nSolubility and completeness of precipitation\n\nThe remaining dissolved analyte is governed by chemical equilibrium. For a simple sparingly soluble salt, the solubility product describes the equilibrium in terms of ionic activities. Practical recovery also depends on pH, temperature, solution composition, complex formation, and reagent concentration.\n\nA modest excess of precipitating reagent may improve recovery through the common-ion effect. Excess reagent is not always beneficial: it can increase contamination or form soluble complexes that redissolve the analyte.\n\nParticle size and digestion\n\nA precipitate must be readily separable from its mother liquor. Very fine particles can pass through filters and have large surface areas that retain impurities.\n\nPrecipitation from hot, dilute solutions with gradual reagent addition often favors larger particles by limiting local supersaturation. These conditions are not suitable for every analyte, but they illustrate the importance of controlling nucleation and crystal growth.\n\nDigestion, or aging the precipitate in contact with its mother liquor, can improve filterability and purity. Dissolution and redeposition can enlarge particles and reduce their total surface area.\n\nCoprecipitation and related contamination\n\nCoprecipitation occurs when normally soluble substances accompany the desired precipitate. Mechanisms include:\n\n- Adsorption of ions on particle surfaces.\n- Occlusion, in which pockets of mother liquor become trapped during growth.\n- Inclusion, in which foreign ions enter the crystal lattice.\n\nA separate process, postprecipitation, occurs when another solid forms after the desired precipitate and deposits on it.\n\nWashing removes much of the adhering solution and some surface contamination, but cannot necessarily remove impurities trapped inside particles. In demanding procedures, the precipitate may be dissolved and precipitated again."
    },
    {
      "heading": "Separation, drying, and weighing",
      "text": "Precipitates are commonly collected on filter paper, in sintered-glass crucibles, or in other suitable filtering vessels. The choice depends on particle size, chemical compatibility, and the intended heat treatment.\n\nThe washing liquid must remove impurities without dissolving appreciable analyte or dispersing the solid. Some colloidal precipitates undergo peptization—redispersion into fine particles—when washed with pure water. An appropriate electrolyte in the wash solution can help prevent this.\n\nThe isolated solid is brought to a defined weighing form by drying or ignition, meaning strong heating under specified conditions. Drying may remove surface moisture or solvent; ignition may decompose a precipitate into a stable oxide or another known compound.\n\nRepeated heating, cooling, and weighing are often used to establish constant mass within a specified tolerance. Constant mass indicates stability under those conditions, but does not by itself prove purity or the correct chemical composition.\n\nHeated vessels are normally cooled in a desiccator before weighing. Warm objects produce unstable balance readings through air movement and thermal effects, while moisture-sensitive residues can gain mass during exposure to laboratory air."
    },
    {
      "heading": "Accuracy and measurement uncertainty",
      "text": "Gravimetric methods can achieve high accuracy because mass is measured directly and the calculation may rely on a well-defined chemical relationship. Nevertheless, measurement uncertainty includes much more than balance performance.\n\nImportant contributions include:\n\n- Sample heterogeneity and errors in subsampling.\n- Incomplete dissolution, precipitation, or deposition.\n- Losses during transfer, filtration, and washing.\n- Contamination by reagents, filters, dust, or other sample constituents.\n- Incorrect assumptions about hydration, decomposition, or chemical composition.\n- Moisture uptake or loss during weighing.\n- Balance calibration, air buoyancy, static electricity, and weighing drift.\n\nIncomplete recovery generally causes a low result, whereas retained impurities generally cause a high result. Agreement between replicate determinations demonstrates repeatability but does not exclude a shared systematic error.\n\nQuality control may include procedural blanks, analysis of reference materials, recovery experiments, and comparison with an independent method. Metrological traceability requires an adequate measurement chain and uncertainty evaluation, not simply a calibrated balance."
    },
    {
      "heading": "Historical role and present applications",
      "text": "Gravimetric analysis was central to the development of quantitative chemistry. Accurate measurements of reactants and products supported the determination of compound composition and relative atomic masses. During the nineteenth century and much of the twentieth century, gravimetric procedures were major tools for analyzing minerals, ores, alloys, and industrial materials.\n\nMany routine determinations have since shifted toward spectroscopy, chromatography, and other instrumental methods, which often offer faster measurements, smaller sample requirements, or better performance at trace concentrations. Gravimetry remains useful for major constituents, reference and validation procedures, solids and residue measurements, and teaching quantitative laboratory technique.\n\nIts principal limitations are the time required for separation and conditioning, relatively large sample requirements, and the difficulty of obtaining a selective, pure weighing form. At very low analyte levels, handling losses and blank contributions can become large relative to the mass being determined."
    },
    {
      "heading": "Relationship to thermogravimetric analysis",
      "text": "Thermogravimetric analysis continuously measures sample mass as a function of time or temperature under a controlled atmosphere. It can reveal moisture release, decomposition, oxidation, and other thermal processes.\n\nIt shares gravimetry’s reliance on mass measurement but usually produces a mass-change curve rather than a single isolated weighing product. Assigning individual mass changes to particular chemical processes may require complementary measurements, especially when reactions overlap.\n\nGravimetric chemical analysis is also distinct from gravitational gravimetry, which measures the strength or variation of a gravitational field rather than chemical composition."
    }
  ],
  "links": [
    "analytical-chemistry",
    "mass",
    "stoichiometry",
    "molar-mass",
    "carbon-dioxide",
    "solvent",
    "water",
    "electrode",
    "electrolysis",
    "chemical-equilibrium",
    "solubility-product",
    "ph",
    "temperature",
    "adsorption",
    "measurement-uncertainty",
    "calibration",
    "metrological-traceability",
    "chemistry",
    "spectroscopy",
    "chromatography",
    "thermogravimetric-analysis"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}