{
  "id": "gnomonic-projection",
  "title": "Gnomonic Projection",
  "lang": "en",
  "source_lang": "en",
  "summary": "The gnomonic projection maps a sphere from its center onto a plane, representing great-circle routes as straight lines while greatly enlarging areas away from the map center.",
  "category": "geography",
  "subcategory": "",
  "type": "concept",
  "aliases": [
    "Central projection",
    "Central azimuthal projection"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/gnomonic-projection/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/gnomonic-projection/",
      "json": "https://aiwiki.page/zh/gnomonic-projection.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The gnomonic projection is a map projection constructed by projecting points on a sphere outward from the sphere’s center onto a plane, usually tangent to its surface. Its defining property is that every great circle appears as a straight line wherever it is represented. This makes it useful for plotting shortest routes on a spherical Earth. However, distances, areas, and shapes become increasingly distorted away from the map center, and a single finite map cannot display an entire hemisphere."
    },
    {
      "heading": "Geometric construction",
      "text": "Consider a sphere of radius \\(R\\) and a plane tangent to the sphere at a point \\(C\\). For any surface point \\(P\\) within \\(90^\\circ\\) of \\(C\\), extend the ray from the sphere’s center through \\(P\\) until it intersects the plane. That intersection is the projected position of \\(P\\).\n\nThe angular distance between \\(C\\) and \\(P\\), measured at the sphere’s center, is denoted by \\(c\\). The corresponding distance from the center of the map is\n\n\\[\\rho=R\\tan c.\\]\n\nThis relationship controls the projection’s coverage and distortion:\n\n- At \\(c=0\\), the point lies at the map center.\n- Close to the center, \\(\\tan c\\) is approximately \\(c\\), so distortion is small.\n- As \\(c\\) approaches \\(90^\\circ\\), the projected distance grows without bound.\n- Points exactly \\(90^\\circ\\) from the center have projection rays parallel to the map plane and therefore no finite projected position.\n\nThe standard cartographic projection consequently uses only the open hemisphere facing the tangent plane. Extending projection lines through both sides of the sphere would place antipodal points at the same planar location, rather than produce a unique map of the whole globe.\n\nThe gnomonic belongs to the family of azimuthal projections. Directions measured from the map center are correct, but this does not imply that directions between arbitrary pairs of points are preserved."
    },
    {
      "heading": "Why great circles become straight lines",
      "text": "A great circle is formed where a plane passing through the center of a sphere intersects its surface. Under gnomonic projection, every point on that circle is projected within the same plane. The intersection of this great-circle plane with the map plane is a straight line, unless the planes are parallel and the circle lies at the projection’s limiting horizon.\n\nThis geometric relationship explains the projection’s principal navigational use. On a sphere, the shorter great-circle arc between two non-antipodal points is the shortest surface route. If both points are within the mapped hemisphere, drawing a straight segment between their projected positions identifies that route.\n\nThe property does not mean that distances measured along the straight segment are proportional to distances on Earth. Nor does the segment normally represent a constant compass bearing. A rhumb line, which crosses meridians at a constant angle, is generally curved on a gnomonic map."
    },
    {
      "heading": "Equations",
      "text": "For a spherical Earth, let:\n\n- \\(\\phi\\) and \\(\\lambda\\) be the latitude and longitude of the point;\n- \\(\\phi_0\\) and \\(\\lambda_0\\) be the latitude and longitude of the map center;\n- \\(R\\) be the sphere’s radius;\n- \\(x\\) and \\(y\\) be projected coordinates, positive eastward and northward at the center.\n\nWrite \\(\\Delta\\lambda=\\lambda-\\lambda_0\\). The angular distance \\(c\\) satisfies\n\n\\[\\cos c= \\sin\\phi_0\\sin\\phi+ \\cos\\phi_0\\cos\\phi\\cos\\Delta\\lambda.\\]\n\nThe forward equations are\n\n\\[x= R\\frac{\\cos\\phi\\sin\\Delta\\lambda}{\\cos c},\\]\n\n\\[y= R\\frac{ \\cos\\phi_0\\sin\\phi- \\sin\\phi_0\\cos\\phi\\cos\\Delta\\lambda }{\\cos c}.\\]\n\nThese equations apply to the standard mapped hemisphere where \\(\\cos c>0\\). False easting and false northing may be added to position the map within a particular coordinate reference system.\n\nThe inverse relationship begins with\n\n\\[\\rho=\\sqrt{x^2+y^2}, \\qquad c=\\arctan\\left(\\frac{\\rho}{R}\\right).\\]\n\nFor \\(\\rho>0\\),\n\n\\[\\phi= \\arcsin\\left( \\cos c\\sin\\phi_0+ \\frac{y\\sin c\\cos\\phi_0}{\\rho} \\right),\\]\n\n\\[\\lambda= \\lambda_0+ \\operatorname{atan2} \\left( x\\sin c,\\, \\rho\\cos\\phi_0\\cos c-y\\sin\\phi_0\\sin c \\right).\\]\n\nAt \\(\\rho=0\\), the inverse position is simply the map center."
    },
    {
      "heading": "Aspects and graticule",
      "text": "The projection can be centered anywhere on the sphere. Its three conventional aspects differ in the appearance of the graticule, the network of meridians and parallels.\n\nPolar aspect\n\nThe tangent point is at either pole. Meridians appear as straight radial lines, while parallels appear as concentric circles. The equator lies at infinity and cannot be drawn as a finite boundary.\n\nEquatorial aspect\n\nThe tangent point lies on the equator. The equator is a straight line through the map center, and meridians form parallel straight lines perpendicular to it. Other parallels are curved.\n\nOblique aspect\n\nThe tangent point lies between the equator and a pole. Meridians remain straight because they are great circles, although their intersections may lie outside the displayed map. Parallels are generally curved.\n\nChanging the aspect changes the region of least distortion and the appearance of the graticule, but not the projection’s great-circle property."
    },
    {
      "heading": "Distortion",
      "text": "The gnomonic projection is neither conformal nor an equal-area projection. It preserves neither local angles nor areas except in the limiting sense at the tangent point.\n\nFor the tangent-plane construction with unit scale at the center, the principal local scale factors are\n\n\\[k_r=\\sec^2 c\\]\n\nin the radial direction, and\n\n\\[k_t=\\sec c\\]\n\nin the transverse direction, perpendicular to the radius from the map center.\n\nThe local area enlargement factor is their product:\n\n\\[k_A=k_rk_t=\\sec^3 c.\\]\n\nThus, at an angular distance of \\(60^\\circ\\), the radial scale factor is \\(4\\), the transverse scale factor is \\(2\\), and the area enlargement factor is \\(8\\). These are local factors, not uniform multipliers for an extended region.\n\nThe unequal radial and transverse scales cause angular and shape distortion. In a Tissot indicatrix, an infinitesimal circle becomes an ellipse elongated radially away from the map center. Both scale factors diverge toward the horizon.\n\nAlthough azimuths from the center are preserved, radial distances are not: they follow \\(R\\tan c\\), rather than the spherical distance \\(Rc\\). The projection is therefore not azimuthal equidistant."
    },
    {
      "heading": "Applications",
      "text": "Navigation and route planning\n\nIn cartography, the principal use is constructing great-circle routes. A navigator can draw a straight line between departure and destination on a gnomonic chart, select intermediate positions along it, and transfer those positions to a Mercator chart.\n\nThe two projections serve complementary purposes. Gnomonic maps make spherical shortest routes straight, whereas Mercator maps make constant-bearing routes straight. A great-circle route transferred to a Mercator chart normally appears curved and can be approximated by a sequence of constant-bearing legs.\n\nActual operational routes may differ from spherical shortest paths because of weather, currents, restricted areas, terrain, or other constraints.\n\nAstronomy and imaging\n\nThe same geometry is used for tangent-plane coordinates in astrometry. Positions on the celestial sphere are projected onto a plane centered on a selected viewing direction. Great circles again become straight lines, and the usable field is limited by increasing distortion away from the center.\n\nAn ideal rectilinear perspective camera also follows gnomonic geometry when image locations are related to viewing directions on a sphere. This connects the projection with perspective projection in imaging and computer graphics.\n\nGeospatial computation\n\nThe projection can simplify operations involving great-circle arcs by converting them into planar line segments. It is also used in some cube-based spherical grids, where separate gnomonic maps project regions of a sphere onto the faces of a surrounding cube. Multiple faces provide global coverage without requiring one plane to represent the whole sphere."
    },
    {
      "heading": "Historical development",
      "text": "The gnomonic projection has roots in ancient Greek geometry and is among the oldest known map projections. Its geometry is closely related to the construction of sundials: a gnomon’s shadow records the intersection of a ray associated with the Sun’s direction and a receiving surface.\n\nIts later importance in navigation arose from its straight-line representation of great-circle routes. In modern practice, the construction remains useful both as a specialized map projection and as a mathematical transformation in astronomy and geospatial software."
    },
    {
      "heading": "Spherical and ellipsoidal limitations",
      "text": "The exact straight-line property applies to great circles on a sphere. More precise representations of Earth use a reference ellipsoid, whose shortest surface paths are geodesics. Ellipsoidal geodesics are not generally planar sections through the center, so simple central projection of an ellipsoid does not make all of them straight.\n\nSpecialized ellipsoidal gnomonic formulations can make geodesics approximately straight over suitable regions, but they must be distinguished from the exact spherical construction. In a geographic information system, specifying the projection name alone is therefore insufficient: the Earth model, central coordinates, units, and implementation also matter.\n\nRapidly increasing distortion and the hemisphere boundary make the gnomonic projection unsuitable for general world maps or comparisons of area. Its value lies chiefly in representing spherical route geometry, not in giving a balanced visual portrayal of large regions."
    }
  ],
  "links": [
    "map-projection",
    "great-circle",
    "earth",
    "latitude",
    "longitude",
    "coordinate-reference-system",
    "equal-area-projection",
    "tissot-indicatrix",
    "cartography",
    "mercator-projection",
    "geodesic",
    "geographic-information-system"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}