{
  "id": "gear",
  "title": "Gear",
  "lang": "en",
  "source_lang": "en",
  "summary": "A gear is a toothed machine element that transmits motion and torque through meshing contact, enabling controlled speed ratios, force conversion, and coordinated movement.",
  "category": "technology",
  "subcategory": "engineering",
  "type": "concept",
  "aliases": [
    "Gearwheel",
    "cogwheel",
    "toothed wheel"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/gear/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/gear/",
      "json": "https://aiwiki.page/zh/gear.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A gear is a machine element with regularly spaced teeth designed to engage another toothed element and transmit motion and force. Most gears rotate, although a gear can also mesh with a straight toothed bar, or rack, to convert rotation into translation. Unlike a friction drive, a properly engaged gear pair maintains a geometrically determined average motion ratio without relying on traction between smooth surfaces. Gears can change rotational speed, multiply torque, reverse direction, redirect power between differently oriented shafts, or coordinate movements.\n\nGears range from microscopic components to wheels several metres in diameter. They are fundamental to clocks, industrial machinery, vehicle transmissions, and robotics, and appear in systems powered by sources as different as a water wheel and an electric motor. Their performance depends on tooth geometry, material properties, manufacturing accuracy, lubrication, and the stiffness of the surrounding structure. The same basic principles connect ancient astronomical mechanisms with modern high-power and high-precision transmissions."
    },
    {
      "heading": "Motion, torque, and transmission ratio",
      "text": "A gear pair is a form of positive mechanical transmission: the teeth constrain the relative movement of the members. The smaller member is commonly called the pinion, whether it drives or is driven. For two external circular gears on fixed, parallel shafts, the members rotate in opposite directions. An external pinion meshing with an internal ring gear rotates in the same direction as the ring. These relationships follow from the direction of velocity at the meshing region, not from which component supplies power.\n\nIf gear 1 drives gear 2, the magnitude of their speed ratio is\n\n\\[i=\\left|\\frac{\\omega_1}{\\omega_2}\\right|=\\frac{z_2}{z_1},\\]\n\nwhere \\(\\omega\\) is angular velocity and \\(z\\) is tooth count. A 20-tooth pinion driving a 60-tooth gear therefore produces a reduction of 3:1: the driven gear turns once for every three revolutions of the pinion. This ratio is exact as an average over complete tooth engagements, although elastic deformation and manufacturing errors can cause small instantaneous deviations from ideal motion.\n\nThe mechanical power carried by a rotating shaft is\n\n\\[P=T\\omega,\\]\n\nwhere \\(T\\) is torque. Consequently, a reduction in speed permits an increase in output torque. For a reduction gear pair with efficiency \\(\\eta\\),\n\n\\[T_2=\\eta iT_1.\\]\n\nGearing does not create energy: the torque increase is obtained at the expense of speed, and the output power is lower than the input power because of friction, fluid resistance, and other losses. Conversely, driving the larger gear to turn the smaller one increases speed while reducing available torque.\n\nFor a cylindrical gear, the transmitted tangential force at the reference diameter \\(d\\) is approximately\n\n\\[F_t=\\frac{2T}{d}.\\]\n\nThis relation explains why increasing gear diameter can reduce the tooth force required to transmit a specified torque. Diameter cannot be increased without consequences, however: a larger gear occupies more space, adds rotational inertia, and has a higher pitch-line velocity at a given rotational speed.\n\nThe shafts, housing, and supporting components are part of the transmission’s functional structure. A ball bearing or another bearing type must carry the radial and sometimes axial forces generated by meshing. Shaft deflection or housing distortion changes tooth alignment and can concentrate load near one edge. A gear pair therefore cannot be evaluated solely as two isolated toothed wheels; its performance depends on the mechanical system that holds their axes in position."
    },
    {
      "heading": "Tooth geometry and conjugate action",
      "text": "The fundamental law of gearing states that the common normal to the contacting tooth profiles must pass through a fixed point on the line joining the gear centres if the angular velocity ratio is to remain constant. This point is the pitch point. Profiles satisfying the required motion relationship are called conjugate profiles. Their purpose is not simply to prevent slipping, but to control how the contact point moves while preserving the intended relationship between shaft angles.\n\nThe most widely used profile in modern power transmission is the involute tooth profile. An involute can be generated by unwinding a taut string from a circle, called the base circle. For an external involute spur-gear pair, tooth contact progresses along a straight line of action tangent to both base circles. A major practical advantage is that a modest change in centre distance does not change the theoretical velocity ratio, although it changes the operating pressure angle, backlash, and contact conditions.\n\nSeveral dimensions specify a cylindrical gear. The reference circle establishes nominal tooth spacing; the addendum extends from it to the tooth tip, and the dedendum extends toward the tooth root. For a standard metric spur gear, module \\(m\\), reference diameter \\(d\\), and tooth count \\(z\\) satisfy\n\n\\[m=\\frac{d}{z}.\\]\n\nThe circular pitch is \\(p=\\pi m\\). Thus a module-2 gear with 30 teeth has a reference diameter of 60 mm. Gears intended to mesh must have compatible pitch and tooth geometry. In helical gearing, normal and transverse quantities must be distinguished; the normal module is measured in a plane perpendicular to the tooth direction.\n\nThe pressure angle is the angle between the line of action and the common tangent to the operating pitch circles. A reference pressure angle of \\(20^\\circ\\) is common in modern industrial involute gearing, although other values are used. Increasing pressure angle can provide a stronger tooth root but also increases separating force and alters contact ratio. For an ideal spur gear pair, the radial separating force is\n\n\\[F_r=F_t\\tan\\alpha,\\]\n\nwhere \\(\\alpha\\) is the operating pressure angle.\n\nThe contact ratio describes the extent of overlapping engagement. For spur gears it is the length of the path of contact divided by the base pitch. A value greater than one allows a new tooth pair to enter contact before the preceding pair disengages. Tooth geometry must also avoid interference and excessive undercut, which can weaken small pinions. Profile shifting changes the cutting tool’s position relative to the gear blank and can improve root strength or accommodate a required centre distance. Deliberate tip relief and flank crowning further modify the ideal shape to compensate for elastic deflection and alignment errors under load."
    },
    {
      "heading": "Principal gear forms",
      "text": "Spur gears have straight teeth parallel to the shaft axis and normally connect parallel shafts. They are relatively straightforward to manufacture, inspect, and analyse. Because engagement changes across the tooth width at approximately the same time, they can produce pronounced excitation at the tooth-meshing frequency, especially at high speed. Their simplicity makes them common in machinery, instruments, and mechanisms where cost, efficiency, or straightforward assembly is important.\n\nHelical gears have teeth inclined to the axis. Engagement progresses across the face width, producing overlapping contact and generally smoother load transfer than comparable spur gears. A parallel-shaft external pair ordinarily uses opposite helix hands. Helical teeth produce axial thrust as well as tangential and radial forces; ideally, its magnitude is \\(F_a=F_t\\tan\\beta\\), where \\(\\beta\\) is the helix angle. Double-helical arrangements use opposed helices to balance much of this thrust. Herringbone gears have adjoining opposed helices, while many double-helical gears include a central clearance groove.\n\nBevel gears transmit motion between intersecting shaft axes, commonly at \\(90^\\circ\\), using approximately conical pitch surfaces. Straight bevel gears have straight tooth traces, while spiral bevel gears have curved, oblique teeth that give more gradual engagement. Hypoid gears resemble spiral bevel gears but connect nonintersecting, nonparallel axes. Their offset permits packaging arrangements valuable in vehicle final drives, but introduces substantial sliding and demanding lubrication conditions.\n\nA worm drive combines a screw-like worm with a mating worm wheel, usually on perpendicular, nonintersecting shafts. It can provide a large reduction in one stage and operates with substantial sliding contact. Worms are commonly made of hardened steel and paired with bronze wheels to obtain suitable friction and wear behaviour. Some worm drives resist being driven backward by their load, but self-locking is conditional, depending on lead angle, friction, lubrication, vibration, and operating conditions. It is not a universal property of worm gearing or a substitute for a dedicated holding device.\n\nA rack and pinion converts rotation into linear motion. For a pinion with reference diameter \\(d\\), one revolution ideally advances the rack by \\(\\pi d\\). Applications include machine-tool axes, steering mechanisms, and rack railways. An internal gear instead places the teeth on the inside of a ring, allowing compact arrangements and a same-direction mesh with an external pinion.\n\nOther forms serve specialized motion requirements. Noncircular gears deliberately vary the instantaneous ratio during rotation, allowing periodic changes in speed. Crossed-helical gears connect skew shafts but generally have more localized contact and lower load capacity than comparable parallel-shaft gearing. Strain-wave gearing uses an elastically deformable toothed member to obtain large reductions in compact assemblies, especially in precision positioning."
    },
    {
      "heading": "Gear trains and differential motion",
      "text": "A gear train combines multiple gears to obtain a desired speed ratio, shaft arrangement, or relationship among several motions. In a simple fixed-axis train, each shaft carries one functional gear. Intermediate gears, often called idlers, alter direction or bridge a distance but do not change the magnitude of the overall ratio between the first and last gears. Their tooth counts cancel when the successive ratios are multiplied.\n\nA compound train places two or more gears rigidly on at least one common shaft. Its overall ratio is the product of the individual stage ratios:\n\n\\[i_{\\mathrm{total}}=i_1i_2\\cdots i_n.\\]\n\nTwo reduction stages of 4:1 and 5:1 produce an overall reduction of 20:1. Dividing a large reduction among stages can avoid the excessive diameter difference required in a single pair. The distribution of ratios nevertheless affects mass, tooth forces, shaft speeds, lubrication, and efficiency. A high-speed first stage and a low-speed final stage generally face different design constraints.\n\nAn epicyclic gear train, often called planetary gearing, allows one or more gear axes to move. A common arrangement contains a central sun gear, surrounding planet gears mounted on a carrier, and an internally toothed ring gear. For a simple planetary set,\n\n\\[\\frac{\\omega_s-\\omega_c}{\\omega_r-\\omega_c} =-\\frac{z_r}{z_s},\\]\n\nwhere subscripts \\(s\\), \\(r\\), and \\(c\\) refer to the sun, ring, and carrier. This equation expresses the relative motion as observed from the carrier. Fixing one member and choosing the input and output members produces different ratios and directions.\n\nWith the ring fixed, the sun as input, and the carrier as output, the reduction is\n\n\\[i=1+\\frac{z_r}{z_s}.\\]\n\nA 30-tooth sun and 90-tooth ring therefore give a 4:1 reduction; geometrically, compatible planets have 30 teeth in the standard same-module arrangement. Multiple planets can divide transmitted load and provide coaxial input and output shafts. Equal load sharing is not automatic: dimensional errors and support stiffness can cause some planets to carry more load than others.\n\nA differential is a gear arrangement that permits two outputs to rotate at different speeds while constraining their combined motion. In a symmetrical automotive differential, the carrier speed equals the average of the two output-shaft speeds. This allows the outer driven wheel to turn faster than the inner wheel during a corner. An ideal open differential supplies approximately equal torque to the two outputs, so low traction at one wheel can limit the torque delivered to both.\n\nPlanetary and differential arrangements can also combine power from multiple inputs. Their motion equations alone do not determine efficiency or component loading: internal power may circulate through different paths, and clutches, brakes, or electrical machines can change which members supply, absorb, or react torque."
    },
    {
      "heading": "Tooth loading, strength, and accuracy",
      "text": "Gear teeth behave as both short cantilevered structures and heavily loaded contact surfaces. The tangential component of the transmitted force bends a tooth near its root, while the contact force produces concentrated compressive stresses on the flank. A gear can therefore have adequate resistance to tooth-root fracture yet inadequate resistance to surface fatigue, or the reverse. Both must be considered over the intended load spectrum and operating life.\n\nA simplified expression associated with the Lewis tooth-bending approach is\n\n\\[\\sigma_b\\approx\\frac{F_t}{bmY},\\]\n\nwhere \\(b\\) is face width, \\(m\\) is module, and \\(Y\\) is a dimensionless tooth-form factor under this convention. Wilfred Lewis introduced his influential gear-tooth strength analysis in 1892. Modern calculations are substantially more detailed: they include stress concentration, dynamic loading, load distribution, size effects, material quality, reliability, and the changing participation of adjacent tooth pairs.\n\nSurface loading is commonly analysed using Hertzian contact mechanics. The contact region is finite because both teeth deform elastically. The resulting stresses extend below the surface and vary as the contact patch travels across the flank. Repeated cycles can initiate cracks and produce pitting, in which small pieces detach from the surface. Micropitting occurs on a much finer scale and is strongly influenced by roughness, lubricant film conditions, material properties, and local sliding.\n\nTooth loads also exceed their nominal static values because of acceleration, shock, and vibration. Transmission error is the deviation of actual output position from the position predicted by ideal rigid geometry. It arises from manufacturing deviations, elastic deformation, and changes in mesh stiffness as the number and position of contacting teeth vary. It is a major source of gear vibration and tonal noise. The basic mesh frequency is\n\n\\[f_m=zf_r,\\]\n\nwhere \\(z\\) is the tooth count of a selected gear and \\(f_r\\) is its rotational frequency. A 30-tooth gear rotating at 1,800 revolutions per minute has a mesh frequency of 900 Hz.\n\nDimensional accuracy does not by itself guarantee quiet operation. A geometrically precise unloaded tooth may require intentional modification to work smoothly under its design load. Likewise, greater face width does not always produce a proportional strength increase, because misalignment can prevent uniform load distribution.\n\nIndustrial rating methods, including the ISO 6336 series for spur and helical gear capacity and standards issued by the American Gear Manufacturers Association, formalize many of these effects. Their calculations depend on specified assumptions about duty, lubrication, manufacture, and alignment. Variable loading is particularly important: short periods of overload can contribute disproportionately to fatigue damage, while a single severe event may cause immediate tooth breakage."
    },
    {
      "heading": "Materials, manufacturing, and inspection",
      "text": "Gear materials are selected according to load, speed, wear resistance, dimensional stability, noise, environment, and production volume. Steel dominates many high-load applications because heat treatment can combine a hard wear-resistant surface with a comparatively tough core. Cast iron offers useful vibration damping and manufacturability for some larger or moderately loaded components. Bronze remains important in worm wheels, while engineering polymers are widely used in lightly loaded, low-noise, or electrically insulating mechanisms.\n\nCase-carburized steels are common in vehicle and industrial transmissions. Carburizing enriches the surface with carbon at elevated temperature, after which quenching and tempering produce a hard case over a lower-carbon core. Nitriding introduces nitrogen to form a hard surface layer and can offer relatively low distortion. Through-hardening treats the tooth more uniformly, while induction hardening selectively heats the surface before quenching. Each route affects fatigue resistance, residual stress, finishing requirements, and dimensional control.\n\nTooth manufacture distinguishes form cutting, in which a tool reproduces a tooth-space shape, from generating, in which coordinated relative motion creates the profile. Gear hobbing uses a rotating, screw-like cutter synchronized with the blank and is widely employed for external cylindrical gears. Gear shaping uses a reciprocating gear-shaped cutter and can produce internal gears. Power skiving combines synchronized rotation with crossed tool and workpiece axes and is particularly valuable for productive internal-gear manufacture when access and machine capability permit.\n\nHeat treatment can distort tooth spacing, profile, and lead. High-precision hardened gears therefore often undergo grinding or honing. Grinding removes material with an abrasive tool to establish accurate flank geometry; honing can improve surface texture and contact behaviour. Lapping, especially for some bevel gear sets, uses controlled abrasive action between mating components. Excessive thermal input during grinding can damage the hardened surface, so process control concerns both geometry and metallurgical integrity.\n\nOther production methods suit different scales and quantities. Injection moulding can produce complex plastic gears economically in large volumes, although shrinkage, moisture absorption, and temperature affect accuracy. Powder metallurgy and sintering permit near-net-shape gears, with performance influenced by density, pore structure, and subsequent processing. Additive manufacturing is useful for prototypes and specialized geometries, but demanding tooth surfaces commonly require additional treatment and machining.\n\nInspection measures pitch deviations, profile, helix, runout, tooth thickness, and surface texture. Analytical measuring machines assess individual geometric features, while rolling tests examine the combined behaviour of a gear and a mating master or partner. Computer-aided design connects nominal geometry with manufacturing data and contact analysis, but physical inspection remains necessary because the finished part reflects tool wear, thermal history, machine errors, and workholding conditions."
    },
    {
      "heading": "Lubrication, losses, and deterioration",
      "text": "Lubrication reduces friction, limits wear, removes heat, and helps prevent corrosion. A loaded gear mesh combines rolling and sliding: in ideal involute spur gearing, relative sliding is zero at the pitch point but occurs elsewhere along the path of contact. Sliding direction changes across the pitch point. Consequently, different regions of a tooth flank experience different frictional and thermal conditions even during steady operation.\n\nIn heavily loaded steel gearing, the lubricant may form an elastohydrodynamic film. High contact pressure raises the oil’s effective viscosity, while elastic deformation enlarges the contact region. The resulting film can separate surfaces that appear almost rigid at ordinary scales. Whether full separation occurs depends on film thickness relative to the combined surface roughness. Under mixed or boundary lubrication, some load is carried by asperity contacts, making surface chemistry and lubricant additives especially important.\n\nOil can reach the teeth by splash, immersion, directed jets, or circulating systems. Splash lubrication uses rotating components to distribute oil from a sump. Forced circulation can also carry heat to a cooler, pass oil through filters, and supply bearings. Oil viscosity must suit operating temperature and contact conditions: greater viscosity can improve film formation but also increase viscous drag and churning losses. Overfilling a housing can similarly increase heat generation rather than improve lubrication.\n\nSeveral failure modes must be distinguished. Scuffing is severe adhesive damage associated with local film breakdown, high sliding, and high surface temperature. Abrasive wear occurs when hard particles or surface asperities remove material. Corrosion can damage flanks during operation or storage. Pitting and micropitting are fatigue-related surface phenomena, while tooth-root cracks arise predominantly from repeated bending. These mechanisms can interact: debris from one damaged surface may abrade other teeth and bearings.\n\nGearbox losses include tooth sliding friction, bearing and seal friction, oil churning, and windage. A well-designed spur or helical stage can exceed 98% efficiency under suitable operating conditions, but this is not a universal value. Efficiency varies with load, speed, size, lubrication, and temperature, and a complete multistage gearbox includes losses beyond the meshes themselves. Worm drives can have substantially lower efficiency because of their sliding geometry, especially at low lead angles.\n\nCondition monitoring uses several complementary measurements. An accelerometer or other sensor can detect changes in vibration near mesh frequencies and their harmonics; shaft-related sidebands may reveal modulation associated with localized defects. Signal processing methods such as order tracking help separate changes due to speed from changes in condition. Oil analysis detects contamination, lubricant degradation, and wear particles. Temperature monitoring identifies abnormal heating, but reliable interpretation normally requires operating context and trends rather than a single measurement."
    },
    {
      "heading": "Historical development",
      "text": "Gearing developed from the broader use of the wheel, but a rotating wheel is not necessarily a gear: teeth must engage another element to impose a motion relationship. Surviving objects and written descriptions show sophisticated gearing in the ancient Mediterranean. The Antikythera mechanism, generally dated to the second or first century BCE, contains bronze gears used to represent astronomical cycles. Its surviving fragments demonstrate the ability to combine tooth counts into complex mathematical relationships, although details of its complete reconstruction remain subjects of research.\n\nIn the first century BCE, the Roman author Vitruvius described machinery including geared water mills. Such installations used gearing to redirect the rotation of a vertical water wheel to a millstone turning about a vertical axis. This illustrates an enduring function of gears: matching the direction and speed of a power source to the requirements of a working machine. Ancient examples do not establish a single inventor or a simple uninterrupted line of development.\n\nDuring the medieval period, geared machinery appeared in mills, astronomical instruments, and mechanical clocks across several technological traditions. Mill gearing often used large wooden teeth or cogs inserted into a wheel body, allowing replacement of worn elements. Lantern pinions, with cylindrical pins arranged between end plates, provided another practical construction. Medieval mechanical clocks brought increasing attention to coordinated ratios and reliable transmission of small amounts of power over long periods.\n\nClockmaking encouraged the study of tooth forms, although clock gearing and industrial power gearing developed under different priorities. Cycloidal profiles became important in horology, where friction, tooth count, and the interaction with lightly powered mechanisms differ from heavy machinery. The development of mathematical descriptions of tooth action in the eighteenth century, including work by Leonhard Euler, helped establish the basis for conjugate-profile design and the later widespread use of involute teeth.\n\nIndustrialization greatly expanded both gear demand and manufacturing capability. The steam engine, mechanized textile production, machine tools, and expanding factory systems required stronger and more consistent power transmission. Metal cutting and improved metallurgy gradually displaced many traditional wooden constructions in demanding applications. During the nineteenth century, specialized generating machinery made it increasingly practical to manufacture interchangeable gears rather than finish each pair as a unique combination.\n\nIn the twentieth century, vehicle production, turbine machinery, aviation, and industrial automation drove advances in hardened steels, precision grinding, lubrication, and fatigue analysis. Later developments in numerical control and computational modelling made complex flank modifications and detailed tooth-contact analysis routine in advanced manufacturing. Historical progress therefore involved more than tooth shape: reliable high-performance gearing depended equally on materials, bearings, machine accuracy, inspection, and the ability to control heat and lubrication."
    },
    {
      "heading": "Applications and system-level design",
      "text": "Gears are used where a machine needs a controlled relationship between speed, torque, position, or direction. In an automobile, a transmission matches the operating range of an internal-combustion engine to widely varying road speeds and tractive demands. Final-drive gearing provides further reduction, while the differential accommodates different wheel speeds. An electric vehicle often needs fewer selectable ratios because its motor can operate over a broad speed range, but reduction gears and differentials remain common.\n\nIn wind power, a geared turbine drivetrain raises the relatively slow rotor speed to a speed suitable for its generator. Large ratios and highly variable loads make planetary stages, bearing support, lubrication, and fatigue performance important. Not all wind turbines use gearboxes: direct-drive configurations connect a suitable generator to the rotor without a speed-increasing gear train. The choice redistributes requirements among generator size, structural mass, maintenance arrangements, and drivetrain complexity.\n\nPrecision machinery emphasizes positioning as well as power. Backlash, the clearance between mating tooth flanks measured in a specified direction, permits assembly and lubricant access but creates lost motion when torque reverses. In machine tools, robots, and optical positioning equipment, backlash and torsional compliance can limit accuracy. Split gears, preloaded arrangements, strain-wave drives, and cycloidal reducers address these requirements in different ways. Very low backlash does not imply infinite rigidity: elastic deformation, friction, and hysteresis still affect output position.\n\nGearing also interacts with control theory. A motor encoder measures the motor shaft accurately, but a compliant transmission can allow the load to oscillate or lag relative to that measurement. High reductions increase output torque while reflecting motor inertia to the load by the square of the ratio in an ideal rigid model. Conversely, load inertia reflected to the motor is divided by the square of the reduction ratio. These relationships influence acceleration, disturbance response, and the choice of feedback location.\n\nAlternatives include belts, chains, friction drives, hydraulic transmissions, and direct drive. Belts can provide quiet operation and tolerate useful shaft separation; toothed belts provide synchronous motion without metal-to-metal tooth contact. Chains suit robust power transfer over longer centre distances. Gears usually offer compact positive transmission and high load capacity, but demand accurate alignment and can introduce noise, lubrication requirements, and concentrated loads.\n\nSystem design therefore selects gearing according to the actual duty rather than reduction ratio alone. A compact aircraft transmission, a low-cost appliance, a mill drive, and a robotic joint impose different priorities on mass, efficiency, sound, service life, and manufacturing cost. Electrification has sharpened attention to high-speed gear dynamics and audible tonal noise, while advanced surface finishing, improved lubrication, and computer-based contact analysis continue to expand the operating range of geared transmissions."
    }
  ],
  "links": [
    "robotics",
    "water-wheel",
    "electric-motor",
    "torque",
    "energy",
    "ball-bearing",
    "involute-gear",
    "bevel-gear",
    "rack-and-pinion",
    "polymer",
    "metallurgy",
    "3d-printing",
    "elastohydrodynamic-lubrication",
    "sensor",
    "signal-processing",
    "wheel",
    "steam-engine",
    "automobile",
    "internal-combustion-engine",
    "electric-vehicle",
    "wind-power",
    "electric-generator",
    "control-theory"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}