{
  "id": "fresnel-diffraction",
  "title": "Fresnel Diffraction",
  "lang": "en",
  "source_lang": "en",
  "summary": "Fresnel diffraction describes wave propagation in which wavefront curvature affects the observed diffraction pattern, typically at intermediate distances from an aperture or obstacle.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Near-field diffraction"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/fresnel-diffraction/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/fresnel-diffraction/",
      "json": "https://aiwiki.page/zh/fresnel-diffraction.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Fresnel diffraction is a regime of diffraction in which the curvature of a propagating wavefront must be retained when calculating the field beyond an aperture or obstacle. In optics, it commonly describes patterns observed before the far-field limit is reached: fringes change with propagation distance, and the observed intensity is not simply a scaled angular distribution. Named after Augustin-Jean Fresnel, the theory uses a quadratic approximation to propagation distance. It is widely called near-field diffraction, although it does not describe every phenomenon occurring very close to a surface."
    },
    {
      "heading": "Physical basis",
      "text": "Diffraction arises because waves passing through different parts of an opening, or around an obstacle, combine with different phases. Their interference produces bright and dark regions rather than the sharply bounded shadows predicted by geometrical optics.\n\nThe Huygens–Fresnel principle represents a wavefront as a continuous distribution of secondary wave contributions. The field at an observation point is obtained by adding these contributions with their propagation phases and amplitudes. Fresnel diffraction retains the leading effect of spherical wavefront curvature in that addition.\n\nThis distinguishes it from Fraunhofer diffraction, in which the relevant quadratic phase variation across the aperture can be neglected. In the Fraunhofer regime, the diffraction pattern has an essentially fixed angular form; in the Fresnel regime, its shape generally evolves as the observation plane moves.\n\nThe distinction concerns propagation geometry rather than a different physical mechanism. Both regimes follow from the same wave theory."
    },
    {
      "heading": "Fresnel diffraction integral",
      "text": "Consider monochromatic light of wavelength \\(\\lambda\\) propagating through a homogeneous medium. Let \\(U_0(\\xi,\\eta)\\) denote its complex scalar amplitude in the plane \\(z=0\\), and let \\(U(x,y,z)\\) denote the amplitude in a parallel plane a distance \\(z>0\\) away. With the time dependence chosen as \\(e^{-i\\omega t}\\), the Fresnel propagation integral is\n\n\\[U(x,y,z)= \\frac{e^{ikz}}{i\\lambda z} \\iint_{\\mathbb{R}^2} U_0(\\xi,\\eta) \\exp\\!\\left[ \\frac{ik}{2z} \\bigl((x-\\xi)^2+(y-\\eta)^2\\bigr) \\right] \\,d\\xi\\,d\\eta,\\]\n\nwhere \\(k=2\\pi/\\lambda\\).\n\nFor an ideal thin aperture, the initial field is commonly modeled as\n\n\\[U_0(\\xi,\\eta) = t(\\xi,\\eta)\\,U_{\\mathrm{inc}}(\\xi,\\eta),\\]\n\nwhere \\(t\\) is the aperture’s complex amplitude transmission and \\(U_{\\mathrm{inc}}\\) is the incident field. The transmission can represent changes in both amplitude and phase. For an ideal opaque screen with an opening, it is zero outside the opening.\n\nThe observed intensity is proportional to \\(|U|^2\\). Consequently, propagation changes intensity through phase-sensitive addition of contributions, not merely by geometrical spreading.\n\nOrigin of the approximation\n\nThe exact distance between a point in the initial plane and an observation point is\n\n\\[r=\\sqrt{z^2+\\rho^2}, \\qquad \\rho^2=(x-\\xi)^2+(y-\\eta)^2.\\]\n\nExpanding gives\n\n\\[r=z+\\frac{\\rho^2}{2z} -\\frac{\\rho^4}{8z^3}+\\cdots.\\]\n\nThe Fresnel approximation retains the quadratic term in the phase \\(kr\\), while approximating slowly varying amplitude factors by their paraxial values. Its usual geometric requirement is \\(\\rho/z\\ll1\\). Accurate phase prediction also requires the neglected phase contribution to be small over the relevant integration region, for example\n\n\\[\\frac{k\\rho^4}{8z^3}\\ll1.\\]\n\nThus “near field” does not mean that the observation distance can be arbitrarily small. The approximation applies to paraxial propagation, with the necessary accuracy determined by wavelength, geometry, and the required phase precision."
    },
    {
      "heading": "Fresnel number and the far-field limit",
      "text": "A useful dimensionless measure is the Fresnel number, commonly defined as\n\n\\[N_F=\\frac{a^2}{\\lambda z},\\]\n\nwhere \\(a\\) is a characteristic transverse aperture size, such as the radius of a circular opening. Numerical thresholds depend on the convention used for \\(a\\), the illumination, and the desired accuracy.\n\nFor approximately plane-wave illumination:\n\n- \\(N_F\\ll1\\) generally indicates the Fraunhofer regime.\n- \\(N_F\\) of order unity or larger generally requires Fresnel diffraction or a more complete propagation treatment.\n\nThere is no sharp physical boundary between these regimes. A large Fresnel number also does not, by itself, guarantee that the Fresnel approximation remains valid.\n\nThe relationship to the far-field approximation becomes clear by rewriting the propagation integral:\n\n\\[\\begin{aligned} U(x,y,z) ={}& \\frac{e^{ikz}}{i\\lambda z} e^{ik(x^2+y^2)/(2z)} \\\\ &\\times \\iint U_0(\\xi,\\eta) e^{ik(\\xi^2+\\eta^2)/(2z)} e^{-i2\\pi(x\\xi+y\\eta)/(\\lambda z)} \\,d\\xi\\,d\\eta. \\end{aligned}\\]\n\nIf the aperture-dependent quadratic factor is approximately constant over the illuminated opening, the remaining integral is a Fourier transform of the aperture field. This is the Fraunhofer limit.\n\nA lens can introduce a compensating quadratic phase, allowing a Fourier-transform diffraction pattern to be formed in a focal plane without an extremely long propagation distance."
    },
    {
      "heading": "Characteristic patterns",
      "text": "Straight edge\n\nAn opaque straight edge produces fringes near the geometrical shadow boundary. Light extends into the nominal shadow, while alternating maxima and minima occur mainly on the illuminated side.\n\nFor a normally incident plane wave, a convenient normalized coordinate is\n\n\\[v=x\\sqrt{\\frac{2}{\\lambda z}},\\]\n\nwhere \\(x=0\\) is the geometrical boundary and \\(x>0\\) points toward the illuminated region. Define the Fresnel integrals\n\n\\[C(v)=\\int_0^v \\cos\\!\\left(\\frac{\\pi t^2}{2}\\right)\\,dt, \\qquad S(v)=\\int_0^v \\sin\\!\\left(\\frac{\\pi t^2}{2}\\right)\\,dt.\\]\n\nThe normalized intensity is then\n\n\\[\\frac{I(v)}{I_0} = \\frac12 \\left[ \\left(\\frac12+C(v)\\right)^2+ \\left(\\frac12+S(v)\\right)^2 \\right].\\]\n\nAt the geometrical shadow boundary, this idealized model gives \\(I/I_0=1/4\\). Far into the illuminated region, the intensity approaches the unobstructed value \\(I_0\\).\n\nThe parametric plot of \\(C(v)\\) against \\(S(v)\\), known as the Cornu spiral, provides a graphical method for adding diffraction contributions.\n\nSlits and rectangular apertures\n\nFor a uniformly illuminated rectangular opening, the two-dimensional integral separates into two one-dimensional integrals. The resulting field can therefore be expressed using Fresnel integrals evaluated at the aperture boundaries.\n\nUnlike the familiar far-field single-slit pattern, the Fresnel pattern can contain substantial structure within the geometrical image of the opening. Its maxima and minima shift and change contrast with distance.\n\nCircular apertures and opaque disks\n\nCircular apertures produce concentric intensity structures whose axial and transverse distributions depend on distance. Fresnel-zone analysis makes these changes particularly clear.\n\nA circular opaque disk can produce a bright on-axis point within its geometrical shadow, called the Poisson spot or Arago spot. Under suitably coherent and symmetric illumination, contributions from around the disk’s boundary reinforce on the axis. Finite source size, misalignment, and edge imperfections can reduce its visibility."
    },
    {
      "heading": "Fresnel zones",
      "text": "Fresnel zones divide a wavefront into regions whose optical path lengths to a selected observation point differ successively by half a wavelength. Contributions from neighboring zones are therefore approximately opposite in phase.\n\nFor a plane wave and an on-axis observation point at distance \\(z\\), the zone-boundary radii satisfy, in the paraxial approximation,\n\n\\[r_n\\approx\\sqrt{n\\lambda z}, \\qquad n=1,2,3,\\ldots.\\]\n\nIf the source is also at a finite distance \\(p\\) from the aperture plane, while the observation point is at distance \\(q\\), the corresponding approximation is\n\n\\[r_n^2\\approx n\\lambda\\frac{pq}{p+q}.\\]\n\nThis construction explains why enlarging an aperture does not necessarily increase the intensity at a particular point monotonically: newly admitted zones can partially cancel contributions already present.\n\nA Fresnel zone plate uses alternating transmitting and blocking zones, or controlled phase changes, to produce focusing by diffraction."
    },
    {
      "heading": "Historical development",
      "text": "Fresnel developed his diffraction theory during the 1810s by combining wavefront construction with quantitative interference calculations. His work helped establish a wave description of light against competing corpuscular accounts.\n\nDuring consideration of Fresnel’s memoir submitted to the French Academy of Sciences in 1818, Siméon Denis Poisson drew attention to the predicted bright point behind a circular obstacle. François Arago’s experimental observation of that point became a prominent demonstration of the theory. Fresnel’s memoir received the academy’s diffraction prize in 1819.\n\nThe integral now called the Fresnel diffraction integral belongs to a broader mathematical framework developed through later scalar diffraction theories. Its modern use is not limited to Fresnel’s original constructions."
    },
    {
      "heading": "Applications and computation",
      "text": "Fresnel propagation is used in several areas of optical science and engineering:\n\n- Digital holography: numerically propagating a recorded or recovered complex field to reconstruct objects at different depths.\n- Propagation-based phase-contrast imaging: converting spatial phase variations into measurable intensity variations after free-space propagation, including with X-rays.\n- Diffractive optical design: predicting the behavior of zone plates, phase masks, and other patterned optical elements.\n- Laser and imaging systems: analyzing aperture truncation, intermediate-plane fields, and propagation between optical components.\n- Metrology: using edge and aperture diffraction to infer dimensions, positions, or wavefront properties.\n\nNumerically, the Fresnel integral may be evaluated directly or through fast Fourier-transform methods. Correct sampling is essential: the quadratic phase can oscillate rapidly, and insufficient grid spacing or computational extent produces aliasing and other numerical artifacts."
    },
    {
      "heading": "Scope and limitations",
      "text": "The standard Fresnel integral is a scalar, monochromatic, paraxial model. Its principal limitations are:\n\n- Large propagation angles: nonparaxial fields require more general propagation methods.\n- Subwavelength structures: a scalar aperture transmission may not adequately describe interaction with the material.\n- High numerical aperture: vector fields and polarization effects can become important.\n- Very short distances: evanescent fields and detailed electromagnetic boundary conditions may be significant.\n- Partial coherence and broad spectra: intensities must be calculated with the appropriate source correlations and spectral averaging; the fully coherent monochromatic formula alone is insufficient.\n\nMore general approaches include angular-spectrum propagation, Rayleigh–Sommerfeld diffraction, and solutions of Maxwell’s equations. The choice depends on whether the main difficulty is propagation angle, coherence, polarization, or interaction with the diffracting structure."
    }
  ],
  "links": [
    "diffraction",
    "optics",
    "interference",
    "huygens-fresnel-principle",
    "fraunhofer-diffraction",
    "light",
    "fourier-transform",
    "x-ray",
    "metrology",
    "polarization",
    "maxwells-equations"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}