{
  "id": "free-expansion",
  "title": "Free Expansion",
  "lang": "en",
  "source_lang": "en",
  "summary": "Free expansion is the irreversible expansion of a gas into a vacuum, involving no external pressure–volume work and, when thermally isolated, no change in internal energy.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Joule expansion",
    "Unrestrained expansion"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/free-expansion/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/free-expansion/",
      "json": "https://aiwiki.page/zh/free-expansion.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Free expansion is the expansion of a gas into an initially evacuated region without opposing external pressure. It is a standard process in thermodynamics for distinguishing energy conservation from reversibility. In the usual idealized experiment, the gas is enclosed in a rigid, thermally insulated vessel and a partition is removed. No energy crosses the vessel boundary as heat or work, so the gas has the same internal energy before and after expansion. An ideal gas consequently has the same initial and final temperature, although a real gas need not."
    },
    {
      "heading": "Physical arrangement",
      "text": "A rigid vessel is divided into two compartments. One contains gas at an initial equilibrium volume \\(V_1\\), pressure \\(p_1\\), and temperature \\(T_1\\); the other is evacuated. When a valve is opened or the partition is removed, gas spreads into the empty compartment. After transient motion has subsided, the gas occupies the total accessible volume \\(V_2>V_1\\) and reaches a new thermodynamic equilibrium.\n\nThe defining condition is the absence of an opposing external pressure. Thermal insulation is a separate condition: expansion into a vacuum can occur even if heat is exchanged with the surroundings. Unless otherwise specified, the textbook expression “free expansion” usually refers to the insulated arrangement.\n\nDuring the expansion, the gas is not in mechanical equilibrium. Its density, velocity, and local temperature can vary throughout the vessel, and a single pressure or temperature may not describe the entire gas. Initial and final equilibrium states can nevertheless be compared using equilibrium thermodynamics."
    },
    {
      "heading": "Energy balance",
      "text": "For a closed system, the first law of thermodynamics can be written as\n\n\\[\\Delta U+\\Delta E_{\\mathrm{kin}}+\\Delta E_{\\mathrm{pot}}=Q-W,\\]\n\nwhere \\(U\\) is internal energy, \\(Q\\) is heat transferred into the system, and \\(W\\) is work done by it. The remaining terms represent macroscopic kinetic and potential energies.\n\nFor expansion against an external pressure, the pressure–volume contribution to work is\n\n\\[W_{\\mathrm{boundary}}=\\int_{V_1}^{V_2}p_{\\mathrm{ext}}\\,dV.\\]\n\nIn free expansion, \\(p_{\\mathrm{ext}}=0\\), so this contribution vanishes. Equivalently, if the entire rigid vessel is chosen as the system boundary, its outer boundary does not move and no boundary work is performed.\n\nFor an insulated vessel, heat transfer also vanishes. Assuming no other work interactions, no net change in gravitational potential energy, and no macroscopic motion in either equilibrium endpoint,\n\n\\[Q=0,\\qquad W=0,\\qquad \\Delta U=0.\\]\n\nThis result concerns the initial and final equilibrium states. During expansion, energy can temporarily be redistributed between disordered molecular motion and organized gas flow.\n\nThe gas pressure must not be substituted for \\(p_{\\mathrm{ext}}\\) in the work integral. Integrating an equilibrium expression such as \\(nRT/V\\) would calculate work for a different process: a quasistatic expansion against a resisting pressure."
    },
    {
      "heading": "Ideal-gas result",
      "text": "For an ideal gas of fixed composition, internal energy depends only on temperature. Therefore, insulated free expansion gives\n\n\\[U(T_2)=U(T_1), \\qquad T_2=T_1.\\]\n\nUsing the ideal-gas equation of state,\n\n\\[pV=nRT,\\]\n\nthe endpoint pressures satisfy\n\n\\[p_2=p_1\\frac{V_1}{V_2},\\]\n\nwhere \\(n\\) is the amount of gas and \\(R\\) is the gas constant. Doubling the accessible volume therefore halves the final pressure.\n\nThe equality \\(T_2=T_1\\) does not imply that the actual process passes through a sequence of uniform-temperature equilibrium states. It is an endpoint result. Free expansion is not equivalent to reversible isothermal expansion: in the latter, the gas performs work and must absorb heat to maintain its temperature."
    },
    {
      "heading": "Entropy and irreversibility",
      "text": "Free expansion is an irreversible process. Once the gas has reached equilibrium throughout the vessel, it does not spontaneously return to its original compartment. Restoring the initial state requires an external intervention that also affects the surroundings.\n\nFor an ideal gas, the change in entropy between equilibrium states is\n\n\\[\\Delta S = nC_{V,m}\\ln\\frac{T_2}{T_1} + nR\\ln\\frac{V_2}{V_1},\\]\n\nwhen the molar constant-volume heat capacity \\(C_{V,m}\\) is constant. Since the endpoint temperatures are equal,\n\n\\[\\Delta S=nR\\ln\\frac{V_2}{V_1}>0.\\]\n\nFor one mole expanding to twice its initial volume, this is approximately \\(5.76\\ \\mathrm{J\\,K^{-1}}\\).\n\nEntropy is a state function, so its change can be calculated along an imagined reversible path connecting the same endpoints. A reversible isothermal expansion gives the result above, even though the actual free expansion transfers no heat.\n\nThe equality \\(dS=\\delta Q/T\\) cannot be applied to an arbitrary irreversible process. For a closed system, the entropy balance is instead expressed as\n\n\\[\\Delta S=\\int\\frac{\\delta Q}{T_b}+S_{\\mathrm{gen}},\\]\n\nwhere \\(T_b\\) is the boundary temperature at which heat crosses and \\(S_{\\mathrm{gen}}\\) is entropy generated internally. In insulated free expansion,\n\n\\[S_{\\mathrm{gen}}=\\Delta S>0.\\]\n\nThis illustrates the second law of thermodynamics: the entropy of an isolated system can increase even though its energy remains constant."
    },
    {
      "heading": "Real gases and temperature change",
      "text": "For a real gas, internal energy can depend on both temperature and volume because intermolecular interactions contribute to its energy. Constant internal energy therefore does not generally imply constant temperature.\n\nFor a fixed amount of a simple compressible substance in a single equilibrium phase,\n\n\\[dU=C_V\\,dT+ \\left[ T\\left(\\frac{\\partial p}{\\partial T}\\right)_V-p \\right]dV,\\]\n\nwhere \\(C_V\\) is the total constant-volume heat capacity. The equilibrium constant-energy slope, called the Joule coefficient, is\n\n\\[\\mu_J= \\left(\\frac{\\partial T}{\\partial V}\\right)_U = \\frac{ p-T\\left(\\frac{\\partial p}{\\partial T}\\right)_V }{C_V}.\\]\n\nFor an ideal gas, the numerator vanishes. For a real gas, its sign determines whether increasing volume along an equilibrium constant-energy curve corresponds to cooling or warming. This curve relates possible equilibrium endpoints; it is not the actual nonequilibrium trajectory of the expanding gas.\n\nAs an illustration, the van der Waals equation\n\n\\[p=\\frac{nRT}{V-nb}-\\frac{an^2}{V^2}\\]\n\ngives\n\n\\[T\\left(\\frac{\\partial p}{\\partial T}\\right)_V-p =\\frac{an^2}{V^2}.\\]\n\nIf \\(C_V\\) is treated as constant, the constant-energy condition yields\n\n\\[T_2-T_1= \\frac{an^2}{C_V} \\left(\\frac{1}{V_2}-\\frac{1}{V_1}\\right).\\]\n\nFor expansion, this model predicts cooling: the increase in intermolecular potential energy is accompanied by a decrease in thermal energy. Actual temperature changes depend on the substance and initial conditions. Near a phase transition, a single-phase description may be insufficient."
    },
    {
      "heading": "Comparison with other expansion processes",
      "text": "Reversible adiabatic expansion\n\nAn adiabatic process involves no heat transfer, but it can still involve work. In reversible adiabatic expansion, a gas pushes against an external load, its internal energy decreases, and an ideal gas cools. For constant heat capacities,\n\n\\[pV^\\gamma=\\text{constant}, \\qquad TV^{\\gamma-1}=\\text{constant},\\]\n\nwhere \\(\\gamma=C_p/C_V\\).\n\nThese relations do not apply to free expansion. Both processes can be adiabatic, but only the reversible one is isentropic.\n\nJoule–Thomson expansion\n\nThe Joule–Thomson effect concerns gas flowing through a restriction, such as a porous plug or valve, from higher to lower pressure. Under the usual steady-flow assumptions of adiabatic operation, no shaft work, and negligible changes in kinetic and potential energy, enthalpy is conserved:\n\n\\[H_1=H_2.\\]\n\nInsulated free expansion in a rigid vessel instead conserves internal energy. Their temperature changes are consequently governed by different derivatives:\n\n\\[\\mu_J=\\left(\\frac{\\partial T}{\\partial V}\\right)_U, \\qquad \\mu_{JT}=\\left(\\frac{\\partial T}{\\partial p}\\right)_H.\\]\n\nThe two effects should not be identified merely because both involve expansion without useful work output."
    },
    {
      "heading": "Historical and microscopic significance",
      "text": "Free expansion is associated with experiments by James Prescott Joule investigating whether gas expansion into an evacuated vessel produced a measurable temperature change. Such experiments helped establish the relationship between the thermal properties of gases and their internal energy. Small real-gas temperature changes can be difficult to detect because the vessel and other apparatus also store thermal energy.\n\nIn statistical mechanics, the ideal-gas entropy increase follows from the enlarged volume available to molecular positions. For \\(N\\) classical, noninteracting particles, the volume-dependent factor in the accessible phase space is proportional to \\(V^N\\). Using the Boltzmann constant \\(k_B\\),\n\n\\[\\Delta S = k_B\\ln\\left(\\frac{V_2^N}{V_1^N}\\right) = Nk_B\\ln\\frac{V_2}{V_1}.\\]\n\nThe microscopic equations of motion need not themselves be irreversible. The macroscopic description identifies equilibrium with overwhelmingly probable distributions and does not track every molecular correlation. Free expansion thus provides a standard setting for examining how irreversible thermodynamic behavior emerges from microscopic dynamics."
    }
  ],
  "links": [
    "pressure",
    "thermodynamics",
    "thermodynamic-equilibrium",
    "density",
    "first-law-of-thermodynamics",
    "internal-energy",
    "work-physics",
    "heat",
    "ideal-gas",
    "temperature",
    "equation-of-state",
    "gas-constant",
    "entropy",
    "heat-capacity",
    "state-function",
    "second-law-of-thermodynamics",
    "van-der-waals-equation",
    "phase-transition",
    "adiabatic-process",
    "joule-thomson-effect",
    "enthalpy",
    "james-prescott-joule",
    "statistical-mechanics",
    "phase-space",
    "boltzmann-constant"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}