{
  "id": "free-body-diagram",
  "title": "Free-Body Diagram",
  "lang": "en",
  "source_lang": "en",
  "summary": "A free-body diagram isolates a body or system and represents the external forces and moments acting on it, providing a basis for equations of equilibrium or motion.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "FBD",
    "free body diagram",
    "force diagram"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/free-body-diagram/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/free-body-diagram/",
      "json": "https://aiwiki.page/zh/free-body-diagram.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A free-body diagram is a schematic representation of a selected object or system, isolated from its surroundings, showing the external forces and, where relevant, applied moments acting on it. It is a basic tool of classical mechanics for translating physical interactions into equations of equilibrium or motion. “Free” means that the body has been conceptually separated from its surroundings—not that it is unconstrained or experiences no forces."
    },
    {
      "heading": "Purpose and system boundary",
      "text": "A free-body diagram replaces the physical surroundings of a body with the mechanical actions they exert. A table is replaced by its contact force, a cable by its pull, and a support by the forces and moments it can transmit. This makes the diagram a statement of the mechanical model being analyzed rather than a complete picture of the physical scene.\n\nThe first decision is the system boundary. The selected system might be a single particle, a block, a machine component, or several connected bodies considered together. The boundary determines which interactions are external:\n\n- Forces exerted by objects outside the boundary appear on the diagram.\n- Interactions between parts entirely inside the boundary are internal and are not shown on a diagram of the complete system.\n- If the system is divided into separate bodies, the interactions across the newly exposed boundaries must appear on the corresponding diagrams.\n\nFor example, the contact force between two blocks is external to either block considered alone, but internal to the two-block system. Separate diagrams are useful for determining that contact force; a combined diagram can simplify determination of the system’s overall motion."
    },
    {
      "heading": "Elements of the diagram",
      "text": "Representation of the body\n\nThe body may be represented as a dot, a simple outline, or a more detailed sketch.\n\nA particle representation is appropriate when only translational motion matters. An extended-body representation is needed when force locations, dimensions, or rotational effects are important. For a rigid body, moving a force along its line of action preserves its external mechanical effect; moving it to a different line generally requires an additional couple moment to preserve equivalence.\n\nForces and moments\n\nForce arrows indicate direction and sense, with labels identifying magnitudes or unknown quantities. Their positions may also identify points of application. Arrow lengths need not be to scale unless the diagram explicitly uses a graphical scale.\n\nCommon forces include:\n\n- Weight: the gravitational force on the body. In an approximately uniform gravitational field, its magnitude is \\(mg\\), where \\(m\\) is mass and \\(g\\) is the local gravitational acceleration.\n- Normal contact force: a compressive force perpendicular to a contacting surface.\n- Friction: a tangential contact force opposing relative sliding or the tendency toward sliding.\n- Tension: the pulling force transmitted by a taut cable or string.\n- Elastic force: a force exerted by a deformed elastic element, such as a spring.\n- Fluid loading: forces associated with pressure and viscous stresses.\n- Electromagnetic forces: forces arising from interactions with an electric field or magnetic field.\n\nAn applied couple is usually drawn as a curved arrow. A couple produces a moment without a resultant force and cannot be represented by a single force arrow.\n\nSupport reactions\n\nRemoving a support from the sketch requires replacing it with the actions it can exert. In idealized planar models:\n\nSupport or connection | Reactions typically shown\nSmooth surface or roller | One force normal to the permitted contact surface\nPin or hinge | Two force components, but no resisting couple\nFixed support | Two force components and a resisting moment\nFlexible, taut cable | A tensile force along the cable\n\nThese are modeling assumptions, not universal properties of real joints. Three-dimensional supports can impose additional constraints, and real connections may have friction, compliance, or limited moment capacity."
    },
    {
      "heading": "Constructing a free-body diagram",
      "text": "A systematic construction proceeds as follows:\n\n- Choose the body or system. State what lies inside the boundary.\n- Draw the isolated body. Retain geometry needed for force directions and moment arms.\n- Identify external interactions. Include contact forces, forces acting at a distance, and applied couples.\n- Replace constraints with reactions. Use a support model consistent with the permitted motion.\n- Label forces and dimensions. Include angles and distances needed for equations.\n- Choose coordinate axes and a reference frame. Axes may be aligned with a slope, a member, or an expected direction of motion.\n- Write the governing equations. Keep force components and moment signs consistent with the chosen convention.\n\nAn unknown force direction may be assumed. A negative result then indicates that the actual direction is opposite to the assumed direction. For unilateral interactions, however, the result must also be checked against physical constraints: an ordinary cable cannot push, and a nonadhesive contact cannot sustain tension."
    },
    {
      "heading": "From diagrams to equations",
      "text": "Translational motion\n\nIn an inertial reference frame, Newton’s second law gives, for a constant-mass system,\n\n\\[\\sum \\mathbf F_{\\mathrm{ext}}=m\\mathbf a_G,\\]\n\nwhere \\(\\mathbf a_G\\) is the acceleration of the center of mass. In Cartesian components,\n\n\\[\\sum F_x=ma_{Gx},\\qquad \\sum F_y=ma_{Gy},\\qquad \\sum F_z=ma_{Gz}.\\]\n\nMore generally, the net external force equals the rate of change of the system’s momentum.\n\nRotational motion and equilibrium\n\nFor angular momentum about the center of mass,\n\n\\[\\sum \\boldsymbol{\\tau}_{G,\\mathrm{ext}} =\\frac{d\\mathbf L_G}{dt},\\]\n\nwith the derivative evaluated in an inertial frame. Here \\(\\mathbf L_G\\) is the system’s angular momentum about its center of mass.\n\nFor planar motion of a rigid body, this reduces to\n\n\\[\\sum M_G=I_G\\alpha,\\]\n\nwhere \\(I_G\\) is the moment of inertia about the perpendicular axis through the center of mass and \\(\\alpha\\) is angular acceleration.\n\nStatic equilibrium requires both zero resultant external force and zero resultant external moment:\n\n\\[\\sum \\mathbf F_{\\mathrm{ext}}=\\mathbf 0, \\qquad \\sum \\boldsymbol{\\tau}_{\\mathrm{ext}}=\\mathbf 0.\\]\n\nZero net force alone does not establish equilibrium for an extended body: two equal and opposite forces on different lines of action can form a couple."
    },
    {
      "heading": "Example: a block on an inclined plane",
      "text": "Consider a block of mass \\(m\\) on a plane inclined at angle \\(\\theta\\) above the horizontal. With no other applied loads, its diagram contains weight \\(mg\\), a normal force \\(N\\), and—if the surface is rough—a friction force \\(f\\).\n\nChoose axes parallel and perpendicular to the plane. The weight components are \\(mg\\sin\\theta\\) down the slope and \\(mg\\cos\\theta\\) into the plane. If the block has no acceleration perpendicular to the surface,\n\n\\[N=mg\\cos\\theta.\\]\n\nIf it slides downhill and a Coulomb kinetic-friction model applies,\n\n\\[f_k=\\mu_kN,\\]\n\nso its downhill acceleration satisfies\n\n\\[ma=mg\\sin\\theta-\\mu_kmg\\cos\\theta.\\]\n\nIf the block is at rest, static friction instead adjusts to the required value, subject to\n\n\\[|f_s|\\leq\\mu_sN.\\]\n\nThus, in this example, equilibrium requires \\(f_s=mg\\sin\\theta\\), provided that this does not exceed the limiting static friction. Static friction is not automatically equal to \\(\\mu_sN\\).\n\nThe diagram should show either the weight vector or its resolved components as the operative representation—not count both as independent forces."
    },
    {
      "heading": "Distributed loads and internal forces",
      "text": "An extended body may experience loading distributed over a length, area, or volume. A distributed load can often be replaced by an equivalent resultant force and moment for rigid-body analysis. For a parallel line load \\(w(x)\\),\n\n\\[R=\\int w(x)\\,dx.\\]\n\nIf \\(R\\neq0\\), its line of action is located by matching moments:\n\n\\[x_R=\\frac{\\int xw(x)\\,dx}{R}.\\]\n\nSuch a replacement preserves the resultant force and moment, but not necessarily local stresses or deformation.\n\nFree-body diagrams also expose internal forces through an imaginary cut. Isolating part of a beam requires showing the axial force, shear force, and bending moment transmitted across the cut. These quantities are internal to the original beam but external to the isolated portion."
    },
    {
      "heading": "Common errors and limitations",
      "text": "Frequent errors include omitting support reactions, assuming that the normal force always equals weight, or drawing friction opposite the object’s overall velocity rather than opposing relative slipping at the contact.\n\nAnother error is placing both members of a Newton’s-third-law pair on a single-body diagram. The force exerted by a table on a block belongs on the block’s diagram; the opposite force exerted by the block on the table belongs on the table’s diagram.\n\nVelocity and acceleration may be indicated separately for reference, but they are not forces. Likewise, “centripetal force” is generally the name for the inward resultant of actual forces, not an additional interaction.\n\nA free-body diagram does not supply material properties, friction laws, geometric compatibility, or deformation relationships. Some problems therefore require additional equations beyond force and moment balance. In an accelerating or rotating reference frame, inertial terms must also be handled explicitly; they should not be confused with physical interactions exerted by surrounding bodies."
    }
  ],
  "links": [
    "force",
    "torque",
    "classical-mechanics",
    "rigid-body",
    "gravity",
    "mass",
    "friction",
    "pressure",
    "electric-field",
    "magnetic-field",
    "inertial-reference-frame",
    "newtons-laws-of-motion",
    "center-of-mass",
    "momentum",
    "angular-momentum",
    "moment-of-inertia"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}