{
  "id": "etendue",
  "title": "Étendue",
  "lang": "en",
  "source_lang": "en",
  "summary": "Étendue measures the spatial and angular extent of a light beam and constrains how tightly passive optical systems can concentrate it.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Optical extent",
    "geometrical extent",
    "optical throughput"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/etendue/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/etendue/",
      "json": "https://aiwiki.page/zh/etendue.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Étendue is a quantity in optics that measures the combined area and angular spread occupied by a bundle of light rays, with a factor accounting for the refractive index of the medium. In ideal, lossless geometrical optics, étendue is conserved: reducing a beam’s cross-sectional area requires a corresponding increase in its angular spread. This conservation law sets fundamental limits on light collection, image brightness, solar concentration, and coupling between optical instruments."
    },
    {
      "heading": "Definition",
      "text": "For rays crossing a small surface element, the differential étendue is\n\n\\[\\mathrm{d}G=n^2\\cos\\theta\\,\\mathrm{d}A\\,\\mathrm{d}\\Omega,\\]\n\nwhere:\n\n- \\(n\\) is the refractive index of the medium;\n- \\(\\mathrm{d}A\\) is the surface area element;\n- \\(\\theta\\) is the angle between a ray’s direction and the surface normal;\n- \\(\\mathrm{d}\\Omega\\) is an element of solid angle around that direction.\n\nFor a complete ray bundle,\n\n\\[G=\\int_A\\int_{\\Omega(\\mathbf r)} n^2\\cos\\theta\\,\\mathrm{d}\\Omega\\,\\mathrm{d}A.\\]\n\nThe angular domain \\(\\Omega(\\mathbf r)\\) can vary with position on the surface. This matters because many beams have correlations between ray position and direction: not every direction occurs at every point.\n\nThe cosine factor accounts for projected area. A surface viewed obliquely presents a smaller collecting area than the same surface viewed face-on.\n\nÉtendue is normally expressed in square metres steradian, \\(\\mathrm{m^2\\,sr}\\). In the International System of Units, the steradian is dimensionless, so étendue has the physical dimension of area; retaining “sr” makes its angular meaning explicit.\n\nConventions\n\nSome authors define geometrical extent without the refractive-index factor:\n\n\\[G_0=\\int_A\\int_{\\Omega(\\mathbf r)} \\cos\\theta\\,\\mathrm{d}\\Omega\\,\\mathrm{d}A.\\]\n\nIn a uniform medium, \\(G=n^2G_0\\). Under this convention, \\(n^2G_0\\), rather than \\(G_0\\) alone, is conserved when rays pass between media. The word throughput is also used for étendue, although in other contexts it means transmitted power or transmission efficiency. Definitions therefore need to be checked when comparing formulas."
    },
    {
      "heading": "Common geometries",
      "text": "Uniform circular cone\n\nConsider an area \\(A\\) in a uniform medium, with every point accepting all directions in a circular cone of half-angle \\(\\alpha\\) about the surface normal. Its étendue is\n\n\\[G=n^2A \\int_0^{2\\pi}\\int_0^\\alpha \\cos\\theta\\sin\\theta\\,\\mathrm{d}\\theta\\,\\mathrm{d}\\phi =\\pi n^2A\\sin^2\\alpha.\\]\n\nUsing the numerical aperture, \\(\\mathrm{NA}=n\\sin\\alpha\\),\n\n\\[G=\\pi A\\,\\mathrm{NA}^2.\\]\n\nThis expression applies only when the stated area and angular cone are fully accepted. An obscured, vignetted, or position-dependent acceptance generally requires the full integral.\n\nFor a narrow cone, \\(\\sin\\alpha\\approx\\alpha\\) and its solid angle is approximately \\(\\pi\\alpha^2\\). Thus,\n\n\\[G\\approx n^2A\\Omega.\\]\n\nThe familiar area–solid-angle product is therefore a small-angle approximation unless \\(\\Omega\\) is explicitly understood as a projected solid angle.\n\nHemispherical emission\n\nA surface emitting into all directions of one hemisphere has\n\n\\[G=\\pi n^2A.\\]\n\nThe factor is \\(\\pi\\), not \\(2\\pi\\), because étendue includes the cosine projection. A Lambertian surface, whose radiance is direction-independent, is an important example of emission occupying this hemispherical domain.\n\nExchange between two surfaces\n\nFor two mutually visible surface elements separated by distance \\(r\\) in a uniform medium,\n\n\\[\\mathrm{d}G =n^2\\frac{\\cos\\theta_1\\cos\\theta_2}{r^2} \\,\\mathrm{d}A_1\\,\\mathrm{d}A_2.\\]\n\nHere \\(\\theta_1\\) and \\(\\theta_2\\) are measured from the respective surface normals. The symmetry between the surfaces underlies reciprocity relations used in radiative transfer."
    },
    {
      "heading": "Conservation and optical invariants",
      "text": "In lossless geometrical optics, propagation through free space, ideal reflection, and refraction preserves the étendue of a ray bundle. Focusing changes the balance between beam area and angular spread, but not their combined optical extent.\n\nFor example, an imaging system that reduces a source’s image area must increase the range of ray directions at the image if it transmits the complete bundle. A small image does not by itself imply that all the original light can enter a narrow-angle detector or optical fibre.\n\nThe factor \\(n^2\\) accounts for changes in angular spread across refracting interfaces. Rays entering a higher-index medium can occupy a narrower cone without violating conservation.\n\nPhase-space interpretation\n\nA ray crossing a plane can be described by two transverse position coordinates and two direction-related coordinates. Étendue measures a volume in this four-dimensional optical phase space.\n\nFor a plane normal to the \\(z\\)-axis, define optical momentum coordinates\n\n\\[p_x=n s_x,\\qquad p_y=n s_y,\\]\n\nwhere \\(s_x\\) and \\(s_y\\) are transverse components of the ray’s unit direction vector. For forward-going rays,\n\n\\[\\mathrm{d}G =\\mathrm{d}x\\,\\mathrm{d}y\\,\\mathrm{d}p_x\\,\\mathrm{d}p_y.\\]\n\nIdeal optical propagation preserves this phase-space volume, an optical counterpart of Liouville’s theorem in Hamiltonian mechanics. This makes étendue more general than a simple product of a beam diameter and a divergence angle.\n\nThe Lagrange optical invariant is closely related. In a centered, paraxial imaging system, a combination of the heights and angles of two rays remains constant. It describes a meridional constraint, whereas étendue describes the full spatial and angular extent of a bundle; the two are related but are not interchangeable quantities.\n\nLosses and scattering\n\nConservation applies to an identified bundle of rays under the stated ideal conditions. An aperture can remove rays and thereby reduce both transmitted power and transmitted étendue. It does not compress the full input bundle into a smaller optical phase-space volume.\n\nScattering and diffusers can spread radiation over additional directions, increasing its effective occupied étendue and generally reducing its radiance. Absorption can reduce power without changing the geometrical domain occupied by the surviving rays. These distinctions are important when interpreting the shorthand statement that “étendue cannot decrease.”"
    },
    {
      "heading": "Radiance and the brightness theorem",
      "text": "Radiance \\(L\\) is radiant power per unit projected area per unit solid angle:\n\n\\[\\mathrm{d}\\Phi =L\\cos\\theta\\,\\mathrm{d}A\\,\\mathrm{d}\\Omega,\\]\n\nwhere \\(\\Phi\\) is radiant flux. Consequently,\n\n\\[\\mathrm{d}\\Phi=\\frac{L}{n^2}\\,\\mathrm{d}G.\\]\n\nFor uniform radiance in a uniform medium,\n\n\\[\\Phi=\\frac{L}{n^2}G.\\]\n\nConservation of power and étendue implies conservation of reduced radiance, \\(L/n^2\\), along a ray in a transparent, lossless optical system. At a refracting interface, radiance itself can change with \\(n^2\\); reflection and absorption losses must be treated separately.\n\nThis result is commonly called the brightness theorem. Passive optical rearrangement cannot increase reduced radiance above that supplied by the source. A lens can increase irradiance—the power incident per unit receiving area—by gathering light from a larger area and delivering it through a wider cone of directions. That does not increase radiance.\n\nThe theorem concerns passive transport under geometrical-optics assumptions. Optical amplification and the generation or wavelength conversion of light require additional analysis rather than direct application of this statement."
    },
    {
      "heading": "Limits on optical concentration",
      "text": "Étendue conservation places a maximum on how much an extended source can be concentrated while retaining all accepted rays.\n\nFor an ideal three-dimensional concentrator accepting a complete circular cone of half-angle \\(\\alpha\\), let \\(A_{\\mathrm{in}}\\) be its entrance area and \\(A_{\\mathrm{out}}\\) its receiving area. If the input medium has index \\(n_{\\mathrm{in}}\\),\n\n\\[G_{\\mathrm{in}} =\\pi n_{\\mathrm{in}}^2 A_{\\mathrm{in}}\\sin^2\\alpha.\\]\n\nThe largest output étendue available over the receiving hemisphere is\n\n\\[G_{\\mathrm{out,max}} =\\pi n_{\\mathrm{out}}^2 A_{\\mathrm{out}}.\\]\n\nTransmitting the whole accepted bundle therefore requires\n\n\\[\\frac{A_{\\mathrm{in}}}{A_{\\mathrm{out}}} \\leq \\frac{n_{\\mathrm{out}}^2} {n_{\\mathrm{in}}^2\\sin^2\\alpha}.\\]\n\nIn the same medium on both sides, the maximum area concentration is \\(1/\\sin^2\\alpha\\). A source with a larger angular extent has a lower maximum concentration.\n\nThis limit is central to solar concentrators: the Sun has a finite apparent angular size, so even ideal optics cannot focus all direct sunlight onto an arbitrarily small receiver. Practical concentration is lower because of imperfect surfaces, alignment errors, finite acceptance margins, and transmission losses. Two-dimensional, line-focusing concentrators obey a different concentration relation."
    },
    {
      "heading": "Applications",
      "text": "Imaging and astronomy\n\nIn telescopes, collecting area determines how much light enters, while field of view determines the angular region observed. Their product is often used as a survey-speed indicator and called the instrument’s étendue. For small fields in air it approximates the accepted geometrical étendue, although actual performance also depends on transmission, image quality, detector properties, and observing conditions.\n\nIn microscopy, the area imaged and the accepted numerical aperture jointly determine the collected optical extent. Magnification trades image area against angular spread rather than creating additional brightness.\n\nSpectroscopy\n\nIn spectroscopy, entrance slits, pupils, dispersing elements, and detectors constrain the accepted ray bundle. Enlarging an entrance slit can admit more light but may degrade spectral resolution. Étendue provides a way to distinguish collection capacity from optical transmission efficiency and resolving power.\n\nFibre coupling and illumination\n\nFor a multimode optical fibre with core area \\(A\\) and approximately uniform acceptance cone, its geometrical acceptance is often estimated as\n\n\\[G\\approx\\pi A\\,\\mathrm{NA}^2.\\]\n\nA source occupying a larger étendue cannot be coupled completely into that acceptance by ideal passive optics alone.\n\nThe same constraint governs projectors and illumination systems. Efficient design requires matching the source’s spatial and angular distribution to the acceptance of the modulator, relay optics, and target. Matching a spot size without matching its angular distribution can still produce substantial losses."
    },
    {
      "heading": "Diffraction and limits of the ray description",
      "text": "Geometrical étendue is most directly useful when optical dimensions are large compared with the wavelength. Near the diffraction limit, wave structure and spatial coherence become essential.\n\nFor a single transverse spatial mode, the characteristic étendue is of order\n\n\\[G\\sim\\lambda_0^2,\\]\n\nwhere \\(\\lambda_0\\) is the vacuum wavelength. Precise numerical factors depend on definitions of beam area, angular width, mode counting, and polarization. A multimode field can occupy many such spatial-mode cells.\n\nA Gaussian beam illustrates the associated trade-off: reducing its waist increases its far-field divergence. Its intensity distribution has no sharp boundary, however, so assigning a finite geometrical étendue requires a specified beam-width or enclosed-power convention.\n\nÉtendue alone does not specify an optical field’s coherence, spectrum, polarization, or wavefront quality. Fields with similar area–angle products can therefore differ substantially in their diffraction-limited coupling and imaging performance."
    }
  ],
  "links": [
    "optics",
    "light",
    "refractive-index",
    "international-system-of-units",
    "numerical-aperture",
    "radiative-transfer",
    "reflection-optics",
    "refraction",
    "phase-space",
    "hamiltonian-mechanics",
    "scattering",
    "radiance",
    "sun",
    "telescope",
    "microscope",
    "spectroscopy",
    "optical-fiber",
    "diffraction"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}