{
  "id": "equivalent-series-resistance",
  "title": "Equivalent Series Resistance",
  "lang": "en",
  "source_lang": "en",
  "summary": "Equivalent series resistance represents a component’s dissipative losses as a resistance in series with an ideal reactive element at specified operating conditions.",
  "category": "technology",
  "subcategory": "engineering",
  "type": "concept",
  "aliases": [
    "ESR",
    "Effective series resistance"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/equivalent-series-resistance/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/equivalent-series-resistance/",
      "json": "https://aiwiki.page/zh/equivalent-series-resistance.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Equivalent series resistance (ESR) is the resistance used in an equivalent circuit to represent the dissipative losses of a real electrical component, most commonly a capacitor. Instead of modeling every physical loss mechanism separately, the component is represented by an ideal reactive element together with a series resistor and, where necessary, additional parasitic elements. ESR is measured in ohms and depends on frequency, temperature, and sometimes operating voltage or signal amplitude. It is not necessarily the resistance that would be measured with a direct-current ohmmeter."
    },
    {
      "heading": "Definition and equivalent circuit",
      "text": "A real component has a complex electrical impedance, written at a specified angular frequency \\(\\omega\\) as\n\n\\[Z(\\omega)=R(\\omega)+jX(\\omega),\\]\n\nwhere \\(R\\) is the resistive part, \\(X\\) is the reactive part, and \\(j\\) is the imaginary unit. In a series equivalent circuit, the ESR is the real part of the component’s terminal impedance:\n\n\\[R_{\\mathrm{ESR}}(\\omega)=\\operatorname{Re}\\{Z(\\omega)\\}.\\]\n\nThis definition applies at a specified operating point and within a model appropriate to the component. It does not imply that a single, frequency-independent physical resistor accounts for all losses.\n\nA common model for a capacitor consists of an ideal capacitance \\(C\\), an ESR, and an equivalent series inductance \\(L_{\\mathrm{ESL}}\\):\n\n\\[Z(\\omega)\\approx R_{\\mathrm{ESR}} +j\\left(\\omega L_{\\mathrm{ESL}}-\\frac{1}{\\omega C}\\right).\\]\n\nThe model may also include a parallel resistance to represent leakage. More elaborate models use several resistive and reactive branches to reproduce behavior over a wide frequency range.\n\nBelow the capacitor’s self-resonant frequency, its impedance is usually predominantly capacitive. At self-resonance, the capacitive and inductive reactances cancel in the simple model, leaving an impedance approximately equal to ESR. Above self-resonance, the component behaves predominantly inductively. A low ESR therefore does not, by itself, guarantee low impedance at every frequency."
    },
    {
      "heading": "Physical origins",
      "text": "ESR combines losses from several mechanisms:\n\n- Conductive losses: resistance in electrodes, foils, internal connections, terminations, and leads.\n- Electrolyte resistance: losses associated with ionic conduction, especially in an electrolytic capacitor.\n- Dielectric losses: dissipation within the insulating material as its polarization responds to an alternating electric field.\n- Frequency-dependent conductor effects: changes in current distribution, including skin and proximity effects where relevant.\n\nThe relative importance of these mechanisms depends on construction and operating conditions. For example, liquid-electrolyte aluminum capacitors can show substantially increased ESR at low temperatures because electrolyte conductivity decreases. Conductive-polymer electrolytic capacitors often have lower ESR than comparable liquid-electrolyte types, but actual values depend on the particular product.\n\nA ceramic capacitor or film capacitor can also have ESR, even though it contains no liquid electrolyte. Their losses arise from electrode resistance, dielectric behavior, and connections. Describing a capacitor as “low ESR” is meaningful only in relation to its capacitance, construction, frequency range, and intended use.\n\nESR is distinct from leakage resistance. Leakage describes a conductive path across a capacitor’s terminals under an applied voltage; ESR describes dissipation represented in series with the reactive element. A capacitor may have low leakage but appreciable ESR, or the reverse."
    },
    {
      "heading": "Relationship to dissipation factor and quality factor",
      "text": "For a capacitor represented at a given frequency by a series capacitance \\(C_s\\) and ESR, with series inductance negligible, the dissipation factor is\n\n\\[D=\\tan\\delta=\\omega C_sR_{\\mathrm{ESR}},\\]\n\nwhere \\(\\delta\\) is the loss angle. Thus,\n\n\\[R_{\\mathrm{ESR}}=\\frac{D}{2\\pi fC_s}.\\]\n\nThe corresponding quality factor is\n\n\\[Q=\\frac{1}{D} =\\frac{1}{\\omega C_sR_{\\mathrm{ESR}}}.\\]\n\nThese relationships require quantities measured at the same frequency and under compatible conditions. They should not be applied indiscriminately near self-resonance, where inductance is significant.\n\nSeries and parallel equivalent resistances are not interchangeable. For example, an ideal capacitance \\(C_p\\) in parallel with a resistance \\(R_p\\) has an equivalent series resistance\n\n\\[R_s=\\frac{R_p}{1+(\\omega R_pC_p)^2}.\\]\n\nThe series resistance is therefore frequency-dependent even when the elements of the parallel model are constant. This illustrates why a quoted equivalent-circuit parameter must be interpreted together with its model and measurement conditions."
    },
    {
      "heading": "Heating and ripple current",
      "text": "Alternating current through ESR produces heat. For a sinusoidal current with root-mean-square value \\(I_{\\mathrm{rms}}\\), the average dissipated power is\n\n\\[P_{\\mathrm{loss}}=I_{\\mathrm{rms}}^2R_{\\mathrm{ESR}}.\\]\n\nIf a current waveform contains harmonics and ESR varies significantly with frequency, a more appropriate expression for a linear component is\n\n\\[P_{\\mathrm{loss}} =\\sum_n I_{n,\\mathrm{rms}}^2R_{\\mathrm{ESR}}(f_n).\\]\n\nConsequently, two waveforms with the same total RMS current can produce different heating if their frequency content differs.\n\nCapacitor ripple-current ratings reflect thermal constraints as well as electrical construction. Internal temperature rise depends on power loss, package dimensions, mounting, airflow, and heat transfer to the surrounding circuit board. Ratings specified at one frequency or ambient temperature cannot necessarily be transferred unchanged to another condition.\n\nIn liquid-electrolyte capacitors, prolonged elevated internal temperature can accelerate electrolyte loss and other aging processes. Increasing ESR can then increase heating for a given ripple current. Nevertheless, ESR alone does not determine service life: applied voltage, temperature history, sealing, and construction also matter."
    },
    {
      "heading": "Effects in electronic circuits",
      "text": "Power supplies and transient response\n\nIn a switched-mode power supply, capacitor ESR contributes to output-voltage ripple. A change in capacitor current produces an approximately immediate ESR-related voltage change:\n\n\\[\\Delta V_{\\mathrm{ESR}}\\approx\\Delta I_C R_{\\mathrm{ESR}}.\\]\n\nThis occurs alongside the slower voltage change caused by charging or discharging the capacitance. Very fast transitions may also produce voltage excursions associated with series inductance.\n\nFor example, a \\(2\\,\\mathrm{A}\\) change in capacitor current through an ESR of \\(20\\,\\mathrm{m\\Omega}\\) produces an ESR-related voltage change of about \\(40\\,\\mathrm{mV}\\). This is only one contribution to the complete transient response.\n\nLow-ESR capacitors are widely used in DC–DC converters and other power electronics equipment. However, replacing a capacitor with a lower-ESR type does not always preserve circuit behavior.\n\nFeedback stability\n\nIn some regulator circuits, output-capacitor ESR introduces a zero into the transfer function. For a simple series-\\(RC\\) capacitor model, its frequency is\n\n\\[f_z=\\frac{1}{2\\pi CR_{\\mathrm{ESR}}}.\\]\n\nThis zero can affect the phase response of a negative-feedback control loop. Certain regulator designs require an output capacitor within a specified ESR range, whereas others are designed for very low-ESR ceramic capacitors. Compatibility depends on the regulator’s compensation and operating conditions, not simply on minimizing resistance.\n\nFiltering and resonance\n\nESR adds damping to resonant circuits and filter networks. Reducing it can improve efficiency and reduce voltage drop, but can also increase the quality factor and produce stronger resonance or ringing. In a filter, the relevant design quantity is the complete impedance network, including interconnections and source and load impedances."
    },
    {
      "heading": "Measurement and interpretation",
      "text": "ESR can be measured using an LCR meter, an impedance analyzer, or a dedicated ESR meter. Instruments generally apply an alternating test signal and infer resistance from voltage, current, and phase, or from a transient response. A common test frequency for dedicated ESR meters is \\(100\\,\\mathrm{kHz}\\), but instrument methods and frequencies vary.\n\nMeaningful comparisons require attention to:\n\n- Frequency: ESR values at \\(120\\,\\mathrm{Hz}\\), \\(1\\,\\mathrm{kHz}\\), and \\(100\\,\\mathrm{kHz}\\) need not be similar.\n- Temperature: especially important for electrolyte-based components.\n- Test amplitude and DC bias: these can affect the component’s operating point and measured parameters.\n- Fixture effects: contact resistance and lead inductance can be comparable to the quantity being measured.\n- Equivalent-circuit selection: series and parallel instrument readings may represent different parameters.\n\nFour-terminal or four-terminal-pair measurement arrangements can reduce errors when measuring very low impedances. Appropriate calibration and fixture compensation are important to controlling measurement uncertainty.\n\nIn-circuit measurements have an additional limitation: parallel capacitors and other current paths can make a degraded component appear to have low ESR. Conversely, poor contacts can produce an artificially high reading. ESR testing also does not by itself establish capacitance, leakage, insulation integrity, or voltage withstand capability."
    },
    {
      "heading": "Use beyond conventional capacitors",
      "text": "The series-loss concept also applies to inductors and resonators. An inductor’s effective AC series resistance can include winding and magnetic-core losses and may differ substantially from its DC winding resistance.\n\nFor a supercapacitor, ESR is important because it contributes to the immediate terminal-voltage drop under load and limits power delivery. In a battery, related quantities are usually described as internal resistance or impedance. Their measured values depend on temperature, state of charge, frequency, or pulse duration, so a single series resistance cannot represent every aspect of electrochemical behavior."
    }
  ],
  "links": [
    "capacitor",
    "resistor",
    "electrical-impedance",
    "inductance",
    "electrolytic-capacitor",
    "polymer",
    "ceramic-capacitor",
    "film-capacitor",
    "heat",
    "switched-mode-power-supply",
    "dc-dc-converter",
    "power-electronics",
    "transfer-function",
    "negative-feedback",
    "signal-filter",
    "calibration",
    "measurement-uncertainty",
    "supercapacitor",
    "battery"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}