{
  "id": "energy-density",
  "title": "Energy Density",
  "lang": "en",
  "source_lang": "en",
  "summary": "Energy density measures energy per unit volume, or, in some engineering contexts, per unit mass, and is used to describe fields, fuels, and storage systems.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Volumetric energy density",
    "Gravimetric energy density"
  ],
  "generated_at": "2026-10-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/energy-density/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/energy-density/",
      "json": "https://aiwiki.page/zh/energy-density.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Energy density is the amount of energy contained in a specified volume. In engineering, the term also sometimes denotes energy per unit mass, although specific energy is the more precise name for that quantity. The distinction matters: a substance may store considerable energy relative to its weight but require substantial space. Energy density describes both energy distributed through physical fields and energy available from fuels or storage devices. Its meaning therefore depends on the energy being counted and the boundary of the system. (openstax.org)"
    },
    {
      "heading": "Definitions and units",
      "text": "For a uniform system, volumetric energy density is\n\n\\[u=\\frac{E}{V},\\]\n\nwhere \\(E\\) is energy and \\(V\\) is volume. In the International System of Units, its unit is the joule per cubic metre, J/m³. This has the same dimensions as pressure: one J/m³ equals one pascal. Dimensional equivalence does not mean that energy density and pressure are physically interchangeable. (nist.gov)\n\nFor a nonuniform distribution, a local density \\(u(\\mathbf{x},t)\\) describes how energy varies with position and time. The energy within a region is obtained through a volume integral:\n\n\\[E=\\int_V u(\\mathbf{x},t)\\,dV.\\]\n\nThis approach is used, for example, to calculate energy stored in a spatially varying magnetic field. (openstax.org)\n\nSpecific energy is \\(e=E/m\\), normally expressed in J/kg. For a uniform material with mass density \\(\\rho=m/V\\), the definitions give \\(u=\\rho e\\). Storage engineering also uses Wh/kg and Wh/L. By unit conversion, one Wh equals 3,600 J, and one Wh/L equals 3.6 MJ/m³. The labels gravimetric and volumetric identify which denominator is intended. (nist.gov)"
    },
    {
      "heading": "Energy in electromagnetic fields",
      "text": "In electromagnetism, energy density describes energy associated with fields rather than with a combustible material. In vacuum, the combined density of an electric field and a magnetic field is\n\n\\[u=\\frac{\\varepsilon_0}{2}|\\mathbf{E}|^2+ \\frac{1}{2\\mu_0}|\\mathbf{B}|^2,\\]\n\nwhere \\(\\varepsilon_0\\) and \\(\\mu_0\\) are the vacuum permittivity and permeability. Each contribution depends on the square of the corresponding field strength. The electric and magnetic contributions need not be equal for arbitrary fields. (openstax.org)\n\nFor a plane wave of electromagnetic radiation in vacuum, the two contributions are equal. Its time-averaged intensity satisfies\n\n\\[I=c\\langle u\\rangle,\\]\n\nwhere \\(c\\) is the speed of light. Energy density measures energy present per volume; intensity measures energy transported per area per time. Thus, doubling both field amplitudes quadruples the wave’s energy density and intensity. (openstax.org)"
    },
    {
      "heading": "Fuels and heating values",
      "text": "Fuel energy density generally refers to energy released by a chemical reaction, commonly combustion. Comparisons must distinguish higher heating value from lower heating value. Higher heating value includes energy recovered when the water produced by combustion condenses; lower heating value treats that water as vapor. Values based on these different conventions should not be mixed without adjustment. (afdc.energy.gov)\n\nHydrogen illustrates the difference between mass-based and volume-based measures. Using lower heating values, the U.S. Department of Energy gives approximately 120 MJ/kg for hydrogen and 44 MJ/kg for gasoline. Yet liquid hydrogen contains approximately 8 MJ/L, compared with approximately 32 MJ/L for gasoline. Hydrogen therefore exceeds gasoline on a fuel-mass basis but not on a liquid-volume basis. These figures describe the fuels themselves, not complete storage systems or delivered mechanical energy. (energy.gov)\n\nStorage conditions also matter. Compressing a gas or liquefying it changes the amount of fuel held in a given volume. Tanks, insulation, valves, and other equipment add mass and occupy space. A system-level value therefore differs from a material-only value, and gaseous-fuel comparisons must specify temperature and pressure. (energy.gov)"
    },
    {
      "heading": "Batteries and system boundaries",
      "text": "For a battery, energy density relates stored or deliverable electrical energy to its mass or volume. A lithium-ion battery can be assessed at the active-material, cell, module, or pack level. These are different measurement boundaries, not interchangeable descriptions of one performance value. (energy.gov)\n\nAn electrode material may exhibit high energy-storage potential, but a complete cell also requires current collectors, separators, electrolyte, and casing. A pack adds structural protection, connections, monitoring electronics, and temperature-control equipment. These components generally reduce energy density relative to the active materials alone. Consequently, a meaningful comparison identifies the level being measured and whether the numerator represents nominal stored energy or usable output. (energy.gov)"
    },
    {
      "heading": "Thermal storage",
      "text": "In thermodynamics, thermal-storage capacity can be expressed as energy transferred over a specified operating interval. For sensible heat storage without a phase change, approximately constant density and specific heat capacity give\n\n\\[\\frac{Q}{V}\\approx\\rho c_p\\Delta T.\\]\n\nThis follows from \\(Q=mc_p\\Delta T\\), with \\(c_p\\) appropriate to constant-pressure heating. The result depends on the temperature interval, not simply on the material’s identity. (openstax.org)\n\nA phase transition can store or release latent heat without a corresponding temperature change during the transition. For a complete transition, \\(Q=mL\\), where \\(L\\) is the specific latent heat; division by a chosen reference volume gives \\(Q/V=\\rho L\\). If the material changes volume, the stated density and volume basis must be consistent. (openstax.org)"
    },
    {
      "heading": "Energy density versus power density",
      "text": "Power density describes the rate of energy delivery per mass or volume, rather than the amount stored. A battery with substantial stored energy does not necessarily deliver it rapidly: power is limited by how quickly energy can reach the electrical load. (www1.eere.energy.gov)\n\nEnergy density is therefore only one storage-performance measure. Battery research also evaluates safety, operating life, and cost; hydrogen-storage assessments additionally consider delivery rates, efficiency, durability, and fuel quality. Comparisons are most informative when they state the energy convention, storage conditions, system boundary, and usable-energy basis. (energy.gov)"
    }
  ],
  "links": [
    "energy",
    "mass",
    "international-system-of-units",
    "joule",
    "pressure",
    "integral",
    "electromagnetism",
    "electric-field",
    "magnetic-field",
    "electromagnetic-radiation",
    "speed-of-light",
    "chemical-reaction",
    "water",
    "hydrogen",
    "temperature",
    "battery",
    "lithium-ion-battery",
    "electrode",
    "electrolyte",
    "thermodynamics",
    "sensible-heat",
    "heat-capacity",
    "phase-transition",
    "latent-heat",
    "power-density"
  ],
  "sources": [
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/16-3-energy-carried-by-ele…",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/16-3-energy-carried-by-electromagnetic-waves"
    },
    {
      "title": "nist.gov/pml/special-publication-330/sp-330-section-2",
      "url": "https://www.nist.gov/pml/special-publication-330/sp-330-section-2"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/14-3-energy-in-a-magnetic-…",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/14-3-energy-in-a-magnetic-field"
    },
    {
      "title": "afdc.energy.gov/files/u/publication/TEDB_Ed_40.pdf",
      "url": "https://afdc.energy.gov/files/u/publication/TEDB_Ed_40.pdf"
    },
    {
      "title": "energy.gov/cmei/fuels/hydrogen-storage",
      "url": "https://www.energy.gov/cmei/fuels/hydrogen-storage"
    },
    {
      "title": "energy.gov/sites/default/files/2022-10/17-Advanced_Batteries.pdf",
      "url": "https://www.energy.gov/sites/default/files/2022-10/17-Advanced_Batteries.pdf"
    },
    {
      "title": "openstax.org/books/physics/pages/11-2-heat-specific-heat-and-heat-transfer",
      "url": "https://openstax.org/books/physics/pages/11-2-heat-specific-heat-and-heat-transfer"
    },
    {
      "title": "openstax.org/books/college-physics/pages/14-3-phase-change-and-latent-heat",
      "url": "https://openstax.org/books/college-physics/pages/14-3-phase-change-and-latent-heat"
    },
    {
      "title": "www1.eere.energy.gov/analysis/pdfs/2013_bca_vto_edvs.pdf",
      "url": "https://www1.eere.energy.gov/analysis/pdfs/2013_bca_vto_edvs.pdf"
    },
    {
      "title": "energy.gov/cmei/vehicles/exploratory-battery-materials-rd",
      "url": "https://www.energy.gov/cmei/vehicles/exploratory-battery-materials-rd"
    }
  ],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}