{
  "id": "electrical-conductance",
  "title": "Electrical Conductance",
  "lang": "en",
  "source_lang": "en",
  "summary": "Electrical conductance measures how readily a component or conducting path carries electric current, and is the reciprocal of resistance.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Conductance"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/electrical-conductance/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/electrical-conductance/",
      "json": "https://aiwiki.page/zh/electrical-conductance.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Electrical conductance is a measure of how readily a component, device, or conducting path carries electric current in response to an applied voltage. For a resistive element, conductance \\(G\\) is the reciprocal of electrical resistance \\(R\\), so \\(G=1/R\\). Its unit in the International System of Units (SI) is the siemens, equivalent to one ampere per volt. Conductance describes a particular electrical path, including its dimensions and contacts; it is distinct from electrical conductivity, which characterizes the local electrical response of a material."
    },
    {
      "heading": "Definition and units",
      "text": "For an element obeying Ohm’s law,\n\n\\[I=GV,\\qquad G=\\frac{I}{V}=\\frac{1}{R},\\]\n\nwhere \\(I\\) is current and \\(V\\) is the potential difference, or voltage, across the element. A larger conductance means that a given voltage produces a larger current.\n\nThe siemens, symbol \\(\\mathrm{S}\\), is defined by\n\n\\[1\\,\\mathrm{S}=1\\,\\mathrm{A/V}=1\\,\\Omega^{-1}.\\]\n\nFor example, a \\(100\\,\\Omega\\) resistor has a conductance of \\(0.01\\,\\mathrm{S}\\), or \\(10\\,\\mathrm{mS}\\). Applied across \\(5\\,\\mathrm{V}\\), it carries \\(50\\,\\mathrm{mA}\\), assuming its resistance remains constant.\n\nThe older unit name mho, formed by reversing “ohm,” represents the same quantity and was written with the inverted-ohm symbol \\(\\mho\\). The name siemens honors Werner von Siemens and was adopted as an SI derived-unit name in 1971.\n\nFor an ideal open circuit, conductance is zero. An ideal short circuit is represented by zero resistance, corresponding to conductance that increases without bound. Real measurements are limited by leakage paths, contact resistance, heating, and instrument range."
    },
    {
      "heading": "Conductance and conductivity",
      "text": "Electrical conductivity, usually denoted \\(\\sigma\\), relates local current density \\(\\mathbf{J}\\) to the electric field \\(\\mathbf{E}\\). For an isotropic material in the linear regime,\n\n\\[\\mathbf{J}=\\sigma\\mathbf{E}.\\]\n\nFor a uniform conductor of length \\(L\\), cross-sectional area \\(A\\), and conductivity \\(\\sigma\\),\n\n\\[G=\\sigma\\frac{A}{L}.\\]\n\nThus, a thicker wire has greater conductance, while a longer wire has smaller conductance, provided the material and other conditions remain unchanged. Conductivity has SI unit \\(\\mathrm{S/m}\\), rather than \\(\\mathrm{S}\\).\n\nThis simple geometrical relation assumes a uniform cross section, uniform material properties, approximately uniform current flow, and negligible contact effects. More complicated shapes require solving for the potential and current distribution. In anisotropic materials, conductivity is a tensor, so the current density need not point in the same direction as the electric field.\n\nConductance is therefore not an intrinsic material property. Two pieces of the same material can have different conductances because their dimensions or contact configurations differ."
    },
    {
      "heading": "Physical origins and temperature dependence",
      "text": "Electrical conduction results from the motion of charge carriers. In metals, the mobile carriers are electrons; in a semiconductor, both electrons and electron holes can contribute. In an electrolyte, current is carried by positive and negative ions.\n\nFor independent carrier populations in a simple drift model,\n\n\\[\\sigma=\\sum_i n_i |q_i|\\mu_i,\\]\n\nwhere \\(n_i\\) is the number density of carrier type \\(i\\), \\(q_i\\) its charge, and \\(\\mu_i\\) its mobility. Conductance consequently depends on both the availability of carriers and how easily they move.\n\nCarrier motion is affected by scattering from lattice vibrations, impurities, defects, and other carriers. In many metals near room temperature, increasing temperature increases scattering and reduces conductance. In semiconductors, temperature also changes carrier populations, so conductance can increase strongly with temperature. Electrolyte conductance depends on ion concentration, mobility, interactions, and the properties of the solvent.\n\nIn superconductivity, the direct-current resistance vanishes under appropriate conditions. Describing this merely as infinite conductance is incomplete: superconductors also exhibit distinctive magnetic behavior and have limits associated with temperature, current, and magnetic field."
    },
    {
      "heading": "Conductance in circuits",
      "text": "Conductance is particularly convenient for analyzing parallel connections. For independent resistive branches connected across the same two nodes,\n\n\\[G_{\\mathrm{eq}}=\\sum_i G_i.\\]\n\nEach branch experiences the same voltage, and the branch currents add.\n\nFor resistive elements in series, resistances add instead:\n\n\\[\\frac{1}{G_{\\mathrm{eq}}}=\\sum_i\\frac{1}{G_i}.\\]\n\nThese relations assume ideal interconnections and elements operating in the regime for which their stated conductances apply.\n\nFor a passive ohmic element, the electrical power converted into heat is\n\n\\[P=VI=GV^2=\\frac{I^2}{G}.\\]\n\nAt fixed voltage, increasing conductance increases dissipated power. At fixed current, increasing conductance decreases it. These different conditions are important when interpreting heating effects."
    },
    {
      "heading": "Nonlinear and differential conductance",
      "text": "Many devices do not have a straight-line current–voltage characteristic. For such devices, two quantities must be distinguished.\n\nStatic conductance is the ratio at a specified operating point:\n\n\\[G_{\\mathrm{static}}=\\frac{I}{V}.\\]\n\nDifferential conductance, also called small-signal conductance, is the local slope:\n\n\\[g=\\frac{dI}{dV}.\\]\n\nFor an ohmic resistor, these are equal and constant. For a nonlinear device, they generally differ. Differential conductance describes the response to a sufficiently small voltage change around an operating point and is widely used in electronic-device characterization.\n\nSome devices have regions of negative differential conductance, where increasing voltage decreases current. This does not necessarily mean that their static conductance is negative or that they deliver net power at that operating point. Negative differential behavior must be interpreted in the context of the device’s full current–voltage relation and surrounding circuit."
    },
    {
      "heading": "Alternating-current conductance",
      "text": "In alternating-current analysis, voltage and current may differ in phase. The more general quantity is electrical admittance \\(Y\\), the reciprocal of impedance \\(Z\\):\n\n\\[Y=\\frac{1}{Z}=G+\\mathrm{i}B.\\]\n\nHere \\(G\\) is conductance, the real part of admittance, and \\(B\\) is susceptance, its imaginary part. Susceptance represents the reactive response associated with energy storage.\n\nIf\n\n\\[Z=R+\\mathrm{i}X,\\]\n\nthen\n\n\\[G=\\frac{R}{R^2+X^2}.\\]\n\nConsequently, AC conductance is not generally the reciprocal of the real part of impedance. The relation \\(G=1/R\\) applies directly when the impedance is purely resistive.\n\nFor a linear element in sinusoidal steady state, average power is\n\n\\[P=V_{\\mathrm{rms}}^2G.\\]\n\nConductance may depend on frequency because of material relaxation, dielectric losses, electrode processes, and changes in current distribution."
    },
    {
      "heading": "Measurement and practical applications",
      "text": "Conductance can be determined from measured current and voltage or obtained from a resistance measurement. Accurate measurements require a defined operating voltage, temperature, frequency where relevant, and contact arrangement.\n\nFor low-resistance specimens, four-terminal measurements separate the current-carrying connections from the voltage-sensing connections, reducing errors from leads and contacts. For very small conductances, insulation leakage and instrument input currents can become important. Calibration and evaluation of measurement uncertainty are essential when comparing results.\n\nIn solution measurements, electrodes and the sample geometry determine the measured conductance. A calibrated cell constant \\(K\\) converts it into conductivity:\n\n\\[\\sigma=KG.\\]\n\nFor an ideal parallel-electrode cell, \\(K=L/A\\). Practical cell constants are often established using reference solutions. Alternating excitation is commonly used to reduce electrode polarization and unwanted electrochemical changes.\n\nApplications include:\n\n- Circuit analysis: representing parallel current paths, leakage, and resistive loading.\n- Materials characterization: studying charge transport and its dependence on temperature, composition, or processing.\n- Water and solution analysis: using conductivity derived from conductance to characterize ionic content. The result is not, by itself, a unique identification of dissolved substances.\n- Biophysics: characterizing ion channels and membranes, including through patch-clamp measurements. Ionic current is often expressed as \\(I=g(V-E_{\\mathrm{rev}})\\), where \\(E_{\\mathrm{rev}}\\) is the reversal potential. The electrical driving force is therefore not simply the membrane voltage relative to zero."
    },
    {
      "heading": "Quantum conductance",
      "text": "In sufficiently small conductors, a bulk conductivity and simple geometrical scaling may no longer adequately describe transport. Quantum mechanics relates conductance to the transmission of electronic modes through the device.\n\nFor a coherent two-terminal conductor in the linear-response, low-temperature limit, a common form of the Landauer expression is\n\n\\[G=\\frac{2e^2}{h}\\sum_n T_n,\\]\n\nwhere \\(e\\) is the elementary charge, \\(h\\) is the Planck constant, and \\(T_n\\) is the transmission probability of mode \\(n\\). The factor of two assumes spin degeneracy.\n\nThe quantity\n\n\\[G_0=\\frac{2e^2}{h}\\approx77.48\\,\\mu\\mathrm{S}\\]\n\nis the conductance quantum for a fully transmitting spin-degenerate channel. Conductance steps near multiples of this value occur in suitable quantum point contacts. Imperfect transmission, lifted spin degeneracy, interactions, and finite temperature can change the observed pattern. Even a ballistic channel without internal scattering has finite two-terminal conductance because the measurement includes its coupling to reservoirs."
    }
  ],
  "links": [
    "electric-current",
    "electrical-resistance",
    "international-system-of-units",
    "ohms-law",
    "electric-potential",
    "electrical-conductivity",
    "electric-field",
    "electron",
    "semiconductor",
    "electrolyte",
    "ion",
    "scattering",
    "temperature",
    "superconductivity",
    "joule-heating",
    "alternating-current",
    "electrical-admittance",
    "electrical-impedance",
    "calibration",
    "measurement-uncertainty",
    "ion-channel",
    "quantum-mechanics",
    "elementary-charge",
    "planck-constant"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}