{
  "id": "electric-flux",
  "title": "Electric Flux",
  "lang": "en",
  "source_lang": "en",
  "summary": "Electric flux measures the signed amount of electric field passing through a surface and relates enclosed electric charge to the surrounding field through Gauss’s law.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Electric field flux"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/electric-flux/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/electric-flux/",
      "json": "https://aiwiki.page/zh/electric-flux.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Electric flux is a scalar quantity that measures the component of an electric field passing normally through a specified surface, integrated over that surface. It depends on the field’s strength and direction, the surface’s area, and its orientation. For a closed surface, the net outward electric flux is proportional to the total electric charge enclosed, a relationship expressed by Gauss’s law. Despite its name, electric flux does not describe a physical flow of charge or matter."
    },
    {
      "heading": "Definition and geometric interpretation",
      "text": "For an oriented surface \\(S\\), electric flux is defined by the surface integral\n\n\\[\\Phi_E=\\int_S \\mathbf{E}\\cdot d\\mathbf{A} =\\int_S \\mathbf{E}\\cdot\\hat{\\mathbf{n}}\\,dA,\\]\n\nwhere \\(\\mathbf{E}\\) is the electric field, \\(dA\\) is an infinitesimal area element, and \\(\\hat{\\mathbf{n}}\\) is the chosen unit normal to the surface. The vector area element is \\(d\\mathbf{A}=\\hat{\\mathbf{n}}\\,dA\\).\n\nThe dot product selects only the component of the field perpendicular to the surface. A field tangent to a surface contributes no flux through it. Reversing the chosen normal reverses the sign of the flux without changing the physical field.\n\nFor a flat surface of area \\(A\\) in a uniform field,\n\n\\[\\Phi_E=EA\\cos\\theta,\\]\n\nwhere \\(\\theta\\) is the angle between the field and the surface normal, not between the field and the plane itself. Consequently:\n\n- Flux is \\(+EA\\) when the field points along the chosen normal.\n- Flux is zero when the field lies parallel to the surface.\n- Flux is \\(-EA\\) when the field points opposite the normal.\n\nFor a curved surface or a nonuniform field, the local contributions must generally be integrated rather than replaced by a single field value multiplied by the total area.\n\nElectric flux is often visualized using electric field lines. With a consistent convention for drawing their density, the signed number of lines crossing a surface represents its flux. Field lines are a visualization, however, not discrete physical objects, and their drawn number is arbitrary."
    },
    {
      "heading": "Units",
      "text": "In the International System of Units, electric flux has units\n\n\\[[\\Phi_E] =\\mathrm{N\\,m^2/C} =\\mathrm{V\\,m}.\\]\n\nThese follow from multiplying electric field, measured in newtons per coulomb or volts per metre, by area.\n\nElectric flux is distinct from electric potential, which is measured in volts, and from electric current, which measures the rate at which charge passes through a surface. A static electric field can have nonzero flux even when no charge is moving."
    },
    {
      "heading": "Open and closed surfaces",
      "text": "An open surface, such as a disk, has a boundary edge. Its normal must be specified to determine the sign of the flux. There is no general rule that determines flux through an open surface solely from the charge on one side of it.\n\nA closed surface, such as a sphere or the complete boundary of a box, encloses a volume. Its standard orientation is outward, and its flux is written\n\n\\[\\Phi_E=\\oint_S \\mathbf{E}\\cdot d\\mathbf{A}.\\]\n\nField pointing out of the enclosed volume contributes positive flux; field pointing inward contributes negative flux. The resulting quantity is the net outward flux. A zero net flux does not mean that the field vanishes on the surface: positive and negative contributions may cancel.\n\nThe surface used to calculate flux may be entirely imaginary. It need not coincide with a material boundary or a physical measuring instrument."
    },
    {
      "heading": "Gauss’s law",
      "text": "Gauss’s law states that the net electric flux through a closed surface is\n\n\\[\\oint_S \\mathbf{E}\\cdot d\\mathbf{A} =\\frac{Q_{\\mathrm{enc}}}{\\varepsilon_0},\\]\n\nwhere \\(Q_{\\mathrm{enc}}\\) is the algebraic total of all charge enclosed and \\(\\varepsilon_0\\) is the vacuum permittivity. The enclosed charge includes both free charge and charge bound in matter.\n\nSeveral consequences are important:\n\n- A positive enclosed net charge gives positive outward flux.\n- A negative enclosed net charge gives negative outward flux.\n- Equal amounts of positive and negative enclosed charge give zero net flux.\n- Charges outside the surface can alter the field at every point on it, but contribute zero net flux through the complete closed surface.\n\nThus, Gauss’s law determines a surface integral, not generally the electric field at each point. Finding the field from the flux alone requires additional information, usually symmetry.\n\nFor a continuous charge distribution with volume charge density \\(\\rho\\), the local form is\n\n\\[\\nabla\\cdot\\mathbf{E}=\\frac{\\rho}{\\varepsilon_0}.\\]\n\nThe divergence theorem connects this differential statement to the closed-surface integral. Positive charge acts as a source of electric field, while negative charge acts as a sink in this mathematical sense.\n\nGauss’s law is one of Maxwell’s equations. It applies to time-dependent fields as well as to electrostatics; it is not restricted to fields produced by stationary charges."
    },
    {
      "heading": "Representative examples",
      "text": "Point charge and a spherical surface\n\nFor a point charge \\(q\\) at the center of a sphere of radius \\(r\\), Coulomb’s law gives the radial field\n\n\\[\\mathbf{E} =\\frac{q}{4\\pi\\varepsilon_0r^2}\\hat{\\mathbf{r}}.\\]\n\nThe normal component is constant over the sphere, so\n\n\\[\\Phi_E =\\frac{q}{4\\pi\\varepsilon_0r^2}(4\\pi r^2) =\\frac{q}{\\varepsilon_0}.\\]\n\nThe flux is independent of the sphere’s radius: the decrease of the field with \\(r^2\\) exactly compensates for the increase in area.\n\nThe same total flux passes through any closed surface enclosing that charge, even if the surface is irregular or the charge is off-center. In those cases, however, the field generally varies in magnitude and orientation across the surface.\n\nUniform field through a box\n\nFor a rectangular box in a uniform field directed perpendicular to two opposite faces, the flux entering one face equals the flux leaving the other. The remaining four faces have zero flux because the field is tangent to them. The total is therefore zero, although the field is nonzero throughout the box.\n\nFlux through a patch from a point charge\n\nFor a point charge, the flux through an oriented surface patch can be expressed using its signed solid angle \\(\\Omega\\):\n\n\\[\\Phi_E=\\frac{q}{4\\pi\\varepsilon_0}\\Omega.\\]\n\nThe solid angle measures the patch’s angular extent as viewed from the charge, including the sign set by its orientation. A closed surface enclosing the charge has total oriented solid angle \\(4\\pi\\), recovering Gauss’s law."
    },
    {
      "heading": "Electric flux in matter",
      "text": "Terminology differs between treatments of electromagnetism. In many physics texts, electric flux means the flux of \\(\\mathbf{E}\\) defined above. In some engineering contexts, the term refers instead to the flux of the electric displacement field \\(\\mathbf{D}\\), also called electric flux density.\n\nIn the macroscopic description of matter,\n\n\\[\\mathbf{D}=\\varepsilon_0\\mathbf{E}+\\mathbf{P},\\]\n\nwhere \\(\\mathbf{P}\\) is the electric polarization, or electric dipole moment per unit volume. Gauss’s law then takes the form\n\n\\[\\oint_S\\mathbf{D}\\cdot d\\mathbf{A} =Q_{\\mathrm{free,enc}}.\\]\n\nThe distinction is essential:\n\nQuantity | Closed-surface relation | SI unit of flux\nFlux of \\(\\mathbf{E}\\) | \\(Q_{\\mathrm{total,enc}}/\\varepsilon_0\\) | \\(\\mathrm{N\\,m^2/C}\\)\nFlux of \\(\\mathbf{D}\\) | \\(Q_{\\mathrm{free,enc}}\\) | \\(\\mathrm{C}\\)\n\nFor a linear, isotropic dielectric, \\(\\mathbf{D}=\\varepsilon\\mathbf{E}\\). If the permittivity \\(\\varepsilon\\) is also uniform over the relevant surface, then\n\n\\[\\oint_S\\mathbf{E}\\cdot d\\mathbf{A} =\\frac{Q_{\\mathrm{free,enc}}}{\\varepsilon}.\\]\n\nThis simplified expression cannot generally be used when permittivity varies across the surface or when the material response is anisotropic or nonlinear. The definition involving total charge and \\(\\varepsilon_0\\) remains the fundamental Gauss’s-law relation for \\(\\mathbf{E}\\)."
    },
    {
      "heading": "Applications and limitations",
      "text": "Electric flux is especially useful for finding fields in highly symmetric systems. Spherical, cylindrical, or planar symmetry can make the normal component of the field constant over selected portions of a closed surface. The resulting integral then reduces to simple products. Applications include fields around charged spheres, idealized long charged cylinders, and idealized infinite charged planes.\n\nIn an electrical conductor at electrostatic equilibrium, the electric field vanishes within the conducting material. Combined with Gauss’s law and appropriate surface choices, this fact constrains charge distributions and helps establish the relation between surface charge and the field immediately outside a conductor. Flux methods also support calculations of capacitance.\n\nA time-varying electric flux appears in the vacuum form of the displacement current term:\n\n\\[I_{\\mathrm d} =\\varepsilon_0\\frac{d\\Phi_E}{dt},\\]\n\nfor a fixed integration surface. This term enters the Maxwell–Ampère equation and helps account for the magnetic field associated with a charging capacitor. In matter, the corresponding macroscopic expression uses the time derivative of the flux of \\(\\mathbf{D}\\).\n\nElectric flux is mathematically analogous to magnetic flux, but their closed-surface laws differ. Electric flux can be nonzero because electric charge exists, whereas the net magnetic flux through a closed surface is zero in classical Maxwell theory.\n\nFlux is an integrated quantity and therefore does not uniquely specify a local field. Many different field configurations have the same flux through a given surface. Likewise, zero enclosed net charge does not imply zero field, and zero net flux does not imply that no field crosses the surface."
    }
  ],
  "links": [
    "electric-field",
    "electric-charge",
    "international-system-of-units",
    "coulomb",
    "electric-potential",
    "electric-current",
    "gauss-law",
    "permittivity",
    "divergence-theorem",
    "maxwells-equations",
    "electrostatics",
    "coulombs-law",
    "electromagnetism",
    "dielectric",
    "electrical-conductor",
    "capacitance",
    "displacement-current",
    "magnetic-flux"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}