{
  "id": "dry-ice",
  "title": "Dry Ice",
  "lang": "en",
  "source_lang": "en",
  "summary": "Dry ice is solid carbon dioxide, used for refrigeration, industrial cleaning, and fog effects because it sublimates directly into gas at ordinary atmospheric pressure.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Solid carbon dioxide",
    "carbon dioxide snow"
  ],
  "generated_at": "2026-11-02",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/dry-ice/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/dry-ice/",
      "json": "https://aiwiki.page/zh/dry-ice.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Dry ice is the solid form of carbon dioxide (\\(\\mathrm{CO_2}\\)). At ordinary atmospheric pressure, it changes directly from a solid into a gas through sublimation, rather than melting into a liquid. Its name refers to this absence of liquid residue, which distinguishes it from ordinary water ice. Dry ice is widely used as a cooling material, an industrial cleaning medium, and a source of theatrical fog."
    },
    {
      "heading": "Physical properties and phase behavior",
      "text": "Dry ice is a white solid, commonly supplied as blocks, slices, pellets, or loosely packed “snow.” Pure carbon dioxide gas is colorless; the white appearance of dry ice results largely from the scattering of light within its crystalline and porous structure.\n\nAt a pressure of one standard atmosphere, dry ice sublimates at approximately \\(-78.5\\,^\\circ\\mathrm{C}\\), or \\(194.7\\,\\mathrm{K}\\). This is its atmospheric sublimation temperature, not a melting point. Its actual temperature can be lower under other conditions.\n\nThe distinction follows from carbon dioxide’s phase behavior. Its triple point, where solid, liquid, and gas can coexist in equilibrium, occurs at approximately \\(-56.6\\,^\\circ\\mathrm{C}\\) and \\(5.18\\) bar absolute pressure. Below that pressure, liquid carbon dioxide is not a stable equilibrium phase. Consequently, dry ice exposed to ordinary atmospheric pressure cannot simply melt. At suitable higher pressures, however, solid carbon dioxide can become liquid.\n\nCompact dry ice has a density of roughly \\(1.5\\)–\\(1.6\\,\\mathrm{g/cm^3}\\), depending on temperature and structure; loosely packed snow has a substantially lower bulk density. The latent heat of sublimation near atmospheric pressure is about \\(570\\,\\mathrm{kJ/kg}\\). Absorbing this energy from its surroundings gives dry ice much of its cooling capacity. The resulting cold gas can absorb additional heat as it warms.\n\nThe rate at which dry ice disappears is not fixed. It depends on insulation, airflow, exposed surface area, ambient conditions, and contact with warmer materials. Small pellets generally sublime more quickly than a compact block of the same mass because they expose more surface area."
    },
    {
      "heading": "Manufacture and commercial development",
      "text": "Dry ice is usually manufactured from liquid carbon dioxide. Industrial carbon dioxide may be recovered from processes such as fermentation, ammonia production, or natural-gas processing, then purified, compressed, and liquefied.\n\nWhen liquid carbon dioxide expands through a valve to a sufficiently low pressure, part of it vaporizes. The accompanying cooling causes another fraction to freeze into carbon dioxide snow. This snow can then be compressed into blocks or extruded into pellets. Gas released during production may be collected and recycled.\n\nSolid carbon dioxide was first reported in 1835 by the French experimenter Adrien-Jean-Pierre Thilorier, who produced it through the expansion of liquid carbon dioxide. Commercial production developed in the 1920s, particularly for transporting frozen foods. “Dry Ice” originated as a commercial name and subsequently became a widely used generic term.\n\nCommercial products differ in size, density, purity, and intended use. Material intended for contact with food is subject to different quality requirements from material intended solely for industrial cleaning."
    },
    {
      "heading": "Applications",
      "text": "Refrigeration and transport\n\nDry ice provides cooling without an electrical power supply at the point of use. It is used in refrigeration and insulated shipping systems for frozen foods, laboratory specimens, and other temperature-sensitive materials.\n\nIts low sublimation temperature can maintain conditions far colder than those provided by melting water ice. The absence of meltwater also reduces wetting of packaging, although atmospheric moisture can still condense or freeze on cold surfaces.\n\nA dry-ice package does not automatically hold its contents at exactly \\(-78.5\\,^\\circ\\mathrm{C}\\). Product temperatures depend on the arrangement of the load, insulation, thermal contact, airflow, and the amount of dry ice remaining. Materials sensitive to freezing can be damaged by direct contact.\n\nLaboratory cooling\n\nLaboratories use dry ice in cooling baths, cold traps, and procedures requiring temperatures below those readily achieved with water ice and salt. A mixture of dry ice and a suitable solvent, such as ethanol, provides effective thermal contact with laboratory vessels.\n\nSuch baths operate near the atmospheric sublimation temperature while sufficient dry ice remains, although their exact temperature depends on composition and operating conditions. They are substantially warmer than liquid nitrogen, so the two cooling materials are not interchangeable.\n\nFog and special effects\n\nPlacing dry ice in warm water accelerates sublimation and creates a dense, low-lying fog. The visible cloud is mainly tiny water droplets formed through condensation as moist air cools, not visible carbon dioxide gas.\n\nThe cloud tends to remain near the ground because the cold gas–air mixture is denser than the surrounding warmer air. As it warms and mixes, it disperses. The visible boundary of the fog does not reliably indicate the distribution or concentration of carbon dioxide.\n\nIndustrial cleaning\n\nIn dry-ice blasting, compressed gas accelerates dry-ice particles toward a surface. Their impact, rapid cooling, and sublimation help loosen contaminants. Applications include cleaning machinery, molds, and production equipment.\n\nUnlike mineral abrasives, the dry-ice medium itself disappears as gas. Removed contaminants nevertheless remain and may require collection or disposal. Cleaning effectiveness and the possibility of surface damage depend on the substrate, contaminant, particle size, and operating conditions."
    },
    {
      "heading": "Hazards and practical limitations",
      "text": "Dry ice presents hazards from extreme cold, gas release, and pressure buildup.\n\nDirect contact can cause freezing injuries to skin and other tissues. Its low temperature can also make some plastics, rubber components, and other materials brittle.\n\nSublimation produces a large volume of gas. One kilogram of dry ice yields roughly \\(540\\)–\\(550\\) liters of carbon dioxide at about room temperature and one atmosphere. In a sealed rigid container, this expansion can generate enough pressure to rupture the container.\n\nCarbon dioxide can accumulate in enclosed or poorly ventilated spaces. It can displace oxygen, but it also has direct physiological effects at elevated concentrations; its danger is therefore not limited to oxygen displacement. Pure carbon dioxide is odorless, and an unsafe atmosphere need not have an obvious sensory warning. Although cold carbon dioxide-rich mixtures can collect in low areas, airflow and mixing influence their distribution.\n\nDry ice is nonflammable and does not normally support combustion, but those properties do not make it harmless. Its use in drinks or food displays carries an additional risk if solid pieces remain available for accidental ingestion or contact.\n\nStorage and transport involve an unavoidable trade-off: insulation slows sublimation, while gas release requires pressure relief. Dry ice therefore cannot be preserved indefinitely in ordinary storage. Air transport is subject to dangerous-goods requirements because released carbon dioxide can affect enclosed cargo and occupied spaces."
    },
    {
      "heading": "Environmental context",
      "text": "Dry ice releases carbon dioxide into the atmosphere as it sublimes. Its overall environmental impact depends on the source of that carbon dioxide, the energy used for purification and production, transport distances, and losses before use.\n\nRecovering carbon dioxide from another industrial process can make use of an existing gas stream, but converting it into dry ice does not permanently remove it from the carbon cycle. Its use is not inherently carbon-neutral: carbon dioxide is a greenhouse gas, and refrigeration systems must be compared across their full operating and supply chains rather than only by whether they leave a liquid or solid residue."
    }
  ],
  "links": [
    "carbon-dioxide",
    "pressure",
    "water",
    "temperature",
    "phase-transition",
    "triple-point",
    "density",
    "latent-heat",
    "heat",
    "refrigeration",
    "solvent",
    "ethanol",
    "condensation",
    "oxygen",
    "combustion",
    "carbon-cycle",
    "greenhouse-gas"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}