{
  "id": "displacement-ship",
  "title": "Displacement (ship)",
  "lang": "en",
  "source_lang": "en",
  "summary": "Displacement is a ship’s total mass at a specified loading condition, equal to the mass of water it displaces while floating in equilibrium.",
  "category": "technology",
  "subcategory": "transport",
  "type": "concept",
  "aliases": [
    "Ship displacement",
    "displacement tonnage"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/displacement-ship/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/displacement-ship/",
      "json": "https://aiwiki.page/zh/displacement-ship.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A ship’s displacement is its total mass at a particular loading condition, equal to the mass of water displaced by its submerged hull when floating in equilibrium. It includes the vessel itself and everything aboard, such as machinery, cargo, fuel, ballast, stores, passengers, and crew. Displacement is normally expressed in tonnes or long tons. It is a fundamental quantity in naval architecture, but it is not the same as cargo-carrying capacity or the volume-based measures used to register merchant ships."
    },
    {
      "heading": "Physical principle",
      "text": "Displacement follows from Archimedes’ principle: an immersed body experiences an upward buoyant force equal to the weight of the fluid it displaces. For a freely floating ship at rest, this buoyant force balances the ship’s weight.\n\nIn water of approximately uniform density,\n\n\\[m=\\rho \\nabla,\\]\n\nwhere:\n\n- \\(m\\) is the ship’s displacement mass;\n- \\(\\rho\\) is the surrounding water’s density;\n- \\(\\nabla\\) is the immersed displacement volume.\n\nThe corresponding force balance is\n\n\\[W=mg=\\rho g\\nabla,\\]\n\nwhere \\(W\\) is the ship’s weight and \\(g\\) is gravitational acceleration. Although maritime usage often calls displacement a “weight,” a value stated in tonnes is a mass, not a force.\n\nDisplacement volume, measured in cubic metres, must therefore be distinguished from displacement mass. For example, a ship with an immersed volume of \\(10{,}000\\ \\mathrm{m^3}\\) in water of density \\(1{,}025\\ \\mathrm{kg/m^3}\\) has a displacement mass of \\(10{,}250\\) tonnes.\n\nEffect of water density\n\nA ship of unchanged mass must displace a larger volume in fresh water than in denser seawater. It consequently floats deeper in fresh water. Its displacement mass remains unchanged; its immersed volume and draft—the vertical distance from the waterline to the relevant bottom reference—change.\n\nNaval calculations commonly use reference densities of approximately \\(1{,}000\\ \\mathrm{kg/m^3}\\) for fresh water and \\(1{,}025\\ \\mathrm{kg/m^3}\\) for seawater. Actual density varies with salinity and temperature, so accurate measurements require the local value."
    },
    {
      "heading": "Loading conditions",
      "text": "Displacement is not a single permanent characteristic of a ship. Loading cargo, taking on ballast, or embarking passengers increases it; unloading cargo or consuming fuel reduces it. Published figures therefore need a stated loading condition.\n\nTerm | Meaning\nLightship displacement | The mass of the completed ship, including its structure, machinery, permanent equipment, and specified fixed contents, but excluding variable loads such as cargo, passengers, fuel, and ballast water. Exact inclusions follow the applicable definition.\nLoaded displacement | Displacement in a stated loaded condition, which need not be the maximum permitted condition.\nFull-load displacement | Displacement with the loads prescribed for a defined full-load condition. Naval and commercial definitions may differ.\nDesign displacement | The displacement associated with a selected design condition, commonly linked to a design waterline and draft.\nStandard displacement | A historically important naval reporting condition established through treaty definitions, rather than a universal synonym for normal operating displacement.\n\nLightship and full-load displacement\n\nLightship displacement provides the baseline from which variable loads are calculated. It can change during a vessel’s life when equipment is added or removed, machinery is replaced, or structural alterations are made.\n\nFull-load displacement includes the variable loads specified for that condition. A merchant ship’s permissible loading is constrained by factors including its assigned load line, structural strength, and stability requirements. A warship’s reported full-load figure generally includes operational loads such as fuel, ammunition, stores, and personnel, according to the reporting convention.\n\nA full-load figure should not be interpreted as the greatest mass at which a vessel could physically remain afloat. Safe and lawful operating limits are reached before all potential buoyant volume is immersed.\n\nStandard displacement\n\nThe Washington Naval Treaty of 1922 introduced a definition of standard displacement for comparing and limiting warships. It described a ship complete, fully manned, equipped, and ready for sea, including armament, ammunition, equipment, provisions, and fresh water for the crew, but excluding fuel and reserve boiler feedwater.\n\nThis convention allowed treaty limits to be expressed using a common loading basis. Standard displacement is consequently lower than full-load displacement for the same ship, and the two figures are not directly interchangeable. Comparisons of historical warships require attention to both the loading definition and the unit used."
    },
    {
      "heading": "Units and related measures",
      "text": "Modern displacement figures are commonly expressed in the metric tonne, equal to \\(1{,}000\\ \\mathrm{kg}\\), a unit accepted for use with the International System of Units. Historical naval records, particularly British and American ones, often use the long ton, equal to 2,240 pounds or approximately \\(1{,}016.047\\ \\mathrm{kg}\\).\n\nAn unqualified figure in “tons” can therefore be ambiguous. Unit differences are separate from differences between standard, lightship, and full-load conditions.\n\nDeadweight\n\nDeadweight tonnage measures the mass a ship can carry at a specified loaded condition, rather than the ship’s total mass:\n\n\\[\\mathrm{DWT}=\\Delta_{\\mathrm{loaded}}-\\Delta_{\\mathrm{lightship}},\\]\n\nwhere both displacement values are expressed in the same mass units.\n\nDeadweight includes not only cargo but also fuel, lubricating oil, fresh water, ballast, stores, passengers, crew, and other variable loads included under the applicable definition. Cargo capacity by mass is therefore generally less than total deadweight.\n\nGross and net tonnage\n\nGross tonnage and net tonnage are measures derived from enclosed ship volumes under prescribed rules. They are dimensionless indices, not masses, and must not be treated as displacement figures.\n\nDisplacement is especially common in descriptions of warships. Merchant vessels are often described by gross tonnage, deadweight, or cargo-specific capacity because these better serve particular commercial and regulatory purposes. A container ship’s capacity in twenty-foot equivalent units, for example, is not a measure of its mass or displacement."
    },
    {
      "heading": "Determination and measurement",
      "text": "Hydrostatic calculations\n\nShip designers calculate displacement volume from the geometry of the immersed hull. Integrating its submerged cross-sectional areas along its length gives\n\n\\[\\nabla=\\int_0^L A(x)\\,dx,\\]\n\nwhere \\(A(x)\\) is the immersed cross-sectional area at longitudinal position \\(x\\), and \\(L\\) spans the hull’s immersed length.\n\nHydrostatic tables or computer models relate displacement to draft and also provide quantities such as waterplane area and the position of the centre of buoyancy. Calculations must distinguish the geometric reference used—for example, a moulded hull surface—from the actual external displaced volume, with appropriate allowances for shell plating and appendages where required.\n\nDraft surveys\n\nA draft survey estimates displacement from observed drafts and the vessel’s hydrostatic information. Draft marks near the bow, stern, and amidships help establish the vessel’s immersion, trim, and hull deflection. Water density is measured, and corrections are applied as necessary.\n\nComparing displacement before and after loading can estimate the mass of cargo transferred. Changes in fuel, ballast, fresh water, stores, and other loads must also be accounted for.\n\nSources of measurement uncertainty include waves, difficulty reading draft marks, water-density variation, incomplete tank measurements, and inaccuracies in the hydrostatic data. A draft survey is thus an indirect measurement rather than the equivalent of weighing the ship on a scale.\n\nChanges in draft\n\nFor a small increase in mass, with approximately unchanged trim and waterplane area,\n\n\\[\\delta T\\approx\\frac{\\delta m}{\\rho A_{\\mathrm{wp}}},\\]\n\nwhere \\(\\delta T\\) is the increase in draft, \\(\\delta m\\) is the added mass, and \\(A_{\\mathrm{wp}}\\) is the waterplane area.\n\nA related practical quantity is tonnes per centimetre immersion: the additional mass required to increase mean draft by one centimetre at a specified condition. It varies with draft because the hull’s waterplane area generally changes as the ship sinks deeper."
    },
    {
      "heading": "Engineering and operational significance",
      "text": "Displacement connects a ship’s weight distribution to its immersed geometry. It is used in calculations of draft, freeboard, stability, structural loading, resistance, and propulsion performance.\n\nIn ship stability, total displacement alone is insufficient. The positions of the centre of gravity and centre of buoyancy, the shape of the waterplane, and the arrangement of loads also matter. Two ships with equal displacement can have very different stability characteristics. Moving a load within a ship may leave displacement unchanged while altering trim, heel, or stability.\n\nDisplacement also affects the bending loads acting on the hull. The distribution of weight along the vessel does not generally match the distribution of buoyancy, producing shear forces and bending moments even when the total vertical forces balance.\n\nFor navigation and port operations, displacement-related draft affects access to shallow channels, berths, and facilities at a seaport. The permissible loaded condition must also account for freeboard and load-line requirements; draft cannot be considered independently of these limits."
    },
    {
      "heading": "Displacement hulls and special cases",
      "text": "A displacement hull is a hull intended to operate primarily with its weight supported by hydrostatic buoyancy. The term distinguishes an operating mode from planing, in which hydrodynamic lift supports a substantial part of the vessel’s weight at speed. A planing craft still has a displacement mass, and when stationary it floats according to the same buoyancy principle.\n\nFor a submarine floating on the surface, buoyancy supports its mass in the same general way as for a surface ship. During diving, admitting water to main ballast tanks changes the submarine’s ballast condition. Submerged displacement is normally greater than surfaced displacement, although the numerical relationship depends on the reporting convention.\n\nIn waves, during acceleration, or while planing, instantaneous forces need not satisfy the simple static relation \\(mg=\\rho g\\nabla\\). Hydrodynamic forces and vertical acceleration may also be significant. The usual definition linking ship mass to displaced-water mass therefore refers to a specified hydrostatic equilibrium condition."
    }
  ],
  "links": [
    "mass",
    "archimedes-principle",
    "buoyancy",
    "density",
    "international-system-of-units",
    "measurement-uncertainty",
    "seaport"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}