{
  "id": "dilution",
  "title": "Dilution",
  "lang": "en",
  "source_lang": "en",
  "summary": "Dilution is the reduction of a substance’s concentration by adding solvent or another medium, usually without removing the substance itself.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/dilution/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/dilution/",
      "json": "https://aiwiki.page/zh/dilution.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Dilution is the process of decreasing the concentration of a substance in a mixture, usually by adding a solvent or another medium containing less of that substance. In chemistry, it most commonly refers to adding solvent to a solution while retaining the original amount of dissolved material. The term also applies to suspensions, gas mixtures, and environmental contaminants. Dilution changes the amount of a substance relative to its surroundings; it does not, by itself, destroy or remove that substance."
    },
    {
      "heading": "Quantitative basis",
      "text": "The simplest dilution calculation follows from conservation of mass. If a dissolved substance is neither added nor lost, its amount before and after dilution is the same.\n\nFor molar concentration, defined as amount of substance per unit volume of solution,\n\n\\[c=\\frac{n}{V},\\]\n\nwhere \\(c\\) is concentration, \\(n\\) is the amount of solute, and \\(V\\) is solution volume. Conservation of solute gives\n\n\\[c_1V_1=c_2V_2.\\]\n\nHere, \\(V_1\\) is the volume of the original solution being diluted, and \\(V_2\\) is the final total volume—not the volume of solvent added. The equation also applies to mass concentration if the same concentration basis and compatible units are used throughout.\n\nFor example, diluting \\(10.0\\ \\mathrm{mL}\\) of a \\(0.200\\ \\mathrm{mol\\,L^{-1}}\\) solution to a final volume of \\(100.0\\ \\mathrm{mL}\\) gives\n\n\\[c_2= \\frac{(0.200\\ \\mathrm{mol\\,L^{-1}})(10.0\\ \\mathrm{mL})} {100.0\\ \\mathrm{mL}} =0.0200\\ \\mathrm{mol\\,L^{-1}}.\\]\n\nThe dilution factor is commonly defined as\n\n\\[D=\\frac{V_2}{V_1}=\\frac{c_1}{c_2}.\\]\n\nThus, a tenfold dilution has \\(D=10\\) and a final concentration one-tenth of the starting concentration. Expressions such as “1:10 dilution” can be ambiguous: they may describe one part sample in ten parts total or, in some contexts, one part sample plus ten parts diluent. Explicitly stating sample and final volumes avoids this ambiguity.\n\nAssumptions and extensions\n\nThe simple equation assumes that:\n\n- the added medium contains none of the substance being measured;\n- no solute is lost through transfer, precipitation, adsorption, or other processes;\n- the measured substance is not created or consumed by a chemical reaction;\n- the final mixture is sufficiently uniform for its concentration to be represented by a single value.\n\nIf the added medium already contains the substance, the appropriate balance is\n\n\\[c_fV_f=c_1V_1+c_dV_d,\\]\n\nwhere \\(c_d\\) and \\(V_d\\) describe the added medium. This expression uses the actual final volume \\(V_f\\), which need not equal \\(V_1+V_d\\).\n\nLiquid volumes are not always additive because mixing changes intermolecular arrangements. For instance, mixing ethanol and water can produce a volume smaller than the sum of their separate volumes. Precise volumetric dilution therefore relies on a measured final volume rather than an assumed sum."
    },
    {
      "heading": "Single-step and serial dilution",
      "text": "A single-step dilution transfers a measured portion, or aliquot, of a starting solution into a larger final volume. Laboratory work commonly uses pipettes and volumetric flasks for this purpose.\n\nSerial dilution consists of successive dilution steps, each using material from the preceding mixture. If step \\(i\\) has dilution factor \\(D_i\\), the total factor is\n\n\\[D_{\\mathrm{total}}=\\prod_{i=1}^{k}D_i.\\]\n\nFor \\(k\\) identical steps with factor \\(D\\),\n\n\\[c_k=\\frac{c_0}{D^k}.\\]\n\nSix consecutive tenfold dilutions therefore reduce the concentration to \\(10^{-6}\\) of its initial value.\n\nSerial dilution is widely used in microbiology to bring microbial populations into a range suitable for counting. It also produces concentration series for chemical assays and instrument calibration. When diluted suspensions are cultured, results are often reported as colony-forming units rather than exact numbers of individual cells, because a colony may originate from a cell cluster.\n\nEach serial transfer introduces additional measurement uncertainty. Inadequate mixing, transfer-volume errors, contamination, or material adhering to vessel surfaces can accumulate across the series."
    },
    {
      "heading": "Physical and chemical effects",
      "text": "Mixing and transport\n\nDilution and mixing are related but distinct. Adding solvent changes the overall composition, whereas mixing distributes the components. Diffusion reduces concentration gradients through molecular motion; stirring, flow, and turbulence often accelerate homogenization. Before mixing is complete, local concentrations may differ substantially from the concentration calculated for the entire vessel.\n\nThermodynamics and non-ideal behavior\n\nMixing generally increases configurational entropy, but the energetic consequences depend on interactions among the components. Dilution can release or absorb heat, and its temperature effects can be substantial for some concentrated solutions.\n\nChemical behavior depends on thermodynamic activity, not concentration alone. As a solution becomes more dilute, interactions between dissolved particles change, and the relationship between concentration and activity may change as well. Consequently, a tenfold reduction in concentration does not necessarily produce a tenfold reduction in every measurable response.\n\nThe term infinite dilution denotes a limiting condition in which the concentration of a dissolved component approaches zero. It is a theoretical reference state, not necessarily a literal preparation containing no solute. Infinite-dilution limits are useful for describing solute–solvent interactions and properties such as ionic mobility.\n\nEquilibria, acidity, and reaction rates\n\nDilution can shift chemical equilibria. The total amount of an element may remain constant while its distribution among molecules and ions changes. A weak acid, for example, generally becomes more extensively dissociated as it is diluted, even though the total acid concentration falls.\n\nThe effect on pH depends on acid or base strength, buffering, activity effects, and the contribution of water’s own ionization. A tenfold dilution of a sufficiently concentrated, fully dissociated monoprotic acid approximately raises pH by one unit. This approximation fails as the solution approaches neutrality and does not generally apply to weak acids or buffered mixtures.\n\nDilution also affects reaction rates. For a reaction following\n\n\\[r=k[A]^m[B]^n,\\]\n\nreducing both reactant concentrations by a factor \\(D\\), while leaving the rate constant and other conditions unchanged, reduces the rate per unit volume by \\(D^{m+n}\\). Real systems may depart from this result if dilution changes temperature, solvent properties, speciation, or the reaction mechanism."
    },
    {
      "heading": "Applications",
      "text": "In analytical chemistry, dilution brings samples within an instrument’s working range, produces calibration standards, and can reduce interference from other sample components. The original concentration is recovered by multiplying the measured diluted concentration by the applicable dilution factor, provided no analyte has been lost or transformed.\n\nIn spectroscopy, dilution can bring an optical signal into a usable range and reduce effects associated with highly concentrated samples. However, changing concentration may also alter aggregation or chemical equilibria, so the diluted sample may not preserve every property of the original.\n\nIn biological laboratory work, dilution adjusts concentrations of proteins, nucleic acids, cells, and reagents. The diluent is often a buffered or otherwise controlled medium rather than pure water, because ionic composition and acidity can affect stability and function.\n\nEnvironmental dilution occurs when contaminants mix with cleaner air or water. In a river, for example, increasing water flow can lower a contaminant’s concentration without lowering the mass entering the river per unit time. In a simplified, completely mixed system,\n\n\\[C=\\frac{\\dot m}{Q},\\]\n\nwhere \\(C\\) is concentration, \\(\\dot m\\) is contaminant mass flow rate, and \\(Q\\) is volumetric flow rate. Actual concentrations also depend on transport, incomplete mixing, chemical transformations, and exchange with sediments or other surroundings."
    },
    {
      "heading": "Limits of dilution",
      "text": "Dilution is not equivalent to purification or decontamination. A lower concentration can coexist with an unchanged total quantity of contaminant, and the larger resulting volume may still require treatment.\n\nAt extremely low concentrations, the continuous concentration model also has practical limits. If a well-mixed sample contains an expected number \\(\\lambda\\) of independently distributed particles in a selected aliquot, a Poisson distribution gives the probability that the aliquot contains none:\n\n\\[P(N=0)=e^{-\\lambda}.\\]\n\nWhen \\(\\lambda\\) is small, nominally identical aliquots can therefore differ markedly in whether they contain any particles at all. Adsorption, background contamination, and instrumental detection limits can become more important than the concentration predicted by the dilution calculation."
    }
  ],
  "links": [
    "solvent",
    "chemistry",
    "solution",
    "conservation-of-mass",
    "molar-concentration",
    "amount-of-substance",
    "adsorption",
    "chemical-reaction",
    "ethanol",
    "water",
    "microbiology",
    "calibration",
    "measurement-uncertainty",
    "diffusion",
    "turbulence",
    "entropy",
    "heat",
    "thermodynamic-activity",
    "chemical-equilibrium",
    "ph",
    "chemical-kinetics",
    "analytical-chemistry",
    "spectroscopy",
    "protein",
    "river",
    "poisson-distribution"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}