{
  "id": "diesel-cycle",
  "title": "Diesel Cycle",
  "lang": "en",
  "source_lang": "en",
  "summary": "The Diesel cycle is an ideal thermodynamic cycle for compression-ignition engines, characterized by constant-pressure heat addition, isentropic compression and expansion, and constant-volume heat rejection.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Ideal Diesel cycle",
    "Constant-pressure heat-addition cycle"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/diesel-cycle/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/diesel-cycle/",
      "json": "https://aiwiki.page/zh/diesel-cycle.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The Diesel cycle is an idealized thermodynamic cycle used to analyze diesel engines and other compression-ignition engines. It consists of four processes: isentropic compression, constant-pressure heat addition, isentropic expansion, and constant-volume heat rejection. Its defining feature is that heat enters while the working gas expands at constant pressure. The cycle provides a simplified relationship between compression ratio, heat input, and efficiency; it is not an exact description of combustion or gas exchange in a real engine."
    },
    {
      "heading": "Historical background",
      "text": "The cycle is named after Rudolf Diesel, whose work in the 1890s led to the practical compression-ignition engine. A successful engine demonstrated at Augsburg in 1897 was an important milestone in its development.\n\nDiesel’s early theoretical proposals and the operation of practical diesel engines were not identical to the four-process model now taught as the ideal Diesel cycle. The modern cycle is principally an analytical model: it isolates the consequences of compression and constant-pressure heat addition without representing every mechanical or chemical detail of an engine."
    },
    {
      "heading": "Air-standard assumptions",
      "text": "The usual analysis adopts air-standard assumptions:\n\n- A fixed mass of air circulates through a closed cycle and behaves as an ideal gas.\n- All processes are internally reversible.\n- External heat addition replaces combustion.\n- Heat rejection returns the air to its initial state, replacing the exhaust and intake processes of a real engine.\n\nThe additional cold-air-standard assumption treats the specific heat capacities as constant, usually at values representative of approximately room temperature. This permits a simple analytical efficiency formula. Air-standard calculations can instead use temperature-dependent heat capacities, but the resulting analysis generally requires property tables or numerical methods.\n\nFor the constant-property model,\n\n\\[pv=RT, \\qquad \\gamma=\\frac{c_p}{c_v},\\]\n\nwhere \\(p\\) is pressure, \\(v\\) is specific volume, \\(T\\) is absolute temperature, \\(R\\) is the specific gas constant, and \\(c_p\\) and \\(c_v\\) are the specific heat capacities at constant pressure and constant volume.\n\nAn isentropic process has constant specific entropy. In this model, the compression and expansion are both reversible and adiabatic: no heat crosses the system boundary during either process."
    },
    {
      "heading": "The four processes",
      "text": "Number the states consecutively from the beginning of compression. State 1 has the maximum cylinder volume, and state 2 has the minimum volume.\n\n1–2: Isentropic compression\n\nThe piston compresses the working gas from \\(v_1\\) to \\(v_2\\). Work is supplied to the gas, increasing its temperature and pressure without heat transfer.\n\nDefine the compression ratio as\n\n\\[r=\\frac{v_1}{v_2}.\\]\n\nFor constant heat capacities,\n\n\\[\\frac{T_2}{T_1}=r^{\\gamma-1}, \\qquad \\frac{p_2}{p_1}=r^\\gamma.\\]\n\nIn a real compression-ignition engine, compression raises the air temperature sufficiently for injected fuel to ignite under suitable operating conditions.\n\n2–3: Constant-pressure heat addition\n\nHeat enters while the gas expands at constant pressure:\n\n\\[p_2=p_3.\\]\n\nDefine the cutoff ratio as\n\n\\[\\rho=\\frac{v_3}{v_2}.\\]\n\nBecause pressure remains constant for an ideal gas,\n\n\\[\\frac{T_3}{T_2}=\\rho.\\]\n\nThe heat supplied per unit mass is\n\n\\[q_{\\mathrm{in}}=c_p(T_3-T_2).\\]\n\nThe term cutoff refers to the end of idealized heat addition. Its mechanical analogue is the end of fuel delivery or significant heat release, although real injection and combustion do not follow an exactly constant-pressure path.\n\n3–4: Isentropic expansion\n\nAfter heat addition ends, the gas expands without heat transfer until it returns to the maximum volume:\n\n\\[v_4=v_1.\\]\n\nThe gas performs work on the piston as its pressure and temperature fall. The expansion ratio is\n\n\\[\\frac{v_4}{v_3}=\\frac{r}{\\rho},\\]\n\nand therefore\n\n\\[\\frac{T_4}{T_3} = \\left(\\frac{\\rho}{r}\\right)^{\\gamma-1}.\\]\n\nFor a cycle with a nonzero expansion interval after heat addition,\n\n\\[1<\\rho<r.\\]\n\n4–1: Constant-volume heat rejection\n\nHeat leaves the gas at constant volume:\n\n\\[v_4=v_1.\\]\n\nPressure and temperature decrease until the initial state is restored. The positive magnitude of the rejected heat per unit mass is\n\n\\[q_{\\mathrm{out}}=c_v(T_4-T_1).\\]\n\nNo piston boundary work occurs during this step because the volume does not change. In a real engine, exhaust discharge and replacement by fresh air serve the broader purpose represented by this idealized heat-rejection process."
    },
    {
      "heading": "Work and thermal efficiency",
      "text": "The first law of thermodynamics gives the net work per unit mass over a complete cycle:\n\n\\[w_{\\mathrm{net}}=q_{\\mathrm{in}}-q_{\\mathrm{out}}.\\]\n\nThe working gas returns to its initial state, so its net change in internal energy is zero. Thermal efficiency is consequently\n\n\\[\\eta = \\frac{w_{\\mathrm{net}}}{q_{\\mathrm{in}}} = 1-\\frac{q_{\\mathrm{out}}}{q_{\\mathrm{in}}}.\\]\n\nFor the cold-air-standard Diesel cycle, substitution of the temperature relationships yields\n\n\\[\\boxed{ \\eta_{\\mathrm{Diesel}} = 1- \\frac{1}{r^{\\gamma-1}} \\frac{\\rho^\\gamma-1}{\\gamma(\\rho-1)} }.\\]\n\nThis expression shows that:\n\n- Increasing the compression ratio raises efficiency when the cutoff ratio and \\(\\gamma\\) remain fixed.\n- Increasing the cutoff ratio lowers efficiency when the compression ratio and \\(\\gamma\\) remain fixed.\n- Efficiency depends on the heat-capacity ratio as well as the cycle geometry.\n\nA larger cutoff ratio also means greater heat input when the state at the end of compression is fixed. Thus, lower efficiency does not necessarily mean lower work output per cycle.\n\nFor example, with \\(r=18\\), \\(\\rho=2\\), and \\(\\gamma=1.4\\), the formula gives an ideal efficiency of approximately \\(0.63\\), or \\(63\\%\\). This is a result for the simplified model, not a prediction of an actual engine’s shaft efficiency.\n\nOn a pressure–volume diagram, the area enclosed by the cycle represents net work:\n\n\\[w_{\\mathrm{net}}=\\oint p\\,dv.\\]\n\nOn a temperature–entropy diagram, the isentropic processes appear as vertical lines. For the internally reversible model, heat transfer is represented by the area under a process curve, since \\(\\delta q_{\\mathrm{rev}}=T\\,ds\\)."
    },
    {
      "heading": "Comparison with other ideal cycles",
      "text": "Otto cycle\n\nThe Otto cycle, commonly used as an ideal model of spark-ignition engines, adds heat at constant volume rather than constant pressure. With constant heat capacities, its efficiency is\n\n\\[\\eta_{\\mathrm{Otto}}=1-\\frac{1}{r^{\\gamma-1}}.\\]\n\nAt the same compression ratio and with the same \\(\\gamma\\), the Otto cycle is more efficient than a Diesel cycle with \\(\\rho>1\\), because\n\n\\[\\frac{\\rho^\\gamma-1}{\\gamma(\\rho-1)}>1.\\]\n\nThis comparison does not establish that real spark-ignition engines are more efficient than real diesel engines. Practical engines operate with different compression ratios, loads, heat-release histories, and mechanical losses. Diesel engines can employ higher compression ratios and often have lower throttling losses, particularly at part load.\n\nAs \\(\\rho\\) approaches 1, the Diesel efficiency formula approaches the Otto expression. This is a limiting mathematical result: if the end-of-compression state is fixed, the heat added also approaches zero.\n\nDual cycle\n\nThe dual cycle divides heat addition into a constant-volume portion followed by a constant-pressure portion. This can better approximate engines in which early combustion causes a rapid pressure rise and later combustion continues while the piston moves downward.\n\nNeither the Diesel nor the dual cycle reproduces the complete heat-release history of a practical engine. They provide different levels of simplification for analyzing its thermodynamic behavior.\n\nCarnot cycle\n\nThe Carnot cycle establishes the maximum efficiency for a heat engine exchanging heat only with two reservoirs at fixed temperatures. The Diesel cycle adds and rejects heat over ranges of working-fluid temperature, so its efficiency is not generally equal to \\(1-T_{\\min}/T_{\\max}\\). Its internally reversible idealization should not be confused with a completely reversible engine operating between two fixed-temperature reservoirs."
    },
    {
      "heading": "Applications and limitations",
      "text": "The Diesel cycle is used in engineering education, preliminary engine analysis, and studies of how compression ratio and heat-addition duration affect performance. It supplies a reference model for engines used in transport, marine propulsion, and stationary power generation.\n\nImportant differences between the model and actual engines include:\n\n- Finite-rate combustion. Fuel injection, evaporation, mixing, ignition delay, and chemical reactions produce a changing pressure rather than an exactly constant pressure.\n- Variable gas properties. Heat capacities change with temperature, and combustion products differ in composition from air.\n- Heat loss. Heat passes through cylinder walls during compression, combustion, and expansion.\n- Irreversibility. Mixing, viscous effects, combustion, and pressure differences generate entropy.\n- Gas exchange. Intake and exhaust involve mass flow and pumping work rather than a closed constant-volume cooling process.\n- Mechanical losses. Friction and auxiliary equipment reduce the work delivered at the output shaft.\n\nThe model also omits exhaust chemistry, pollutant formation, and the details of turbocharging. Predicting actual performance therefore requires more detailed thermodynamic, combustion, fluid-flow, and mechanical models. Ideal cycle efficiency, indicated efficiency based on cylinder work, and brake efficiency based on shaft output are distinct quantities and should not be treated as interchangeable."
    }
  ],
  "links": [
    "thermodynamics",
    "diesel-engine",
    "ideal-gas",
    "combustion",
    "heat-capacity",
    "pressure",
    "temperature",
    "gas-constant",
    "entropy",
    "adiabatic-process",
    "work-physics",
    "first-law-of-thermodynamics",
    "internal-energy",
    "otto-cycle",
    "carnot-cycle",
    "friction"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}