{
  "id": "daltons-law",
  "title": "Dalton’s Law",
  "lang": "en",
  "source_lang": "en",
  "summary": "Dalton’s law states that the total pressure of an ideal gas mixture equals the sum of the partial pressures of its constituent gases.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Dalton’s law of partial pressures",
    "Law of partial pressures"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/daltons-law/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/daltons-law/",
      "json": "https://aiwiki.page/zh/daltons-law.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Dalton’s law states that the total pressure exerted by a mixture of nonreacting ideal gases equals the sum of the pressures that each constituent gas would exert alone at the mixture’s temperature and volume. Named after John Dalton, who formulated it in the early nineteenth century, the law is exact for an ideal gas mixture and often provides a useful approximation for real gases at sufficiently low density."
    },
    {
      "heading": "Mathematical statement",
      "text": "For a mixture containing \\(k\\) gaseous components,\n\n\\[P=\\sum_{i=1}^{k}p_i,\\]\n\nwhere \\(P\\) is the total absolute pressure and \\(p_i\\) is the partial pressure of component \\(i\\).\n\nIn the ideal-gas interpretation, each partial pressure is\n\n\\[p_i=\\frac{n_iRT}{V},\\]\n\nwhere \\(n_i\\) is the amount of substance of that component, \\(R\\) is the gas constant, \\(T\\) is absolute temperature, and \\(V\\) is the volume occupied by the entire mixture. Each gas occupies the full accessible volume; the components are not assigned separate physical portions of the container.\n\nBecause the total amount is \\(n=\\sum_i n_i\\),\n\n\\[P=\\frac{nRT}{V}.\\]\n\nDefining the mole fraction of component \\(i\\) as \\(y_i=n_i/n\\) gives the frequently used form\n\n\\[p_i=y_iP, \\qquad \\sum_i y_i=1.\\]\n\nThus, in an ideal mixture, a gas’s fraction of the total pressure equals its fraction of the total number of molecules. It does not generally equal its fraction of the mixture’s mass, because different gases have different molar masses.\n\nAll pressures must use a consistent unit and an absolute, rather than gauge, reference. Absolute temperature is expressed in kelvins."
    },
    {
      "heading": "Molecular explanation",
      "text": "Gas pressure results from the transfer of momentum as molecules strike a container’s walls. In the ideal-gas model, molecules have negligible volume and exert no intermolecular forces except during elastic collisions. The momentum transferred by the different molecular species therefore contributes additively to the total pressure.\n\nFor a classical ideal gas at thermal equilibrium, kinetic theory gives\n\n\\[p_i=\\frac{1}{3}\\frac{N_i}{V}m_i\\langle v_i^2\\rangle,\\]\n\nwhere \\(N_i\\) is the number of molecules of species \\(i\\), \\(m_i\\) is the mass of one molecule, and \\(\\langle v_i^2\\rangle\\) is its mean squared speed. The equipartition theorem gives\n\n\\[\\frac{1}{2}m_i\\langle v_i^2\\rangle =\\frac{3}{2}k_{\\mathrm B}T,\\]\n\nso\n\n\\[p_i=\\frac{N_i k_{\\mathrm B}T}{V},\\]\n\nwith \\(k_{\\mathrm B}\\) the Boltzmann constant.\n\nConsequently, equal numbers of different ideal-gas molecules at the same temperature and volume exert equal pressures, regardless of their molecular masses. Lighter molecules move faster on average, compensating for their smaller momentum at a given speed."
    },
    {
      "heading": "Applications",
      "text": "Gas composition and atmospheric pressure\n\nDalton’s law converts gas composition into component pressures. For example, an ideal mixture containing \\(2.0\\) mol of nitrogen and \\(1.0\\) mol of oxygen at a total pressure of \\(150\\ \\mathrm{kPa}\\) has\n\n\\[p_{\\mathrm{N_2}}=\\frac{2}{3}(150)=100\\ \\mathrm{kPa},\\]\n\n\\[p_{\\mathrm{O_2}}=\\frac{1}{3}(150)=50\\ \\mathrm{kPa}.\\]\n\nThe same calculation is widely used for the Earth’s atmosphere. Dry air contains approximately \\(20.95\\%\\) oxygen by mole fraction, so at \\(101.325\\ \\mathrm{kPa}\\), its oxygen partial pressure is about \\(21.2\\ \\mathrm{kPa}\\). Humidity changes the wet-air mole fractions: water vapor contributes its own partial pressure and reduces the fraction attributable to each dry-air component at a fixed total pressure.\n\nGas collected over water\n\nA gas collected above liquid water usually contains water vapor. If the gas phase is saturated with water vapor and behaves approximately ideally,\n\n\\[P_{\\text{total}} =P_{\\text{dry gas}}+p_{\\mathrm{H_2O}},\\]\n\nand therefore\n\n\\[P_{\\text{dry gas}} =P_{\\text{total}}-p_{\\mathrm{H_2O}}.\\]\n\nThe water-vapor pressure must correspond to the actual temperature. For example, saturated water vapor at \\(25\\,^\\circ\\mathrm{C}\\) has a pressure of approximately \\(3.17\\ \\mathrm{kPa}\\). A saturated gas sample at that temperature and a total pressure of \\(100.0\\ \\mathrm{kPa}\\) therefore has a dry-gas pressure of approximately \\(96.8\\ \\mathrm{kPa}\\).\n\nThis correction is used in laboratory stoichiometric calculations. If the liquid levels inside and outside a collection vessel differ, the resulting hydrostatic pressure difference must also be accounted for. Unsaturated gas requires its actual water-vapor pressure rather than the saturation value.\n\nGas-phase equilibrium\n\nPartial pressures are important in chemical equilibrium. For an ideal-gas component, the chemical potential is\n\n\\[\\mu_i(T,p_i) =\\mu_i^\\circ(T) +RT\\ln\\left(\\frac{p_i}{p^\\circ}\\right),\\]\n\nwhere \\(p^\\circ\\) is the standard pressure and \\(\\mu_i^\\circ\\) is the corresponding standard chemical potential. Dalton’s law supplies the connection between mixture composition, total pressure, and the partial pressures used in equilibrium calculations."
    },
    {
      "heading": "Conditions and limitations",
      "text": "The ideal-gas assumptions become less accurate when molecular size and intermolecular interactions matter. Deviations are commonly important at high pressures, low temperatures, and near condensation or a critical point. Their magnitude depends on the substances and composition, not on pressure alone.\n\nFor real mixtures, partial pressure is commonly defined as \\(p_i=y_iP\\). With that definition, \\(\\sum_i p_i=P\\) follows automatically because the mole fractions sum to one. The substantive ideal-gas prediction is that this quantity also equals the pressure the isolated component would exert at the same temperature and total volume. That identification generally fails for real gases.\n\nReal-mixture calculations therefore use an appropriate equation of state. In thermodynamic equilibrium calculations, fugacity replaces partial pressure as the effective pressure-like quantity:\n\n\\[f_i=\\phi_i y_iP,\\]\n\nwhere \\(\\phi_i\\) is the component fugacity coefficient. In the ideal-gas limit, \\(\\phi_i\\to1\\), so \\(f_i\\to p_i\\). Fugacities do not generally sum to the total pressure.\n\nA chemical reaction can change the amounts and identities of the gases present. Dalton’s law may still describe the resulting gas mixture if it behaves ideally, but the partial pressures must be calculated from the composition after reaction, not simply from the initial amounts.\n\nDalton’s law also does not determine how much gas dissolves in a liquid. Under suitable dilute-solution conditions, that relationship is described by Henry’s law, which connects a gas’s equilibrium partial pressure with its dissolved concentration."
    }
  ],
  "links": [
    "pressure",
    "temperature",
    "john-dalton",
    "ideal-gas",
    "partial-pressure",
    "amount-of-substance",
    "gas-constant",
    "mole-fraction",
    "molar-mass",
    "kelvin",
    "momentum",
    "equipartition-theorem",
    "boltzmann-constant",
    "nitrogen",
    "oxygen",
    "atmosphere-of-earth",
    "water",
    "stoichiometry",
    "chemical-equilibrium",
    "chemical-potential",
    "condensation",
    "critical-point",
    "equation-of-state",
    "fugacity",
    "chemical-reaction",
    "henrys-law"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}