{
  "id": "cuprate-superconductor",
  "title": "Cuprate Superconductor",
  "lang": "en",
  "source_lang": "en",
  "summary": "A layered copper-oxide material in which charge carriers can form a superconducting state, often at unusually high temperatures.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Copper-oxide superconductor",
    "superconducting cuprate"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/cuprate-superconductor/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/cuprate-superconductor/",
      "json": "https://aiwiki.page/zh/cuprate-superconductor.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A cuprate superconductor is a member of a family of copper-containing oxides whose defining structural feature is a sheet of copper and oxygen atoms, usually called a copper–oxygen plane or \\(\\mathrm{CuO_2}\\) plane. Under suitable conditions of composition, temperature, and sometimes pressure, these materials exhibit superconductivity: electrical current flows without measurable direct-current resistance, and magnetic flux is expelled or confined to quantized vortices. Their superconducting transition temperatures, denoted \\(T_c\\), can greatly exceed those of conventional metallic superconductors. Several important cuprates remain superconducting above the approximately 77 K boiling point of liquid nitrogen at atmospheric pressure.\n\nThe discovery of cuprate superconductivity in 1986 transformed condensed-matter physics. Many parent compounds are magnetic insulators rather than ordinary metals, and superconductivity develops when their electronic charge density is changed. Their behavior therefore connects superconductivity with strong electronic interactions, magnetism, and competing forms of electronic order. Although the symmetry of the superconducting state and many features of the electronic structure are well established, a complete, broadly accepted microscopic explanation of their high transition temperatures remains unavailable.\n\nCuprates are also technologically important. Their ability to carry large currents in strong magnetic fields supports high-field magnets, power equipment, and specialized electronic devices. These applications depend not only on transition temperature but also on crystal alignment, mechanical strength, heat removal, and control of magnetic vortices."
    },
    {
      "heading": "Discovery and the expansion of high-temperature superconductivity",
      "text": "In 1986, J. Georg Bednorz and K. Alex Müller reported evidence for superconductivity near 35 K in a barium–lanthanum–copper oxide system. Their work at IBM’s Zurich laboratory followed a search among oxide ceramics for unusually strong interactions between electronic and lattice degrees of freedom. The result was striking because the highest established superconducting transition temperatures had previously been around 23 K in niobium–germanium compounds. Independent confirmation and identification of the relevant layered copper-oxide phase quickly established a new class of superconductors. Bednorz and Müller received the 1987 Nobel Prize in Physics for the discovery.\n\nA decisive practical milestone followed in 1987, when work by groups including those of Maw-Kuen Wu and Paul Chu established superconductivity above 90 K in yttrium–barium–copper oxide. The compound commonly called YBCO has an idealized composition \\(\\mathrm{YBa_2Cu_3O_{7-\\delta}}\\), with its properties strongly dependent on oxygen content. Crossing the liquid-nitrogen temperature threshold made cooling substantially less demanding than cooling with liquid helium. It also encouraged rapid investigation of ceramic processing, wires, thin films, and superconducting magnetic devices.\n\nFurther discoveries broadened both the chemistry and the accessible temperature range. Bismuth- and thallium-based cuprates were identified in 1988, followed by mercury-based superconducting cuprates in 1993. Mercury-based compounds with three copper–oxygen planes per structural block reach transition temperatures of roughly 133–135 K at ambient pressure. Under pressures of several tens of gigapascals, reported transitions in this family reach approximately 160 K or above. Exact values depend on composition, pressure conditions, and how the transition is defined. These figures refer to cuprates, not to an absolute upper limit for all superconducting materials.\n\nThe discovery of electron-doped superconductivity in compounds such as \\(\\mathrm{Nd_{2-x}Ce_xCuO_4}\\), reported in 1989, was conceptually important. It showed that superconductivity could develop when carriers were introduced on either side of the nominal electronic filling of the parent copper–oxygen plane. Electron- and hole-doped compounds nevertheless differ substantially in their magnetic phase diagrams, oxygen requirements, and electronic structures.\n\nDuring the 1990s, research shifted from finding higher transition temperatures toward determining the nature of the superconducting state. Phase-sensitive experiments provided strong evidence for a predominantly \\(d\\)-wave order parameter. Subsequent advances in photoemission, tunneling microscopy, scattering, and high-field measurements exposed a much richer normal state than had been anticipated from conventional superconductivity."
    },
    {
      "heading": "Crystal chemistry and the principal material families",
      "text": "The central structural element of a cuprate is a nearly square network of copper atoms linked by oxygen atoms. Each planar copper is coordinated by four in-plane oxygen neighbors. Additional oxygen atoms above or below a plane, called apical oxygens, may produce pyramidal or elongated octahedral coordination. Some electron-doped structures lack apical oxygen in their ideal form. The arrangement is commonly related to the crystallography of layered perovskite oxides, although not every cuprate is a simple perovskite derivative.\n\nCopper–oxygen planes are separated by layers containing alkaline-earth, rare-earth, bismuth, thallium, mercury, or other elements. These intervening blocks stabilize the structure and help control charge transfer into the planes. A unit cell may contain one, two, or three closely associated planes, with additional structural complexity in some families. Electrical transport is generally much easier parallel to the planes than perpendicular to them, reflecting strongly anisotropic electronic motion.\n\nThe lanthanum family, exemplified by \\(\\mathrm{La_{2-x}Sr_xCuO_4}\\), has one copper–oxygen plane per principal structural block and is widely used to study doping systematically. Replacing trivalent lanthanum with divalent strontium nominally introduces holes. In YBCO, two planes occur alongside copper–oxygen chains. Varying oxygen occupancy in the chains changes both their ordering and the charge transferred to the planes. Oxygen-rich YBCO is orthorhombic, whereas sufficiently oxygen-poor material adopts a different structural and electronic state.\n\nBismuth cuprates are often identified by numerical abbreviations. Bi-2212 denotes approximately \\(\\mathrm{Bi_2Sr_2CaCu_2O_{8+\\delta}}\\), while Bi-2223 denotes approximately \\(\\mathrm{Bi_2Sr_2Ca_2Cu_3O_{10+\\delta}}\\). These contain two and three copper–oxygen planes per block, respectively. Bi-2212 cleaves readily between weakly coupled layers, making it particularly useful for surface-sensitive experiments. Mercury compounds are labeled analogously: Hg-1201 has one plane, while Hg-1223 has three. These abbreviations summarize cation ratios rather than giving a complete account of oxygen occupancy or site disorder.\n\nComposition does not translate automatically into a known planar carrier concentration. Formal oxidation states provide useful bookkeeping, but the relevant electronic states are strongly hybridized combinations of copper and oxygen orbitals. Oxygen vacancies, interstitial oxygen, substitutional disorder, and unequal charge distribution among different planes can all matter. Consequently, nominally identical chemical formulas can have different transition temperatures after different thermal treatments.\n\nThe number of planes also does not provide a simple rule for maximizing \\(T_c\\). Within several families, transition temperature rises from one to three planes, but additional planes can produce unequal doping and other unfavorable changes. Apical-oxygen distance, lattice distortion, local disorder, and the chemistry of the separating layers modify the electronic environment alongside layer count."
    },
    {
      "heading": "The insulating parent compounds and strong electronic interactions",
      "text": "A conventional independent-electron description would suggest that many undoped cuprates should conduct electricity: a partially filled electronic band normally supplies mobile charge carriers. Instead, representative parent compounds such as \\(\\mathrm{La_2CuO_4}\\) are insulators. Their behavior demonstrates the importance of electron–electron repulsion beyond a simple band-structure picture. The relevant low-energy states contain substantial copper \\(3d_{x^2-y^2}\\) and oxygen \\(2p\\) character, with strong covalent mixing between them.\n\nIn an idealized ionic description, planar copper is close to \\(\\mathrm{Cu^{2+}}\\), with a \\(3d^9\\) configuration and one unpaired spin. Putting an additional electron onto an already occupied copper-centered state can carry a large electrostatic energy cost. Cuprate parent compounds are therefore closely related to a Mott insulator, in which interactions prevent conduction even though ordinary band filling would allow it. More specifically, many are classified as charge-transfer insulators: the lowest relevant charge excitations involve substantial transfer between oxygen and copper states rather than only between two copper sites.\n\nThe remaining copper moments interact through intervening oxygen atoms. This oxygen-mediated interaction, known as superexchange, generally favors antiparallel neighboring spins. It produces antiferromagnetic order at sufficiently low temperature in many parent compounds. For a square copper–oxygen plane, a useful magnetic description is\n\n\\[H_J=J\\sum_{\\langle i,j\\rangle}\\mathbf S_i\\cdot\\mathbf S_j,\\]\n\nwhere \\(J>0\\) favors antiparallel spins and \\(\\mathbf S_i\\) is the local spin operator. Nearest-neighbor exchange energies are typically of order \\(0.1\\) electronvolt, much larger than the thermal energy corresponding to many superconducting transition temperatures.\n\nThe strong magnetism is predominantly two-dimensional, but weak interplane couplings and magnetic anisotropies help stabilize three-dimensional order. In \\(\\mathrm{La_2CuO_4}\\), long-range antiferromagnetic order develops near 300 K, with the precise value affected by sample composition and quality. Substantial short-range spin correlations survive even when long-range order is absent. Introducing mobile carriers weakens the ordered magnetic state, but it does not immediately eliminate these local correlations.\n\nHole doping is not accurately pictured as simply converting isolated copper ions into independent \\(\\mathrm{Cu^{3+}}\\) ions. Added holes have substantial oxygen character and form strongly correlated states involving neighboring copper spins. The Zhang–Rice singlet is an influential approximation in which an oxygen-derived hole combines with a copper spin into a local singlet-like object. Its use helps motivate reduced one-band descriptions, although multiorbital effects remain important in many questions.\n\nThis starting point distinguishes cuprates from ordinary weakly interacting metals. Their superconducting carriers emerge from a correlated charge-transfer system, so changes in doping reorganize magnetism, electronic coherence, and optical spectral weight rather than merely shifting a fixed metallic band."
    },
    {
      "heading": "Doping, the superconducting dome, and competing electronic order",
      "text": "The phase diagram is commonly organized by temperature and planar carrier concentration. For hole-doped materials, \\(p\\) usually denotes the number of doped holes per planar copper relative to the parent state. As \\(p\\) increases, antiferromagnetism is suppressed, superconductivity appears, and \\(T_c\\) rises toward a maximum before falling again. This produces the familiar superconducting dome. Materials on the low-doping side are called underdoped; those near maximum \\(T_c\\), optimally doped; and those beyond it, overdoped.\n\nIn many hole-doped families, optimal doping lies near \\(p\\approx0.16\\), but this is an empirical guide rather than a universal constant. The superconducting region in relatively clean systems often extends approximately from \\(p\\sim0.05\\) to values around \\(0.25\\)–\\(0.30\\), with substantial family dependence. The upper and lower boundaries can move with disorder, structural changes, and the method used to estimate carrier concentration. In particular, oxygen content in YBCO is not numerically equivalent to planar hole density.\n\nThe underdoped region contains a pseudogap regime in which low-energy electronic spectral weight is suppressed above \\(T_c\\). Its characteristic temperature, often denoted \\(T^*\\), generally decreases with increasing hole doping. The pseudogap is not simply another name for superconductivity: it can exist without global superconducting coherence and has a strong dependence on electronic momentum. Different experimental probes identify related but not necessarily identical crossover scales.\n\nSeveral types of electronic order occur within this broader phase diagram. Charge-density-wave correlations have been observed in multiple cuprate families, including through resonant X-ray scattering. In some lanthanum-based materials, charge and spin modulations form stripe-like patterns. A conspicuous example is the suppression of bulk superconductivity near one-eighth hole doping in certain compounds, particularly \\(\\mathrm{La_{2-x}Ba_xCuO_4}\\). Structural distortions help stabilize the stripe state, so the effect is not equally strong in every cuprate at the same nominal doping.\n\nCharge order and superconductivity often compete for electronic states: a strong magnetic field that weakens superconductivity can enhance charge ordering. Their relationship is nevertheless more complicated than simple mutual exclusion. Short-range order may coexist with superconductivity, while spatially modulated pairing states have been investigated as possible descriptions of particular regimes. Electronic nematicity—rotational symmetry breaking without the full translational symmetry breaking of a stripe—has also been studied.\n\nElectron-doped compounds show a related but asymmetric phase diagram. Antiferromagnetism generally persists over a wider doping range, and superconductivity is especially sensitive to oxygen removal and annealing. Neither the detailed phase boundaries nor the phenomenology of the hole-doped pseudogap can be transferred unchanged to the electron-doped side."
    },
    {
      "heading": "Superconducting pairing and the evidence for a d-wave state",
      "text": "Like other superconductors, cuprates possess a coherent state associated with paired electronic charge. The pairs carry charge \\(2e\\), and the corresponding magnetic flux quantum is\n\n\\[\\Phi_0=\\frac{h}{2e},\\]\n\nwhere \\(h\\) is the Planck constant and \\(e\\) is the magnitude of the elementary charge. A Cooper pair in a cuprate should not be imagined as an isolated molecule. It is part of a collective quantum state whose pairing amplitude and phase describe correlations across the material.\n\nThe best-established pairing symmetry in the copper–oxygen planes is predominantly \\(d_{x^2-y^2}\\). A frequently used expression for its momentum dependence is\n\n\\[\\Delta(\\mathbf k)=\\frac{\\Delta_0}{2} \\left[\\cos(k_xa)-\\cos(k_ya)\\right],\\]\n\nwhere \\(a\\) is the in-plane lattice spacing and \\(\\Delta_0\\) sets the gap scale. This order parameter changes sign under a 90-degree rotation and vanishes along the diagonal directions \\(k_x=\\pm k_y\\). Where these lines intersect the relevant electronic states, they produce nodes: directions in which quasiparticles can be excited with arbitrarily small energy in an ideal clean sample.\n\nThe sign change is central, not merely the anisotropy of the gap magnitude. Phase-sensitive experiments using the Josephson effect established this distinction during the 1990s. In tricrystal experiments associated with C. C. Tsuei, J. R. Kirtley, and collaborators, appropriately oriented grain-boundary junctions produced spontaneous half-integer flux effects consistent with a sign-changing order parameter. These results are much more discriminating than observing a gap that simply varies with direction.\n\nIndependent measurements support the nodal picture. Angle-resolved photoemission maps the gap around momentum space and finds the characteristic suppression near diagonal directions. Low-temperature penetration-depth and thermal-conductivity measurements reveal low-energy excitations inconsistent with a simple isotropic, fully open gap. Disorder, orthorhombic crystal symmetry, and contributions from different bands can complicate the detailed angular form. A small additional symmetry component is possible in some materials without overturning the predominantly \\(d\\)-wave description.\n\nCuprate coherence lengths are short, often only about 1–2 nanometres within the planes in high-\\(T_c\\) compounds, with an even shorter perpendicular scale. This makes atomic-scale disorder and interfaces particularly consequential. Pairing and long-range phase coherence can also involve distinct energy scales, especially in underdoped materials, where the superfluid density is relatively low despite a large spectroscopic gap.\n\nEstablishing \\(d\\)-wave symmetry does not by itself identify the pairing mechanism. It strongly constrains possible theories because a viable explanation must generate the observed sign structure and account for its development from the correlated normal state."
    },
    {
      "heading": "The pseudogap, strange-metal transport, and experimental probes",
      "text": "The normal state of a cuprate is not simply the superconducting state with the resistance restored. In underdoped compounds, a pseudogap affects the density and momentum distribution of low-energy electronic excitations. In other regions, particularly around optimal doping, transport can differ markedly from the predictions of a conventional Fermi liquid. Understanding these normal states is essential because superconductivity develops out of them, and because a high magnetic field can reveal them at temperatures otherwise hidden beneath the superconducting transition.\n\nAngle-resolved photoemission spectroscopy measures the energy and momentum of electrons emitted from a sample. In suitable cleavable cuprates, it maps the electronic dispersion, superconducting gap, and spectral linewidth. Underdoped materials often show strong depletion of spectral weight near the antinodal regions, close to the copper–oxygen bond directions, while relatively coherent excitations survive near the diagonal nodal directions. Above \\(T_c\\), the visible low-energy spectral weight can resemble disconnected “Fermi arcs.” Whether such arcs represent parts of underlying closed structures depends on the regime and the interpretation of the spectral function.\n\nScanning tunneling microscopy and spectroscopy resolve local electronic structure on atomic scales. They reveal spatial variations in gap magnitude, impurity resonances, periodic charge modulations, and quasiparticle interference patterns. These observations expose a distinction between local electronic inhomogeneity and a spatially averaged spectrum. Surface preparation, tunneling matrix elements, and the layered termination must be considered when connecting these measurements to bulk properties.\n\nTransport provides a complementary view. In a conventional low-temperature Fermi liquid, electron–electron scattering often gives a resistivity contribution proportional to \\(T^2\\). Many cuprates instead exhibit broad intervals of approximately linear-in-temperature resistivity. Some analyses describe the associated relaxation rate using\n\n\\[\\frac{\\hbar}{\\tau}\\sim \\alpha k_{\\mathrm B}T,\\]\n\nwhere \\(\\hbar=h/(2\\pi)\\), \\(k_{\\mathrm B}\\) is the Boltzmann constant, and \\(\\alpha\\) is of order unity. This “Planckian” comparison is a useful empirical scale, not an established universal law or a unique explanation of the strange metal.\n\nBulk and momentum-resolved probes impose different constraints. Nuclear magnetic resonance tracks local magnetic response and spin relaxation. Neutron scattering measures spin correlations, while resonant X-ray scattering is sensitive to charge ordering. Optical conductivity tracks the frequency distribution of charge response, and heat capacity probes thermodynamic excitations.\n\nHigh-field quantum oscillations have revealed small electronic pockets in some underdoped cuprates, notably YBCO. These are consistent with reconstruction of the electronic structure by additional ordering, rather than with a simple unreconstructed large Fermi surface. Because the measurements require strong fields and low temperatures, their conclusions apply most directly to that field-stabilized regime."
    },
    {
      "heading": "Microscopic models and the unresolved pairing mechanism",
      "text": "Conventional superconductivity is often described by Bardeen–Cooper–Schrieffer theory, in which an effective attraction between electrons produces a paired ground state. In many conventional materials, lattice vibrations mediate the attraction. Cuprates retain fundamental features of superconductivity captured by this framework—pairing, phase coherence, and a gap—but their proximity to a correlated insulator and their predominantly \\(d\\)-wave symmetry make a straightforward weak-coupling, phonon-only account inadequate as a general description.\n\nThe Hubbard model is a central starting point. In a simplified one-band form,\n\n\\[H=-\\sum_{ij,\\sigma}t_{ij} \\left(c^\\dagger_{i\\sigma}c_{j\\sigma}+\\mathrm{h.c.}\\right) +U\\sum_i n_{i\\uparrow}n_{i\\downarrow}.\\]\n\nHere \\(t_{ij}\\) describes hopping between sites, \\(U\\) penalizes double occupancy, and \\(c^\\dagger_{i\\sigma}\\) creates an electron with spin \\(\\sigma\\) at site \\(i\\). In the strong-interaction limit, the model captures an insulating state near one electron per site and antiferromagnetic exchange of approximate scale \\(J=4t^2/U\\). The related \\(t\\)–\\(J\\) model explicitly excludes double occupancy and retains hopping plus exchange.\n\nThese models test whether repulsive electronic interactions alone can generate superconductivity. A momentum-dependent interaction can favor a sign-changing gap because repulsion between particular regions of momentum space need not act like a uniform repulsion against every possible pairing state. Antiferromagnetic spin fluctuations are therefore prominent candidates for promoting \\(d\\)-wave pairing. Various calculations find strong \\(d\\)-wave pairing tendencies, but the full finite-temperature phase diagram and the quantitative connection to real compounds remain difficult.\n\nA different influential perspective is the resonating-valence-bond approach associated with Philip W. Anderson. It begins with strong singlet correlations in a doped magnetic insulator and emphasizes how mobile charge and phase coherence can produce superconductivity from that background. Other approaches focus on quantum critical fluctuations, intertwined charge and superconducting orders, or more explicitly multiorbital physics. These descriptions are not always mutually exclusive, but their strongest claims are not interchangeable.\n\nLattice effects remain relevant even when the dominant pairing interaction is proposed to be electronic. Phonons, isotope substitution, bond distortions, and electron–lattice coupling influence spectra and can affect transition temperatures. An isotope effect is not by itself proof of a purely phonon-mediated mechanism, just as a strong magnetic response is not by itself proof that spin fluctuations cause pairing. A successful theory must distinguish interactions that drive pairing from effects that accompany or modify it.\n\nThe computational problem is substantial. Strongly correlated fermions are difficult to simulate without uncontrolled approximations, and many quantum Monte Carlo calculations encounter a sign problem. Numerical studies can differ because of lattice size, boundary conditions, interaction parameters, or competing low-energy states. Matching several observations simultaneously—pairing symmetry, pseudogap behavior, transport, doping dependence, and material-specific \\(T_c\\)—remains a more demanding test than reproducing any one feature."
    },
    {
      "heading": "Magnetic vortices, critical currents, and material processing",
      "text": "Cuprates are strongly type-II superconductors. Above a lower critical field, magnetic flux enters as quantized vortices while superconductivity survives between their cores. Only at a much larger upper critical field is the superconducting state destroyed. Short coherence lengths help produce very high upper critical fields, although thermal fluctuations and vortex motion can generate electrical dissipation well before that limiting field is reached.\n\nA vortex experiences a force when current flows across it. In the usual geometry, the force per unit vortex length has magnitude \\(J\\Phi_0\\), where \\(J\\) is current density. Moving vortices generate an electric field, so zero resistance in an applied magnetic field requires that vortices remain immobilized on the relevant timescale. This is the role of flux pinning: defects and spatial variations in superconducting properties create energetically favorable locations for vortex cores.\n\nUseful pinning sites include dislocations, nanoscale precipitates, irradiation tracks, and deliberately introduced oxide nanorods. Their dimensions, spacing, and orientation determine how effectively they obstruct vortices at a given temperature and field direction. For example, barium-zirconate-containing defects are used in some rare-earth barium copper oxide conductors to enhance current performance in magnetic fields. Increasing defect density without control can instead suppress superconductivity or degrade film connectivity.\n\nLayering introduces additional complications. In highly anisotropic bismuth compounds, vortices can behave approximately as stacks of two-dimensional “pancake” vortices coupled between layers. Thermal fluctuations can melt an ordered vortex solid into a mobile vortex liquid. Consequently, a material with a high \\(T_c\\) may carry relatively little loss-free current at 77 K in a strong field. YBCO and related rare-earth compounds generally have lower anisotropy and more favorable high-field current performance than the most strongly layered bismuth cuprates.\n\nGrain boundaries are another major limitation. In many cuprates, the critical current across a boundary falls sharply as the crystallographic misorientation angle increases. The \\(d\\)-wave order parameter, atomic disorder, strain, charge redistribution, and locally depressed superconductivity all contribute. A randomly oriented ceramic can therefore contain strongly superconducting grains yet carry a poor macroscopic transport current.\n\nProcessing must solve this connectivity problem while maintaining oxygen content and mechanical integrity. Bismuth-based wires exploit deformation and heat treatment to align plate-like grains. Modern rare-earth barium copper oxide tapes use textured buffer layers on a metal substrate so that the superconducting film grows with closely aligned crystal axes. The resulting conductor is a multilayer composite, not a freestanding piece of superconducting ceramic."
    },
    {
      "heading": "Conductors, magnets, and other applications",
      "text": "Practical cuprate conductors fall into several established forms. Bi-2223 is produced as multifilamentary tape, commonly in a silver-based matrix, using powder processing, deformation, and repeated heat treatment. Bi-2212 can be made into multifilamentary round wire and processed through a partial-melt heat treatment. Round-wire geometry permits cable architectures familiar from conventional superconducting magnets, although reaction conditions, oxygen control, and conductor uniformity require careful management.\n\nRare-earth barium copper oxides, often abbreviated REBCO, include YBCO and related compounds in which another suitable rare-earth element occupies the yttrium site. They are manufactured chiefly as coated-conductor tapes. A thin superconducting layer is deposited on a textured, buffered metal substrate and protected by metallic layers that also provide electrical stabilization. The superconducting film may be only a few micrometres thick, so engineering current density must account for the entire tape cross-section rather than only the active film.\n\nHigh-field magnets are a major application because cuprates retain useful current-carrying capability at fields that severely constrain many low-temperature superconductors. They can operate at liquid-helium temperatures for maximum field performance or at higher temperatures where the required field and current permit. A prominent milestone was the 32-tesla all-superconducting magnet completed at the US National High Magnetic Field Laboratory in 2017, combining a REBCO high-field insert with low-temperature superconducting outer coils.\n\nPower applications include demonstration cables, fault-current limiters, motors, generators, and specialized high-current links. Their operating advantages depend on the complete system: refrigeration, alternating-current losses, insulation, joints, reliability, and maintenance all matter. In an alternating magnetic field, vortex hysteresis and coupling between conductor components produce losses even when direct-current resistance is absent. High \\(T_c\\) alone therefore does not guarantee a lower-energy or lower-cost installation.\n\nThin-film cuprates also support microwave devices and superconducting quantum interference devices, or SQUIDs. Josephson junctions made using grain boundaries or engineered interfaces can operate at temperatures accessible with liquid nitrogen. Bulk, melt-textured REBCO can trap strong magnetic fields and is used in research on superconducting bearings, levitation systems, and compact trapped-field magnets.\n\nMechanical and thermal protection remain central engineering constraints. Large magnet currents produce substantial electromagnetic stress, while the ceramic superconducting layer is brittle. A transition to a resistive state, called a quench, can develop slowly along a high-temperature superconducting conductor, concentrating heat locally before a large terminal voltage appears. Stabilizing metals, reinforcement, sensitive detection, and suitable winding architectures are therefore essential parts of a working cuprate-based device."
    }
  ],
  "links": [
    "temperature",
    "pressure",
    "superconductivity",
    "condensed-matter-physics",
    "nobel-prize-in-physics",
    "crystallography",
    "unit-cell",
    "oxidation-state",
    "electronic-band-structure",
    "antiferromagnetism",
    "spin-angular-momentum",
    "charge-density-wave",
    "planck-constant",
    "elementary-charge",
    "cooper-pair",
    "order-parameter",
    "josephson-effect",
    "thermal-conductivity",
    "angle-resolved-photoemission-spectroscopy",
    "boltzmann-constant",
    "nuclear-magnetic-resonance",
    "heat-capacity",
    "bcs-theory",
    "phonon",
    "magnetic-field",
    "superconducting-quantum-interference-device"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}