{
  "id": "crevasse",
  "title": "Crevasse",
  "lang": "en",
  "source_lang": "en",
  "summary": "A crevasse is a fracture in glacier ice, formed by stresses associated with ice movement and sometimes enlarged or deepened by meltwater.",
  "category": "science",
  "subcategory": "earth-science",
  "type": "concept",
  "aliases": [
    "Glacial crevasse",
    "Glacier crevasse"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/crevasse/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/crevasse/",
      "json": "https://aiwiki.page/zh/crevasse.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A crevasse is a fracture or open fissure in the ice of a glacier, ice sheet, or ice shelf. Crevasses form when stresses associated with ice movement cause the ice to break rather than accommodate deformation entirely by slow flow. They range from narrow cracks to openings several metres wide and hundreds of metres long. Many extend only through the upper tens of metres of ice, although water-filled fractures and fractures in floating ice can penetrate much farther. Crevasses influence glacier drainage and ice breakup and are a major hazard where snow conceals their openings."
    },
    {
      "heading": "Formation and mechanics",
      "text": "Glaciers move under gravity through internal deformation and, in many settings, sliding over their beds. Movement is uneven: ice may accelerate over a steepening bed, spread as a valley widens, or slow against valley walls. These differences in velocity deform the ice and generate stresses.\n\nIce can deform gradually by creep, but it can also fracture. Whether it flows or breaks depends on the stress, the rate of deformation, temperature, ice structure, and existing flaws. Near the surface, where the weight of overlying ice produces relatively little confinement, tensile stresses can open cracks. A crevasse generally opens perpendicular to the greatest local tensile stress, although subsequent flow may rotate or distort it.\n\nAt greater depth, increasing pressure from the overlying ice tends to close air-filled cracks, while creep deforms their walls inward. This is why ordinary surface crevasses commonly occupy only the upper few tens of metres. There is no universal depth limit: the balance between opening and closure varies with ice temperature, stress, water content, and the surrounding geometry.\n\nCrevasses are therefore not simply evidence that ice is moving quickly. Relatively uniform motion can occur without extensive surface fracturing, whereas strong differences in motion over short distances can produce dense crevasse fields."
    },
    {
      "heading": "Main patterns and related features",
      "text": "Crevasses are often classified by their orientation relative to glacier flow. These patterns help reveal how a glacier is deforming, but they are not rigid categories.\n\n- Transverse crevasses extend broadly across the direction of flow. They commonly form where ice stretches along its flow direction, such as where it accelerates over a steeper section of bed.\n- Longitudinal crevasses run approximately parallel to flow. They commonly develop where ice spreads sideways, including where a confined glacier enters a wider valley or an unconfined terminus.\n- Marginal or shear crevasses occur near glacier edges, where faster central ice moves past slower ice near a valley wall. They commonly lie obliquely to the glacier margin.\n- Intersecting crevasses develop where stress directions vary or where existing fractures are carried into a different flow regime. Their intersections can divide the surface into unstable blocks.\n\nAn icefall is a steep, heavily fractured section of glacier, commonly produced as ice passes over a major bedrock step. Intersecting fractures may isolate towers or blocks called seracs, which can collapse as the glacier continues to move.\n\nA bergschrund is a large crevasse near the head of a mountain glacier, separating moving glacier ice from relatively stationary snow or ice above. It differs from a randkluft, a gap between ice and an adjacent rock wall, often enlarged by melting.\n\nCrevasses also occur within and beneath ice. Basal crevasses extend upward from the underside of a glacier or ice shelf and are especially important in floating ice, where seawater pressure can help keep them open."
    },
    {
      "heading": "Water and fracture propagation",
      "text": "Crevasses form important pathways in glacier hydrology. Surface meltwater may enter them directly or through streams and ponds, moving into the ice and sometimes reaching the bed.\n\nWater changes a fracture’s mechanics as well as its drainage role. In a sufficiently deep, water-filled crack, water pressure counteracts the tendency of the surrounding ice to close the fracture. Because liquid water is denser than ice, its pressure increases with depth more rapidly than the overburden pressure of an equivalent thickness of ice. Given a sufficient water supply and suitable stress conditions, this can help a fracture propagate downward through a process called hydrofracturing.\n\nNot every water-filled crevasse reaches the glacier bed. Propagation depends on the amount and continued supply of water, crack geometry, ice stresses, and possible drainage routes. A fracture may stop growing, drain, or close.\n\nSome crevasses help establish moulins, roughly vertical shafts that carry surface water into a glacier. A moulin is not simply another name for a crevasse: it is a drainage feature that can be enlarged and maintained by flowing water. Water reaching the bed may alter basal water pressure and glacier sliding, but the effect depends on how efficiently the subglacial drainage system carries it away."
    },
    {
      "heading": "Evolution and ice breakup",
      "text": "A crevasse moves with the ice in which it formed. As it travels downstream, it may widen, rotate, become compressed, or close. Snowfall can bury its opening, and refreezing water can partly or completely fill it. Consequently, a glacier’s visible fracture pattern records both present stresses and the deformation history of ice transported from upstream.\n\nOn ice shelves and at glacier termini, fractures can contribute to calving, the detachment of icebergs or smaller ice blocks. Surface and basal crevasses may grow or interact until a larger fracture develops. In ice-shelf terminology, a rift generally denotes a major fracture extending through the ice thickness, rather than an ordinary shallow surface crevasse.\n\nSurface meltwater and hydrofracturing have contributed to the breakup of some ice shelves. However, the appearance of crevasses alone does not establish that collapse is imminent. Fracture development interacts with ice thickness, ocean conditions, flow stresses, and the support supplied by surrounding or downstream ice."
    },
    {
      "heading": "Observation and scientific significance",
      "text": "Crevasses provide evidence about glacier strain and stress. Their orientation and distribution can help identify extending flow, lateral spreading, shear margins, and changes in the influence of the glacier bed. Interpretation requires care because older fractures may persist after the conditions that formed them have changed.\n\nResearchers map crevasses using field observations, aerial photography, and remote sensing. Satellite imagery can reveal extensive fracture systems, while repeated images show how they move and evolve. Airborne laser measurements and photogrammetry help describe surface geometry; ground-penetrating radar can detect some buried crevasses and internal fracture structures.\n\nEach method has limitations. Snow may hide surface openings, image resolution may be insufficient for narrow cracks, and radar responses depend on fracture geometry and whether a void contains air, water, or refrozen ice. Numerical models likewise simplify complex fracture processes, so a crevasse map is not by itself a complete measure of glacier stability."
    },
    {
      "heading": "Hazards",
      "text": "An open crevasse may be conspicuous, but a snow bridge can conceal a deep opening. Such bridges form when snow accumulates across a crevasse and may weaken through melting or deformation. Their appearance does not reliably indicate their load-bearing strength.\n\nCrevasse falls can cause serious injury, while cold exposure and difficult access complicate rescue. Heavily fractured terrain also presents hazards from collapsing seracs and unstable crevasse edges. Glacier travel and fieldwork therefore involve specialized hazard assessment, equipment, and rescue techniques; visible tracks or an apparently smooth snow surface do not demonstrate the absence of crevasses."
    }
  ],
  "links": [
    "glacier",
    "ice-sheet",
    "ice-shelf",
    "gravity",
    "temperature",
    "pressure",
    "serac",
    "water",
    "remote-sensing"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}