{
  "id": "cleavage-mineralogy",
  "title": "Cleavage (Mineralogy)",
  "lang": "en",
  "source_lang": "en",
  "summary": "Cleavage is the tendency of a crystalline mineral to split along particular crystallographic planes, reflecting directional differences in its atomic structure and bonding.",
  "category": "science",
  "subcategory": "earth-science",
  "type": "concept",
  "aliases": [
    "Mineral cleavage",
    "Crystal cleavage"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/cleavage-mineralogy/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/cleavage-mineralogy/",
      "json": "https://aiwiki.page/zh/cleavage-mineralogy.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Cleavage is the tendency of a mineral to break preferentially along particular planes in its crystal structure, producing relatively flat surfaces with consistent orientations. It reflects directional differences in atomic arrangement and chemical bonding. Cleavage is an important diagnostic property in mineral identification and helps explain how crystalline materials respond to mechanical stress. A mineral may have one or several cleavage directions, or no readily observable cleavage."
    },
    {
      "heading": "Structural basis",
      "text": "A crystal contains a repeating arrangement of atoms, ions, or other structural units. The resistance to separation varies with direction because different planes intersect different numbers and types of bonds. Cleavage occurs along planes where separation is comparatively favorable. Such planes often lie between strongly bonded layers or pass through regions with relatively weak bonding.\n\nGraphite, for example, consists of sheets with strong bonds within each sheet and much weaker van der Waals interactions between sheets. It therefore cleaves readily parallel to the sheets. Diamond also exhibits cleavage, despite its strong three-dimensional network of covalent bonds: some crystallographic planes are easier to separate than others.\n\nCleavage is consequently not a direct measure of overall bond strength or hardness. Hardness describes resistance to scratching, whereas cleavage describes a preferred mode and orientation of breakage. A hard mineral can have excellent cleavage, and a comparatively soft mineral can lack it.\n\nThe formation of a cleavage crack requires energy to create new surfaces. Its actual path also depends on defects, loading direction, crack propagation, and the surrounding environment. Cleavage therefore reflects both crystal structure and the conditions under which breakage occurs."
    },
    {
      "heading": "Cleavage planes and crystallographic notation",
      "text": "Cleavage planes are described using the conventions of crystallography. Miller indices specify their orientation relative to the crystal axes. Parentheses, such as \\((001)\\), designate a particular plane orientation; braces, such as \\(\\{001\\}\\), designate a set of symmetry-equivalent planes.\n\nA cleavage direction is a distinct orientation of parallel cleavage planes, not an individual visible surface. Many parallel cracks or sheets therefore represent only one cleavage direction. Opposite, parallel faces of a cleavage fragment likewise belong to the same direction.\n\nThe angles between cleavage planes are especially useful for identifying minerals. These angles are constrained by crystal structure, although rough surfaces, deformation, and the orientation of the specimen can make them difficult to measure accurately."
    },
    {
      "heading": "Principal cleavage patterns",
      "text": "Cleavage is commonly classified by the number and geometrical arrangement of its directions.\n\nPattern | Cleavage directions | Typical geometry and examples\nBasal | 1 | Splitting into sheets or plates; characteristic of [[mica\nPrismatic | 2 | Intersecting planes parallel to a common direction; common in pyroxenes and amphiboles\nCubic | 3 | Three mutually perpendicular directions, producing cube-like fragments; characteristic of [[halite\nRhombohedral | 3 | Three directions that do not meet at right angles, producing rhombohedral fragments; characteristic of [[calcite\nOctahedral | 4 | Four directions corresponding to octahedral faces; characteristic of [[fluorite\nDodecahedral | 6 | Six directions corresponding to rhombic-dodecahedral faces; traditionally exemplified by sphalerite\n\nThese names describe the arrangement of cleavage planes, not necessarily the external shape of an unbroken crystal. A mineral with cubic cleavage need not occur as a naturally grown cube.\n\nTwo-direction cleavage is particularly useful in distinguishing some common rock-forming minerals. Pyroxenes typically have cleavage intersections close to \\(90^\\circ\\), whereas amphiboles typically show angles near \\(56^\\circ\\) and \\(124^\\circ\\). Feldspars also commonly display two cleavage directions meeting approximately at right angles. These features must be interpreted alongside other properties rather than used as unique identifiers.\n\nA cleavage fragment does not always display every possible direction. Some planes may be poorly developed, obscured by other breakage surfaces, or absent from the exposed part of the specimen."
    },
    {
      "heading": "Quality and description",
      "text": "Cleavage quality describes how readily a mineral separates along its characteristic planes and how well those planes are expressed. Common terms include:\n\n- Perfect: cleavage develops very readily and produces highly regular surfaces.\n- Good or distinct: cleavage is clearly recognizable, although other breakage surfaces may also occur.\n- Fair or imperfect: cleavage is less consistently developed and may be difficult to recognize.\n- Poor or indistinct: only weak evidence of preferred planar breakage is visible.\n\nTerminology varies among mineralogical references, and these categories are qualitative rather than a universal numerical scale. Different directions within one mineral can have different cleavage qualities.\n\nDescriptions therefore often combine quality, number of directions, and crystallographic orientation. A mica may be described as having perfect basal cleavage, while another mineral may have one good cleavage direction and additional poorer directions."
    },
    {
      "heading": "Cleavage, fracture, parting, and crystal faces",
      "text": "Several features can resemble cleavage but have different origins.\n\nFracture\n\nIn mineral identification, fracture describes breakage that does not follow cleavage planes. It may be uneven, splintery, fibrous, or conchoidal. Conchoidal fracture produces curved, shell-like surfaces and is characteristic of quartz, which lacks readily observable cleavage.\n\nCleavage and fracture are not mutually exclusive properties of a mineral specimen: a mineral can cleave along preferred planes and fracture in other directions. In the broader terminology of materials science, cleavage itself is a mode of brittle fracture.\n\nParting\n\nParting is planar separation associated with particular structural features, such as twin boundaries, deformation-related planes, or layers produced by the separation of mineral phases. Unlike ordinary cleavage, it is not necessarily developed throughout every crystal of the mineral.\n\nParting can closely resemble cleavage in a hand specimen. Its recognition may require examination of the distribution of planes or independent evidence about the crystal’s internal structure.\n\nCrystal faces\n\nA natural crystal face develops during growth, whereas a cleavage surface forms through breakage. Both may be flat and reflective, and they may even have the same orientation. Repeated parallel surfaces, internal cracks, and stepped breakage can support recognition of cleavage, but surface flatness alone is insufficient."
    },
    {
      "heading": "Observation and identification",
      "text": "In hand specimens, cleavage is commonly recognized by groups of parallel, reflective surfaces. Rotating a specimen under a light source can reveal surfaces that reflect simultaneously because they share an orientation. Broken edges may show repeated steps corresponding to successive parallel cleavage planes.\n\nIn thin sections examined with a microscope, cleavage cracks appear as traces where cleavage planes intersect the section. Their visibility and apparent intersection angles depend on the cutting orientation. A section parallel to a cleavage plane may show little evidence of that cleavage, and an oblique section may display angles different from the true angles between the planes.\n\nCleavage is most informative when combined with hardness, crystal habit, density, color, streak, and optical properties. Very fine grain size, alteration, weathering, and intergrowth with other minerals can obscure it. Structural methods such as X-ray diffraction provide additional evidence when visual identification is inconclusive."
    },
    {
      "heading": "Historical and practical significance",
      "text": "Cleavage helped establish the connection between a crystal’s external geometry and its internal organization before atomic structures could be measured directly. In the late eighteenth century, René Just Haüy used observations of cleavage fragments, particularly those of calcite, in developing a geometrical theory of crystal structure. His structural units were not equivalent to modern atomic models, but the work contributed to the development of crystallography.\n\nCleavage remains important in mineral processing, stone working, and gemstone cutting. It influences the shapes of crushed mineral particles and the susceptibility of gemstones to splitting during cutting or impact. Mica’s basal cleavage permits the production of thin sheets, while fresh cleavage surfaces of layered crystals are useful substrates for studies of surfaces.\n\nMineral cleavage must also be distinguished from rock cleavage, a fabric along which a rock splits preferentially. Slaty cleavage, for example, commonly reflects the preferred orientation of platy minerals and other deformation-related processes. Although individual mineral cleavages can contribute to this behavior, rock cleavage is a property of the aggregate rather than simply a crystallographic plane in one crystal."
    }
  ],
  "links": [
    "mineral",
    "chemical-bond",
    "atom",
    "graphite",
    "van-der-waals-forces",
    "diamond",
    "crystallography",
    "miller-indices",
    "calcite",
    "quartz",
    "microscope",
    "density"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}