{
  "id": "clapeyron-equation",
  "title": "Clapeyron Equation",
  "lang": "en",
  "source_lang": "en",
  "summary": "The Clapeyron equation relates the slope of a phase-equilibrium boundary to the entropy and volume changes accompanying a phase transition.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Clapeyron phase-equilibrium equation"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/clapeyron-equation/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/clapeyron-equation/",
      "json": "https://aiwiki.page/zh/clapeyron-equation.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The Clapeyron equation is an exact relation in thermodynamics that describes how equilibrium pressure changes with temperature along a boundary between two phases of a pure substance. It relates the slope of that boundary to the entropy and volume changes associated with a first-order phase transition. The equation applies to melting, vaporization, sublimation, and transitions between different solid phases. Its familiar vapor-pressure approximation, the Clausius–Clapeyron equation, follows when additional assumptions are made about the properties of the phases."
    },
    {
      "heading": "Mathematical statement",
      "text": "For two phases, \\(\\alpha\\) and \\(\\beta\\), coexisting at equilibrium, the Clapeyron equation is\n\n\\[\\frac{dp}{dT} = \\frac{\\Delta s}{\\Delta v} = \\frac{\\Delta h}{T\\,\\Delta v},\\]\n\nwhere:\n\n- \\(p\\) is the equilibrium pressure;\n- \\(T\\) is the absolute temperature;\n- \\(\\Delta s=s_\\beta-s_\\alpha\\) is the change in molar entropy;\n- \\(\\Delta v=v_\\beta-v_\\alpha\\) is the change in molar volume;\n- \\(\\Delta h=h_\\beta-h_\\alpha\\) is the change in molar enthalpy.\n\nAll phase properties are evaluated at the same coexistence temperature and pressure. The derivative \\(dp/dT\\) is taken along the phase boundary, not at constant volume or along an arbitrary heating path.\n\nThe enthalpy change is the molar latent heat of the transition. At equilibrium,\n\n\\[\\Delta h=T\\Delta s.\\]\n\nMass-specific quantities may be used instead of molar quantities, provided that entropy, enthalpy, and volume all use the same basis. Reversing the direction assigned to the transition reverses the signs of both numerator and denominator, leaving the boundary slope unchanged.\n\nIn SI units, the slope has units of pascals per kelvin:\n\n\\[\\frac{\\mathrm{J\\,mol^{-1}}} {\\mathrm{K}\\,\\mathrm{m^3\\,mol^{-1}}} = \\mathrm{Pa\\,K^{-1}}.\\]"
    },
    {
      "heading": "Derivation from phase equilibrium",
      "text": "For a pure substance, two phases are in thermodynamic equilibrium when their chemical potentials are equal:\n\n\\[\\mu_\\alpha(T,p)=\\mu_\\beta(T,p).\\]\n\nThe chemical potential of a pure phase is its molar Gibbs free energy. For a simple compressible substance,\n\n\\[d\\mu=-s\\,dT+v\\,dp.\\]\n\nMoving infinitesimally along the coexistence boundary preserves equality of chemical potentials, so\n\n\\[-s_\\alpha\\,dT+v_\\alpha\\,dp = -s_\\beta\\,dT+v_\\beta\\,dp.\\]\n\nRearranging gives\n\n\\[(v_\\beta-v_\\alpha)\\,dp = (s_\\beta-s_\\alpha)\\,dT,\\]\n\nand therefore\n\n\\[\\frac{dp}{dT}=\\frac{\\Delta s}{\\Delta v}.\\]\n\nAt coexistence, the difference in molar Gibbs free energy is zero:\n\n\\[\\Delta g=\\Delta h-T\\Delta s=0.\\]\n\nSubstituting \\(\\Delta s=\\Delta h/T\\) yields the latent-heat form.\n\nThis derivation does not assume that either phase behaves as an ideal gas, that the latent heat is constant, or that a condensed phase has negligible volume."
    },
    {
      "heading": "Physical interpretation",
      "text": "Temperature and pressure favor phases in different ways. Increasing temperature favors the phase with greater entropy; increasing pressure favors the phase with smaller molar volume. The Clapeyron equation states how pressure and temperature must change together to preserve coexistence.\n\nVaporization and sublimation\n\nFor vaporization, the vapor generally has both greater entropy and greater molar volume than the liquid:\n\n\\[\\Delta s_{\\mathrm{vap}}>0, \\qquad \\Delta v_{\\mathrm{vap}}>0.\\]\n\nConsequently,\n\n\\[\\frac{dp_{\\mathrm{sat}}}{dT}>0.\\]\n\nThe saturation vapor pressure therefore rises with temperature. Sublimation from solid to vapor has the same sign pattern.\n\nBoiling occurs when the saturation vapor pressure of a liquid equals the pressure acting on it. The positive coexistence slope explains why lowering external pressure lowers the boiling temperature and raising it increases the boiling temperature.\n\nMelting\n\nMelting usually increases entropy. Its pressure dependence therefore depends principally on the volume change:\n\n- If the liquid occupies more volume than the solid, the melting curve has a positive slope.\n- If the liquid occupies less volume than the solid, the melting curve has a negative slope.\n\nOrdinary ice melting to liquid water near atmospheric pressure is an important example of the second case. Liquid water is denser than ordinary ice, so \\(\\Delta v_{\\mathrm{fus}}<0\\), and increasing pressure lowers the melting temperature locally.\n\nThe inverse form is often useful:\n\n\\[\\frac{dT}{dp} = \\frac{T\\Delta v}{\\Delta h}.\\]\n\nNear \\(0\\,^\\circ\\mathrm{C}\\) and atmospheric pressure, representative water properties give approximately\n\n\\[\\frac{dT_{\\mathrm m}}{dp} \\approx -0.074\\ \\mathrm{K\\,MPa^{-1}}.\\]\n\nThis is a local slope, not a formula that can be extrapolated indefinitely: different ice structures become stable at higher pressures.\n\nSolid–solid transitions\n\nThe equation also describes equilibrium transformations between crystalline structures. Because the volume differences can be small, solid–solid phase boundaries may have steep slopes. Their signs depend on the entropy and volume changes, rather than simply on whether a material is heated or compressed.\n\nSuch relations are important in geology, where mineral phase boundaries help describe changes in stable mineral assemblages within planetary interiors."
    },
    {
      "heading": "Relation to the Clausius–Clapeyron equation",
      "text": "For liquid–vapor equilibrium, the exact equation is\n\n\\[\\frac{dp_{\\mathrm{sat}}}{dT} = \\frac{\\Delta h_{\\mathrm{vap}}} {T(v_{\\mathrm g}-v_{\\mathrm l})}.\\]\n\nTwo approximations lead to the commonly used Clausius–Clapeyron form:\n\n- The liquid molar volume is negligible compared with the vapor molar volume.\n- The vapor obeys the ideal-gas law, so \\(v_{\\mathrm g}=RT/p_{\\mathrm{sat}}\\), where \\(R\\) is the molar gas constant.\n\nThen\n\n\\[\\frac{dp_{\\mathrm{sat}}}{dT} \\approx \\frac{p_{\\mathrm{sat}}\\Delta h_{\\mathrm{vap}}}{RT^2},\\]\n\nor equivalently,\n\n\\[\\frac{d\\ln p_{\\mathrm{sat}}}{dT} \\approx \\frac{\\Delta h_{\\mathrm{vap}}}{RT^2}.\\]\n\nIf the enthalpy of vaporization is additionally treated as constant over the temperature interval, integration gives\n\n\\[\\ln\\!\\left(\\frac{p_2}{p_1}\\right) \\approx -\\frac{\\Delta h_{\\mathrm{vap}}}{R} \\left(\\frac{1}{T_2}-\\frac{1}{T_1}\\right).\\]\n\nThe pressure ratio makes the logarithm dimensionless. When latent heat varies appreciably with temperature, the corresponding relation is\n\n\\[\\ln\\!\\left(\\frac{p_2}{p_1}\\right) \\approx \\int_{T_1}^{T_2} \\frac{\\Delta h_{\\mathrm{vap}}(T)}{RT^2}\\,dT.\\]\n\nThus, the exact Clapeyron equation and the approximate vapor-pressure equation should not be treated as interchangeable. In particular, ideal-vapor and negligible-liquid-volume assumptions become poor near the critical point."
    },
    {
      "heading": "Applications",
      "text": "Determining transition enthalpies\n\nIf a phase-boundary slope and the molar volumes of both phases are known, the transition enthalpy can be obtained from\n\n\\[\\Delta h = T\\,\\Delta v\\,\\frac{dp}{dT}.\\]\n\nThis provides an indirect thermodynamic method for determining latent heat and checking values measured by calorimetry. The result depends on the accuracy of both the boundary slope and the volume difference.\n\nConstructing phase boundaries\n\nGiven a known coexistence point and reliable phase properties, the equation can be integrated numerically to trace a phase boundary. An equation of state or other property model supplies the enthalpies and volumes as pressure and temperature change.\n\nThe resulting curves are used in material-property calculations, refrigeration, steam engineering, and phase-equilibrium modeling. The differential equation requires an initial coexistence point; a slope relation alone does not establish the absolute location of a boundary.\n\nAtmospheric thermodynamics\n\nThe Clausius–Clapeyron approximation describes the strong temperature dependence of water's saturation vapor pressure. Around ordinary near-surface temperatures, its fractional increase is roughly \\(6\\)–\\(7\\%\\) per kelvin, with the precise value depending on temperature and whether saturation is defined over liquid water or ice.\n\nThis relationship is important in studies of atmospheric moisture and climate change. It describes saturation vapor pressure, however, not a universal rate of change for actual humidity or precipitation. Those quantities also depend on circulation, moisture supply, and other processes."
    },
    {
      "heading": "Scope and limitations",
      "text": "The standard Clapeyron equation concerns equilibrium coexistence between two bulk phases of a pure substance under a common hydrostatic pressure. Several qualifications matter:\n\n- Nonequilibrium transitions: Superheating, supercooling, and hysteresis can shift an observed transformation away from the equilibrium boundary. The equation does not determine nucleation rates or transformation speeds.\n- Critical behavior: At a liquid–vapor critical point, both \\(\\Delta h\\) and \\(\\Delta v\\) vanish. Direct substitution gives an indeterminate ratio; the slope must be considered as a limit along the coexistence curve.\n- Continuous transitions: When entropy and volume are continuous across a transition, the ordinary finite-jump form does not determine the boundary slope. Under suitable conditions, relations involving response-function discontinuities are needed instead.\n- Mixtures: In multicomponent systems, coexistence also depends on the compositions of the phases. Equality of each component's chemical potential must be considered, so the pure-substance formula is generally insufficient.\n- Interfaces and additional forces: Curved interfaces, nonhydrostatic stresses, and applied fields can introduce additional contributions to equilibrium conditions. The simplest equation does not include them.\n\nAt a point where \\(\\Delta v=0\\) but \\(\\Delta s\\ne0\\), the \\(dp/dT\\) form has a divergent slope; the equivalent relation \\(dT/dp=\\Delta v/\\Delta s\\) remains meaningful."
    },
    {
      "heading": "Historical development and terminology",
      "text": "The equation is named after the French engineer and physicist Émile Clapeyron. His 1834 treatment of heat engines developed ideas associated with the Carnot cycle and established a relation between latent heat and the pressure–temperature dependence of phase equilibrium. Rudolf Clausius subsequently developed the thermodynamic treatment in the nineteenth century; the vapor-pressure relation is commonly associated with both names.\n\nTerminology varies: “Clausius–Clapeyron equation” sometimes denotes the general coexistence relation, although many texts reserve that name for the vapor-pressure approximation. The equation should also be distinguished from the ideal-gas equation \\(pV=nRT\\), which is called the Clapeyron equation in some educational traditions but describes a different relationship."
    }
  ],
  "links": [
    "thermodynamics",
    "pressure",
    "temperature",
    "phase-transition",
    "entropy",
    "enthalpy",
    "latent-heat",
    "international-system-of-units",
    "thermodynamic-equilibrium",
    "chemical-potential",
    "gibbs-free-energy",
    "water",
    "geology",
    "ideal-gas",
    "gas-constant",
    "critical-point",
    "calorimetry",
    "equation-of-state",
    "climate-change",
    "carnot-cycle"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}