{
  "id": "chromaticity",
  "title": "Chromaticity",
  "lang": "en",
  "source_lang": "en",
  "summary": "Chromaticity describes the color quality of a light stimulus independently of its luminance, usually through two coordinates in a standardized colorimetric system.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/chromaticity/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/chromaticity/",
      "json": "https://aiwiki.page/zh/chromaticity.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Chromaticity is the specification of a color stimulus independently of its overall intensity. In colorimetry, it is commonly represented by two coordinates derived from three tristimulus values, such as the \\(x,y\\) coordinates of the CIE 1931 system. Together with luminance, these coordinates specify a stimulus color for a defined standard observer. Chromaticity is associated with hue and saturation, but it is not a complete description of perceived appearance: illumination, visual adaptation, surrounding colors, and viewing conditions also matter."
    },
    {
      "heading": "Colorimetric basis",
      "text": "Human daylight color vision is approximately trichromatic: matching a light stimulus generally requires three independent primary-light components. This property arises from the responses of three classes of cone photoreceptors, whose spectral sensitivities overlap. Standard colorimetric systems describe color matches rather than identifying a unique physical spectrum.\n\nThe International Commission on Illumination, commonly abbreviated CIE, established the CIE 1931 standard colorimetric observer and XYZ system in 1931. The standard observer represents average color-matching behavior under specified experimental conditions; it does not reproduce every individual's vision. The 1931 observer is conventionally associated with a \\(2^\\circ\\) field of view. A supplementary \\(10^\\circ\\) standard observer was introduced in 1964.\n\nFor a stimulus with spectral distribution \\(S(\\lambda)\\), its XYZ tristimulus values can be calculated as\n\n\\[X=k\\int S(\\lambda)\\,\\overline{x}(\\lambda)\\,d\\lambda,\\]\n\n\\[Y=k\\int S(\\lambda)\\,\\overline{y}(\\lambda)\\,d\\lambda,\\]\n\n\\[Z=k\\int S(\\lambda)\\,\\overline{z}(\\lambda)\\,d\\lambda.\\]\n\nHere \\(\\lambda\\) is wavelength, \\(\\overline{x}\\), \\(\\overline{y}\\), and \\(\\overline{z}\\) are the observer's color-matching functions, and \\(k\\) sets the normalization or photometric scale. The \\(Y\\) value is proportional to luminance and can equal luminance when the appropriate absolute units and normalization are used.\n\nFor a reflecting object, the stimulus spectrum depends on both the illuminant spectrum and the object's spectral reflectance, as well as measurement geometry. Chromaticity is therefore not generally an illumination-independent property of a material."
    },
    {
      "heading": "CIE 1931 chromaticity coordinates",
      "text": "The CIE 1931 chromaticity coordinates are obtained by normalizing the tristimulus values:\n\n\\[x=\\frac{X}{X+Y+Z},\\qquad y=\\frac{Y}{X+Y+Z},\\qquad z=\\frac{Z}{X+Y+Z}.\\]\n\nBecause\n\n\\[x+y+z=1,\\]\n\nonly two coordinates are independent. The usual chromaticity diagram plots \\(y\\) against \\(x\\).\n\nMultiplying \\(X,Y,Z\\) by the same positive factor leaves chromaticity unchanged. This removes information about absolute stimulus level: two lights with the same relative spectral distribution but different intensities have the same chromaticity.\n\nThe combined specification \\(xyY\\) retains chromaticity and luminance. For \\(y\\ne0\\), conversion back to XYZ is\n\n\\[X=\\frac{xY}{y},\\qquad Z=\\frac{(1-x-y)Y}{y}.\\]\n\nAt \\(X=Y=Z=0\\), chromaticity is undefined because the normalization denominator is zero. A displayed black therefore does not have an intrinsic chromaticity in this mathematical sense, although a real display's nonzero black-level emission can be measured."
    },
    {
      "heading": "The chromaticity diagram",
      "text": "Spectral locus and line of purples\n\nThe physically realizable region of the CIE \\(xy\\) diagram is bounded by the curved spectral locus and the straight line of purples.\n\nThe spectral locus represents monochromatic light at different visible wavelengths. The line of purples joins the short- and long-wavelength ends of that locus. Its intermediate points represent mixtures of short- and long-wavelength light rather than individual wavelengths.\n\nMixtures of physically realizable light spectra lie within this boundary. Points outside it do not correspond to realizable nonnegative spectral distributions, even though they may appear in mathematical descriptions of color spaces.\n\nA printed or screen-rendered chromaticity diagram is necessarily approximate. Its colors are limited by the reproduction device's gamut, and the diagram itself does not show the full range of visible chromaticities accurately.\n\nWhite points\n\nA white point is a reference chromaticity used to define an adopted white for a colorimetric task or imaging system. The equal-energy stimulus has\n\n\\[x=y=z=\\frac{1}{3},\\]\n\nbut this point is not the universal white of all viewing conditions.\n\nOther white points are specified by standard illuminants. For example, CIE standard illuminant D65 represents a phase of daylight and has approximate coordinates \\(x=0.3127,\\ y=0.3290\\) for the CIE 1931 \\(2^\\circ\\) observer.\n\nChromatic adaptation allows the visual system to adjust to different illumination conditions. Consequently, stimuli with different chromaticities can each appear white in different viewing environments.\n\nDominant wavelength and excitation purity\n\nRelative to a chosen white point, many chromaticities can also be described by a dominant wavelength and an excitation purity.\n\nA line drawn from the white point through the stimulus chromaticity usually meets the spectral locus. The wavelength at that intersection is the dominant wavelength. Excitation purity is the ratio of the distance from white to the stimulus to the distance from white to that boundary intersection.\n\nFor chromaticities in the purple region, the outward line reaches the line of purples rather than the spectral locus. A complementary wavelength can instead be specified using the intersection in the opposite direction.\n\nThese quantities depend on the reference white. Excitation purity is a colorimetric construction, not a general numerical measure of perceived saturation."
    },
    {
      "heading": "Additive mixing and display gamuts",
      "text": "XYZ tristimulus values are additive. If two independent lights are superimposed, their corresponding tristimulus values add:\n\n\\[(X,Y,Z)_{\\mathrm{mix}} =(X_1+X_2,\\;Y_1+Y_2,\\;Z_1+Z_2).\\]\n\nTheir mixture's chromaticity lies on the straight line segment joining their chromaticity coordinates. Its position is weighted by the contributions \\(X+Y+Z\\), not generally by equal electrical drive values or equal luminance.\n\nFor three fixed primaries, additive mixtures occupy the triangle connecting their chromaticities. This explains why an RGB display has a triangular chromaticity gamut when its primary spectra are fixed. Its full three-dimensional gamut also depends on the available intensity of each primary.\n\nChromaticity geometry helps determine whether a target lies within a device's possible range, but it does not establish the drive signals needed to produce it. That requires primary characterization, transfer functions, and calibration. Nor does straight-line additive mixing directly describe paint or ink mixtures: their spectra result from wavelength-dependent absorption and scattering."
    },
    {
      "heading": "Other chromaticity coordinate systems",
      "text": "The CIE 1931 \\(xy\\) diagram is not perceptually uniform. Equal distances in different regions do not represent equal perceived color differences. Experiments represented by MacAdam ellipses illustrate this variation: small regions of approximately equal color discriminability have different sizes and orientations across the diagram.\n\nAlternative coordinates reduce, but do not eliminate, these differences.\n\nCIE 1960 UCS\n\nThe CIE 1960 Uniform Chromaticity Scale uses\n\n\\[u=\\frac{4X}{X+15Y+3Z},\\qquad v=\\frac{6Y}{X+15Y+3Z}.\\]\n\nThis diagram remains important in the conventional definition of correlated color temperature.\n\nCIE 1976 UCS\n\nThe CIE 1976 diagram uses\n\n\\[u'=\\frac{4X}{X+15Y+3Z},\\qquad v'=\\frac{9Y}{X+15Y+3Z}.\\]\n\nThus \\(u'=u\\) and \\(v'=1.5v\\). In terms of \\(x,y\\),\n\n\\[u'=\\frac{4x}{-2x+12y+3},\\qquad v'=\\frac{9y}{-2x+12y+3}.\\]\n\nThese coordinates are used in lighting and display specifications. They also underlie the chromatic components of CIELUV, which includes a lightness coordinate and a reference white. Distances in the chromaticity diagram alone should not be confused with full three-dimensional color differences."
    },
    {
      "heading": "Color temperature",
      "text": "The chromaticities of ideal thermal radiators form the Planckian locus, calculated from blackbody radiation at different temperatures. The temperature of a blackbody specifies its position on this locus.\n\nFor an approximately white source whose chromaticity is near the locus, correlated color temperature identifies the temperature of a closely corresponding Planckian radiator using a specified chromaticity-distance convention. It is expressed in kelvins.\n\nColor temperature is not a complete chromaticity specification. Sources with the same correlated color temperature can lie on different sides of the Planckian locus. An additional quantity, commonly \\(D_{uv}\\), describes displacement from the locus in the CIE 1960 diagram.\n\nNeither chromaticity nor correlated color temperature uniquely determines a source's spectrum or how it renders illuminated objects."
    },
    {
      "heading": "Measurement and limitations",
      "text": "Chromaticity can be measured with a tristimulus colorimeter or calculated from spectral measurements made by a spectroradiometer. Colorimeters approximate standard-observer weighting functions with filtered detector responses; spectroradiometers measure the spectrum before numerical integration.\n\nImportant contributors to measurement uncertainty include spectral mismatch, wavelength calibration, stray light, detector nonlinearity, measurement geometry, and low signal levels. Near black, small signal errors can cause large changes in normalized chromaticity coordinates.\n\nA central limitation is metamerism: different spectra can produce the same tristimulus values and therefore the same chromaticity for a given observer. Such spectra may cease to match for another observer, or, for reflecting objects, under another illuminant.\n\nChromaticity also excludes luminance by construction. Two stimuli with identical chromaticity can differ substantially in perceived appearance because of their luminance, surroundings, adaptation state, or viewing size. Complete appearance prediction therefore requires more information than a position on a chromaticity diagram."
    }
  ],
  "links": [
    "light",
    "calibration",
    "scattering",
    "cieluv",
    "blackbody-radiation",
    "kelvin",
    "measurement-uncertainty"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}