{
  "id": "chemisorption",
  "title": "Chemisorption",
  "lang": "en",
  "source_lang": "en",
  "summary": "Chemisorption is adsorption involving chemical bond formation between an adsorbed species and a surface, central to catalysis, surface modification, and many separation processes.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Chemical adsorption"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/chemisorption/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/chemisorption/",
      "json": "https://aiwiki.page/zh/chemisorption.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Chemisorption is a form of adsorption in which an atom, molecule, or ion becomes attached to a surface through the formation of a chemical bond. The adsorbing material is the adsorbent, and the surface-bound species is the adsorbate. Unlike absorption, which involves entry into the bulk of a material, chemisorption occurs at an interface, including the internal surfaces of porous solids. It is central to heterogeneous catalysis, corrosion, thin-film growth, and the chemical modification of surfaces."
    },
    {
      "heading": "Bonding and surface structure",
      "text": "Chemisorption changes the electronic structure of both the adsorbate and the surface. It may involve electron sharing, charge transfer, or a combination of these, so the resulting bonds can have covalent, ionic, or metallic character. Adsorbate orbitals interact with electronic states of the substrate, forming bonding and antibonding combinations whose occupation helps determine the strength of attachment.\n\nThe bonding depends on the chemical identities of both partners and on the local arrangement of surface atoms. A crystalline material can expose different crystal faces, each with a distinct arrangement and coordination of atoms. Steps, edges, vacancies, and other defects often bind adsorbates differently from flat terraces. Consequently, a single material can have a distribution of adsorption energies rather than one characteristic value.\n\nAdsorbates may occupy sites directly above individual surface atoms or bridge between two or more atoms. Their preferred positions and orientations can change as the surface becomes more crowded. Chemisorption can also move substrate atoms, reconstruct a surface, or change its electronic properties.\n\nTwo broad forms are distinguished:\n\n- Molecular, or nondissociative, chemisorption: a molecule binds while retaining its basic molecular identity. Carbon monoxide on many metal surfaces is a common example.\n- Dissociative chemisorption: one or more bonds within an incoming molecule break, producing surface-bound fragments. For example, hydrogen can dissociate on platinum or nickel into adsorbed hydrogen atoms.\n\nDissociation is not required for chemisorption. Conversely, adsorption that strongly distorts a molecule is not necessarily dissociative."
    },
    {
      "heading": "Distinction from physisorption",
      "text": "Physisorption is adsorption dominated by interactions such as van der Waals forces, without the chemical bonding characteristic of chemisorption. The distinction concerns the nature of the interaction, not simply its strength.\n\nProperty | Chemisorption | Physisorption\nDominant interaction | Chemical bonding to the surface | Intermolecular interactions without chemical bond formation\nChemical specificity | Often strongly dependent on adsorbate and surface chemistry | Generally less chemically specific\nElectronic structure | Substantial changes associated with bonding | Usually smaller perturbations\nActivation barrier | May be present, particularly for dissociation | Often small for initial attachment, though access to pores can be restricted\nLayer formation | Usually limited by available bonding sites | Can produce multilayers and pore filling\nDesorption | May require substantial heating or involve reaction | Often occurs more readily when temperature rises or pressure falls\n\nThese are tendencies rather than absolute tests. A large adsorption energy alone does not establish chemisorption: confinement in narrow pores and strong electrostatic interactions can also produce strong physical adsorption. Likewise, chemisorption need not be irreversible or require a large activation barrier.\n\nA chemisorbed layer is commonly described as a monolayer, but this does not necessarily mean one adsorbate per surface atom. A molecule may occupy several sites, and steric crowding can prevent complete occupation. Additional molecules may physisorb above a chemisorbed layer."
    },
    {
      "heading": "Energetics and kinetics",
      "text": "Thermodynamic driving force\n\nAt specified conditions, adsorption equilibrium is governed by Gibbs free energy. Using a consistent standard-state convention,\n\n\\[\\Delta G_{\\mathrm{ads}}^\\circ = \\Delta H_{\\mathrm{ads}}^\\circ - T\\Delta S_{\\mathrm{ads}}^\\circ,\\]\n\nwhere \\(\\Delta H_{\\mathrm{ads}}^\\circ\\) is the standard adsorption enthalpy, \\(\\Delta S_{\\mathrm{ads}}^\\circ\\) is the standard adsorption entropy, and \\(T\\) is absolute temperature.\n\nChemisorption is commonly exothermic because surface bonds form. Adsorption from a gas also usually reduces the translational freedom of the adsorbing species, giving an unfavorable entropy contribution. Surface rearrangement, molecular dissociation, and displacement of previously adsorbed species can complicate this picture.\n\nFor an exothermic adsorption equilibrium, increasing temperature generally reduces equilibrium uptake at fixed gas pressure. Nevertheless, measured uptake may initially increase with temperature if heating allows molecules to overcome an adsorption barrier or enter otherwise inaccessible regions.\n\nReported “adsorption energies” require attention to definitions. Some conventions assign a negative value to energetically favorable adsorption; others report a positive binding energy. Electronic energies calculated for stationary structures also differ from finite-temperature adsorption enthalpies and free energies.\n\nActivation and sticking\n\nChemisorption may require activation energy, particularly when molecular bonds must be broken. An incoming molecule can first enter a weakly bound precursor state, move across the surface, and then become chemisorbed. Other systems permit direct chemisorption without a long-lived precursor.\n\nThe sticking coefficient is the fraction of incident particles that become adsorbed under specified conditions. It depends on factors including surface coverage, incident energy, molecular orientation, surface temperature, and contamination. It need not equal one even when adsorption is thermodynamically favorable.\n\nDesorption is the reverse process. Dissociated fragments may first recombine before leaving as a molecule. Alternatively, an adsorbate may react or decompose, so heating does not necessarily restore the original gas-phase species. Rates are described within chemical kinetics, and barriers to adsorption and desorption must be distinguished from equilibrium binding strengths."
    },
    {
      "heading": "Coverage and adsorption isotherms",
      "text": "Surface coverage, usually written \\(\\theta\\), expresses occupation relative to a defined reference capacity. Its definition must specify whether it counts molecules, atoms, or occupied sites.\n\nThe Langmuir adsorption model provides a simple description of adsorption on equivalent, independent sites. For nondissociative adsorption,\n\n\\[A(g)+* \\rightleftharpoons A*,\\]\n\nwhere \\(*\\) denotes an empty site and \\(A*\\) an adsorbed species. If each molecule occupies one site and adsorbates do not interact, then\n\n\\[\\frac{\\theta}{1-\\theta}=Ka_A,\\]\n\nand hence\n\n\\[\\theta=\\frac{Ka_A}{1+Ka_A}.\\]\n\nHere \\(K\\) is a dimensionless equilibrium constant and \\(a_A\\) is the dimensionless activity of the gas. For an ideal gas, \\(a_A=p_A/p^\\circ\\), where \\(p_A\\) is its partial pressure and \\(p^\\circ\\) the standard pressure.\n\nFor dissociative adsorption on two equivalent sites,\n\n\\[A_2(g)+2* \\rightleftharpoons 2A*,\\]\n\nthe corresponding idealized result is\n\n\\[\\frac{\\theta}{1-\\theta} = \\sqrt{Ka_{A_2}},\\]\n\nso that\n\n\\[\\theta= \\frac{\\sqrt{Ka_{A_2}}} {1+\\sqrt{Ka_{A_2}}}.\\]\n\nThis expression assumes that the required site pairs are available and can be treated within the model’s independent-site approximation.\n\nReal surfaces often depart from these assumptions. Different sites can have different binding strengths; adsorbates can attract or repel one another; and multiple species can compete for sites. Surface reconstruction and requirements for adjacent vacant sites introduce further complexity. A good fit to a Langmuir equation therefore does not, by itself, prove a particular microscopic adsorption mechanism."
    },
    {
      "heading": "Role in catalysis and surface reactions",
      "text": "Chemisorption is a central step in heterogeneous catalysis, where reactants interact with a catalyst in a different phase. Binding to a surface can weaken bonds within a reactant, bring species into favorable configurations, and provide a sequence of reaction steps with lower barriers than an uncatalyzed pathway.\n\nTwo common mechanistic descriptions are:\n\n- Langmuir–Hinshelwood mechanism: both reacting species are adsorbed before they react.\n- Eley–Rideal mechanism: a species from the gas or liquid phase reacts directly with an adsorbed species.\n\nThese are useful limiting descriptions; actual reaction networks can include precursor states, surface migration, and several competing intermediates.\n\nAdsorption must generally be strong enough to activate reactants but weak enough to permit subsequent reaction and product release. This balance is expressed by the Sabatier principle. Binding strength is therefore an important catalyst-design descriptor, although it is not sufficient on its own to predict catalytic performance.\n\nIndustrial ammonia synthesis illustrates the importance of dissociative adsorption: the catalyst assists the cleavage of nitrogen molecules, followed by surface hydrogenation steps. In other processes, excessively stable adsorbates block active sites and cause catalyst poisoning. Chemisorption can thus promote a reaction or suppress it, depending on the adsorbed species and conditions."
    },
    {
      "heading": "Experimental characterization",
      "text": "No single measurement universally identifies chemisorption. Several complementary approaches are commonly used.\n\nAdsorption measurements. Volumetric and gravimetric methods determine uptake as a function of pressure and temperature. Selective chemisorption of probe gases can estimate the number of accessible sites on supported metal catalysts. Converting uptake into metal surface area or dispersion requires assumptions about adsorption stoichiometry, site accessibility, and whether the probe migrates from the metal onto the support.\n\nCalorimetry. Direct measurement of adsorption heat reveals how binding enthalpy changes with coverage. Strong initial adsorption followed by weaker uptake may indicate heterogeneous sites, although interactions between adsorbates can produce similar trends.\n\nTemperature-programmed desorption. A precovered surface is heated while desorbing species are monitored, often by mass spectrometry. Peak shapes and temperatures contain information about desorption kinetics, but interpretation depends on heating rate, reaction order, prefactors, readsorption, and possible decomposition. A desorption peak temperature is not itself a binding energy.\n\nInfrared spectroscopy. Changes in vibrational frequencies can identify adsorbed molecules, bonding geometries, and reaction intermediates. For example, adsorbed carbon monoxide has vibrations sensitive to its interaction with a metal surface.\n\nX-ray photoelectron spectroscopy. Core-level binding energies and spectral intensities provide information about surface composition and chemical states. Interpretation must account for charging and other contributions to measured shifts.\n\nSurface diffraction, microscopy, and measurements under operating conditions can establish where adsorbates reside and whether structures observed in vacuum persist in reactive environments. Computational methods complement these experiments by predicting adsorption geometries, energies, and reaction pathways."
    },
    {
      "heading": "Applications and limits of the concept",
      "text": "Beyond catalysis, chemisorption is used to attach functional groups to surfaces, prepare self-assembled molecular layers, and control film growth in atomic layer deposition. It also contributes to selective gas capture, chemical sensing, and adhesion at interfaces.\n\nIn electrochemistry, adsorption at an electrode can depend strongly on electrode potential, solvent, and competing ions. Models developed for clean surfaces in vacuum may therefore require substantial modification for solid–liquid interfaces.\n\nA practical boundary issue is distinguishing chemisorption from bulk chemical reaction. Initial surface binding can be followed by diffusion into the solid, oxide growth, compound formation, or extensive structural transformation. Such uptake cannot always be represented as occupation of a fixed number of surface sites.\n\nThe interpretation of chemisorption consequently depends on the material, adsorbate, coverage, temperature, pressure, and surrounding medium. Labels such as “strong adsorption,” “irreversible uptake,” or “monolayer formation” are not sufficient evidence on their own; establishing the bonding mechanism generally requires structural, spectroscopic, thermodynamic, or kinetic information."
    },
    {
      "heading": "Historical development",
      "text": "Early studies of gas uptake by solids and of contact catalysis established the importance of surface attachment. In 1918, Irving Langmuir published a major treatment of adsorption on plane surfaces, formalizing a model based on localized sites and saturation coverage.\n\nLater developments in vacuum technology, electron spectroscopy, diffraction, and molecular-beam experiments made it possible to distinguish adsorption states and relate their behavior to atomic-scale surface structure. Modern research extends these approaches to porous materials, nanoparticles, electrochemical interfaces, and surfaces examined under reaction conditions."
    }
  ],
  "links": [
    "adsorption",
    "chemical-bond",
    "hydrogen",
    "physisorption",
    "van-der-waals-forces",
    "gibbs-free-energy",
    "enthalpy",
    "entropy",
    "activation-energy",
    "chemical-kinetics",
    "langmuir-adsorption-model",
    "equilibrium-constant",
    "thermodynamic-activity",
    "pressure",
    "catalysis",
    "ammonia",
    "nitrogen",
    "calorimetry",
    "mass-spectrometry",
    "infrared-spectroscopy",
    "electrochemistry",
    "electrode"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}