{
  "id": "chemical-formula",
  "title": "Chemical Formula",
  "lang": "en",
  "source_lang": "en",
  "summary": "A chemical formula represents a substance’s elemental composition and may also convey atomic connectivity, charge, isotopic identity, or structural organization.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "chemical formula notation"
  ],
  "generated_at": "2026-11-02",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/chemical-formula/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/chemical-formula/",
      "json": "https://aiwiki.page/zh/chemical-formula.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A chemical formula is a symbolic representation of the composition of a chemical substance or species. It uses symbols for chemical elements, usually accompanied by numerical subscripts, to indicate the kinds and relative numbers of atoms present. Depending on its form, it may describe an individual molecule, an ion, the simplest composition of an extended solid, or a repeating unit in a large molecular chain. Thus, \\(\\mathrm{H_2O}\\) identifies water as containing hydrogen and oxygen in a ratio of two atoms to one, whereas \\(\\mathrm{NaCl}\\) expresses the one-to-one composition of sodium chloride without implying that an ordinary salt crystal consists of separate NaCl molecules.\n\nChemical formulas provide a shared language for chemistry. They connect the identification of substances with measurements of composition, the interpretation of molecular structure, and quantitative descriptions of chemical reactions. Different kinds of formula answer different questions: an empirical formula gives the simplest elemental ratio, a molecular formula gives the actual atomic composition of a molecule, and a structural formula conveys information about bonding. No single notation necessarily specifies every chemically important feature, such as three-dimensional arrangement, crystal structure, or the distribution of electrons."
    },
    {
      "heading": "Historical development of formula notation",
      "text": "Modern chemical formulas emerged from the replacement of qualitative substance symbols by a quantitative account of elemental composition. Alchemical and early chemical writing used pictorial signs for metals, substances, and operations, but these did not constitute a general system for expressing atomic ratios. In the late eighteenth century, Antoine Lavoisier and his collaborators helped establish a systematic chemical vocabulary grounded in the distinction between elements and compounds. Their Méthode de nomenclature chimique, published in 1787, reorganized chemical naming around composition, although present-day formulas developed through subsequent work.\n\nThe interpretation of composition in atomic terms became central in the early nineteenth century. Joseph Proust’s work on definite proportions supported the proposition that a pure compound has a characteristic elemental mass composition. John Dalton’s atomic theory, presented in the first decade of the nineteenth century and developed in his A New System of Chemical Philosophy from 1808, explained such regularities through combinations of atoms. Dalton used circular pictorial symbols for elements. His assumptions about the simplest combinations sometimes produced incorrect formulas: water, for example, was initially treated as a compound containing one hydrogen atom and one oxygen atom.\n\nJöns Jacob Berzelius introduced an alphabetic system in publications of 1813–1814, using letters derived mainly from element names. This approach was easier to print and extend than pictorial notation. Several symbols preserve Latin names, including \\(\\mathrm{Fe}\\) from ferrum, \\(\\mathrm{Na}\\) from natrium, and \\(\\mathrm{K}\\) from kalium. The placement and interpretation of numerical indices evolved before the modern use of lower-right subscripts became standard.\n\nReliable formulas also required a clear distinction between atoms and molecules. Amedeo Avogadro proposed in 1811 that equal volumes of gases at the same temperature and pressure contain equal numbers of molecules. Stanislao Cannizzaro’s 1858 exposition used this principle to distinguish atomic and molecular masses more consistently. The circulation of his ideas at the Karlsruhe Congress of 1860 helped resolve disagreements that had allowed different formulas to be assigned to the same substances.\n\nDuring the nineteenth century, formulas increasingly represented connectivity rather than composition alone. Work on valence and chemical structure by figures including August Kekulé, Archibald Scott Couper, and Aleksandr Butlerov helped explain why substances with identical elemental compositions could behave differently. Later developments in stereochemistry and electronic theories of the chemical bond added further layers of representation. Modern formula notation consequently incorporates several historically distinct ideas: elemental identity, atomic proportions, molecular size, connectivity, and spatial arrangement."
    },
    {
      "heading": "Symbols, subscripts, and the grammar of formulas",
      "text": "An element symbol begins with a capital letter and, when it contains a second letter, continues with a lowercase letter. Capitalization is chemically significant: \\(\\mathrm{Co}\\) denotes cobalt, whereas \\(\\mathrm{CO}\\) denotes carbon monoxide. A lower-right subscript applies to the immediately preceding symbol or bracketed group. In \\(\\mathrm{CO_2}\\), there is one carbon atom and two oxygen atoms; a subscript of one is normally omitted. A formula without subscripts can therefore still convey a definite composition, as in \\(\\mathrm{CO}\\).\n\nParentheses and brackets group atoms whose multiplicity must be specified together. Calcium hydroxide, \\(\\mathrm{Ca(OH)_2}\\), contains two oxygen atoms and two hydrogen atoms for each calcium atom. Aluminum sulfate, \\(\\mathrm{Al_2(SO_4)_3}\\), contains two aluminum, three sulfur, and twelve oxygen atoms per formula unit. Brackets can also identify a chemically meaningful entity rather than merely simplify counting, especially in formulas containing complex ions.\n\nA number placed before a formula is a coefficient, not part of the formula itself. In\n\n\\[2\\mathrm{H_2}+\\mathrm{O_2}\\rightarrow 2\\mathrm{H_2O},\\]\n\nthe coefficient two multiplies the entire composition of water. Changing a coefficient changes the quantity of a species represented; changing a subscript changes its composition. Thus, \\(\\mathrm{H_2O_2}\\) is hydrogen peroxide, not a notation for two water molecules. This distinction is fundamental to reading a chemical equation.\n\nA centered dot commonly joins components of an addition compound, especially a hydrate. Copper(II) sulfate pentahydrate is written \\(\\mathrm{CuSO_4\\cdot5H_2O}\\). The formula specifies five water molecules per copper sulfate formula unit in the crystalline material, although it does not fully describe how those water molecules interact with copper and the crystal lattice. The dot is not an ordinary multiplication sign in the name of the substance, but its components must all be counted when calculating composition.\n\nAdditional markings encode information beyond ordinary elemental proportions. Ionic charge appears at the upper right, as in \\(\\mathrm{Ca^{2+}}\\) or \\(\\mathrm{SO_4^{2-}}\\). An isotope is identified by its mass number at the upper left, as in \\({}^{13}\\mathrm{C}\\); the lower-left atomic number may also be supplied, as in \\({}^{13}_{6}\\mathrm{C}\\). Labels such as \\((s)\\), \\((l)\\), \\((g)\\), and \\((aq)\\) indicate solid, liquid, gas, and aqueous conditions in equations, rather than changing the underlying elemental formula.\n\nElement order follows conventions that depend on context. In many inorganic formulas, an electropositive component precedes an electronegative one. Database indexes frequently use the Hill system: carbon first, hydrogen second, and other elements alphabetically when carbon is present; otherwise, all elements alphabetically. These ordering systems facilitate communication and retrieval, but they do not by themselves establish molecular connectivity."
    },
    {
      "heading": "Empirical formulas, molecular formulas, and formula units",
      "text": "An empirical formula expresses the simplest whole-number ratio of the elements in a substance. A molecular formula states the actual number of atoms of each element in one molecule. For glucose, the molecular formula is \\(\\mathrm{C_6H_{12}O_6}\\), while the empirical formula is \\(\\mathrm{CH_2O}\\). The same empirical formula also applies to other compounds, including acetic acid, whose molecular formula is \\(\\mathrm{C_2H_4O_2}\\). An empirical formula therefore does not uniquely identify a substance.\n\nFor a discrete molecule, the relationship is\n\n\\[\\text{molecular formula}=(\\text{empirical formula})_k,\\]\n\nwhere \\(k\\) is a positive integer multiplying every atomic count. If the empirical composition is \\(\\mathrm{CH_2O}\\), its corresponding molar mass is approximately \\(30.03\\ \\mathrm{g\\,mol^{-1}}\\). An independently determined molecular molar mass of approximately \\(180.16\\ \\mathrm{g\\,mol^{-1}}\\) gives \\(k=6\\), yielding \\(\\mathrm{C_6H_{12}O_6}\\). Composition and molecular mass together establish the molecular formula, but still do not establish the arrangement of its atoms.\n\nThe distinction is especially important for substances whose molecular formulas contain a common numerical factor. Hydrogen peroxide has molecular formula \\(\\mathrm{H_2O_2}\\) and empirical formula \\(\\mathrm{HO}\\). Benzene has molecular formula \\(\\mathrm{C_6H_6}\\) and empirical formula \\(\\mathrm{CH}\\). Reducing either molecular formula to its empirical form would discard information about molecular size. Conversely, a molecular formula such as \\(\\mathrm{H_2O}\\), whose subscripts have no common factor, is also an empirical formula.\n\nA formula unit is the specified compositional entity used to describe a substance that need not consist of discrete molecules. Sodium chloride is an extended ionic solid: its formula unit \\(\\mathrm{NaCl}\\) expresses one sodium ion for each chloride ion. Silicon dioxide, \\(\\mathrm{SiO_2}\\), commonly forms extended covalent structures rather than separate three-atom molecules. In quartz, each silicon is bonded to four oxygen atoms, and each oxygen is shared between two silicon centers, producing the overall ratio of one silicon to two oxygens.\n\nThe formula convention is not always the most reduced numerical ratio. Chemical practice may preserve a recognizable group or a selected structural unit. Sodium peroxide is written \\(\\mathrm{Na_2O_2}\\), retaining the peroxide group \\(\\mathrm{O_2^{2-}}\\), rather than reducing the notation to \\(\\mathrm{NaO}\\). Similarly, mineral and coordination formulas may emphasize meaningful constituent groups. Interpreting a formula therefore requires attention to what the notation is intended to represent: simplest composition, a molecule, an ionic grouping, or a conventional structural unit."
    },
    {
      "heading": "Structural formulas and the limits of elemental composition",
      "text": "A structural formula adds information about how atoms are connected. This is necessary because isomerism allows different substances to share a molecular formula. Ethanol and dimethyl ether both have molecular formula \\(\\mathrm{C_2H_6O}\\), but their condensed structural formulas are \\(\\mathrm{CH_3CH_2OH}\\) and \\(\\mathrm{CH_3OCH_3}\\), respectively. In ethanol, oxygen is bonded to a carbon atom and a hydrogen atom; in dimethyl ether, it is bonded to two carbon atoms. That difference changes their intermolecular interactions, physical properties, and chemical reactions.\n\nDisplayed formulas show atoms and bonds explicitly, while condensed formulas group atoms to reduce visual complexity. Acetic acid can be written \\(\\mathrm{CH_3COOH}\\), or more explicitly as \\(\\mathrm{CH_3C(=O)OH}\\), to emphasize the carbonyl and hydroxyl groups. Parentheses distinguish branches: \\(\\mathrm{CH_3CH(CH_3)CH_3}\\) represents 2-methylpropane. These notations convey connectivity that is absent from the molecular formula \\(\\mathrm{C_4H_{10}}\\), which also belongs to unbranched butane.\n\nSkeletal formulas are particularly important in organic chemistry. Lines represent bonds, and unlabeled line ends and vertices represent carbon atoms. Hydrogen atoms attached to carbon are usually omitted and inferred from normal valence, while atoms of other elements are generally shown. This convention makes large carbon frameworks readable, but it requires interpretation: the absence of a printed carbon symbol does not mean that carbon is absent from the structure.\n\nA Lewis structure can additionally show lone electron pairs and formal charges. Such representations are useful for reasoning about bonding and reactivity, but a single drawing may not capture delocalized electronic structure. In resonance, multiple contributing structures describe aspects of one electronic state; the substance does not rapidly alternate between those drawings. Benzene, for example, is not fully characterized by assigning permanently distinct alternating single and double bonds.\n\nConnectivity alone also leaves spatial distinctions unresolved. A pair of enantiomers has the same molecular formula and connectivity but opposite handedness. Wedge-and-dash bonds and stereochemical descriptors specify arrangements that ordinary composition formulas omit. Geometric isomers around a double bond likewise require additional notation.\n\nEven a detailed structural formula is a representation rather than a complete physical model. It generally does not specify all bond lengths, molecular motions, solvent interactions, or accessible conformations. Different structural drawings can represent the same molecule, and the information needed depends on whether the purpose is naming, explaining a reaction, predicting properties, or recording a measured structure."
    },
    {
      "heading": "Ions, charge balance, and coordination compounds",
      "text": "The formula of an ion combines elemental composition with net electric charge. A monatomic ion such as \\(\\mathrm{Na^+}\\) contains one atom with a net positive charge, whereas a polyatomic ion such as \\(\\mathrm{NH_4^+}\\) is a bonded group carrying one net positive charge. The charge of a polyatomic ion belongs to the complete entity, not necessarily to the atom nearest the printed superscript. A sulfate ion, \\(\\mathrm{SO_4^{2-}}\\), contains four oxygen atoms and has an overall charge of minus two elementary charges.\n\nFormulas of neutral ionic compounds must satisfy charge balance. If a cation has charge \\(+p\\) and an anion has charge \\(-q\\), their numbers must satisfy\n\n\\[n_{\\mathrm{cation}}p-n_{\\mathrm{anion}}q=0.\\]\n\nFor calcium and chloride, the relevant charges are \\(+2\\) and \\(-1\\), giving \\(\\mathrm{CaCl_2}\\). Aluminum and oxide have charges \\(+3\\) and \\(-2\\), giving \\(\\mathrm{Al_2O_3}\\). Calcium phosphate combines \\(\\mathrm{Ca^{2+}}\\) and \\(\\mathrm{PO_4^{3-}}\\) in the formula \\(\\mathrm{Ca_3(PO_4)_2}\\). These ratios express overall electrical neutrality, not the existence of isolated molecules with those compositions in the solid.\n\nCharge must be distinguished from oxidation state. Oxidation states are formal values assigned by an electron-accounting convention; they are not generally the actual charges on atoms within a molecule. In neutral \\(\\mathrm{CO_2}\\), carbon is assigned oxidation state \\(+4\\), yet the molecule has no overall charge and does not contain a bare \\(\\mathrm{C^{4+}}\\) ion. Roman numerals in names such as iron(III) chloride identify oxidation states and help distinguish \\(\\mathrm{FeCl_3}\\) from iron(II) chloride, \\(\\mathrm{FeCl_2}\\).\n\nIn coordination chemistry, square brackets commonly enclose a metal center and its attached ligands. The compound \\(\\mathrm{[Co(NH_3)_6]Cl_3}\\) contains the complex cation \\(\\mathrm{[Co(NH_3)_6]^{3+}}\\) and three chloride counterions. By contrast, \\(\\mathrm{[Co(NH_3)_5Cl]Cl_2}\\) places one chloride ligand inside the coordination entity and two chloride ions outside it. The brackets therefore carry structural significance.\n\nCoordination formulas can still leave important distinctions unspecified. The formula \\(\\mathrm{[Pt(NH_3)_2Cl_2]}\\) does not by itself distinguish cis and trans arrangements around a square-planar platinum center. More complex notation or a structural drawing is required. Likewise, a charge-balanced formula cannot establish which ions remain associated in a particular solvent, whether a ligand exchanges rapidly, or which species predominate at a specified pH. Formula notation records a chosen chemical entity, while solution speciation depends on conditions and chemical equilibrium."
    },
    {
      "heading": "Extended solids, variable composition, and polymers",
      "text": "For an extended solid, a chemical formula usually describes compositional proportions rather than the dimensions of a self-contained particle. The formula \\(\\mathrm{SiO_2}\\) applies to quartz and several other crystalline forms of silica, although their atomic arrangements differ. Similarly, both diamond and graphite have the elemental formula \\(\\mathrm{C}\\), despite their very different bonding networks and physical properties. Composition alone therefore cannot distinguish polymorphs or allotropes.\n\nCrystallographic formulas can refer to a conventional structural unit, while a unit cell may contain several such units. In the rock-salt structure, the conventional cubic cell of sodium chloride contains four NaCl formula units. This does not change the chemical formula to \\(\\mathrm{Na_4Cl_4}\\): the unit cell is a repeating geometric construction, whereas \\(\\mathrm{NaCl}\\) records the compositional ratio. Crystal structure and chemical formula answer different questions, even when both are obtained from the same investigation.\n\nNot all solids have an exact, invariant ratio of small whole numbers. A non-stoichiometric compound can accommodate vacancies, changes in oxidation state, or partial occupation of atomic sites. Wüstite is often represented as \\(\\mathrm{Fe_{1-x}O}\\), reflecting iron deficiency relative to ideal \\(\\mathrm{FeO}\\). Its defect chemistry involves iron vacancies and some iron in the \\(+3\\) oxidation state. The variable \\(x\\) describes a composition range rather than a fractional iron atom in an isolated molecule.\n\nSubstitutional solid solutions are also expressed through variable formulas. The olivine series can be written \\(\\mathrm{(Mg,Fe)_2SiO_4}\\), indicating that magnesium and iron share cation positions. A more quantitative notation is \\(\\mathrm{Mg_{2-x}Fe_xSiO_4}\\), with \\(0\\leq x\\leq2\\) for the idealized series between the magnesium and iron end members. Such formulas require a stated convention: a decimal subscript may represent measured bulk composition or average site occupancy, rather than an exact count in a discrete entity.\n\nPolymer notation uses a different kind of repetition. Polyethylene is commonly represented as \\(\\mathrm{[-CH_2-CH_2-]_n}\\), where \\(n\\) is the number of repeating units in a chain. This expression emphasizes connectivity and repetition but omits end groups. A finite, saturated, acyclic chain containing \\(n\\) ethylene-derived units and terminated by hydrogen has composition \\(\\mathrm{C_{2n}H_{4n+2}}\\), not simply \\(\\mathrm{C_{2n}H_{4n}}\\).\n\nNatural macromolecules impose similar qualifications. The expression \\(\\mathrm{(C_6H_{10}O_5)_n}\\) captures the repeating composition of cellulose, but it does not completely specify chain ends, chain length, or organization in a fiber. A complete composition formula for a protein depends on its amino-acid sequence and any modifications, while the formula alone does not reveal that sequence. For large or compositionally distributed materials, repeating-unit notation and structural descriptions are often more informative than one enormous elemental formula."
    },
    {
      "heading": "Experimental determination and verification",
      "text": "A chemical formula is an interpretation of experimental evidence, not merely a symbolic name. Classical elemental analysis determines the mass fractions of the constituent elements. In combustion analysis of an organic compound, measured amounts of carbon dioxide and water can establish the quantities of carbon and hydrogen originally present. Other elements require appropriate analytical methods; oxygen has sometimes been estimated by difference, but that procedure depends on the completeness and accuracy of the other measurements.\n\nTo obtain an empirical formula, each measured elemental mass is divided by the corresponding atomic molar mass, and the resulting amounts are compared. Suppose a compound contains approximately 40.00% carbon, 6.71% hydrogen, and 53.29% oxygen by mass. Taking a 100 g basis gives approximately\n\n\\[n_{\\mathrm C}=3.33\\ \\mathrm{mol},\\qquad n_{\\mathrm H}=6.66\\ \\mathrm{mol},\\qquad n_{\\mathrm O}=3.33\\ \\mathrm{mol}.\\]\n\nDividing by the smallest value gives the ratio \\(1:2:1\\), hence \\(\\mathrm{CH_2O}\\). Ratios near simple fractions require multiplication of all terms: \\(1:1.5\\), for example, corresponds to \\(2:3\\). Experimental uncertainty must be considered rather than forcing poorly determined numbers into a small-integer pattern.\n\nAn independent molecular mass measurement distinguishes possible multiples of an empirical formula. Historically, gas density and colligative properties were important for this purpose. Modern mass spectrometry can measure mass-to-charge ratios with high precision and constrain candidate compositions through exact mass and isotope patterns. Because isotopes of different elements have different exact masses, formulas with the same nominal integer mass can often be distinguished.\n\nA mass spectrum does not automatically provide the formula of an uncharged molecule. The detected species may be a molecular radical cation, a protonated molecule, a deprotonated molecule, a sodium adduct, or a fragment. For a singly protonated molecule, the measured mass-to-charge value corresponds approximately to the neutral monoisotopic mass plus the mass of a proton. Multiple charging and isotope distributions must also be interpreted correctly.\n\nOther techniques determine or test structural information. Nuclear magnetic resonance reveals local atomic environments and relationships between nuclei; infrared spectroscopy helps identify characteristic bond vibrations. X-ray crystallography can establish atomic arrangement and site occupancies, although hydrogen positions and disordered regions may be difficult to determine accurately.\n\nReliable assignment combines methods suited to the material. A mixture can produce an elemental analysis resembling a single compound, and absorbed solvent or water can shift measured percentages. A matching molecular formula does not prove a proposed structure, while a plausible structure does not excuse inconsistent composition. Formula determination therefore involves both quantitative composition and evidence that the analyzed sample corresponds to the intended chemical species."
    },
    {
      "heading": "Quantitative calculations, naming, and digital identification",
      "text": "Chemical formulas connect atomic composition with measurable quantities. The molar mass of a specified entity is calculated by summing the atomic molar masses of its constituent atoms:\n\n\\[M=\\sum_i \\nu_i M_i,\\]\n\nwhere \\(\\nu_i\\) is the number of atoms of element \\(i\\) in the entity and \\(M_i\\) is the corresponding atomic molar mass. Using conventional rounded atomic weights gives approximately \\(18.015\\ \\mathrm{g\\,mol^{-1}}\\) for water. Isotopically enriched material requires its actual isotopic composition to be considered; an average molar mass based on natural terrestrial abundances is not interchangeable with an exact isotopic mass.\n\nThe mass fraction of an element follows from the same formula:\n\n\\[w_i=\\frac{\\nu_i M_i}{M}.\\]\n\nFor water, oxygen contributes approximately 88.8% of the mass even though it accounts for only one of every three atoms. Atomic proportions and mass proportions are therefore distinct. This calculation is also sensitive to hydration: anhydrous copper sulfate and copper sulfate pentahydrate have different molar masses and different copper mass fractions.\n\nIn stoichiometry, formulas provide the atom counts used to balance equations under conservation of mass. Ordinary chemical reactions rearrange atoms without changing their elemental identities. A balanced equation also conserves total charge when ionic species are included. For hydrogen combustion,\n\n\\[2\\mathrm{H_2}+\\mathrm{O_2}\\rightarrow2\\mathrm{H_2O},\\]\n\nthe coefficients give ratios of numbers of molecules or amounts of substance: two moles of hydrogen react with one mole of oxygen to form two moles of water. They do not give the same ratio of masses. Changing the formula of a reactant or product to make an equation balance would instead describe a different chemical process.\n\nFormulas and chemical nomenclature serve complementary purposes. A systematic name may encode connectivity, stereochemistry, or oxidation state that a molecular formula omits. Conversely, a formula can make elemental composition immediately visible when a long name does not. Neither should be treated as a universal substitute for the other, especially for isomers, coordination compounds, or materials of variable composition.\n\nDigital databases frequently store composition in Hill order for indexing and formula searches. Such a search returns candidate substances rather than a unique identity, because many structures can share one formula. Structure-oriented representations such as SMILES encode atoms, bonds, branching, rings, and, when specified, stereochemistry. The International Chemical Identifier, or InChI, organizes structural information into standardized layers. Both contain information beyond a simple elemental formula, although their treatment of matters such as aromaticity, charge, tautomerism, and stereochemistry follows particular conventions.\n\nA molecular formula is consequently a valuable computational constraint rather than a complete identifier. It can filter database candidates, test the consistency of an analytical result, or support atom accounting in a reaction record. Distinguishing the relevant isomer, salt form, hydrate, isotope composition, or solid phase still requires additional chemical information."
    }
  ],
  "links": [
    "chemical-element",
    "atom",
    "molecule",
    "ion",
    "water",
    "chemistry",
    "chemical-reaction",
    "antoine-lavoisier",
    "temperature",
    "pressure",
    "stereochemistry",
    "chemical-bond",
    "chemical-equation",
    "isotope",
    "mass-number",
    "atomic-number",
    "glucose",
    "isomerism",
    "ethanol",
    "organic-chemistry",
    "lewis-structure",
    "resonance-chemistry",
    "enantiomer",
    "electric-charge",
    "oxidation-state",
    "coordination-chemistry",
    "ligand",
    "solvent",
    "ph",
    "chemical-equilibrium",
    "diamond",
    "graphite",
    "unit-cell",
    "cellulose",
    "protein",
    "carbon-dioxide",
    "mass-spectrometry",
    "nuclear-magnetic-resonance",
    "infrared-spectroscopy",
    "x-ray-crystallography",
    "molar-mass",
    "stoichiometry",
    "conservation-of-mass",
    "amount-of-substance",
    "mole",
    "chemical-nomenclature"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}