{
  "id": "cellulose-acetate",
  "title": "Cellulose Acetate",
  "lang": "en",
  "source_lang": "en",
  "summary": "Cellulose acetate is a chemically modified cellulose used in textile fibers, cigarette filters, photographic films, molded plastics, and separation membranes.",
  "category": "technology",
  "subcategory": "materials",
  "type": "concept",
  "aliases": [
    "Cellulose ethanoate",
    "Acetyl cellulose"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/cellulose-acetate/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/cellulose-acetate/",
      "json": "https://aiwiki.page/zh/cellulose-acetate.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Cellulose acetate is a family of semisynthetic polymers produced by replacing some or nearly all of the hydroxyl groups in cellulose with acetate ester groups. Its properties depend on the extent of this substitution, the length of the polymer chains, and additives used during processing. Manufactured from purified plant cellulose, it can be made into fibers, transparent films, molded objects, coatings, and separation membranes. Major applications include cigarette filters, textile fibers, spectacle frames, and photographic film bases. Its plant-derived origin does not mean that every formulation biodegrades readily under ordinary environmental conditions."
    },
    {
      "heading": "Chemical structure and classification",
      "text": "Cellulose consists of long chains of glucose-derived units joined by β-1,4-glycosidic bonds. Each repeating anhydroglucose unit has three hydroxyl groups available for chemical modification. In cellulose acetate, some of these groups are converted into acetate esters through acetylation.\n\nThe average number of substituted hydroxyl groups per repeating unit is called the degree of substitution, or DS. It ranges from 0 for unmodified cellulose to a theoretical maximum of 3 for fully acetylated cellulose. An idealized repeat-unit formula is\n\n\\[\\left[\\mathrm{C_6H_7O_2(OH)_{3-x}(OCOCH_3)_x}\\right]_n,\\]\n\nwhere \\(x\\) represents the average degree of substitution and \\(n\\) the number of repeating units. Commercial materials contain a distribution of substitution patterns rather than necessarily identical repeating units.\n\nTwo broad commercial groups are important:\n\n- Secondary cellulose acetate, commonly called cellulose diacetate, is partially acetylated, often with a DS around 2.4–2.5. “Diacetate” is a commercial designation and does not necessarily indicate exactly two acetate groups on every unit.\n- Cellulose triacetate is more highly acetylated, generally with a DS close to 3. Its solvent requirements, moisture response, and thermal behavior differ from those of secondary acetate.\n\nAcetylation alters the network of hydrogen bonds that makes native cellulose difficult to dissolve and process. Substitution level therefore strongly affects solubility, water uptake, chain packing, and processing behavior. Cellulose acetate is chemically distinct from regenerated cellulose fibers, such as viscose rayon, in which cellulose is dissolved through intermediate processing steps and then regenerated without retaining acetate substituents."
    },
    {
      "heading": "Manufacture and processing",
      "text": "Acetylation and controlled hydrolysis\n\nIndustrial production commonly starts with high-purity wood pulp or cotton linters. The cellulose is conditioned, often with acetic acid, and reacted with acetic anhydride in the presence of an acid catalyst, commonly sulfuric acid.\n\nAn idealized reaction for one hydroxyl group is\n\n\\[\\mathrm{Cell{-}OH+(CH_3CO)_2O \\rightarrow Cell{-}OCOCH_3+CH_3COOH},\\]\n\nwhere \\(\\mathrm{Cell}\\) denotes the cellulose chain.\n\nConventional processes first produce a highly acetylated material. Controlled hydrolysis then removes some acetyl groups to obtain the desired substitution level. The polymer is subsequently precipitated, washed, stabilized, and dried. Reaction conditions must also limit unwanted cleavage of the cellulose backbone, which would reduce molecular weight and alter mechanical properties.\n\nConversion into products\n\nCellulose acetate is frequently processed from solution:\n\n- Dry spinning: a polymer solution passes through spinnerets, and solvent evaporates to leave continuous filaments. Secondary acetate is commonly spun from acetone-based solutions.\n- Film casting: a solution is spread onto a surface and dried to form a continuous sheet.\n- Membrane formation: controlled solvent exchange produces porous or asymmetric structures.\n- Plastic molding: suitable grades are compounded with plasticizers and other additives, allowing shaping by heat and pressure.\n\nSolvent recovery is an important part of industrial production. Processing conditions and solvent systems differ between secondary acetate and triacetate, so the two cannot always be substituted directly."
    },
    {
      "heading": "Properties",
      "text": "Cellulose acetate can be transparent, readily colored, smooth-surfaced, and capable of producing lustrous fibers. Its mechanical behavior ranges from relatively rigid to flexible, depending particularly on molecular weight, substitution level, moisture, and plasticizer content.\n\nIts main characteristics include:\n\n- Optical clarity: suitable grades form clear films and polished molded articles.\n- Moisture sensitivity: residual hydroxyl groups interact with water, although acetylation generally reduces water affinity compared with unmodified cellulose.\n- Selective solubility: many secondary-acetate grades dissolve in acetone, whereas highly substituted triacetate generally requires different solvent systems.\n- Formulation-dependent thermal behavior: plasticizers lower the glass-transition temperature and facilitate processing. Unplasticized grades can be difficult to melt-process without degradation.\n- Chemical limitations: strong acids and bases can promote degradation, including cleavage of acetate groups.\n\nCellulose acetate is less readily ignited than cellulose nitrate, which it replaced in many film applications, but it remains combustible. It is not equivalent to acetate salts, nor is it the same material as polyvinyl acetate."
    },
    {
      "heading": "Historical development",
      "text": "French chemist Paul Schützenberger prepared cellulose acetate in 1865. Early materials were difficult to manufacture and process economically. Later advances in acetylation, controlled hydrolysis, and solvent processing enabled commercial production during the early twentieth century.\n\nAn important development was the production of partially hydrolyzed acetate soluble in acetone. This made fiber spinning and film manufacture more practical. Cellulose acetate also found use in aircraft fabric coatings, molded goods, and transparent sheet materials.\n\nDuring the twentieth century, acetate became an established textile fiber and an important base for photographic and motion-picture film. It provided an alternative to highly flammable cellulose nitrate film, although acetate film later proved vulnerable to a different form of chemical deterioration. Polyester subsequently displaced acetate in many film applications, while acetate retained substantial uses in fibers, filters, plastics, and membranes."
    },
    {
      "heading": "Major applications",
      "text": "Textile fibers\n\nAcetate fibers are used in linings, dresses, decorative fabrics, and other products where luster, drape, and a smooth feel are desirable. They are manufactured fibers derived from a natural polymer, rather than fully synthetic fibers made by building the entire polymer chain from small monomers.\n\nAcetate and triacetate fibers have different heat and moisture responses. Triacetate generally offers better dimensional stability under suitable heat-setting conditions. Their relatively low affinity for many water-soluble dyes makes disperse dyes important for coloration.\n\nCigarette filters\n\nCellulose acetate tow—a bundle of many fine filaments—is widely used to manufacture cigarette filters. The filaments are crimped and formed into a plug, often using triacetin as a plasticizer and bonding aid.\n\nFilter performance depends on filament geometry, packing, porosity, and airflow resistance. The presence of a filter does not make a cigarette safe; filtration of selected smoke constituents is distinct from eliminating the hazards of smoking.\n\nFilms and molded plastics\n\nCellulose acetate has been used for photographic negatives, motion-picture film, graphic-arts sheets, and other transparent supports. Film-grade triacetate has been particularly important in photographic and cinematographic applications.\n\nPlasticized acetate is also used in spectacle frames, handles, decorative objects, and specialty sheet products. Its ability to accept color and patterns, together with its polishability and machining characteristics, is especially useful in eyewear manufacturing.\n\nSeparation membranes\n\nCellulose acetate is an important material in membrane separation, including filtration and reverse osmosis. A major historical advance was the development of asymmetric membranes with a thin selective surface supported by a thicker porous region. This architecture combined useful selectivity with much higher flow rates than thick, uniformly dense films.\n\nSuch membranes have been used in desalination, water treatment, and gas separation. Performance depends on substitution level, membrane structure, operating pressure, temperature, and feed composition. Limitations include hydrolysis outside suitable pH ranges, fouling, and temperature constraints."
    },
    {
      "heading": "Deterioration and preservation",
      "text": "Cellulose acetate can undergo deacetylation, releasing acetic acid. In photographic and motion-picture collections, this deterioration is commonly called vinegar syndrome, referring to the characteristic odor.\n\nThe released acid can accelerate further degradation. Associated changes may include shrinkage, embrittlement, distortion, and loss or migration of plasticizers. Film damage can also involve separation or deformation of the image-bearing layers.\n\nTemperature, moisture, enclosure conditions, and the original formulation influence deterioration rates. Preservation programs for acetate-based cultural heritage therefore distinguish the chemical stability of the film support from the condition of the photographic image itself."
    },
    {
      "heading": "Environmental behavior and recovery",
      "text": "Cellulose acetate is often described as a bio-based plastic because its cellulose backbone comes from plants. That description concerns feedstock origin, not necessarily biodegradation rate or overall environmental impact. The acetylating chemicals, energy supply, solvents, additives, and product lifetime also affect its environmental profile.\n\nDegradation can involve removal of acetate groups followed by biological breakdown of the cellulose backbone. Its rate varies with substitution level, physical form, temperature, moisture, microbial activity, and access to light. Some formulations biodegrade under specified conditions, but this does not establish rapid decomposition in soil, seawater, or roadside litter.\n\nDiscarded cigarette filters are a prominent source of cellulose acetate litter. They can fragment into microplastics and may contain retained smoke residues. Visible disintegration is not the same as complete biodegradation or conversion into carbon dioxide, water, and biomass.\n\nClean manufacturing scrap can sometimes be reprocessed or dissolved for material recovery. Post-consumer recovery is more difficult when products contain mixed materials, dyes, coatings, or contamination. Claims of recyclability or compostability therefore depend on the particular formulation, collection system, and treatment conditions rather than on the name “cellulose acetate” alone."
    }
  ],
  "links": [
    "polymer",
    "cellulose",
    "hydrogen-bond",
    "wood-pulp",
    "hydrolysis",
    "glass-transition",
    "porosity",
    "reverse-osmosis",
    "desalination",
    "pressure",
    "ph",
    "vinegar-syndrome",
    "cultural-heritage"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}